Used Tool Post Grinder for sale (42,551)

Condition: excellent (used), Year of construction: 1992, Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 >> serial no. 1651 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool carrier 360 degrees grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speed, stepless 2000 to 10000 rpm Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Weight 520 Kg Isdpfsm E T Anox Adnea Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Condition: excellent (used), Year of construction: 2007, 5 controlled axes: X, Y, Z, A, and B Fully automatic grinding wheel changer NUM Axium Power 1050 control system with PC TOOL DATA Max. diameter: Ø 250 mm Max. diameter for complete machining: Ø 250 mm Max. length for complete machining (from front edge of workpiece support): 430 mm Max. tool length between centers: 480 mm Isdpfjxt N Izex Adnja Center height: 195 mm X-axis grinding travel: 625 mm Z-axis cross slide travel: 305 mm Y-axis vertical slide travel: 305 mm All linear axes are driven by high-precision ball screw spindles with 2 preloaded nuts. The axes are guided on extremely robust recirculating roller shoes on hardened rails. GRINDING HEAD, B AXIS Swiveling range in the horizontal plane: 240° Rotational speed: 120°/s Liquid-cooled motor spindle: 150 x 150 mm Grinding wheel mount with automatic quick-clamping system HSK - C/E 50 Spindle speed infinitely variable: 2,000 - 10,000 rpm Max. grinding wheel diameter: 150 mm Grinding wheel changer with 4 magazine slots Second probe arranged on the workpiece holder for automatic grinding wheel measurement, including software CHAIN LOADING MAGAZINE with PICK-UP arm Capacity: 160 tools Maximum workpiece diameter: 32 mm Maximum workpiece length: 200 mm Maximum tool weight: 2.5 kg CNC-controlled steady rest TURBO separator (filter system)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Fully functional machine designed for precise regrinding of cutting tool heads made of carbide and high-speed steel (HSS). Equipped with CNC control on two axes, with the remaining axes operated manually. The stable construction and robust Ø50 mm spindle ensure reliable performance in production environments and tool rooms. Ijdpfewzw U Uex Adnsa

Condition: excellent (used), Year of construction: 1988, TECHNICAL DATA. Max. clamping length: 90 mm Tool clamping height with tapered shank: 50 mm Tool clamping height with straight shank: 45 mm Max. helix angle: 45° Number of clamping positions: 1 to 99 Max. slide travel: 550 mm Max. grinding wheel diameter: 350 mm Min. grinding wheel diameter: 150 mm Grinding wheel speed (variable): up to 2700 rpm Swivel range of grinding spindle axis: 0° to 15° Grinding slide feed rate (variable): 0.05 to 16 mm/min (with 3rd and 4th axis: 0.05 to 8 mm/min) Workpiece spindle taper: ISO Taper No. 40 Ijdewwkacspfx Adnea Grinding Wheel Data CBN and diamond cup grinding wheel: Ø200 mm → Min. DFF: 66 (3rd axis), 76 (4th axis) Ø250 mm → Min. DFF: 16 (3rd axis), 26 (4th axis) CBN-ES cone grinding wheel: Ø200 mm → Min. DFF: 50 (3rd axis), 60 (4th axis) Ø250 mm → Min. DFF: 0 (3rd axis), 10 (4th axis)

Condition: used, Year of construction: 1975, 1640 weight 280 kg ja +++++ Please note: Iodpfxjh H Eqnj Adnoa The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2007, 6-axis tool grinding machine, Numroto control Isdsxq Sgzepfx Adnoa

Condition: excellent (used), Year of construction: 1995, Tool grinding machine Michael Deckel S5 in very good condition Technical data: >> year of construction 03/1995 >> grinding wheel diameter max.100mm >> spindle speed 5600 1/min >> power consumption 1,5KW >> weight 450KG Accessories: >> Swiveling dividing head SK40 >> div. mountings SK40 To the machine : Ijdpfx Aspr U Etodnsa Offered is a tool grinding machine of the brand Michael Deckel S5. The machine is suitable for grinding high precision parts. The Deckel S5 is in a very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try this machine on site under power.

