Used Tos Sus 80 for sale (65,277)

Condition: used, Year of construction: 1988, centre height 350 mm weight of the machine ca. 50 KG tool adaptor MK5 Bedpfx Aenlbk Rocyedi

Condition: good (used), functionality: fully functional, Description: Clamping table area 1000 x 400 mm Spindle taper ISO 40 Main spindle speed 40-2000 rpm X axis travel 700 mm Y axis travel 400 mm Bdodpextqwdefx Acyoi Z axis travel 200 mm Machine weight 1750 kg Good condition – test run possible

Condition: excellent (used), Catalogue Number: 7641 ADVANTAGES – The best wide planer for wet and dry wood – Ideal for machining logs, floorboards, etc. – 3 planing shafts + 3 spindles – Manufactured by German brand KUPFERMUHLE – Used planer, in very good condition TECHNICAL DATA Max planing width: 800 mm Max planing height: 200 mm From above: - Feed-in roller, toothed, powered - Anti-kickback fingers - Pressure unit - 2 toothed feed rollers - Pressure unit - Planer shaft 800 mm, 4-knife, 7.5 kW - Pressure units - Profiling shaft 800 mm, 4-knife (equipped with 3 straight knives, 1 profile knife) - Pressure unit - Smooth outfeed roller From below: Bjdpfx Acjwfti Asyedi - Guide rail - Infeed table - Smooth feed roller - Planer shaft 800 mm, 4-knife, 7.5 kW - 2 smooth feed rollers - Split smooth sliding roller - Side pressure at outfeed From the rear: 2 side spindles + pressure units: 1) Right vertical 90 mm – 4 kW 2) Left vertical 90 mm – 4 kW - Spindle diameter: 35 mm - Alternately adjustable spindles - Spindles adjustable up/down, right/left 3) Additional horizontal bottom spindle 350 mm, adjustable up/down & right/left – 5.5 kW - Spindle diameter: 40 mm On outfeed: 4 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction port diameters: 3×180, 130 mm - Dimensions (LxWxH): 3100x2000x1900 mm - Weight: approx. 3500 kg Net price: 64,900 PLN Net price: 15,450 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1982, TOS BHU40/1000 Bedextg Daepfx Acysdi

Condition: not inspected (used), We offer a lot of lathe accessories. Bdsdextdwdepfx Acyei - Various three-jaw and four-jaw chucks - 2x faceplates 400mm, 1x faceplate 500mm - Used condition - Some without jaws, some with jaws

Condition: used, Year of construction: 1997, feed length X-axis: 900 mm, feed length Y-axis: 450 mm, feed length Z-axis: 400 mm, X/Y/Z travels: 900/450/400 mm Table area: 1120x400 mm Max. table load: 600 kg Spindle taper: ISO 50 Bjdpfx Aextaxdecyodi Total power input: 20 kVA Machine overall dimensions (LxWxH): 2560 x 3280 x 3355 mm Machine total weight: 4550 kg Control system: Heidenhain TNC 415 Machine incl. the following accessories: 4th axis, vice, toolholder, collets, probe, manuals

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 280 mm, turning diameter: 280 mm, feed length X-axis: 750 mm, overall weight: 1,150 kg, We specialize in the repair of machine tools and currently offer a refurbished, very popular and high-quality TOS Žebrák S 28 lathe (year of manufacture: 1956) for sale. - The machine is in perfect condition following a complete overhaul - Accuracy equivalent to a new machine Accessories: - new chuck (diameter 160 mm) - digital readout (Jirka a spol.) Bdsdsu Ur Dyspfx Acyoi - change gears - collet chuck + collets - fixed stop with fine adjustment - adjustable stops - fixed steady rest - LED light Price is excl. VAT.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The machine is in good technical condition; inspection under power is possible by arrangement. CNC control: Heidenhain 426. X axis (longitudinal): 1250 mm Y axis (transverse): 900 mm Z axis (vertical): 940 mm Table length: 1000 mm Table width: 1120 mm Max. workpiece weight: 3000 kg Spindle diameter: 100 mm Spindle speed min./max.: 50/2000 General overhaul in 2020. Bedpfx Acoxtd Naoyodi

