Used Torna 765 for sale (213)

Condition: used, Year of construction: 2000, operating hours: 17,200 h, functionality: fully functional, machine/vehicle number: T 90077, turning length: 450 mm, turning diameter: 230 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 4,000 rpm, overall weight: 2,800 kg, - Year of manufacture: 2000 - Single owner, used in-house - Fully functional, under power, ready for demonstration - Operating hours: 17,200 h - X-axis travel: 200 mm Ncodpsxgtrkefx Ahvop - Z-axis travel: 450 mm - Turning diameter: 230 mm - Turning length: 450 mm - Spindle speed: 4,000 rpm - Spindle bore: 52 mm - Spindle motor power: 11 kW - Control: Fanuc 21 i - Tailstock - 12-station VDI 30 turret - Chip conveyor - Weight: 2,800 kg Net price ex-works, unloaded, from location Luckenwalde (Germany), excluding transport

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, The device is complete and operational – it was previously used in conjunction with a Pitney Bowes XPV inserter. The issue that needs repair concerns only the reading function. Nedpfx Ajyq Rm Ujhvscp

Condition: good (used), Year of construction: 2015, operating hours: 3,572 h, load capacity: 2,000 kg, fuel type: electric, empty load weight: 1,200 kg, mileage: 3,572 km, This electric ride-on pallet truck by ATLET is from 2015. The pallet truck has a capacity of 2,000 kg and is equipped with long forks of 1,600 mm. It features a 2015 battery WITHOUT CHARGER and has 3,572 operating hours on the clock. Schedule a test drive or order the pallet truck in our webshop! Ncjdpfx Ahsvcfacevjp

Condition: used, Year of construction: 2005, Overview  This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  Capacity: Up to 60,000 bottles per hour Formats: Supports 11 bottle formats From 0,3l - 0,66l Steini, NRW, Longneck Container types: Glass, not transparent, non-contoured Container diameter: 60.4 – 69.1 mm Container height: 174 – 270 mm Label positions: Front (up to 2 labels) Back (up to 1 label) Label size range: Width: 70 – 111 mm Height: 33 – 100 mm Band height: 1100 mm Max. ambient temperature: 40°C Power connection: 400 V Machine design: Straight version, size L (approx. 3360 mm wide) Bottle carousel diameter: 1610 mm Number of bottle plates: 42 Bottle rotation in carousel: Mechanical Guide star diameter: 690 mm Labelling stations: 2 x Cold glue labelling stations 8 glue pallets 9 gripper positions Automatic magazine feeding Scope of Delivery  1 x Labelling Machine | HEUFT | TORNADO | 2005 Including: 2 x Integrated Laser Coders | Bluhm Complete labelling setup with format parts for 11 bottle formats Cold glue stations, glue pallets, gripper arms, and automatic magazine Technical documentation Nsdpfjwd Uk Sox Ahvocp

Condition: used, Year of construction: 2011, Overview This cold glue labeller was manufactured in 2014 by the German company HEUFT. It was used for the labelling and inspection of glass bottles including control of label presence, underfill detection by X-ray, and bottle breakage detection with automatic rejection. The machine includes special equipment for bottles with neck foil. It comes with 6 format parts. The Domino laser, vacuum unit and glue pumps are not included in the scope of delivery. It is available immediately and can be viewed by appointment. Technical data  Type: Cold glue labeller with 2 labelling stations (8 glue pallets, 6 gripper positions, machine pitch 120 mm) Capacity: up to 36,000 bottles per hour (max. output without orientation, as per documentation) Container type: glass, transparent Container diameter: 59-67.5 mm Container height: 226-260 mm Closure material: metallic, closure diameter: 28 mm Belt height: 1000 mm Electrical connection: 400 V, 50 Hz Max. Ambient temperature: 40 °C Device diameter container carousel: 1150 mm Control functions (Spectrum TX): Label control (sensors), underfill control (X-Ray), bottle breakage control, rejection Special feature: Processing of NRW bottles with neck film Scope of Delivery  HEUFT Tornado W incl. 2 cold glue stations Spectrum TX control system 6 format parts Without domino laser, vacuum cleaner and glue pumps   Ncsdpfx Ahswz Evyevsp

Condition: good (used), Three-phase motor, electric motor Nedodi Ukwopfx Ahvecp -Power: 0.25 kW -Speed: 2765 rpm -Shaft: Ø 11 mm -Design: B3 -Protection class: IP 54 -Dimensions: 210/124/H170 mm -Weight: 5 kg

