Used Tos Sus 80 for sale (17,627)

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Gjdpfx Aecvkalsb Djit Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator The differential air pressure switch Controller minimum gas pressure Luc overall control.

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 with Heidenhain path control TNC 155 with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Spindle: SK40 Chip guard, attachable Documentation for the machine and control is available. Gijdpjxf Inksfx Ab Djt The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 02/2026, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro6, number of seats: 6, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 2,250 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * 6-seater double cab with partition wall * Hill start assist * Emission concept, EU6e (EA) * Pre-installation for tow bar; retrofitting included in price on request! * One front towing eye * Driver and passenger airbags, with passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and pivotable to the side * Exterior mirrors electrically adjustable, heated and foldable * Exterior mirrors left and right convex, with integrated LED indicators and wide-angle section * Front-wheel drive * Emergency brake assist * Battery 520 A (92 Ah) * Rubber floor in cab * Electronic parking brake * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Operating voltage 12 V * CO2-optimized version with stone chip protection * Electronic immobilizer * Front and rear parking aid * Entry handles on the rear pillars * USB type-C data and charging sockets with increased charging capacity * Daytime running lights with assistance light and coming/leaving home function * Electrical terminal strip and KFG preparation * Premium interior noise insulation * With UNECE CS&SU * 4th generation diesel engine 2.0L unit 03N.G * ACC Stop & Go * 8-speed automatic transmission * Glove box with lockable lid, illuminated * Entry handle on the partition wall in the cargo area * "Climatronic" air conditioning in the cab * LED main headlights with LED daytime running lights * LED interior lighting concept in passenger/cargo area * Rear view camera system with dynamic guideline * High beam assist "Light Assist" * Heated leather multifunction steering wheel with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Digital instrument cluster * Driver attention and fatigue warning system * MAN SmartLink * Base diesel engine 2.0 l/130 KW (4V) BIT, common rail * Current: TK1/TK4 * Fog lights including cornering light * Navigation system (Baseline) * MAN Connect (emergency services/InVehicle Apps/navigation device-dependent), with OCU high * Center wheel cover with chrome emblem Gjdpfxoyg Aafs Ab Djit * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, black * MAN Media Van Navigation Business * 12V socket and 2 cup holders in the dashboard * Region code "ECE" for radio * Tire pressure monitoring system * All-season tires * Standard wheelbase 3,640 mm * 3-point automatic seat belts with height adjustment and * Electric seat belt tensioners at the front * Rear wing doors with enlarged opening angle * Front, rear, and tailgate windows with heat-insulating glass * 12V sockets in cab * "ergoActive" suspension driver’s seat left * Double passenger bench seat on the right, with storage compartment and foldable middle backrest * Seat belt warning, electric contact in belt buckle, driver and passenger seat * Seat upholstery in fabric "Toronto Grid" * Driver’s and passenger’s seat heating, individually adjustable * Side marker lights * 3.5 t approval * Start-stop system with regenerative braking * Lane change assist * Crosswind assist * Headlight cleaning system, washer fluid level display, * Heated front washer nozzles * Intermittent wiper system with light and rain sensor * Keyless Go * Blind spot warning both sides and drive-off warning * Turn assist * Emergency assist (active lane keeping assist, emergency assist, and traffic jam assist) * Preparation for alcohol interlock * Intelligent speed assistant * With multifunction camera * T

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, spindle diameter: 130 mm, overall weight: 32,450 kg, year of last overhaul: 2014, The machine is in very good technical condition, equipped with a Heidenhain iTNC 530 CNC control system. Specifications: Spindle diameter: 130 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Taper in spindle: ISO 50 Spindle extension: 1120 mm Horizontal spindle head extension: 450 mm Gedpex Hfk Iofx Ab Deit Total installed motor power: 50 KVA Dimensions (L x W x H): 10100 x 4380 x 5250 mm Weight: 32,450 kg

Condition: new, Year of construction: 1990, functionality: fully functional, Clamping ring for vertical quill TOS/INTOS FNG, FNGJ, FNGP tool milling machines. Machining must be carried out to suit the specific machine. We are happy to take care of this for you, as well as any repairs of milling heads for machines from the TOS/INTOS Zebrak production. Giedpfjyghywex Ab Dst

Condition: excellent (used), Year of construction: 1982, Table size: 1250x1250 Spindle diameter: 100mm Gedpfoyghnhox Ab Dsit Cross: 1600mm

Condition: good (used), Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling Gjdpfxogxqt Aj Ab Doit -Stroke: 55 mm -Recess recording: mm -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg

Condition: used, Moving bezel, moving bezel, resting stick, lynette Godpjdcpiwefx Ab Dsit -Manufacturer: TOS for lathe type SUS80 -Max. Passage: Ø 200 mm -Plating: brass -Top height: 230 mm -Drawings for the photos -Quantity: 1 piece -Dimensions: 530/200/H740 mm -Weight: 100kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, circular grinding unit, milling machine table Gisdpfjdna Adex Ab Dst -Attachment for a: TOS universal grinding machine -Table surface: 490 x 190 mm -T slots: 2 -Clamping table: rotatable, swiveling, movable -Dimensions: 490/190/H290 mm -Weight: 31 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: TOS, three-jaw chuck chuck size Ø 125 mm -Passage: Ø 35 mm -Bolt circle: Ø 108 mm Godpfx Aewucf Sob Deit -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø125 x 70 mm -Weight: 4.1 kg

