Edgebander
Brandt KDF 220 Highflex

Name: Brandt KDF 220 Highflex
Brand: Brandt
Price: 25500 EUR
Availability: InStock

Fixed price plus VAT

€25,500

Year of construction

2013

Condition

Used

Location

Langenfeld (Rheinland) Germany

Basic data

Machine type:: Edgebander

Manufacturer:: Brandt

Model:: KDF 220 Highflex

Year of construction:: 2013

Condition:: excellent (used)

Price & Location

Fixed price plus VAT

€25,500

Location:: Herzogstrasse 10a, 40764 Langenfeld, Deutschland

Call

Details about the offer

Listing ID:: A22722122

Update:: 22.10.2026

Description

Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Very highly automated.

A video of the machine in operation can be sent upon request.

Edge thickness: approx. 0.4 - 3 mm, solid edge up to 6 mm
Workpiece height: approx. 10 - 60 mm
Feed rate: approx. 10 m/min
Noise protection hood
Retractable workpiece support
Dust extraction connection: 1x120mm, 1x100mm, 3x80mm
Easy-Touch EC+ control panel for easy machine operation
4 programs can be saved.
Machine in Highflex version, highly automated, switching between thin and thick edges via programs.

Units:

Extended infeed zone
Chain track central lubrication, pneumatically manual
Glue pot quick-change device, currently one glue pot available
Top pressure: manual adjustment, PU rollers
Infeed guide: manual adjustment with SIKO counter for chip removal
Joining cutter with diamond cutters, sharpened
Contact heating plate for preheating the panel
Lodpfszzqwmsx Ab Aoru
Gluing section with automatic edge infeed for roll material up to 3 mm, switchable for direct and reverse operation
Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edges
Cut-off saw with 2 motors, straight or bevel cuts (program-controlled)
Combination routing unit, pneumatically controlled for flush trimming, chamfering, and radius
Corner rounding cutter R2 with diamond cutter with integrated sensing ring
Radius trimming blade R2, pneumatically retractable with quick-change device
Glue seam trimming blade with large roller, pneumatically controlled
Hood locking
CE marking

All indexable inserts of the routing units and trimming blades have been replaced or resharpened, saws have been sharpened, and diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been replaced, but it is still sharp.

Original paint, only a few spots have been touched up.
Unfortunately, the machine does not have an operating hour counter, but it still looks very good.
Very good condition, see original photos.

Machine dimensions: approx. 4550 x 1250 x 1550 mm (LxWxH)
Weight: approx. 1400 kg.

The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

The listing was translated automatically. Translation errors are possible.

Seller

Last online: A week ago

Registered since: 2006

26 listings online

Call

Send inquiry

Telephone & Fax

+49 2173 ... show

Fax:

These listings may also fit your interest.

Listing

Saerbeck

18,451 km

Edgebander
FelderTempora 45.03 L

€16,500

Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2019, Edge banding machine Manufacturer: Felder Type: Tempora 45.03 L Year of manufacture: 2019 Workpiece thickness: 8-45 mm Edge thickness: max. 3 mm Min. workpiece length: 140 mm Lrjdjzlr Nfopfx Ab Aju Feed rate: 9 m/min Total power consumption: 14.5 kW Number of workpieces: approx. 75,400 pieces Total edge length: approx. 59,300 m Jointing unit: Yes Miter saw unit: Yes Flush trimming unit: Yes Corner copying unit: Yes Radius drawing blade: Yes Straight drawing blade: Yes Buffing unit: Yes Spray device: Yes

See details

Listing

Renchen

18,693 km

Panel saw Martin T74

€12,800

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,900 kg, For sale: a very well-maintained Martin T74 panel saw. Features a touch-screen control panel, 5.7 inches. Cutting angle, height, and width are controlled electronically. Ljdozrmhiepfx Ab Ajru Motor: 5.5 kW. Saw blade change: quick-change system PRO Lock. No scoring saw. Slider length: 3000 mm. Max. saw blade diameter: 500 mm. Max. cutting height: 170 mm. Cutting width with fence: up to 1,100 mm. Saw blades up to 400 mm in diameter can be fully lowered below the table surface. Weight: 1,900 kg. Technical data sheet is available in the machine images (last image).

