Used Trimming for sale (2,045)

Condition: excellent (used), Finscan Nova and a CGV full trimmer Nwsdpfxewq A Edo Ad Sjh

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and cross-cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Boards are transported laterally using a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm inclined - Alignment roller section - Chain cross conveyor as a layer former - Star infeed and inspection unit before the trimmer - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (seated) at the joystick assesses: without re-trimming, 5000 mm into stacking machine 1, alternatively: without re-trimming, 4000 mm into stacking machine 1 Nedpfxey Uzlds Ad Sewh with re-trimming, 4000 mm into stacking machine 2 with re-trimming, 3000 mm into stacking machine 2 with re-trimming of short lengths for discharge into a box with re-trimming of short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut – cutting length 505 mm for the underlying vibration chute - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of finished packages and onward transport to the automatic strapping station - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 – ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee was able to produce, package, and strap approximately 15,000 boards of size 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping unit has already been dismantled. The system is therefore immediately available. It is very robustly built and has always operated smoothly and without any problems.

Condition: used, functionality: fully functional, This listing is for a second-hand Konica Minolta accessory: the ‘SDD Booklet Trimmer BLT0202’ Compatible with various Konica Minolta models Condition: This is a second-hand item, which may show signs of use (minor scratches or discolouration). Nwsdpfx Asy R Nppsd Ssh The device has been tested for functionality Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Nodpfxjw S Eyle Ad Sowh

Year of construction: 2024, condition: used, We offer a complete line of onion trimming machines, consisting of 4 two-row units, along with IMIZUNI OB-2R/4800 onion sorting tables, manufactured in 2024. These machines are regularly maintained and serviced and are compatible with onion peeling machines. The entire line is made of stainless steel. The output, with two operators sorting the onions, is 100-120 onions per minute, and with four operators, it is 120-180 onions per minute. Type: IMIZUNI OB-2R/4800 Serial number: 0025 Power consumption: 3.5 kW Power supply: 400 V Weight: 1150 kg Year of manufacture: 2024 Price for the entire line: 4 trimming machines and 4 sorting tables. If you have any questions or require additional information, please send a message via WhatsApp or contact us by phone. Nedoy T D Hbepfx Ad Sowh

Condition: used, functionality: fully functional, POLAR 137 EMC AUTOTRIM PAPER CUTTER Nedpfxsy Th Iie Ad Sewh also available with RAB 5 squaring device and L600 lifting table.

Condition: used, Year of construction: 2004, Format: 310 x 430 mm Nsdpfxjy Tacxe Ad Sowh Equipment: Counter 22 Mio Co-Pilot with Touchscreen Infeed conveyor from the right Automatic Magazine for In-line Production Counting Stacker Product Counter Tool Presetter Total number of knife sets: 1 Interchangeable Cutting Cassettes (Standard Set)

Condition: used, Year of construction: 2002, Trimmer Heidelberg TR 400 Year: 2002 - Sets of knives: Excluded Nwedpfxey I Rprs Ad Soh

Condition: used, Technical details: height over floor: 930 mm machine weight approx.: 75 +( 27kg Untergestell) kg dimensions L x W x H: 0,6 x 0,48 x 0,43 m EDGE CHAMFERING MILLING MACHINE Application: For chamfering Machine table: WxD: 600 x 240mm with limit stop bar LxH: 400 x 25mm built-in tool: cutter approx. 50mm with 45° milling form Chamfering width approx. 6mm voltage: 380 V with ON/OFF switch Nwsdpfeu Ngdtox Ad Seh *

Condition: ready for operation (used), * Brand: Triman * Surface: length 3000 mm, width 1800 mm - 4 decks * Driving: 4 pieces vibration motors of each 3,2 kW * Screen opening: [] 10-6-4-2 mm * Capacity: 0-2 mm 55 t/h * Incl.: steel construction and vibrating chute. Nwedpfx Adoywml Io Ssh

Condition: ready for operation (used), Year of construction: 2010, operating hours: 68,648 h, travel distance X-axis: 2,300 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,000 mm, table length: 1,800 mm, table width: 1,800 mm, spindle speed (max.): 10,000 rpm, overall weight: 36,000 kg, tool weight: 12,000 g, controller manufacturer: HEIDENHAIN, controller model: iTNC530, number of slots in tool magazine: 10, number of axes: 5, This Trimill VU 2313 Vertical Machining center was manufactured in the year 2010 in the Czech Republic and has 68648 hours, of which 40637 are spindle hours. It is equipped with a Heidenhain iTNC530 control unit and has 5 axis. The machine has a spindle speed of 10000 rpm, is in good condition, and is well maintained. Machine Benefits Qualitative Machine Benefits Nwjdpfxjywlv Es Ad Seh • Good condition! Technical Machine Benefits • Spindle motor power/torque 25 kw / 195 nm • B-axis (head) -2°/+92° • C-axis table n x 360° • Working feedrates x, y, z 30. 000 mm/min • Rapid feedrates x, y, z 3 m/sec² • Through spindle coolantMachine options: Connection station for high-frequency finishing spindle IMT ● HEIDENHAIN probe for workpiece positioning and measurement, infrared transmission ● BLUM probe - for tool measurement, laser - non-contact ● Tool cooling with liquid through the center of the spindle + external nozzles ● Lift Off - prevents the Z axis from sinking and damage to the part in the event of a power failure Technical Specification Taper Size HSK 100

