Used Tube Straightening Machine for sale (64,961)

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Djdpfx Adjxn Aagepsup

Condition: ready for operation (used), Year of construction: 1998, Pressing force: 5000kN, max. operating pressure: 500bar, portal clearance: 2600mm, opening height: 470mm, max. straightening ram stroke: 500mm, min. edge distance: 375mm, rapid traverse: 450mm/min, straightening speed: 45mm/min, return speed: 1100mm/min, feed rate: 12m/min, max. feed force: 5000kN, table height: 1000mm. Machine dimensions X/Y/Z: approx. 4600mm/3250mm/3250mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Duodpfxjxlit Io Adpep

Year of construction: 1990, condition: ready for operation (used), Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement. Duedsxzikfopfx Adpjp

Condition: used, The RGM 2 is a state-of-the-art Tube End Finishing Machine designed by KNUTH, renowned for its robust and precise engineering. With a rigid design and a small footprint, this machine is perfectly suited for shops that require efficiency without sacrificing performance. The RGM 2 features an impact chuck at the front and a clamping chuck at the rear, ensuring secure handling of various tube sizes. Additionally, it includes a tube cutter and an inside tube deburrer, which provide a complete solution for finishing operations. For mobility, the machine is equipped with a mobile base. When looking for a reliable Tube End Finishing Machine, the RGM 2 stands out with its advanced features. Don't hesitate to request a quote today to enhance your tube processing capabilities with this exceptional product from the renowned KNUTH brand. Dusdpfjp Atgbox Adpop

Year of construction: 2002, condition: excellent (used), Manufacturer: GBS Year of manufacture: 2002 Weight: 350 kg Duedpfxsmv Hz Ij Adpop Working length: 3300mm Pipe thickness: 12 and 15 mm 2 heads, force: 2t

Condition: excellent (used), Max. external diameter: 75 mm Hydraulic pressure: 102 bar Safety pressure: 120 bar Tank capacity: 76 L CE standards Dimensions: 2200 × 830 × 1350 mm Weight: 1300 kg Dujdpfjw U Awajx Adpop

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller model: DELTA, pipe diameter (max.): 65 mm, pipe length (max.): 4,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 300 mm, bending radius (min.): 90 mm, mandrel length: 4,000 mm, number of axes: 3, total length: 5,500 mm, total width: 1,600 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 3 Axis 65 CNC Mandrel Tube Bending Machine TROX Liv Makina's most powerful machine is the CNC mandrel tube bending machine capable of bending tubes and profiles up to 65 mm with 3 axes, suitable for bending jobs in the Shipbuilding Industry, Thermal Power Plants, Park and Garden Furniture, Fitness Equipment, and Exhaust Industry sectors. What is difficult becomes easy thanks to hydraulic bending.  Ability to import drawings via Solidworks Program  Operation in fully automatic or manual modes via interactive PLC control system  Multiple language options  Ability to view products in 3D  3D pipe collision simulation  Automatic pipe length calculation  Conforms to CE norms  Ability to see errors on display  Safety warning system  Easy usability thanks to Livmak Interface Technical Specifications – TROX 3Axis 65 CNC Max Bending Capacity: Ø65 mm x 2 mm Min/Max Mold Diameter: 90/250 mm Material Processing Length: 4000 mm Dujdpfx Aeyhdzaedpep Machine Dimensions: 5500x1750x1750 mm Total Motor Power: 15 Hp Machine Weight: 3 Tons

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller model: DELTA, pipe diameter (max.): 38 mm, pipe length (max.): 4,000 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, bending radius (min.): 60 mm, mandrel length: 4,000 mm, number of axes: 5, working height: 1,500 mm, overall weight: 2,700 kg, total length: 5,500 mm, total width: 1,800 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 5 Axis 38 CNC Mandrel Tube Bending Machine PUMA Liv Makina’s 5-axis 38 mm CNC mandrel tube bending machine is one of the company’s models with the highest number of references spanning four continents in the Automotive, White Goods, and Defense Industry sectors. Its Solidworks-compatible interface ensures highly user-friendly operation. Our Industry 4.0-compliant machine provides daily reporting directly to your team. Thanks to its rolling die, the machine is capable of coiling tubes like a spring. Its feature of accommodating dies with 3 different radii makes even the most challenging bends much easier. The collision simulation software, which allows users to preview the bending process on-screen and helps save time, is provided free of charge on all of our CNC tube and profile bending machines.  Ability to import drawings to the machine via Solidworks  Fully automatic and manual operation modes with interactive PLC control system  Multiple language options  3D program visualization  3D pipe collision simulation visualization Duedpfeyhdx Ssx Adpep  Automatic tube length calculation  Compliant with CE standards  Error display on screen  Safety warning system  Easy operation via the Livmak interface Technical Specifications – PUMA 5 Axis 38 CNC Max Bending Capacity: Ø38 mm x 2 mm Min/Max Die Diameter: 60/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1600x1600 mm Total Motor Power: 15 Hp Machine Weight: 2.5 tons