Condition: excellent (used), Year of construction: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" working width 1300 mm Drilling, grooving, milling Base machine complete in standard version according to price list 01/19/D: For detailed technical data, please refer to the datasheet for PROTEC Type 0571 - Machining unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A)) - Pressure device from above for working width 1300 mm - 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm - 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Nsdew Sguwepfx Ahvscp Location: ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), machine/vehicle number: 80290, Extraction capacity: 5500 m³ / h Negative pressure: 765 - 351 Pa Suction opening: 180 x 220 mm Ncodpfeft Siuox Ahvop Outlet opening: 300 mm Ø Speed: 1400 rpm Drive motor: 380 V, 5.3 kW Weight: 60 kg Required space: 720 x 680 x 350 mm

Condition: ready for operation (used), Year of construction: 1998, table mounting size: 765 x 400 mm movements x/y/z: 650/410/510 mm spindle taper: BT 40 min./max. distance table/spindle: ca. 90/690 mm spindle turning speed range: 80 - 8000 rpm number of tool positions: 20 pieces carriages: ca. 30 m/min rapid move: ca. 30 m/min electrical connection: 380 V, ca. 15 kVA kW Nodpfxstwy Dis Ahvscp space needed: 2300 x 2100 x 2650 mm weight: 4000 kg

Condition: new, Year of construction: 2024, Laser engraving machine for home use and hobby. This table-top equipment can also cut wood, paper, cardboard, acrylic, and fabric. A Wattsan СO2 laser engraver is primarily intended for cutting small workpieces. Compact, trustworthy, and precise — exactly what you need. Wattsan 6040 engraver operates plywood, wood, plastics, rubber, leather, fabric, and much more. It can cut materials up to 7-8 mm. It’s often used for souvenirs production, stamps, little decorations, etc. You can give our managers a call for additional details! Wattsan 6040 characteristics Working area: 600x400 mm Laser power: 90-100 W Working table lowering depth: 200 mm Positioning precision: 0,03 mm Machine size: 765 x 1165 x 600 mm Packing size: 860 x 1250 x 790 mm Weight: 121 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine. Ncodpfx Ahjh Uc Erevop

Condition: new, Year of construction: 2024, Laser engraving machine for home and hobby. This table-top equipment can also cut wood, paper, cardboard, acrylic, and fabric. A Wattsan СО2 laser engraver is first and foremost designed for carving tiny workpieces. Compact, dependable, and precise — just what you need. Wattsan 0503 micro engraver operates plywood, wood, plastics, rubber, leather, fabric, and much more. It can cut materials up to 5-6 mm. It is commonly used in the creation of souvenirs, stamps, and other decorations. You can give our managers a call for additional details! Wattsan 0503 characteristics Working area: 500x300 mm Laser power: 60 W Working table lowering depth: 200 mm Positioning precision: 0,03 mm Machine size: 650 x 1040 x 575 mm Packing size: 765 x 1140 x 710 mm Weight: 104 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK Ncsdpeh D Rvpsfx Ahvep On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 2018, operating hours: 10,104 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 36 m/min, Equipment: chip conveyor, DOOSAN VC 630 5AX (5-AXIS machining center) Model: VC 630 5AX HEIDENHAIN TNC640 NC Year of manufacture: 2018 Condition: Used, very good, still in production Operating hours: 26,290 h Spindle hours: 10,104 h X-axis: 650 mm Y-axis: 765 mm Z-axis: 520 mm Ncjdpfx Ajyxb S Sshvjp A-axis: +30° to -120° C-axis: 360° Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 36 m/min Maximum table load: 500 kg Spindle: 16000rpm 30/24kW Tool holder: HSK 63A Through-spindle coolant: 18 bar Height: 3295 mm Width: 3200 mm Length: 4585 mm Weight: 13500kg

Condition: used, mileage: 388,583 km, power: 130 kW (176.75 HP), first registration: 08/2018, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,350 mm, loading space width: 2,050 mm, loading space height: 2,350 mm, Equipment: air conditioning, central locking, had accident, tail-lift, Tel.: call (Contact · Phone · Mobile · WhatsApp) * Man TGE 3.180 4x2 * Box body with tail lift * Manual transmission * Air conditioning * VIN: WMA08VUZ7J9007302 * kW: 130 * Displacement: 1968 ccm * Curb weight: 2660 kg * Gross weight: 3500 kg * Payload: 765 kg Nsdjvp Ul Iepfx Ahvocp * Fifth-wheel load: 120 kg * Box internal length: 4.35 m * Box internal width: 2.05 m * Box internal height: 2.35 m * Tires: 205 / 75 R 16 C * According to workshop, engine turns over but has no compression, thus does not currently start * Net price * All information without guarantee