See details

Listing

Grooving and perforating machine Morgana RDC Die Cutter 3852

Grünstadt

18,622 km

Grooving and perforating machine
MorganaRDC Die Cutter 3852

€49,000

~~€59,900~~

ONO plus VAT

Call

Condition: like new (used), Year of construction: 2024, operating hours: 80 h, functionality: fully functional, machine/vehicle number: Seriennr. 3073196, working width: 380 mm, type of input current: AC, input voltage: 220 V, total width: 800 mm, total length: 2,820 mm, total height: 1,070 mm, stack height: 400 mm, Equipment: safety light barrier, The Morgana RDC 3852 is a digital rotary die-cutter for print finishing, enabling die-cutting, kiss-cutting, creasing, and perforating in a single pass—ideal for the digital print market and short runs. It utilizes flexible magnetic dies and features an air suction feeder for materials up to 400 gsm (up to 368x508 mm), an automatic waste stripper, and rapid job changeover, making it highly efficient for producing tailored products such as labels, cards, and tickets. Lrodpfxox Syvce Ab Aju

See details

Listing

Unloader / palletiser equipment Knorr ABS-145-G-3/L - refurbished-überholt

Dinslaken

18,544 km

Unloader / palletiser equipment
KnorrABS-145-G-3/L - refurbished-überholt

Call

Condition: reconditioned (used), Year of construction: 1999, Paper Unloader for High-Speed Guillotines – with Jogger and Bizerba Sheet-Counting Scale Automatic unloading and palletising after cutting Are you looking for an unloader for your guillotine, such as a Polar Transomat? This Knorr system can be used to unload your guillotine, offering a productivity-enhancing alternative to a pile lift. The Knorr unloader picks up the paper lifts using a clamp gripper and deposits them on the pallet with precise edge alignment. For this application, the unloader is positioned to the left of the guillotine. Additional application: Jogging and palletising counted paper sheets In combination with the included Knorr jogger and Bizerba sheet-counting scale, the system can also be used to stack and palletise counted batches of paper sheets. The sheet count is determined by weight using the paper-counting scale. The paper lift is then precisely aligned in the automatic jogger, and trapped air is expelled using the air-expulsion roller. The unloader picks up the prepared lift with its clamp gripper and deposits it on the pallet with precise edge alignment. The system offered comprises: - Knorr unloader with clamp gripper - Knorr automatic jogger with air-expulsion roller Lrsdehfhtkopfx Ab Aou - Bizerba ITS industrial sheet-counting scale Please let us know how you intend to use the system so that we can discuss the appropriate integration into your production workflow.

See details

Listing

Collecting machine MKW RAPID 30/UT16/GS/AW/HV + SFT 350 S

Emmelshausen

18,614 km

Collecting machine
MKWRAPID 30/UT16/GS/AW/HV + SFT 350 S

Call

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 16 stations + manual feeder High-stack feeder, 70 cm Lrsdezrxfgspfx Ab Aeu SFT 350 S (stitching/folding/cutting) S3 collating station with shaking function A4 landscape orientation Spare knife set Electronic double-sheet, misfeed and stitch wire detection 3 Hohner stitching heads, Universal 43/6 S Compressors Approx. 11.9 million stitches

See details

Listing

Vertical machining center Bridgeport GX 600

Karlsbad

18,646 km

Vertical machining center
BridgeportGX 600

Call

Condition: good (used), Year of construction: 2008, operating hours: 32,180 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, total height: 2,650 mm, total length: 2,350 mm, total width: 2,250 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10,080 h, number of slots in tool magazine: 20, Equipment: documentation/manual, Bridgeport GX600 Year of manufacture: 2008 Coolant collection tank HDH530 control system SK40 tool holders 20-position tool changer Coolant spray gun Lodpjz Eh Izsfx Ab Aeru The machine has been serviced annually. It was used to machine almost exclusively aluminum (99%). The spindle was completely overhauled one year ago. The M&h tool measurement sensor is also approximately one year old.

See details

Listing

Wood shredder, slow-speed grinder WEIMA WL10 überholt

Teisnach

18,354 km

Wood shredder, slow-speed grinder
WEIMAWL10 überholt

€21,000

ONO plus VAT

Call

Condition: reconditioned (used), Year of construction: 1993, operating hours: 4,110 h, functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,500 kg, Residual Wood Chipper / Wood Shredder / Slow-Speed Pusher Floor Grinder Refurbished WEIMA Model: WL10 Year of manufacture: 1993 Extraction diameter: 250 mm Motor power: 22 kW Rotor length: 98 cm Feed hopper approx. 120 x 100 cm Number of knives: 24 pcs. Knife dimensions: 30 x 30 mm Screen: 30 mm (includes second screen: 35 mm) Dimensions approx. 2.5 x 1.7 x 1.85 m Weight approx. 2,500 kg Lodpfx Aey Ahr Hob Aoru The machine has been refurbished: - Rotor shaft newly mounted - New paintwork - Pusher floor sliding rails replaced - Oil changed - Rotor shaft overhauled (partially new knives and holders, etc.) Condition as shown in images; please also refer to the item description. Collection by the buyer is possible. All dimensions are approximate. All information given to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected by the buyer or shipped at the buyer's expense. Shipping costs are provided as a guideline; final costs may vary depending on distance and unloading options. The stated sales price is the net final amount, plus VAT. An invoice with VAT shown will be issued. Warranty basis: Due to wear and tear of used parts, the items are generally sold as defective – for spare parts only and to business buyers. By submitting a bid, the buyer accepts this as the basis of the sales contract. For used items, warranty period is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, any warranty is excluded. For new items, warranty period is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