Condition: excellent (used), CATALOG NUMBER 7653 Technical specification: - Track width: 240mm - Shaft width: 260mm - Max. disc diameter: 300mm - Disc bore diameter: 70mm - Max. cutting height with disc 350 / 400: 100mm - Table width with clearance: 750mm - Table length: 1530mm Bdjdowmq Swepfx Acyji - Top section: - Pawls/kickers - Driven toothed shaft - Pawls/kickers - Saw shaft - Slip/pressure roller - Bottom section: - Guide - Pawls/kickers - Track - Feed motor: 2.4kW - Main motor: 22kW - Extraction outlet diameter: 2x160mm - Overall dimensions (LxWxH): 2000x1530x1720mm - Weight approx. 2080kg Net price: 23,900 PLN Net price: 5,690 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater currency fluctuations)

Condition: ready for operation (used), travel distance Z-axis: 508 mm, feed length X-axis: 1,016 mm, feed length Y-axis: 610 mm, controller manufacturer: Heidenhain TNC 410, total height: 2,600 mm, total length: 2,260 mm, total width: 3,280 mm, empty load weight: 6,000 kg, rotational speed of tool magazine (max.): 8,000 rpm, Tos -Mas MC100V X:1016 - Y:610 - Z: 508mm Table dimensions: 1080 x 580 mm Admission in spindle (ISO): ISO 40 Power on the spindle: 16 kW Bedpfjxp Slnsx Acyjdi Toolchanger: yes Number of toolholders: 40x

Condition: used, Year of construction: 1987, Technical details: Bedpeu Nkm Eefx Acyedi table diameter: 500 mm table height: 70 mm rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm *

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1000 mm centre height 200 mm centre distance 1000 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 1,8 t dimensions of the machine ca. 2,85 x 1,4 x 1,9 m voltage 400 V With chuck, Multifix toolholder and digital readout. Bdjdpfx Ajxp Rzbscyji

Condition: used, total height: 2,200 mm, total width: 1,900 mm, total length: 2,400 mm, Empty weight: 2.800 kg Milling machine miller, mill Model: Conventional Bdedpfxswnhtbe Acyei Manufacturer: TOS Type: FGH 32 Year of manufacturing: 1988 Digital readout: Mitutoyo Travel: 900x350x400mm Spindle-speed: 32-1400 rpm Table: 1250x360mm Spindle-take: SK40 Spindle-motor-power: 7,5kW Machine-dimensions: 2400x1900x2200mm Machine-weight: 2800kg - Documentation available: No - Drive system: Conventional - Power [kW]: 7.5 - X-axis travel [mm]: 900 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 400 - Table length [mm]: 1250 - Table width [mm]: 360 - Tool holder: SK40 - Min. spindle speed [rpm]: 32 - Max. spindle speed [rpm]: 1400 - Options: Digital readout - └ Type of digital readout: Mitutoyo - Transport dimensions: 2400mm x 1900mm x 2200mm (l x w x h) - Transport weight [kg]: 2800kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, workpiece weight (max.): 300 kg, grinding length: 1,500 mm, grinding diameter: 400 mm, TOS BHU 40/1500 Cylindrical Grinding machine, grinding diameter 400 mm, grinding length 1500 mm, very good technical and visual condition. Technical specifications: Grinding diameter: 400 mm Grinding length: 1500 mm Maximum workpiece weight: 300 kg Grinding wheel size: 600 × 150 mm Longitudinal table travel (X-axis): 1–1790 mm Rotating grinding head: ±45° Rotating table: ±5° Spindle taper: Morse 5 Maximum spindle speed: 1240 rpm Total connected power: 22 kVA Bdodpfx Acsxphdmoysi Machine weight: approx. 6 t

