Used Trimming for sale (2,194)

Condition: good (used), Year of construction: 2002, Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Speed: max 6.000 c/h Hfsdpfjpgwausx Aa Eji Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.) Equipment copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Motorische Formateinstellung automatic setting from: - infeed device - book block pressure - cutting table - side knives - side gauges central lubrication standard accessories

Condition: good (used), Size: max 530 x 530 x 527 mm Hedped R Tgzjfx Aa Esfi min 135 x 135 x 170 mm Product thickness: max 15 mm Cutting width: max 0-60 mm Equipment: • infeed unit with degree bumbers • cutting unit • 1 st cut station RS 173/530 • 2 nd cut station RS 133/530 • bump turn 1530

Condition: good (used), Year of construction: 2012, Built in 2012 Size max 330 x 250 mm Size trimmed max 330 x 250 mm min 200 x 148 mm Size trimmed without lap max 340 x 260 mm booklet thickness 4-6 mm Mechanical Speed max 22.000 t/h Equipment crane system • 2 Bundle clamps gathering chain & feeders • 8 stations gathering chain • 6 feeders 0416.0440 • 6 streamfeeders 3738 with extensions • 1 Card gluer 423 • 1 Semko • 3 ELTEX static devices stitching unit 410.0425 • 2 stitching heads three knife trimmer • three knife trimmer 304 knives • 2 sets of knives controls • automatic selfajusting calipers ASAC • signature reading system ASIR • automatic make ready system Amrys Pick up station with chain and delivery station Inserter Hfsdpjtryhfjfx Aa Eoi • Müller Martini Integro • 4 stations • reject unit • transfer unit Addressing unit • Sitma 930-A Stacker • Müller Martini Robusto 451 Electrostatic Blocker • Müller Martini 457 Condition Very good working condition can been tested

Condition: good (used), Built in: 2000 Size: max 320 x 384 mm Size trimmed: max 304 x 310 mm, min 70 x 136 mm Speed: max 7.000 c/h, min 1.000 mm Power requirements: 7 kW (220/380V, 50Hz) Air requirement (6 bar): 40 m³/h Width: 3.612 mm Depth: 1.970 mm Height: 2.020 mm Weight: 3.500 kg (approx.) Equipment • belt feeding • automatic infeed with integrated pre stacker Hfsdpoxxi Npofx Aa Esi • make-ready system • silicone spraying device • external knife changing device Equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • central lubrication • belt delivery • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment

Condition: good (used), Year of construction: 2000, Maschinen Nr. 534 Built in 2000 Maximum Mechanical Speed: Up to 110 cycles/min Max. Individual Product Output: 13,000 products/hour Trimmed Format (Min. W x H x T): 100 x 120 x 2 mm Trimmed Format (Max. W x H x T): 300 x 388 x 80 mm Hfedpfx Aexyff Nja Eei Untrimmed Format (Max.): 310 x 400 x 80 mm Max. Pile Height (Infeed): 80 mm Max. Pressing Force: 20 KN (infinitely variable) Max. Front Trim Off-cut: 40 mm Max. Head/Foot Trim Off-cut: 50 mm Machine Length (Approx.): 2,410 mm Machine Width (Approx.): 2,260 mm Machine Height (Approx.): 1,740 mm Approximate Weight: 5,700 kg Control System: Kolbus Co-Pilot (Common) Air Consumption: 50 Nm^3/h or 30 m^3/h at 6 bar Exhaust Capacity (Trimmings): 4,000 m^3/h, 2,000 Pa Electrical Connection: 230/400 V, 3 phase, 50 Hz

Condition: ready for operation (used), Size max 315 x 410 mm Size trimmed max 300 x 380 mm Size trimmed 50 x 80 mm Speed max 1.080 c/h Feeding height 100 mm Table height 900 mm Clamping pressure min 500 daN Hfsdpfsyi Szwex Aa Eoi Clamping pressure 2.000 daN Power requirements 2,2 kW (220/380V, 50Hz) Width 1.370 mm Depth 2.100 mm Height 1.550 mm Weight 1.880 kg (approx.)

