Used Trimming for sale (2,078)

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, trimming unit from edge banding machine BRANDT KM 35 -Motor: Homag type LF-40-L -Power: 0.27 kW / 12000 rpm Lrodpfxogy T Nme Ap Dsn -Voltage: 220V / 200 Hz -Saw blade: Ø 90 mm -Individual components: see photos -Dimensions: 590/280 / H750 mm -Weight: 27 kg

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts -Frequency: Hz Lrsdpfob Uhpwex Ap Den -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1000/420/H655 mm -Weight: 140 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership Lrsdeb Uhrtepfx Ap Don -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1020/400/H700 mm -Weight: 110 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Cutting fixed lengths according to cut lists and cutting out defective sections Lodpfxox Da Tve Ap Djrn Cutting cycle: Defect trimming via chalk marking Cutting to fixed lengths, standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths with single piece loading WS.1 Through-feed crosscut saw 4 pcs. lower feed rollers 1 pc. loading table, 2 meters, right side, with dual marking table 1 pc. outfeed table, 1 meter, with rear stop Roller height adjustable manually 12 pcs. luminescent chalk sticks Cutting capacity: Position A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Position B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control system with: 7" color touchscreen Editing of cutting cycles directly on the machine Programming options: - Defect trimming via marking - Operation with cut list consisting of 10 dimensions; repeat option for each dimension; total number of pieces for each dimension 100 storage slots for cut lists Detection system for the last two pieces to be cut and the following piece Electronic control of sorting unit with No.1 ejection kicker (ejection kicker optional) Technical specifications: Feed system adjustable by motor, brushless and with toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm TCT blade diameter 500 mm Motor power 7.5 kW Cutting cycles per minute up to No. 100 Minimum workpiece length 550 mm Minimum workpiece width 40 mm Minimum workpiece thickness 15 mm On request: ZA295 Additional loading table with dual marking table ZA110 Outfeed table ZA058 TCT saw blade Ø 500 mm ZA296 Motorized adjustment of roller height

Condition: used, Ferwood Code: RU0008966 - Manufacturer Code: 4-075-01-0813 - Condition: Used - Compatible Machine: HOMAG EDGE BANDER - Weight: 5KG - Dimensions: 36X26X21 - If interested we offer a revision service, contact us. Lrodevazwrepfx Ap Don

Condition: used, functionality: unexamined, Ferwood code: AGG0059 - Manufacturer code: 1-056-11-0261 - Condition: Used - Functionality: Not tested - If interested, we offer refurbishment service, please contact us. Weight and transport dimensions: 9 kg, 46x39x27 cm Lrsdpfx Aevu Avrop Den

Condition: used, functionality: fully functional, Ferwood Code: RU0009619 - Manufacturer Code: - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC BIESSE ROVER A/B/C - If interested we offer an overhaul service, contact us. Ljdpfxov In E Se Ap Djrn

Condition: good (used), Further information available upon request. Lsdpfx Ajwkr Hdjp Dorn

Condition: used, Year of construction: 2014, machine/vehicle number: 201409V, SECOND-HAND SEMIAUTOMATIC TRIMMING MACHINE FOR STRAIGHT AND SHAPED PANELS MOD. VSR FRAVOL - CE RULES - KW 1,5 - Volt. 230/50 - Matr. 201409V Lredpswr Uhysfx Ap Don - Year 2014

Condition: refurbished (used), functionality: fully functional, Trimming head cpl. with diamond tools, fully reconditioned - Version for HOMAG/LEUCO i-System - top and bottom aggregates available - version for manual adjustment NOTE: the version for automatic (NC-) with HOMAG part number 2-055-05-3361 and -3371adjustment is currently not available. - various radii available (used diamond tools) - Suitable for HOMAG corner rounding units FK11 or FK13 It is recommended to order the trimming heads as a pair (1 x top, 1 x bottom), in case it is for the purpose of running a new profile / new radius. The stated prices include full reconditioning, new bearings, seals, cleaned and aligned. Lrsdpfotp I D Iox Ap Djn

Condition: used, Hydraulic cutter for Rifile and similar Lredpfxouk I Ubo Ap Den 49cm roller Maximum height of the piece cm. 25 complete with loading roller conveyor

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 9665, Equipment: freezer, Airproducts Cryo Trim S3 (800) (year 1992/refurbished 2018); serial no. 9665 - cleaning of frozen parts by blasting with plastic granulate (greater than 2 mm³ – CG 45 granulate or larger) - machine dimensions: height approx. 3.4 m, length (open or closed—does not change due to conveyor belt) approx. 4.1 m, machine width = conveyor belt approx. 2.8 m Lredpex A Sitjfx Ap Dsn

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height Lrjdjw Slwkopfx Ap Don • 750 mm passage width • Saw shaft newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing • 50 mm saw shaft diameter • Mechanical height adjustment of upper rollers • Vibratory chute in the machine • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop inspected • Machine newly painted • Approx. 5 m long roller table in front of the saw • Approx. 4 m long roller table after the saw

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, Wohlenberg 38FC Lredpszgx Nbefx Ap Djn Three-knife cutter Maximum uncut size: 315 × 410 mm Maximum cut size: 300 × 380 mm Minimum cut size: 50 × 80 mm Stack height (press height): max. 100 mm Mechanical speed: up to 1,080 cycles/hour