See details

Listing

Seeshaupt

18,526 km

Thickness planer
HofmannD 636

€18,000

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 7.5 kW (10.20 HP), planing width: 625 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (min.): 5,000 rpm, overall weight: 1,000 kg, 4-knife TERSA cutter head for planer Motor power 7.5 kW Positioning control for the thickness table Segmented infeed roller Segmented pressure bar Feed speeds of 7 + 14 m/min Table extension Planing width 625 mm, chip removal up to 8 mm, planing height 3.5-305 mm Thickness table mounted on four support spindles and with 4-point guidance. Heavily ribbed cast iron table, finely planed Modern control panel ergonomically positioned. Electric thickness table adjustment with LED display. Buttons for adjusting in rapid or slow mode, Adjustment accurate to 1/10 mm; integrated operating hour counter. Electronic starting and braking system. Electronic, wear-free brake for safe stopping of the cutter head. Infeed roller in rubber and two rubber outfeed rollers (high quality, low wear) Segmented pressure bar, rotary knob with scale, for adjusting the pressure (preload) of the outfeed pressure bar Two feed speeds 7 + 14 m/min; electrically switchable, also during planing Thickness hood with carpet support, can be used as a storage area for wood. Lrjdpfx Aboz Dkfte Aou Dust extraction port Ø 160 mm, to the left (can also be on the right – can be easily converted on site) Air velocity 22 m/s Integrated tool storage compartment for operating tools and planing knives Electrical equipment according to VDE/EN 60204 with main switch, emergency stop button and 2nd emergency stop button on the discharge side, winding protection, undervoltage protection, contact for controlling the dust extraction, accessories: 1 set of knives installed, operating tools, grease gun, operating manual Weight: approx. 1000 kg CE-compliant, BG-Holzstaubgeprüft No. HM 23001 Workplace-related emission values dB(A) according to DIN 45635 Part 1650 Idle noise approx. 69 dB(A), operating noise approx. 79 dB(A) Workplace-related dust emission value: 0.44 mg/m³

See details

Listing

Seevetal

18,241 km

Spindle moulder
FimalTX 160 "L"

€18,490

EXW Fixed price plus VAT

Call

Condition: new, Year of construction: 2025, machine/vehicle number: 6939, functionality: fully functional, Fimal Swivel Spindle Milling Machine TX 160 "Partnership Edition" Milling stop including parallel adjustment with handwheel and digital display, handwheel adjustment with digital display for the front stop jaw, electric travel swivel device for the complete stop, quick-release lever for fixing, aluminum stop jaws and pressure device, arc milling stop, electromotive spindle height adjustment, including digital display and decimal impulse setting, Table insert adjustable to the milling tool diameter (instead of table insert rings), Indicator lights for set milling speed, Electrical system and safety devices according to CE standard, Table dimensions: 2,500 x 780 mm, Milling spindle d= 30 mm, H= 140 mm, Milling speeds: 3000/4500/6000/8000/10000 rpm, Max. tool size under the table: Lrsdpfxjvlw Idj Ab Aeu d= 320 mm, H= 50 mm, Motor 7.5 kW / 10 HP, 400 Volt, 50 Hz, including automatic star-delta switch, Sound pressure level according to EN 27960: 83.9 – 87.3 dB(A), Spindle inclination: -45° to +45°, Electromotive spindle swivel adjustment including electronic display and decimal impulse setting, Partnership Edition complete with: "L" version with double-sided table extension and extendable workpiece support with emergency stop button, Upper control panel including electronic display, Swiveling mounting plate for feed device, mounted on the vertical column of the upper control panel, Socket for feed device, Right-left operation according to CE standard, Preparation for the installation of AIGNER integral stop jaws Ex works, from Seevetal location, without pre-carriage, freight and instruction, as inspected, subject to prior sale

See details

Advertise here

EdgebanderBrandt KDF 220 Highflex

Basic data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Edgebander
Brandt KDF 220 Highflex