Condition: used, functionality: fully functional, measuring range X-axis: 2,200 mm, measuring range Y-axis: 12,000 mm, measuring range Z-axis: 700 mm, workpiece weight (max.): 5,000 kg, TRIMEK RECORRIDOS ÚTILES: EJE X : 2000 mm EJE Y : 1200 mm EJE Z : 700 mm Máximo error permisible ISO 10360-2/4 MPEe = 2.2+2,2L/1000 MPEp = 2.0 ME5007 Renishaw - PH10 Motorized Indexable Head Renishaw - TP20 Electronic Probe with SF modules (Standard Force) Opcional: Hfodpfx Aasym Uuno Eoi Licencia de Metrolog X4 PC STD KIT 24¨LCD Calibration sphere LICENCIA PolyWorks |Inspector™ Probing ++ Calibración ENAC Formación Instalación

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, cutting height (max.): 50 mm, product length (max.): 330 mm, product width (max.): 330 mm, production capacity: 1,000 unit/h, No reserve price – guaranteed sale to the highest bidder! Three-knife trimmer for high productivity: up to 1,000 cutting cycles per hour! TECHNICAL DETAILS Cutting thickness: 2 – 50 mm Number of knives: 3 Untrimmed format: Maximum: 330 x 330 mm; Minimum: 148 x 105 mm Trimmed format: Maximum: 300 x 300 mm; Minimum: 142 x 100 mm MACHINE DETAILS Hsdpfxoxlzuqo Aa Ejfi Dimensions (L x W x H): 2,260 x 1,160 x 1,600 mm Weight: approx. 1,530 kg FEATURES User-friendly LCD display Flexible processing of various product sizes Fast changeover times of less than 10 minutes Advanced locking system for operator safety

Condition: used, functionality: fully functional, In this offer you buy a used trimmer "Canon 2-Knife Trimmer A1" Object of sale: 1 x Canon 2-knife trimmer A1 suitable for various Canon models. Hjdpfx Aaowpd Tye Eofi Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, functionality: fully functional, In this offer you buy a used booklet trimmer ‘Canon booklet trimmer F1’ Object of sale: 1 x Canon booklet trimmer F1: Suitable for various Canon models We also have other finishing options and printing machines in stock. Please feel free to contact us! Hfsdpfxjv Dfv Hj Aa Eji Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, In this offer you buy a used booklet trimmer "Canon Booklet Trimmer F1" Object of sale: 1 x Canon Booklet Trimmer F1 suitable for the following models, among others: Canon imagePRESS C850/C750/C650 Canon imagePRESS C165 - series Canon imagePRESS C910 - series Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). Hfjdpet Hd D Rofx Aa Eoi (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: excellent (used), SDD Square Fold Module SFM 0704 + 2 Side Booklet Trimmer BLT 0202 Hjdpsfybf Aefx Aa Esfi Perfect condition , low meter ! As an experienced retailer of second hand copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request.

Condition: used, This listing is for a Leica Reichart Ultratrim Microtome Hjdpsxzg R Njfx Aa Ejfi

Condition: ready for operation (used), IN STOCK stack lift 650 kg Hodpfxsir A Iqo Aa Eefi

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, TECHNICAL DETAILS Maximum edge banding thickness: 12 mm Maximum panel thickness: 60 mm Maximum roller material thickness: 3 mm Minimum workpiece length: 140 mm Minimum workpiece width: 50 mm Feed rate: 12 - 18 m/min Feed rate: Infinitely adjustable Height adjustment: motorized Gluing system: Granulate Glue reservoir: Top Cross-cutting unit: 2 motors Edge copying unit: 2 motors Flush/radius/chamfer stations: 1 Design: Left-hand machine MACHINE DETAILS Control system: BIESSE SMART TOUCH 23" Total power consumption: 13 kW Dimensions & Weight Machine length: 5,610 mm Weight: approx. 2,250 kg EQUIPMENT Belt overpressure Quick-change glue reservoir Suitable for PUR adhesives Hfodpszktqujfx Aa Esi Strip magazine Spraying system Joint milling unit Preheating zone Pressure zone: NC-controlled Profile drawing blade, flat drawing blade Swivel unit Nesting equipment NC axis(es) Profile change: automatic Conformity marking: CE mark, EAC mark

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: KD 67 C, total width: 65 mm, total length: 160 mm, type of input current: three-phase, input voltage: 400 V, Brandt Optimat KD 67 C Automatic Edgebander Manufacturer: Brandt Maschinenbau GmbH, Germany Model: Optimat KD 67 C Year: 2000 Power Supply: 400V, 3 Phase, 50Hz Condition: Fully operational and currently in working order. Technical Specifications Hedozhd Ifopfx Aa Ejfi - Automatic single-sided edgebander - Edge thickness: 0.4–5 mm (up to 8 mm depending on material) - Panel thickness: 8–40 mm - Minimum panel width: 65 mm - Minimum panel length: 160 mm - Feed speed: 9–11 m/min - Machine length: Approx. 5.2 m - Weight: Approx. 1,950 kg - Total connected load: Approx. 6.2–7.0 kW Features - Coil edge magazine - Hot-melt glue application unit - Pressure roller section - Double motor end trimming - Top & bottom flush/radius trimming - Two-motor corner rounding unit - Profile scraper unit - Buffing unit - Fully enclosed safety guarding - German manufactured industrial machine Machine has been used in a professional cabinetmaking/joinery workshop and is in full working condition.