Condition: used, Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm Giodpfx Aob A Tdujb Det -Drawing with the photos -Number: 3x bezels available -Price: per piece -Dimensions: 370/280/H90 mm -Weight: 10 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Recording: MK2 -Drawing with the photos -Price: per piece -Number: 2 pieces -Dimensions: 200/75/H145 mm Gjdpfsb Hbx Njx Ab Dsit -Weight: 5 kg

Condition: used, Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm Giodpfob A Tdvox Ab Det -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Dimensions: 370/280/H90 mm -Weight: 10 kg

Condition: used, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder Gisdpfod Ar Uxex Ab Dot -Accessories for: tool grinding machine -Adjustment: SK50 -Tip height: 145 mm -Part head: swiveling, rotatable -Dimensions: 220/220/H285 mm -Weight: 17 kg

Condition: used, Bezel, stick, lynette Gsdpfsb A Tdbsx Ab Doit -Max. Passage: Ø 107 mm -Tip height: 180 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 370/340/H80 mm -Weight: 16 kg

Condition: used, Bezel, stick, lynette Gedpfx Abjb A Tdae Deit -max. passage: Ø 107 mm -Tip height: 180 mm -Edition: gray cast iron -Technical drawing in the photos -Dimensions: 370/340/H80 mm -Weight: 16 kg

Condition: good (used), Dividing head, dividing head, rotary table, rotating table -with translation: 1:40 -Indoor recording: MK4 -Peak height: mm -Passage: Ø 32 mm -Dividing head: swiveling -Dimensions: 430/430/H280 mm Giededc R N Tjpfx Ab Dst -Weight: 83 kg

Condition: used, Year of construction: 1987, Technical details: max. pitch circle diameter: 360/24 mm weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° Gijdpfxju Nlg Te Ab Dot rotation movement: 360 Grad dimensions: 350 x 450 x 260 mm Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm - chuck key - 2 pieces groove stone *

Condition: used, Technical details: clamping surface area: 630x400 mm no. of flutes: 8 rotatability of the table - manual/mechanic: 360 v. Hand ° weight of the machine approx.: 175 kg Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25mm; c=9mm Godpeu Nkrbjfx Ab Deit foot plate: size 380x300mm with 6 clamping slots WxL=14x20mm *

Condition: used, Technical details: swing diameter: 200 mm centre distance: 450 mm cross travel: 245 mm longitudinal feed: 830 mm table speed: 0,05-4,5 stufenlos m/min revolution per minute: Schleifspindel 1780, 2050 U/min revolution per minute: Werkstückspindel 50-500 U/min dimensions of grinding wheel: 350x32x127 mm Table dimensions: 2200x280 mm table swivelling to both sides: 9°vor+10°zurück Grad total power requirement: 6,0 kW Gedpfx Aou Ng Dgsb Djit weight of the machine ca.: 2,2 t dimensions of machine: 2,2x2,05x1,6 m Universal Center Grinding Machine without internal grinding device! - for precision grinding of outer, inner such as cone surfaces - feed of grinding headstock via hydr. or manual possible - table feed hydraulic stepless - grinding spindle swivelable with 60 degrees - workpiece headstock 90 degress swiveable with tapper MK4 - tailstock tapper MK 3 equipment: - dressing device/extruder - coolant tank incl. pump and supply i.D. *

Condition: used, Stainless steel welding line MOD.70/120, made OLIMPIA 80 Gisdpfsvtn H Tsx Ab Dst with tricathode welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 35 – 120 mm - Thickness : 0.7 – 3.5 mm - Length : 3 – 6 m Tube diameter: 35 – 120 mm Thickness: 0,7 – 3,5 mm Tube length: 3 – 6 m

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Gijdpfx Abjmk E D Ie Djt Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 350mm. Open design / possibility to insert wider workpieces Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Total weight approx. 3500kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: good (used), Copy head, copying head, copying device, copying lathe Godpfx Abedzymaj Deit -Heavy copy head for: lathe -without: hydraulic unit -Guide rails: 2 -and: accessories -Dimensions: 1100/170/H370 mm -Weight: 143 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, pressing force: 80 t, stroke length: 290 mm, operating speed: 90 mm/s, table height: 950 mm, throat depth: 1,000 mm, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, overall weight: 6,800 kg, controller manufacturer: Safan, controller model: TS1, working width: 2,550 mm, bending force (max.): 80 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, warranty duration: 3 months, control type: CNC control, actuation type: electric, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Godpout S E Nsfx Ab Djit Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: used, Year of construction: 1982, Technical details: table length: 2200 mm table width: 2500 mm table load: 16 t total power requirement: 6,5 kW feed speeds: 1,25 - 160 mm/min rapid traverse speed: 2000 mm/min Godpfx Ajvb A Uujb Deit longitudinal adjustment: 1500 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 4,1 x 2,65 x 0,95 m