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: BD38NCCOMP, bending angle (max.): 190 °, overall weight: 900 kg, total length: 3,100 mm, total width: 950 mm, total height: 1,500 mm, power: 6 kW (8.16 HP), input voltage: 220 V, type of input current: AC, warranty duration: 12 months, Semi-Automatic Single-Head Hydraulic Pipe Bending Machine BD50NC2A Machine Model: BD38NCCOMP Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Specification The largest applicable carbon steel pipe (bending radius ≥ 2d) Φ38×2.0mm (thickness Max. 2.0) The largest applicable stainless steel pipe (bending radius ≥ 2d) Φ38×1.5mm (thickness Max. 1.5) Maximum core length (*) 850mm Critical Parts and Functional Components Maximum bending radius (*) 320mm Maximum bend angle 190° The number of bends that can be set for each pipe fitting (*) 25 bends The number of pipe fitting files can be set 280 sets (extensible) Dsdpfx Adeya An Nepsup Working speed bending speed Max.90°/s Machine tool bending angle ±0.1°

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: BD63CNC4A2SP, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 63 mm, bending angle (max.): 190 °, overall weight: 1,800 kg, total length: 4,000 mm, total width: 1,000 mm, total height: 1,300 mm, power: 18 kW (24.47 HP), input voltage: 380 V, type of input current: AC, number of digital displays: 1, warranty duration: 12 months, Equipment: emergency stop, foot remote control, Full-Automatic Single-Head CNC Bending Machine with Auxiliary Push Function Machine Model: BD63CNC4A2SP Machine Applications  Transportation Sector For municipal engineering, locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Specification Model: BD63CNC4A2SP The Largest Applicable Carbon Steel, Copper, Aluminum Pipe or Profiles Φ63×2.0MM (THICKNESS MAX. 2.0) OR PROFILES AS PER MOLD DESIGN * The Largest Applicable Stainless Steel or High Alloy Steel Pipe, Profile Etc. Φ55×2.0MM (THICKNESS MAX. 2.0) OR PROFILES AS PER MOLD DESIGN * Maximum Reciprocating Feeding Pipe Φ63MM PROFILE AS PER MOLD DESIGN * Maximum Feeding Stokes (*) 3200MM Maximum Bending Radius (*) 550MM Maximum Bend Angle 190° Maximum Core Pulling Distance 3500MM Equipment Working Height 1300MM Pipe Bending Servo Power 7.0KW Pipe Bending Speed MAX. 150°/S ADJUSTABLE Bending Accuracy ±0.1° Feeding Servo Power 2.0KW Feeding Speed 200-1000MM/S ADJUSTABLE Feeding Accuracy ±0.1MM Rotation Servo Power 1.0KW Rotation Speed 180°/S ADJUSTABLE Rotation Accuracy ±0.1° Hydraulic Motor 7.5KW Hydraulic System Pressure 12 MPA Total Power 18 KW Equipment Size: Length * Width * Height 4000*1000*1300mm Equipment Weight 1800KG Duodpfxeyaz Ego Adpop

Condition: as good as new (ex-display), Year of construction: 2022, Stierli bender 820HE Horizontal bending and straightening machine, with manual control and stroke fine adjustment system STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 82 tons Tool height 300 mm Dodpfx Aogqfmnsdpeup Stroke 0-300 mm stepless Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Straightening power for HEA260 Bending and straightening program via selector switch Demonstration machine year 2022 incl. hand and foot pedal Machine as good as new

Condition: as good as new (ex-display), Year of construction: 2022, Stierli bender 420 CNC Horizontal bending machine, with Siemens controler Dsdpfx Aogqflqedpsup Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 42 tons Tool height 200 mm Stroke 0-300 mm stepless Bending capacity 200x24 mm S235 Straightening power for HEA180 Bending and straightening program via selector switch Demonstration machine year 2022 incl. hand and foot pedal Horizontalbendingmachine as good as new Please contact us for more information for this horizontal bender.