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - MAGELIS control system - For EVA-based hot-melt adhesive - Jointing: 2 x 1.5 kW, u=12000, 200 Hz - End trimming: 2 x 0.2 kW, automatic swiveling 0°/3°, 2 HM saw blades 140 mm - Flush trimming: 2.07 kW, with WPL heads HF 70, diameter 70 mm - Radius trimming: R2 - Radius scraper - Surface scraper - Glue pot above - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8-42 mm - Minimum length: 150 mm - Edge thickness: 0.2-6 mm - Feed rate: 12 m/min - Extraction port: 160 mm Hedpfxszk Nt Ej Aa Eefi Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: short notice Location: Baden-Württemberg

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. Hfodpfjx S Hmzjx Aa Esi - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: used, functionality: fully functional, mileage: 173,788 km, power: 368 kW (500.34 HP), first registration: 01/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with carbon filter, sun, mist, and air quality sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 99 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Side Skirts: YES Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour Tyres Information Front left - 11 mm Front right - 11 mm Hodpozl R Hpjfx Aa Esfi Rear left inner - 7 mm Rear left outer - 6 mm Rear right inner - 6 mm Rear right outer - 7 mm

Condition: used, mileage: 1,678 km, power: 125 kW (169.95 HP), first registration: 01/2025, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,050 mm, total width: 2,032 mm, total height: 1,983 mm, loading space length: 2,602 mm, Year of construction: 2024, Equipment: air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal Number: 0915. K001032 ----EQUIPMENT - 12-volt socket on D-pillar - 230V converter with socket (400W) - Airline tracks half-height on side walls - Adaptive Cruise Control ACC stop&go - Exterior mirrors, power-adjustable, heated - Flooring: Wooden floor in cargo area - Dynamic Light Assist (sunlight-regulated) - Auxiliary electric heater (for diesel) - Luggage net on rear wing doors - Heated rear window - Rear wiper with rear window washer system - HT LED matrix headlights - 2-zone cab air conditioning - Fuel tank: 70 l capacity - LED tail lights with exclusive light signature - Alloy wheels "Montreal" 6.5J x 16 - Multifunction artificial leather steering wheel - Mobile phone interface with e-function - Navigation system: 33cm (13") touch color display - Package: Exterior package - Package: Premium Plus Driver Assistance Package - Package: Light & Vision Package - Wheels/tyres: Goodyear all-season tires - Side panels made of plastic - Interior safety mirror, manually dimmable - Seat package 12A single seat in "checkered fabric" - Lane change assist "Side Assist" - High metal partition - Doors: Rear wing doors - 2x USB sockets – front center console - Electric sliding door close assist (right side) - 4-way driver and passenger seat, reinforced - ABS - Airbag for driver and passenger - Exterior mirrors electrically adjustable and heated - Mirror housings and door handles in black - Battery: AGM vehicle battery 80 Ah - Third brake light - Small roof console - Digital cockpit - Dual-tone horn - ESP - Rear parking assistance - High beam assist "Light Assist" - Laminated safety glass windscreen - Permissible total weight 2770 - 2845 kg - Alternator 230 A - Intelligent adaptive cruise control - 8-speed automatic transmission - Rubber floor in cab - Grab handles on roof frame - Glove compartment with cover - Tailgate - Heating and ventilation system in cab - Interior trim: Side panels from ... - Headrests (in cab) - LED twin lights in roof liner of load/cab area - LED daytime running lights headlights - LED cab lighting - LED taillights Hjdpfx Ajx U Ng Aea Eofi - Uni paint - Multi-function steering wheel - Narrow center console - Emergency brake assist with pedestrian and cyclist detection - eCall emergency system - Without tow bar - Package: Basic equipment package - Package: Exterior package - Package: Cab seating package 1 in "fabric" - Wheel arch cover - Radio: 33 cm (13") touch color display - Soot particle filter and AdBlue tank - Gear lever for automatic transmission - Sliding door on passenger side - Front mud flaps - Seats: Passenger seat - Lane keeping assistant "Lane Assist" - 2x USB data/charging sockets - Front and rear bumpers in black (textured) - High metal partition - Door: Opening configuration 1 - First aid kit, warning triangle & 2 safety vests - Traffic sign recognition and wrong-way warning - 6 lashing eyes for securing cargo - Prepared for VW Connect - Electronic immobilizer - Heat-insulating glazing - Central locking + keyless start, without safe lock - Registration: Complete vehicle registration ...etc. ----Vehicle is not detailed! Nationwide delivery available for an extra fee. Errors and prior sale excepted. We are happy to take your vehicle in part exchange. Financing / leasing possible without down payment! Do you have any questions? We are happy to advise you!