Year of construction: 1985, condition: used, Maximum workpiece size: 400 x 300 mm Knife spindle speed, continuously adjustable: 1600 - 6000 rpm Nodjb Nxdvepfx Ad Sewh Electrical connection: Three-phase 380 V Space requirement: 900 x 800 x 600 mm

Year of construction: 2002, condition: good (used), Built in: 2002 Working hours: 10.688 thsd.h Nwodpfxsd R Sano Ad Soh Size: max 365 x 305 mm min 105 x 115 mm Product thickness: max 15 mm min 6 mm Speed: max 9.000 c/h min 2.000 c/h Equipment: gathering chain & feeder • 10 station gathering track & chain • 10 automatic feeders • 1 cover folder feeder 1528 stitching unit • wire unwind device • stitch control • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 1522 knives • 2 sets of knives

Year of construction: 1998, condition: good (used), Built in: 1998 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm Nsdpfjga Ditox Ad Sowh min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar) 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.)

Condition: good (used), Year of construction: 2003, functionality: unexamined, Built in 2003 Size trimmed max 300 x 420 x 80 mm Nwjdevtqbaepfx Ad Sjh min 100 x 100 x 2 mm Size max 305 x 430 mm Pile height 80mm Press capacity max 20 kN Speed max 3,900 c/h Air pressure 6 bar Compressed air 40 Nm³/h - 6 bar Electric supply 400/50 V/Hz/A Length 3,300 mm Width 3,060 mm Height 1,740 mm Weight 5,170 kg (approx.) Equipment • co-pilot • right hand infeed • feeders • control with touchscreen • equipment for changing the format

Year of construction: 1989, condition: ready for operation (used), Built in 1989 Size max 320 x 400 mm Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Product thickness max 80 mm min 6 mm Speed max 6.000 c/h Feeding height max 80 mm Equipment Nodpfsdubvqsx Ad Sswh • infeed from the right side • automatic infeed with integrated pre stacker • cut counter • Equipment for sheet-fed • 1 set of clamping plates and holders • 3 sets of cutting sticks • 2 set of knives • external knife changing device • central lubrication • belt delivery

Year of construction: 2009, condition: good (used), Rebuilt: 2009 Nwedsdyk Rrepfx Ad Sjh Built in: 1989 Size: 457 x 292 mm Speed: 6.000 c/h

Year of construction: 1995, condition: good (used), Built in 1995 Size: max 480 x 320 mm Size untrimmed with lap: max 480 x 320 mm Size untrimmed without lap: max 400 x 290 mm Size trimmed with lap: max 470 x 300 mm min 148 x 75 mm Speed: max 12.000 c/h Power requirements: 11-18 kW (220/380V, 50Hz) Equipment gathering chain & feeder: 6 station gathering track & chain 5 feeder 306 1 folder feeder 1528 Nwedegmr Nzopfx Ad Soh stitching unit: stitching unit 335 wire unwind device thickness control/ plus-minus 2 stitching heads HK 75 trimmer: trimmer 360 knives 2 sets of knives

Year of construction: 2007, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: · 1 Three knife trimmer 449 Knifes: · 2 Sets of knives Standards: · Standard accessories Condition: · working condition Availability: · immediately · Machine can be visited in production Optional equipment (not included!): · additional feeders · double production device · compensating stacker · card gluer · inserting machine Njdpsmn Sk Nsfx Ad Sowh · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Year of construction: 1997, condition: used, Size: max 460 x 310 x 60 mm; min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Speed: max 6.000 c/h Equipment gathering machine • 16 stations • gatherer ZU 801 controls • missing and double sheet control intermediate elements • spiral raceway • hand fed • jogging element • criss-cross delivery • -connected with perfect binder • 21 clamps • jogging station • milling and roughening station • hotmelt spine gluing unit • hotmelt side gluing unit • premelter • gauzing station • stream cover feeder • cover scoring 2 to 6 lines • cover pressing station • lay down device • shingle conveyor delivery conveyor system • conveyor system ca. 20m • connected with three knife trimmer • conveyor belt to trimmer Nedob Hppfopfx Ad Sowh optionales Equipment:--not included-- • - Opticontrol signature image reader