Condition: new, Year of construction: 2026, working width: 1,250 mm, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 5 mm, roller diameter: 35 mm, CLSM 1300×35 Sheet Straightening Machine The CLSM 1300×35 sheet straightening machine is a high-precision, industrial-grade system designed to eliminate deformations resulting from laser cutting, punching, and similar sheet metal processing operations. Thanks to its servo motor-controlled, multi-point adjustable straightening mechanism, it offers stable and repeatable straightening results for various sheet thicknesses and material types. The straightening rollers are manufactured from AISI 4140 material, induction-hardened to ensure long service life and reliable performance under intensive production conditions. Dodpeygnkpjfx Adpsup Its high-rigidity steel frame, which has undergone stress relief treatment, minimizes vibrations to guarantee precision straightening capability. Equipped with European-origin drive and electrical components, the CLSM 1300×35 provides user-friendly controls for easy adjustment and safe operation. Standard Equipment - Suitable for straightening sheets of designated quality and thickness according to the sheet straightening diagram - Specifically designed to correct deformations caused by laser and punch operations - Steel welded frame ensures high static and dynamic rigidity - All steel structural components are stress-relieved - Maximum sheet width straightening capacity: 1250 mm - Straightening gap is electromecanically adjusted by servo motors and servo reducers at 4 separate points - SIEMENS servo motors and EU-origin electrical components - 17 straightening rollers (AISI 4140 – induction hardened, ground) - Backlash-free and vibrationless motion enabled by MARIO FERRI (Italy) precision shafts and UNIMEC gear systems - 95 special support rollers under the straightening rollers prevent stress - Sheet thickness and correction parameters can be precisely set via the operator panel - Overload protection system Technical Specifications - Max. Working Width: 1250 mm - Min. Working Width: 70 mm - Material Thickness (Min.–Max.): 0.5 – 5.0 mm - Straightening Speed: 2.5 – 5.4 m/min (adjustable) - Number of Straightening Rollers: 17 (9 lower / 8 upper) - Roller Diameter: Ø35 mm (C4140 – induction hardened & ground) - Hardness: 60 HRC - Number of Support Rollers: 95 - Drive System: Gearmotor & inverter-controlled - Motor Power: 4 kW - Gap Adjustment System: Electromechanical (4 servo motors) - Adjustment Precision: 0.01 mm - Measuring System: Digital - Machine Dimensions (L × W × H): 3100 × 2000 × 2100 mm - Weight: 4200 kg Areas of Application - Sheet straightening after laser cutting - Sheet correction after punch cutting - Precision sheet metal processing lines - Industrial metalworking facilities - Mass-production sheet applications

Condition: good (used), Year of construction: 2007, machine/vehicle number: 25392, Offer 25392 Technical specifications: Duedpfeygk Ttjx Adpsp - 2 workstations for internal and external machining - Internal and external chamfering up to 4 mm - 2 working speeds: 100 + 200 rpm - 2 mounting spindles MK 3 - Drive: 400 V / 1.1 / 1.3 kW - Space requirement approx. W 500 x D 550 x H 700 mm - Weight approx. 70 kg - Workbench with 1 drawer and doors: W 1300 x D 840 x H 900 mm - Weight approx. 150 kg

Condition: like new (used), Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: SG202640, total length: 1,500 mm, power: 4 kW (5.44 HP), overall weight: 650 kg, total width: 800 mm, total height: 1,150 mm, input voltage: 380 V, warranty duration: 12 months, Pipe Shrinking, Profile Forming Machine SG40NC Machine Model: SG40NC Product Description: Microcomputer-controlled and hydraulically driven. Equipped with a mobile foot switch featuring three functions: automatic operation, emergency stop, and continuous emergency stop, ensuring high safety. Capable of multiple processing methods including tube Forming, tube expanding, tube end blunting, and bulging. Processed shapes include concave-convex joints, elongated, flat, square, flared, angled, V-shaped, open elbow, etc. Molds can be changed according to the Dsdpfx Aoyak Ikjdpsup user’s processed products. Mold replacement is simple and convenient, facilitating flexible production. The machine has a compact and sturdy structure, uses hydraulic power, operates stably with a high yield rate, minimal vibration, and low noise. It can perform tube end reduction, expansion, bulging, upsetting rib forming, and other shape forming processes. Suitable for processing various shapes at the connecting parts of pipe fittings (for insertion), automotive oil pipes, air ducts, water pipes, and air conditioning pipes. Maximum Tube Forming Capacity mm Ø40×2mm Maximum Tube Forming Length mm 100mm Motor Power kW 4 Weight kg 600