Condition: good (used), Year of construction: 2016, Ref:11076 . 2016 Muller Martini SIGMA Three Knife Trimmer On demand trimmer for digital dooks finishing Features: Designed for the finishing of both offset- and digitally-produced books in a one-off, short-, or large-run workflow. Fully-automated, one-off book 3-knife trimmer. Ultra-efficient digital book trimming system with zero makeready for optimal one-off book production. Lodjyw Hwdopfx Ap Dorn Workflow can be consolidated and efficiently processed through the SigmaTrimmer work center with minimal production planning effort & considerable labour savings. Bound, untrimmed books of varying sizes and thickness can be fed into the SigmaTrimmer continuously, without stopping to change parts or key in any data. Book printers can cut books of different formats and thicknesses in quick succession, without interruption. The format for each book is read with a barcode scanner during infeed and all settings are made automatically, which eliminates makeready time. Specification: Max speed: 1,000 cycles/hr Max untrimmed size: 320x240mm Min untrimmed size: 154x108mm Max book thickness: 40mm Min book thickness: 2mm Max Front trim: 86mm Min front trim: 3mm Max foot trim: 75mm Min foot trim: 3mm 5 x Sigma trimmers available, all the same age. Can be bought individually or as multiples.

Condition: good (used), Tranklein EK-D 100 Double Corner Trimmer Made in Germany by Karl Tranklein. Very good condition. This is a professional, production-grade corner rounding tool. Sturdy cast iron construction ensures precise operation. Two trimming heads. Interchangeable knives. Lrodpszdaxtefx Ap Don Adjustable margins. Includes one set of knives with an 8mm radius. Stack height: 100mm Weight: 140kg Cycles per minute: 50 cycles Power supply: 400V

Condition: used, Year of construction: 2009, Three knife trimmer Müller Martini Orbit (3675) Year: 2009 For three side trimming of book blocks and brochures, operable in connection with soft- and hardcover book production lines. Description: - Colour monitor with touchscreen - Infeed conveyor - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 72 mm Maximum size (cutted): 304 x 303 mm Minimum size (cutted): 136 x 70 mm Book thickness: 2 - 80 mm Max. mechanical speed: 1.000 to 7.000 cycles/hr Lredpfjwuthwsx Ap Dsn Condition: This machine is offered fully cleaned and checked in good running condition Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: used, Year of construction: 2001, Three knife trimmer Müller Martini Merit S Year: 2001 Hour counter: 30400 Description: - Digital display - Infeed conveyor from the left - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) Ledpfxsylblke Ap Djrn - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 434 x 310 x 80 mm Minimum size (cutted): 136 x 100 x 2 mm Max. mechanical speed: 1.000 - 4.000 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, MULLER MARTINI PERFECT LINE MACHINE LOT INCLUDES: PERFECT BINDER ROTORBINDER 10 CLAMPS (with extra stop system) GATHERING MACHINE WITH 12 STATIONS, MODELS 201 AND 2 (manual) TRANSFER SYSTEM TO ROTORBINDER THREE-KNIFE TRIMMER 3670, AUTOMATIC, WITH CASSETTE Lredpozdyx Sjfx Ap Djn THE PRICE INCLUDES DISMANTLING AND LOADING ONTO A TRUCK OR CONTAINER.

Condition: new, Year of construction: 2024, sorting line trimmer Lodpszbxxysfx Ap Dern

Condition: used, Technical details: electrics - voltage/frequency: 380 V/Hz total power requirement: 1,1 kW machine weight approx.: 18 kg dimensions L x W x H: 0,32 x 0,50 x 0,25 m EDGE BURRING MACHINE, table-top unit Application: chamfering, deburring Equipped with milling head Ø 65mm with carbide inserts Lredpeu Nggnofx Ap Djn Motor speed 2780 rpm. Workpiece holder via prism 45°, with 2 supports lxw: 500 x 40mm, rotatable 15° - 45° Milling bevel width max. 5.0mm, angle 15° - 45° *

Condition: good (used), Year of construction: 2006, Built in 2006 Size 310 x 430 x 80 mm Size trimmed 300 x 420 mm min 100 x 120 x 2 mm Feeding height max 80 mm Speed max 6.600 c/h Description: - Left hand infeed - Automatic hopper feeder for inline production Ljdpfx Aozbkmpep Djrn - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Condition Cleaned good working conditon

Year of construction: 1990, condition: good (used), strip width: 900 – 2.050 mm strip thickness: 1 – 6 mm edge strip width: 5 – 50 mm material (strength): 1.000 N/mm² Ledogrug Aopfx Ap Dorn

Year of construction: 1990, condition: good (used), strip width: 900 – 2.050 mm Lsdobicbzjpfx Ap Dern strip thickness: 1 – 6 mm edge strip width: 5 – 50 mm material (strength): 1.000 N/mm²

Condition: used, Three knife trimmer Wohlenberg 44 FO Year: Description: - Hand feeding - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Lredpfx Apoy T H Eyj Djn - Belt delivery Max. mechanical speed: 10 - 25 cuts/min Maximum size (uncutted): 315 x 460 mm Maximum size (cutted): 300 x 440 mm Minimum size (cutted): 70 x 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!