Condition: good (used), Year of construction: 2007, Format: max 340 x 260 mm; min 90 x 115 mm Format (without overfold): max 340 x 250 mm; min 90 x 115 mm Overfold: max 15 mm Final fold: min 6 mm Pre-fold: min 8 mm Stapling sheet formats: max 340 x 260 mm; min 210 x 155 mm Stitching thickness: max 6 mm Mechanical speed 1:1: max 25,000 t/h Mechanical speed 1:2: max 30,000 t/h Equipment Collecting chain & feeder - 8 stations Collecting chain - 8 Substructure simple - 6 Feeders 416 - Fabric gluer 423 Stapling station - Stitching station 430 - 15" inch chain pitch - Stitching wire unwinding device - Thickness control / Plus-Minus - 4 stitching heads Three-knife trimmer - Three-knife trimmer 426 Knife - 2 knives Nwjdpfx Adoqrqxke Sjh Delivery - Stacker Robusto Optional accessories: --- not included in the scope of delivery --- - Crane system - Bar feeder - Print roller feeder - Additional stations - card gluer - various transport lines - compensating stacker - automatic tying machines - Wrapping machines - palletizer

Year of construction: 2006, condition: good (used), Build in: 2002 - Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: 101 mm - max width product: 530 mm - min length product: 114 mm - max height / thickness / pagination product: 2-64p(96p) - product permitting - infeed stream lap: ~25-100 mm - min width product: ~3 mm - max width product: ~50 mm - min product width after trim: ~95 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: probably ~600 mm >>TBC - Trimming line - 1st trimmer knife left & right - Trimming line - 2nd trimmer knife right - To be used with carbide ring knives - Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137 - Over all length equipment: ~3500 mm - Over all width equipment: ~3000 mm - Over all height equipment: ~1181 mm ( infeed height~800 mm) - Input Power: ~13 kW Nedpfx Adoh Itu Es Sewh - Voltage: 400 V, 3 Ph, N, PE, 50 Hz - Air requirement: practically no air requirement - Suction capacity per nozzle: 900 m3/h, air speed 31m/s - Weight: ~800 kg - Color: RAL 7035, light grey - Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr), - Mechanical / electrical machine test possible - Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream. - Condition: cleaned & in working conditions - Machine available: upon request

Condition: good (used), Size: max 320 x 384 mm Size trimmed: max 304 x 310 mm, min 70 x 136 mm Speed: max 4.000 c/h, min 1.000 mm Power requirements: 7 kW (220/380V, 50Hz) Air requirement (6 bar): 40 m³/h Width: 3.612 mm Depth: 1.970 mm Height: 2.020 mm Weight: 3.500 kg (approx.) Nwedpfx Aolwvuxsd Sjh Equipment: • belt feeding • automatic infeed with integrated pre stacker • make-ready system • silicone spraying device • external knife changing device • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • central lubrication • belt delivery • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment

Condition: ready for operation (used), Size: max 480 x 325 mm Size untrimmed with lap: max 480 x 325 mm min 90 x 115 mm Nsdpfod N D Nwjx Ad Sswh Size untrimmed without lap: max 440 x 300 mm min 158 x 115 mm Size trimmed with lap: max 470 x 320 mm min 148 x 105 mm Size trimmed without lap: max 430 x 295 mm min 148 x 105 mm Speed: max 14.000 c/h Power requirements: 11-18 kW (220/380V, 50Hz) Equipment gathering chain & feeder: • 5 station gathering track & chain three knife trimmer: • three knife trimmer 251 • compensating stacker CS-20

Year of construction: 1998, condition: good (used), Built in 1998 Size max 305 x 420 mm Size trimmed: max 300 x 400 mm min 100 x 100 mm Book block thickness: max 80 mm min 2 mm Feeding height 80 mm Speed max 3.900 c/h Length 2.400 mm Width 3.060 mm Height 1.740 mm Weight 5.290 kg (approx.) Equipment • automatic infeed with integrated pre stacker • gripper loading • cut counter • automatical speed regulation • offcut blower • Equipment for sheet-fed • 1 set of clamping plates and holders Nwsdsfu H Sxopfx Ad Sjh • 1 set cutting table • 3 sets of cutting sticks • 2 set of knives • automatic lock of knife adjustment and pressing block • external knife changing device • copilot • automatic setting of • - infeed device • - bookblock pressure • - cutting table • - side knives • - side gauges • - height of the delivery clamp • central lubrication • delivery clamp