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: 2026BD25, bending angle (max.): 190 °, overall weight: 1,000 kg, total length: 1,800 mm, total width: 850 mm, total height: 1,230 mm, power: 8 kW (10.88 HP), input voltage: 380 V, type of input current: AC, warranty duration: 12 months, control cabinet height: 1,200 mm, Single - Head Servo CNC Pipe Bending Machine BD25CNC3A1S Machine Model: BD25CNC3A1S Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Maximum Bending Pipe Diameter × Wall Thickness (Normal Steel, Aluminum, Copper etc.) Φ25mm×1.2mm Maximum Bending Radius R150mm Maximum Bending Angle 190° Maximum Feeding Length 1200mm Working Speed: Bending Speed Max. 150°/s Working Speed: Pipe Rotating Speed Max. 200°/s Working Speed: Feeding Speed Max. 1000mm/s Working Precision: Bending Precision ±0.1° Working Precision: Pipe Rotating Precision ±0.1° Working Precision: Feeding Precision ±0.1mm Data Transmission Mode Dusdpfx Adjyak E Nepjp 1. Coordinates (X.Y.Z) 2. Working Values (Y.B.C) Bending Mode Servo Bending

Condition: new, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, bending angle (max.): 190 °, bending radius (max.): 250 mm, mandrel length: 2,100 mm, overall weight: 420 kg, total length: 2,400 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3.7 kW (5.03 HP), pressure (min.): 50 bar, pressure (max.): 220 bar, Equipment: CE marking, emergency stop, foot remote control, MBB 32 PLC – Hydraulic Mandrel Tube Bending Machine The MBB 32 PLC is a hydraulically driven tube bending machine specifically designed for mandrel tube bending applications. Its internal mandrel-supported bending system delivers precise, repeatable bends without cross-section deformation. This machine is engineered exclusively for tube bending applications, not for profile bending. Thanks to its PLC-controlled design and hydraulic clamping system, it is ideally suited for mass production and precision work. Standard Features - 1 set of mandrel tube bending dies in requested dimensions - Specially designed, direct-drive, gear-reduced bending system - 4.7” TFT touchscreen - Portable foot pedal with emergency stop - 100 program memory - Sequence of 10 bends per program - Hydraulic clamping system - High-precision tube bending thanks to braked motor - Manual back gauge device - Support roller - Safety interlocked electrical panel and safety switch - Overload protection - Electrical supply: 380 V / 3 Ph / 50 Hz - CE certified Optional Features - Additional sets of mandrel tube bending dies in desired sizes Technical Specifications – MBB 32 PLC - Max. Tube Outer Diameter: Ø32 × 3 mm - Max. Bending Radius: 250 mm - Max. Bending Angle: 190° - Hydraulic Pressure: 50 – 220 bar - Working Length: 2100 mm - Total Motor Power: 3.7 kW - Tank Capacity: 20 liters - Machine Dimensions (L × W × H): 2400 × 1200 × 1100 mm - Weight: 420 kg Dusdpfx Adsyghlyjpsp Areas of Application - Mandrel tube bending operations - Automotive sub-industry - Furniture and metal frame systems - HVAC and installation piping - Industrial metal tube production Production Note: This machine is manufactured by CRONOSSTECH in Turkey.

Condition: used, Year of construction: 1985, material width 500 mm coil weight 1,0 t material thickness 0,4 - 5,0 mm coil internal diameter 420 - 520 mm coil external diameter 1200 mm material cross-cut 1500 mm² no. of straightening rolls 9 number of draw-in rolls 2 speed 0 - 80 m/min Weight 1,70 t Dimensions (WxDxH) 2,7 x 1,3 x 1,9 m Weight 1,35 t dimensions 2,2 x 1,2 x 2,0 m Dujdpfxevut Hzs Adpop Straightening machine with infinitely variable drive, intermediate lifting of the inlet rolls, hydraulic threading wedge Decoiler with auxiliary drive, hydraulic centralized expansion, snubber roll

Condition: used, Year of construction: 1996, material width 500 mm coil weight 2,5 t material thickness 0,2 - 3,0 mm coil internal diameter 480 - 530 mm coil external diameter 1300 mm material cross-cut 1000 mm² no. of straightening rolls 10 straightening roll diameter 80 mm number of draw-in rolls 2 roll diameter 120 mm speed 20 m/min power requirement 4,0 + 1,1 kW weight of straightening machine 2,3 t dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm Dodpfjvut Rasx Adpoup weight of decoiler 0,95 t dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm Straightening machine BRMS 4/500/10 with infinitely variable drive Decoiler BSH 3-500 with main motor for fix speed, ausiliary drive (declutchable), pneumatic snubber roll coil loop control via light guard can be offered without putting into operation or with putting into operation in given condition video at seller's site before dismantling available

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2 x 2,0 t material thickness 0,4 - 3,0 mm coil internal diameter 460 - 530 mm coil external diameter 1500 mm material cross-cut 1200 mm² no. of straightening rolls 9 straightening roll diameter 30 mm speed 0 - 40 m/min Dodpfxjv Svaxs Adpoup power requirement 15,0 kW Weight 5,2 t Dimensions (WxDxH) 2,15 x 4,5 x 2,85 m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound

Condition: used, Year of construction: 1994, material width 500 mm coil weight 3,0 t material thickness 0,2 - 2,5 mm coil internal diameter 470 - 530 mm coil external diameter 1400 mm Dodpfx Aovut Eqjdpsup no. of straightening rolls 9 straightening roll diameter 40 mm number of inlet and outlet rolls 4 material cross-cut 1200 mm² speed 1,5 - 30 m/min dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m weight decoiler 1,1 t dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m weight straightener 3,0 t - Straightening machine RYD 40 x 500 with infinitely variable drive (driven lower straightening rolls), straightening rolls individually adjustable by motor, supporting rolls, outlet roller basket - Decoiler DY 500 x 3000 with hydraulic auxiliary drive, pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, hydraulic insertion aid, hydraulic coil lifting device - coil loop control can be offered without or with putting into operation in given condition

Condition: new, pressure 60 t stroke max. 300 mm bending capacity max. - flat 300 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 300 mm total power requirement 5,5 kW weight of the machine ca. 1530 kg The Gerd Wolff HP 60 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 60 is a multifunctional machine among all presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Dodpjxfb Iksfx Adpoup Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: used, functionality: fully functional, Year of construction: 1986, Mandrel bending machine Pipe bending machine Tracto Technik Tubomat 319MS90 6-42 mm Djdpfjvxuvfjx Adpeup (no tool accessories available)

Condition: refurbished (used), Tube Straightener VRM60/75, made by KIESERLING Tube diameter : 8 – 60 or 14 - 75 mm Tube length : Depending on accessories (loading table, channels). Minimum 0.5m Duedpfxjvtpghj Adpep The ratio diameter/thickness depends on the yield. Strength Example: - 300 N/mm2 = Max. 6.5mm - 400 N/mm2 = Max. 5.7mm - 500 N/mm2 = Max. 5.1mm - 600 N/mm2 = Max. 4.7mm *The first 4 photos are examples of revamping of similar machines that we can offer in case of interest. The following are pictures of the machine in its current state. Tube diameter: 8 – 60 or 14 - 75 mm Tube length: Depending on accessories (loading table, channels). Minimum 0.5m

Condition: used, Year of construction: 2007, pipe diameter (max.): 35 mm, overall weight: 2,700 kg, total length: 2,400 mm, total width: 1,400 mm, total height: 2,000 mm, Tube forming machine Dodjx Tt H Ropfx Adpeup Brand: BLM Model: TUBE-FORM Year: 2007 Serial number: 415050200004 Weight: 2700kg Power: 12KVA Three-phase 380V Dimensions: 2400x1400x2000(h)mm Maximum tube diameter: 35mm Pushing force: 3.5t Clamping force: 5t Max. working stroke: 130mm