Condition: excellent (used), CATALOG NUMBER 6913 TECHNICAL DATA - Track width: 360mm - Shaft width: 350mm - Max. saw blade diameter: 350mm - Saw blade bore diameter: 80mm - Max. cutting height: 120mm From above: - Pawls - Toothed feed roller - Pawls - Smooth slip roller Bdodskytcxepfx Acyei - Roller with saw blades - Pressure slip roller From below: - 2 slip rollers before the worktable - Guide - Pawls - Track - Central automatic lubrication for track - Electric lifting of the saw blade shaft - Electric lifting of the main body - Infinitely variable feed speed adjustment - Feed motor approx. 2.5kW - Main motor 30kW - Overall dimensions (L/W/H): 2500x2300x1900mm - Weight approx. 4000kg ADVANTAGES – Czech production – 2 slip rollers in the worktable – Used multi-rip saw – Very good condition Net price: 34,900 PLN Net price: 8,300 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1987, Technical details: Bdodpeu Nlg Tefx Acyei max. pitch circle diameter: 360/24 mm weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° rotation movement: 360 Grad dimensions: 350 x 450 x 260 mm Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm - chuck key - 2 pieces groove stone *

Condition: used, Year of construction: 1987, total height: 2,500 mm, total width: 2,000 mm, total length: 2,200 mm, Empty weight: 4.500 kg Price: On request - Year: 1987 - Documentation available: No - Serial number: 23300448 - Drive system: Conventional - Power [kW]: 11.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 450 - Z-axis travel [mm]: 400 - Table length [mm]: 1450 - Table width [mm]: 400 - Tool holder: ISO50 - Min. spindle speed [rpm]: 8 - Max. spindle speed [rpm]: 2000 - Options: Digital readout - └ Type of digital readout: Mitutoyo - Transport dimensions: 2200mm x 2000mm x 2500mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 2 Financial information Bsdpfx Aow Duc Uocyedi VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2010, CATALOGUE NUMBER: 6591 TECHNICAL DATA - Maximum cutting height: 250 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Minimum blade diameter: 300 mm - Maximum blade diameter: 400 mm - Maximum infeed material width: 860 mm - Minimum workpiece length: 1,500 mm * From above: - Kickback devices - 2 pneumatically pressed, metal, toothed feed rollers - Kickback devices - Pneumatically pressed, metal, toothed feed roller - Pressure unit - Saw shaft - Pressure unit - 2 pneumatically pressed, metal, toothed feed rollers * From below: - Metal idler roller - Guide - Kickback devices - Track - Saw shaft - Track - Stepless feed speed adjustment via inverter: 4–40 m/min - Main motors: 2 × 75 kW - Feed motor: approx. 3 kW - Electric body lift (up/down): 0.55 kW - Electric adjustment of saw shafts: 2 × 0.18 kW - Centralized lubrication - Extraction connector diameter: 2 × 300 mm - Dimensions (L × W × H): 3,400 × 2,650 × 2,200 mm - Weight: approx. 7,500 kg ADVANTAGES – Czech manufacture – Double-shaft – DTR technical documentation – Used multi-blade saw, very good condition Bdsdpfx Acslrvgieysi Net price: 275,900 PLN Net price: 65,690 EUR Net price based on exchange rate 4.2 PLN/EUR (price subject to change in case of significant exchange rate fluctuations)

Condition: used, Technical details: swing diameter: 200 mm centre distance: 450 mm cross travel: 245 mm longitudinal feed: 830 mm table speed: 0,05-4,5 stufenlos m/min revolution per minute: Schleifspindel 1780, 2050 U/min revolution per minute: Werkstückspindel 50-500 U/min dimensions of grinding wheel: 350x32x127 mm Table dimensions: 2200x280 mm table swivelling to both sides: 9°vor+10°zurück Grad total power requirement: 6,0 kW weight of the machine ca.: 2,2 t dimensions of machine: 2,2x2,05x1,6 m Bdsdpfx Aeu Ng Dgscyei Universal Center Grinding Machine without internal grinding device! - for precision grinding of outer, inner such as cone surfaces - feed of grinding headstock via hydr. or manual possible - table feed hydraulic stepless - grinding spindle swivelable with 60 degrees - workpiece headstock 90 degress swiveable with tapper MK4 - tailstock tapper MK 3 equipment: - dressing device/extruder - coolant tank incl. pump and supply i.D. *