Condition: good (used), Year of construction: 2008, Table size, pallet size: 500 x 500 mm Pallet quantity: 2 Maximum workpiece size: 730 x 500 mm Maximum table load: 500 kg Travel paths: X-axis: 630 mm Y-axis: 765 mm Z-axis: 510 mm C-axis: 360° (turntable) A-axis: +30°/-120° (swivel table) Speed range: 12 000 rpm Tool holder: SK 40 Tool positions: 80 Internal tool cooling: 20 bar Main drive power: 26 KW Ncjdsr Drcmopfx Ahvop Machine weight: 17 000 kg Space requirement (LxWxH): 5 500 x 4 000 x 3 400 mm Control system: Mazatrol Matrix Accessories: Chip conveyor, complete documentation for the machine.

Condition: used, mileage: 398,000 km, power: 375 kW (509.86 HP), axle configuration: 6x2, color: green, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2021, Equipment: ABS, EBS, air conditioning, - Brake system For inquiries about the vehicle, Mr. Seidel is at your service (by phone). Mercedes-Benz Arocs 2551 L 6x2/4-4 Timber Truck Crane: Cranab TZ12.2, high seat, A1D front axle 8.0 t, A1H Hydraulic Auxiliary Drive (HAD), A1Y front axle, straight version, A2G rear axle, crown wheel 300, planetary, 13.4 t, A4T trailing axle, 8 t, steered, relieved, liftable, A5P axle ratio i = 3.714, B1B Electronic braking system with ABS and ASR, B1D Electronic air supply unit, medium, B1F Heating, electronic air supply unit, B2A disc brakes, on front and rear axles, B3H secondary water retarder, B4A condensate monitoring for air system, B4M air tank, steel, B5A trailer brake, 2-line, brake connectors left, C2R wheelbase 4800 mm, C4L frame overhang 2550 mm, C6J power steering pump, non-regulated, C6Q stabilizer front axle, C6U additional stabilizer rear/trailing axle, C7A rear underride guard (ECE), C7F front underride protection (ECE), aluminum, C8F mudguards for chassis transfer, C8I spray protection (EC), front, CLW power steering oil cooling, D0S compressed air connection in cab, D1C driver's air-suspended comfort seat, D1N co-driver functional seat, D2N seatback release driver's seat, D2W armrests both sides, co-driver seat, D3B comfort bed lower, D3Q seat cover velour driver's seat, D3T seat cover velour co-driver/center seat, D4T curtain across bed(s), D4Y side sunblind driver side, D5Y rubber mats driver and co-driver side, D5Z carpet on engine tunnel, D6F air conditioning, D6I residual heat utilization, D6M hot water auxiliary heater in cab, D7G stowage compartment cover driver and co-driver side, D7J drawers under bed, D7K drawer under ledge, D7R storage flaps above windscreen, D8N electric sunroof, D9A preparation for upper comfort bed, wide, E0D battery sensor (Hella), E1C batteries 2 x 12 V/220 Ah, low maintenance, E1N alternator 28 V/100 A, E3B 12 V/15 A supply point for additional consumers, E3L 24 V/15 A socket passenger side footwell, E3Q additional socket 24 V/15 A passenger side footwell, E4W starting aid, speed limit 30 km/h, E5H night driving light switch, E6A trailer socket 24 V, 15-pin, E7F remote cable control for air suspension, E9G prep. for electrical devices, F0Y mirror trim construction vehicle, F1I L-cab StreamSpace, 2.50 m, level floor, F2P cab 765 mm mounting height, F3B cab suspension comfort, steel-sprung, F3W cab tilting device, mechanical-hydraulic, F4X exterior stowage compartment flap left, F5L exterior sun visor, transparent, F6C tinted windscreen, F6I heated front mirror, F6Q air horn, F7B bumper corners steel, F7D bumper center section towing eyes, coupling jaw, F7T door extension, F7Y cab access left/right movable, F8E locking system with central locking, G0A drivetrain 44 t to 68 t, G0W off-road driving program, G2F transmission G 330-12/11.63-0.77, G5A single-disc clutch, G5G Mercedes PowerShift 3, I6X air suspension rear axle, J1E instrument cluster 12.7 cm with additional displays, J2H multimedia radio touch, J2K 2-way speaker system, J3Z axle load measuring device, JBFE parking brake on front axle activation via additional switch, K0T main tank left, K1M tank 510 l left alu, K3V AdBlue tank 60 l left, L1N fog lamps, LED daytime running light, cornering light, L1Q construction taillights, in metal housing with grille, L9C preparation headlamps... Nedpfoyw E D Asx Ahvocp

Condition: new, new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 3,7 / 4,5 kW inspection gantry Nedpjyu I N Ijfx Ahvscp safety lid CE-approved overall dimensions (l x w x h) : ± 1.970 x 1.000 x 1.750 mm (open lid: H: 2.250 mm) infeed height : ± 1.450 mm Suitable for loader with “Easy Connect” dimensions drum : (l x w x h) : ± 1.000 x 765 x 665 mm + Loader for eurobins

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 515 mm, turning diameter: 520 mm, spindle bore: 66 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 565 mm, overall weight: 4,400 kg, One-Touch IGF (soru-cevap diyalog programlama özelliği var) 2024 model OKUMA LB3000EXII CNC TORNA KONTROL OSP-P300LA KATALOGUNU EKLEDİK İNCELİYEBİLİRSİNİZ. 2 EKSEN ÇEVİRME ÇAPI 520 MM İŞLEME ÇAPI 410mm İŞLEME BOYU 515 mm FENERMİLİ DELİK ÇAPI 66 mm PUNTA KONİGİ MT-5 PROGRAMLI PUNTA VAR 5000 DEVİR AGIRLIGI 4400 KĞ Nedpfx Ahjywhfiovecp Almanya ve Fransa' da referans verebiliriz.

Condition: used, Year of construction: 2011, Lippert roller cam right or left 90°-570-500 IR765 RA1820 Make: Lippert Running direction: 90° right running/ left running Roller width (RB): 500 mm conical, plastic coating Nominal/outer width (NB): 570 mm Inner radius (IR): 765 mm Side guides included on both sides Scope of delivery: without supports (please enquire if required) Nedpfsk Abfmsx Ahvocp Optional For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, controller manufacturer: Fanuc, controller model: 32i-B5, _____ Nodpfx Aeyul E Tshvocp Description: Year of manuf. : 2015 Control : Fanuc 32i-B5 Turning diam. : 552 mm Turning length : 765 mm Mainspindle: Technology:Motorspindle Speed:3.000 rpm Power (max.):38 kW Torque (max.):1.014 Nm Bar capacity:100 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axfix BI-SP08F100 Subspindle: Technology:Motorspindle Speed:4.500 rpm Power (max.):40 kW Torque (max.):286 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axfix 65 Movement in B:895 mm Rapid travers in B:30 m/min Toolcarrier (X/Y/Z): Technology:Turret with 16 stations Taper:BMT65 Tooldive:10.000 rpm, 17,5 kW, 56 Nm Movement in X/Y/Z:305/140/860 mm Rapid travers in X/Y/Z:18/18/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with Filter and Highpressure, 20bar Toolmeasurement:Automatic Measuringarm, Marposs TT30 Rawmaterialfeed:Barloader, Breuning-Irco MUK 10016 II Finsihedpartremoval:Part catcher with conveyor belt Oilmistseparation:Interface mechanical prepared Toolholder:Misc. used static and driven toolholder Further Equipment:Rinsing pistol

Condition: used, Year of construction: 2015, controller manufacturer: Fanuc, controller model: 32i-B5, _____ Description: Year of manuf. : 2015 Control : Fanuc 32i-B5 Turning diam. : 552 mm Turning length : 765 mm Mainspindle: Technology:Motorspindle Speed:4.500 rpm Power (max.):40 kW Torque (max.):286 Nm Bar capacity:70 mm Workpiececlamping:3-Jaw chuck, SMW Autoblok 250BB Njdpfx Ahoyul Eaovscp Subspindle: Technology:Motorspindle Speed:4.500 rpm Power (max.):40 kW Torque (max.):286 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok FK-N 165-46 Movement in B:895 mm Rapid travers in B:30 m/min Toolcarrier (X/Y/Z): Technology:Turret with 16 stations Taper:BMT65 Tooldive:10.000 rpm, 17,5 kW, 56 Nm Movement in X/Y/Z:305/140/860 mm Rapid travers in X/Y/Z:18/18/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with Filter and Highpressure, 20bar Toolmeasurement:Automatic Measuringarm, Renishaw RP3 Automation:Gantryloadersystem, Frai Oilmistseparation:Interface mechanical prepared Toolholder:Misc. used static and driven toolholder Further Equipment:Rinsing pistol

Condition: ready for operation (used), Year of construction: 2017, Panasonic MDF-C2156VAN Ultra-Low Temperature Freezer External dimensions (W x D x H): 1730 x 765 x 1010 mm Internal dimensions (W x D x H): 760 x 495 x 615 mm Volume: 231 liters Net weight (approx.): 318 kg Cooling performance: -150°C Temperature setting range: -125 to -152°C Temperature control range: -130 to -150°C You are welcome to arrange an inspection. We can also organize affordable shipping for you! The purchase price includes VAT. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Njdpfxjyvud Ae Ahvjcp Visit our shop and view our other offers. The stated company names and trademarks are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2009, machine/vehicle number: 307.05.09, total height: 2,100 mm, total width: 1,750 mm, total length: 9,000 mm, Supply voltage: 400 V Main data: Max. Material width: 1000mm Min. Material width: 500mm Max weight paper/cardboard mother roll: 1000kg Outside paper/cardboard mother roll diameter: 1200mm Inside paper/cardboard mother roll diameter: 70/100mm Cardboard sleeves outside diameter: 35-50mm Cardboard sleeves length: 500 and 700mm Packaging foil type: Polyolefine Foil strength: 13-25 um Product diameter / length: 400-765 mm Total Dimensions (LxWxH): 9000x1750x2100mm Line layout: 1. Roll wrapper RW 800 sn: 307.05.09 2. Roll packer RP 800S 3. Shrink tunnel SST 800 4. Label machine ETMO 120 1. Roll wrapper Brand: Möller Type: RW 800 Year of construction: 2009 Serial number: 307.05.09 Supply voltage: 400v 3ph N SL 50hz Operating pressure: 6 bar 2. Roll packer Brand Möller Type: RP 800S Year of construction: 2009 Serial number: 260.05.09 Supply voltage: 400v 3ph N SL 50hz Operating pressure: 6 bar 3. Shrink tunnel Brand: Möller Type: SST 800 Year of construction: 2009 Serial number: 240.05.09 Supply voltage: 400v 3ph N SL 50hz Operating pressure: 6 bar 4. Label machine Brand: ETMO Type: 120 For spare parts please look at lot 143,145,235,236 Online auction of high-end rotogravure printing presses and packaging machines (e.g. 2015 BOBST ROTOMEC 7-color rotogravure printing line, SCHIAVI 7-color / 6-color printing press (2x), MÖLLER roll winding and packaging lines, HOBEMA, WOHLENBERG, MAVECO flower cover machine, 2018 CONTIMETA foil shrink tunnels etc.), large stock of gravure cylinders and paper stock (ca. 225T ready product gift wrap paper rolls), compressors, rolling stock and all other plant inventory originating from the bankruptcy of Kaleidoscope Nederland B.V. in Almelo, The Netherlands. The online auction opens Tuesday 3 March and closes Tuesday 31 March. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 27 March Nsdeyvr Ulopfx Ahvscp Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 1986, functionality: fully functional, total height: 1,800 mm, total length: 2,500 mm, total width: 1,000 mm, overall weight: 1,000 kg, spindle speed (min.): 1,400 rpm, spindle speed (max.): 7,000 rpm, number of spindles: 1, type of input current: three-phase, TECHNICAL DATA & EQUIPMENT: Serial Number: 765 Operating Voltage: 380 V Frequency: 50 Hz Rated Current: 14 A Voltage Range: Geb Azzknsw D T T Sodoka (context unclear; possibly placeholder or specific manufacturer code) Centre Height Universal Dividing Head: 170 mm Centre Height Tailstock: 120 mm Centre Height Tailstock with Intermediate Bearing: 170 mm Max. Workpiece Diameter Between Centers: 338 mm Max. Workpiece Diameter in Cantilever Mounting: 600 mm Max. Distance Between Centers: 950 mm Internal Taper Dividing Head Spindle: Morse Taper 4 (MT 4) T-slot Size Machine Base: 12 mm T-slot Size Other Parts: 8 mm Movement Range: Grinding Stroke Travel: 190 mm Cross Movement Tool Holder: 100 mm Height Adjustment Grinding Head: 325 mm Grinding Spindle Infeed: 5 mm Coarse Adjustment Travel Tool Holder: 230 mm Grinding Head Slide: 800 mm Universal Dividing Head on Tool Slide: 330 mm Swivel Range Grinding Head Slide: 360° Grinding Head: 360°, Tool Holder: 360° Universal Dividing Head Horizontal and Vertical: 360° Maximum Grinding Length for Helical Grinding: 190 mm Max. Rotation of Dividing Head Spindle for Helical Grinding: 1.5 revolutions Max. Grinding Wheel Diameter: 125 mm Max. Cut-Off Wheel Diameter: 200 mm Spindle Speed: 1,400 – 7,000 rpm The machine is equipped with a two-axis optical measuring system, dressing device, table extension with tailstock, and matching accessories. Contents include tool holders, clamping equipment, a helical grinding device, radius grinding device, a tool post, and various accessories. NOTES ON COLLECTION: Loaded onto truck, forklift available. Ncjdpsw Nn Akofx Ahvjp Available immediately.

Condition: excellent (used), Year of construction: 2013, KNUTH HFS 3063 VC - Hydraulic Surface Grinder Year: 2013 working area travel X-axis 765 mm travel Y-axis 340 mm workpiece weight (max.) 270 kg spindle axis-to-table surface distance 565 mm table dimensions 300x630 mm scale ring division Y-axis 0,02 mm scale ring division Z-axis 0,005 mm autom. transverse feed 0,1 - 8 mm autom. vertical feed 0,005 - 0,05 mm feed hydr. feed X 7 - 23 m/min rapid feed Y-axis 990 mm/min rapid feed Z-axis 460 mm/min drive capacity motor rating grinding spindle 5,5 kW motor rating servo drive 0,5 kW measures and weights grinding wheels dimensions 350x40x127 mm overall dimensions 2800x2200x1890 mm weight 2700 kg Features: - automatic transverse and longitudinal feed - rapid feed for setup to desired work height - adjustable roughing, finishing and spark-out strokes - hydraulic longitudinal table movement on Y-axis - double table V-guide in transverse table, V-guide and flat guides in longitudinal table - table guideways are hardened, ground and PTFE (polytetrafuorethylene) counter-laminated - ensuring maximum wear resistance - external hydraulic unit ensures high temperature stability - automatic central lubrication system Accessories/options: 2-axis digital readout system grinding wheel halogen lights Ncsdpfx Aeyuvahshvop operator manual coolant tank with dust extraction system Under power in our warehouse!

Year of construction: 2011, condition: ready for operation (used), overall weight: 4,700 kg, total height: 1,950 mm, This Milacron ELEKTRON 75 was manufactured in 2011. It features a screw diameter of 18 to 32 mm and a clamp force of 750 kN. The machine dimensions are 4.36 × 1.42 × 1.95 m, and it weighs 4700 kg. If you are looking to get high-quality injection moulding capabilities, consider the Milacron ELEKTRON 75 machine we have for sale. Contact us for more information about this machine. Additional information • Clamp Force: 750 kN • Injection Unit: 300 • Screw Diameter (mm): A 18 / B 25 / C 32 • Injection Pressure (bar): A 2500 / B 1943 / C 1488 • Shot Volume (cm³): A 103 / B 140 / C 183 • Shot Weight (PS g): A 113 / B 154 / C 201 • Injection Rate (cm³/s): A 117 / B 159 / C 208 • Screw Stroke (mm): 165 • Screw L/D Ratio: 25 • Plasticizing Capacity (g/s): A 9.2 / B 11.2 / C 11.2 • Screw Speed (rpm): 125 • Tie Bar Distance: 575 × 570 mm • Platen Size: 750 × 765 mm • Min Mould Height: 250 mm • Max Mould Height: 480 mm • Opening Stroke: 320 mm • Max Daylight: 800 mm • Ejector Stroke: 150 mm • Ejector Force (kN): 25 • Mould Platen Hole Spacing: 405 × 380 mm • Mould Weight Max (kg): 400 • Number of Core Pullers: 4 + 1 • Nozzle Radius: R = 300 mm • Nozzle Orifice: Ø 48 mm • Hydraulic Oil Capacity: 97 / 130 L • Thread Size for Mounting: M10 Dimensions Machine Depth 4360 mm Ncjdpex D N D Djfx Ahvep