Condition: good (used), Code: 0380 Brand: CASADEI INDUSTRIA Model: V 20/10 - CE Standard Automatic edge bander for pre-glued edges on straight panels - CE Standard Technical data: Automatic feeder for panel advancement Automatic end trimmer for front and rear edge trimming Automatic trimmers - Speed rpm 9000 - cutters diameter mm 70 Z=4 Panel thickness min/max mm 10/50 Roll edge thickness mm 0,4-2,5 Edge height min/max mm 12/52 Feeding speed mt/min 5 Total power 4 Kw Hsdpfxey Ndyms Aa Ejfi N° 2 suction inlets diameter 60 mm Overall dimensions: mm 2100 x 700 x 1250 h Weight kg 350

Condition: good (used), Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Hsdpfx Aaowq Sc So Eofi Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280

Condition: good (used), Code: 0447 Brand: TB Model: 29 Hjdpfx Aajzl Aghs Esfi Jack planer for planing and trimming wooden edges Technical data: Rpm 14000 Power 1000 watts, single-phase 220 V Knives 60 mm Large work surface for comfortable and safe working Overall dimensions cm 25 x 35 x 15 h Weight kg 4

Condition: good (used), Year of construction: 2011, Single-sided edge banding machine in right-hand configuration with workpiece return, for hot melt or/and PU gluing, used, manufactured in 2011; approx. 8700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Width min.: 70 mm Height min.: 8 mm Height max.: 60 mm Length min.: 150 mm Feed speed: 14 – 20 m/min, stepless Glue application: Glue application roller with Vario-melt metering system Working height: 900 mm Machine dimensions: Machine height: 1,600 mm Machine width: 1,100 mm Machine length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: -Double roller pressure with electronic positioning -Pneumatic control of all units from the central touch screen control via Beckhoff industrial PC -CM – CombiMelt gluing system: Processing units: -Fk -JOINT PROCESSING UNIT for attaching chipboard with 2 HF motors, 2.2 kW, 200 Hz, 12000 rpm, operating in forward and reverse direction, length-controlled. Tool: DIA joint set Ø 85 x 45 x 30, z 3, for board thicknesses up to 42 mm Hodpfx Aaozb Iuqo Eefi -AKM – Edge magazine for the automatic feeding of strip edges, with spiked roller feed and pneumatic. pressure bar. Including optical edge monitoring -M4+1 – Four-fold magazine, automatic roller retraction. For holding four edge rolls. With variable edge shaft for interchangeable edge. With automatic selection menu. -K 13 – DOUBLE TRIMMING UNIT with 2 HF motors 0.6 kW, 200 Hz, 12000 rpm, motors and saw blades pneumatically adjustable 0/5° -K 160 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 -Bfc – FLUSH TRIMMING UNIT for pre-trimming the glued edges in the reverse direction. Sensing on one side, feed via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 HM – reversible cutting heads Ø 70 x 20 x 16 mm, z 4 (HF70). -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM reversible cutting heads Ø 70 x 20 x 16 mm, Z 4 (HF70), can also be fitted with radius tools -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM radius reversible knife heads (AR 73), Ø 73 x 16 x 16, z 3 for reversible inserts R 1 – R 3. -AKF – Automated COPY MILLING with two separate working spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12000 rpm Tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16. With integrated extraction. -AZK 4 – autom. operated SCRAPE BLADE CHANGING UNIT -ZKf – SURFACE SCRAPE BLADE UNIT with fine sensing device for removing residual hot melt adhesive in the joint area – with extraction. Additional equipment: -AS – Antistatic spray device, double, on glue joint -GS Lubricant spray device for spraying antistatic lubricant onto the edge surface, electronically controlled -RS – Cleaning set with 4-fold spray device and fine wiping device for cleaning the surface -KEO-c – EDGE CLEANING, oscillating and automatically adjustable. 2 motors 0.2 kW, with 2 cloth disks -WE – Angle insertion aid as a sliding carriage, foldable. For narrow parts. Interface for workpiece return Ligmatech ZHR 05 or comparable

Condition: good (used), Code: 0316 Brand: HIRZT - ITALY Model: MIREA - CE Standard Automatic edge bander with hot melt glue for panels, furniture, custom-made furnishings, wooden doors, kitchens, bathroom furniture and various - CE Standard Hodpfxsypm Tue Aa Eefi Technical data: Glue application on the panel Panel height 10/50 mm Max edge thickness 1 mm Minimum panel dimensions 70 x 140 mm Automatic feed with belt drive - Feed speed 4 mt/min Power consumption 4 Kw Copying trimming unit: cutters mm 70 x 14 x 12 Z4 15 degrees Knife end trimming unit Extendable front support - Inlet extension - Worktable height 900 mm Overall dimensions mm 1900 x 1100 x 1250 h Weight kg 300