Condition: used, Year of construction: 1960, total height: 2,700 mm, total width: 2,650 mm, total length: 2,450 mm, Empty weight: 5.500 kg - Year: 1960 - Documentation available: No - Serial number: 33460 - Drive system: Conventional - Power [kW]: 15.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1400 - Y-axis travel [mm]: 440 - Z-axis travel [mm]: 450 - Table length [mm]: 2000 - Table width [mm]: 450 - Tool holder: ISO50 - Min. spindle speed [rpm]: 18 - Max. spindle speed [rpm]: 1400 - Options: Digital readout - └ Type of digital readout: Sony Magnescale EA-210 - Transport dimensions: 2450mm x 2650mm x 2700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Bedpfownid Usx Acyodi VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential - 2 rows of pressure rollers - Pull-in feed roller, sequential - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller Bdedepmtckspfx Acyoi - Outfeed pressure roller Bottom section: - Adjustable infeed table + pressure roller - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture – Used planer, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: used, Technical details: clamping surface area: 630x400 mm no. of flutes: 8 rotatability of the table - manual/mechanic: 360 v. Hand ° weight of the machine approx.: 175 kg Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25mm; c=9mm foot plate: size 380x300mm with 6 clamping slots WxL=14x20mm Bjdpeu Nkrbsfx Acyedi *

Condition: used, Year of construction: 1984, total height: 2,350 mm, total width: 1,850 mm, total length: 1,600 mm, Empty weight: 2.500 kg - Year: 1984 - Documentation available: No - Drive system: Conventional - Power [kW]: 2.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 840 - Y-axis travel [mm]: 360 - Z-axis travel [mm]: 440 - Table length [mm]: 290 - Table width [mm]: 1250 - Tool holder: SK40 - Min. spindle speed [rpm]: 56 - Max. spindle speed [rpm]: 4500 - Options: Digital readout - └ Type of digital readout: MKS Bdedpjwnhkyofx Acyoi - Transport dimensions: 1600mm x 1850mm x 2350mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), CATALOG NUMBER: 7663 TECHNICAL DATA - Maximum planing width: 510 mm - Maximum planing height: 200 mm – Top section: - Anti-kickback fingers - Feed roller, toothed - Hold-downs, 2 rows - Infeed roller, toothed - Hold-down - Planing shaft, 510 mm, 4-knife, 7.5 kW motor - Hold-downs - Discharge feed roller, smooth - 2 outfeed pressure rollers - Smooth feed roller – Bottom section: - Hold-down - Adjustable infeed table with slip roller - Planing shaft, 510 mm, 4-knife, 5.5 kW motor - 2 smooth slip rollers - Side pressure roller – Rear section: - Side spindles: 1) Vertical right: 140 mm, 4 kW 2) Vertical left: 140 mm, 4 kW - Spindle diameter: 40 mm - Fitted cutterheads: 4-knife, height 120 mm - Spindles adjustable up/down, left/right - Stepless feed speed adjustment - Electric table elevation - Extraction port diameters: 3x150 mm, 1x110 mm - Dimensions (L/W/H): 2300x1700x1700 mm - Weight: 2,200 kg ADVANTAGES – Ideal for flooring processing Bdedpowqchfefx Acyji – Electric table elevation – Manufactured in Czech Republic – Used planer in very good condition Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: used, total height: 1,700 mm, total length: 6,000 mm, total width: 1,700 mm, Empty weight: 6.500 kg Price: On request Lathe metal lathe Model: Conventional Manufacturer: TOS Type: SUI 63 Serial number: 407620860 Center distance: 4000mm Center height: 325mm Turning diameter: 630mm Spindle passage: 80mm Spindle speed: 11,2-1800 rpm Machine-afmeting: 6000x1700x1700mm Machine weight: 6500kg - Documentation available: No - Drive system: Conventional - Centre height [mm]: 325 - Swing over bed [mm]: 630 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 11.2 Bdedpfx Acownhy Ioyji - Max. spindle speed [rpm]: 1800 - Transport dimensions: 6000mm x 1700mm x 1700mm (l x w x h) - Transport weight [kg]: 6500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum