Face Grinding Machine

DISKUS DDS 600 RAM

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m Dcsdpfx Abjuy Ifgs Tsr The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Various options possible (KM system, infeed/outfeed, workpiece rulers etc.)

Year of construction: 1992, condition: used, grinding height 50 mm grinding width 120 mm grinding wheel diameter 600 mm total power requirement 85 kW weight of the machine ca. 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _____ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grinding spindle drive, each infinitely variable 37 kW Total electrical load, approx. 85 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * SIEMENS CNC Control, Model SINUMERIK 810 G, with monitor, for 4 axes i.e. * Movement of 2 spindle quills, dressing device, WP Rotation. Direct programming of Grinding Process data on keyboard. In connection with a IONIC Size Control No. 17 A / 68.000 with two tracers for measuring the thickness of the workpieces after grinding process, and corresponding infeed of the grinding wheels. Continuous display of measuring results on the monitor, with statistics, workpiece counter, etc. Digital Display Ampere for both grinding wheel drives and for grinding spindle speeds, etc. . * Positioning control device for supervising the height of the lower grinding wheel.. * Double column design as a portal for extra stability and higher accuracy * Rotary workpiece transportation device with infinitely variable feeds. The workpieces are Manually stacked in a device and forwarded by a transportation carrier disk thru the grinding wheels, there are two WP- down holders, one equipped with a overheight stop-control. * Angled grinding wheel dressing device, with automatic dressing process, integrated in the control as CNC axis, with safety switch-off. * Separate large switch cabinet. * Automatic central lubrication. Large pneumatic control system * Large Coolant device 6 (F) with filtering unit and magnetic separator. * Various Grinding wheels, WP transport carrier disks, 2 flanges, large Olimist separator, etc. This machine is very suitable for simultaneous double-sided grinding of large series of workpieces, e.g. punched parts, piston rings, hydraulic parts, rotors, distance rings, etc. Djdpet Hw Nasfx Ab Tocr Condition : Very good. Machine can be soon inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm Dcedpst Hw N Hsfx Ab Ter workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), centerless grinding machine Dodpfx Aetrguvsb Tscr

Condition: used, Manufacturer: CINCINNATI Dcjdpfx Ajwrpykeb Tor

Condition: good (used), GENERAL CHARACTERISTICS Max. Ø to be ground 120 mm Grinding wheel width 250 mm Minimum Ø to be ground 1 mm Ø drive grinding wheel 304 mm Ø working wheel 508 mm DIMENSIONS AND WEIGHT Height 1,700 mm Dcedpfx Absrpnf Ae Tor Width 1,500 mm Length 2,750 mm Weight 4,000kg ELECTRICAL CHARACTERISTICS Grinding head motor power 15 Kw Spindle head motor power 1,8kw Hydraulic motor power 1,1kw Total power 20 kW Voltage 220/380 V

Condition: used, Year of construction: 1978, grinding diameter max. 100 mm regulating wheel width 200 mm max. width of grinding wheel 200 mm grinding diameter 100 mm grinding length 250 mm feed in mm working area mm speed m/min Bar length mm total power requirement 25 kW weight of the machine ca. 4.500 t dimensions of the machine ca. m K O E N I G & B A U E R (Germany) Centreless Grinder with Plunge-in Grinding Device Model Multimat 150 - 5 Year approx. 1978 S/Nr. 73 918 _____ Grinding Ø regular/maximal 2 – 50/100 mm Max. length of workpiece for Thru-Feed-grinding 250 mm Max. length of workpiece for plunge-cut grinding 200 mm Grinding wheel size, Ø x width 600 x 200 mm Regulating wheel size, Ø x width 300 x 200 mm Grinding wheel speed, max. 1.450 rpm/35 m/sec. Regulating wheel speeds (stepless) 10 – 140/230 rpm Regulating wheel tilt plus/minus +3 / –5 ° Stroke of Dressing Device 200 mm Grinding wheel drive, approx. 18,5 kW Total electrical load approx.. 25 kW - 380 V - 50 Hz Weight approx.. 4.500 kg Accessories/Special Features: * Machine is suitable for a Plunge-In Grinding Process with a manual workpiece Injection device and a pneumatic driven workpiece lift-off device after grinding Process. The final removal of the finished parts is by hand. * Actually mounted a workpiece rest for medium sized workpieces, (maybe 50 mm) * The Regulating wheel slide/workpiece rest carriage can be inclinate by 3 to 5 degrees to compensate cylindrical errors. * The infeed adjustment of workpiece saddle is controlled by a hydraulic plunge-in device with a cam device for quick-feed forward and backwards, also there is a fine infeed actuated by a step motor controlled by MARPOSS – Unit. * The grinding spindle unit is fixed and accommodates a complex hydraulic dressing device with template and the slide can be swivelled for profiling plane shoulders, stepmotor for the infeed of diamond tool compensation, also there is mounted a hi pressure coolant nozzle to cool down the diamond tool and to rinse the grinding wheel. * Hydraulic driven Copy Dressing device mounted above the regulating wheel. * The regulating wheel speed is steplessly adjustable, higher speed during dressing poc. * The control panel contains all machine functions like Numbers of dressing cycles, number Dcjdpfjt Hwtrex Ab Tjr of workpieces, adjustable spark-out time, speed range, manual or automatic process, etc. * some sep. Flanges and grinding and regulating wheels, tool for changing the flanges,separate Hydraulic and sep. Switch cabinet, central lubrication, MARPOSS Unit, * ! Actually there is no Coolant device available ! Condition : Good to very good. Machine can be inspected under power. Ideal for small batch production. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 30013012, 27.10 25: Machine currently in serial production. Shutdown planned for mid-2026. Please state your offer price. Dcedpfx Aoth Sc Hjb Ter Sale only within Europe, including Turkey. ----- For technical data, see handout. Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please indicate this in your bid. We do not assume any liability for the accuracy of the technical data, the completeness of accessories and tool equipment, nor for compliance with all safety and environmental protection requirements as specified in accident prevention regulations.

Condition: excellent (used), Year of construction: 2012, DISKUS DDS 750 XR – Technical Specifications Dcsdpfx Aewwrqcob Tsr Machine type: vertical double-disc grinding machine Model: DDS 750 XR Grinding wheel diameter: 750 mm Maximum grinding width (through-feed): 180 mm Maximum material thickness (through-feed): 30 mm Maximum grinding width (plunge-cut): 300 mm Maximum material thickness (plunge-cut): 80 mm Grinding spindle 1 power: 48 kW Grinding spindle 2 power: 48 kW Grinding wheel surface speed (max): 63 m/s Coolant delivery: through the spindle center Feeder type: rotary feeder Feeder speed range: 20 mm/min to 240 mm/min Control system: Siemens 840 D CNC Total machine height: approx. 3,100 mm Overall weight: approx. 13,000 kg Footprint requirements: length approx. 4,900 mm, width approx. 5,000 mm Construction features: triangular rigid frame, linear-guide spindles, 16 CNC axes, central lubrication, coolant filtration

Year of construction: 2013, condition: used, Technical details: swing diameter: 80 mm Dsdpfeixl Ahsx Ab Tscr workpiece length: 450 mm weight of the machine ca.: 3500 kg