Condition: good (used), Year of construction: 2005, operating hours: 114,129 h, functionality: fully functional, machine/vehicle number: 2820, Control: Siemens Sinumerik Software: Haas Software 7.3 Number of axes: 6 (X, X3, Y, Z, C, A) Grinding spindle: - Infinitely variable up to 8,000 rpm - Haas short taper - Grinding wheel diameter max. Ø200 mm Workpiece spindle: - Up to 1,000 rpm - Center height 175 mm - Collet 3409 - SK50 tool taper - Through hole Ø28.5 mm - Workpiece weight up to 2.5 kg - Indexing accuracy +/- 3.5 angular seconds - Input increment 0.001° Workpiece support: Linear axis X3 with bushing holder Feed drives: - Linear axes with ball screw spindles - Direct position measurement with resolution 0.0001 mm Workpiece dimensions (drills): - Ø 0.8 - 15.0 mm - Overall length 20 - 380 mm - Grinding length 10 - 360 mm - Workpiece weight max. 2.5 kg Isdpewpqkrefx Adnoa Chain magazine: - 42 stations - Ø 0.8 - 15.0 mm - Length 80 - 250 mm - Workpiece weight max. 1.5 kg Stack magazine: - Suitable for stack magazine for indexable inserts CCD area camera measuring system: - Tool indexing and positioning by cooling channel (from Ø 0.8 mm) - Measurement of opening angle - Indexing of multi-flute drilling and reaming tools Renishaw probe: - Touching off workpiece length / tool tip - Scanning flute lead angle - Positioning in a coolant hole at the tool tip Electrical connection: - 63A pre-fuse - Supply voltage 400 V - Frequency 50 Hz - Control voltage 24 V - Rated power 21 kW Weight: 8 t Incl.: - Control cabinet cooling: water-water heat exchanger - Fire protection system: Kraft and Bauer extinguishing system - Extraction: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Workpiece retainer ----- Operating procedure for drills: - Manual loading of the chain magazine outside the machine enclosure - Workpiece feeding by automatic handling system - Workpiece clamping by automatic collet chuck - Positioning of workpieces in the working area - Workpiece machining - Automatic return of the workpieces on a driven discharge conveyor Operating procedure for solid carbide indexable inserts: - Manual loading of the stack magazine in the working area - Workpiece feeding by automatic handling system - Automatic clamping using special clamping device - Positioning of workpieces in the working area - Workpiece machining - Automatic return of finished workpieces to the storage system Drill grinding: - Grinding flute profile - Grinding point - Grinding outer contour - Grinding relief - Grinding circumferential margin - Cylindrical grinding Indexable insert grinding: - Grinding seating surface and pin ----- There are two additional identical machines for sale!

Condition: used, Technical details: grinding length: 450 mm centre height over plate: 120 mm grinding width: 200 mm grinding spindle - swivable: 350 ° grinding head adjustable: 15° re/li ° grinding head adjustable: vertical: 250 mm adjustment of spindle-head: quer/transversal 230 mm spindle revolutions per minute : 2200/3500/5200 U/min work table:: B x L: 120 x 950 mm table movement: quer: 220 mm table movement: längs/longitudinal=500mm mm table adjustment: 5° / 45° rechts / links ° dimensions of grinding wheel: Ø 120x15 mm dimensions of hydaulic: 0,6x0,5x0,9 mm total power requirement: 1,8 kW weight of the machine ca.: 1,2 t dimension machine xH: 1,6 x 1,2 x 1,6 m dimensions of hydaulic: 600 x 550 x 820 mm The tool grinding machine is currently re-equipped as a surface grinding machine. with Orsta hydraulic power unit with dust extraction and various accessories i.D. Ijdpfx Asu Ng Ifednja *

Condition: used, Year of construction: 1979, functionality: fully functional, total height: 1,900 mm, total length: 1,400 mm, total width: 900 mm, workpiece weight (max.): 600 kg, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8,000 rpm, table length: 500 mm, table width: 200 mm, power: 2 kW (2.72 HP), input current: 10 A, input voltage: 400 V, Michael Deckel S11, conventional tool grinding machine. Fully functional. Includes spiral and clearance grinding attachment, radius grinding attachment, diamond dresser, setting gauge / dial indicator, various tool holders, indexing discs, guide bar, tailstock, grinding wheel mount, etc. Can be demonstrated under power. Iedpfx Ajxtu Dnodnea

Condition: new, The KSM 13 Tool Grinder from KNUTH is a compact and efficient solution for precise and cost-effective grinding of double-edged twist drill bits within the Tool Grinders category. This handy device offers simple operation, allowing users, even without prior knowledge, to achieve clean and precise results quickly. The KSM 13 features a motor rating of 0.12 kW and accommodates grinding diameters from 3 to 13 mm, making it versatile for various drilling needs. With included grinding wheels and common collets, it simplifies the process of chamfering the relief angle and point angle while ensuring optimal chip removal during the grinding path. This robust tool is an ideal addition to any tool crib, enhancing your grinding capabilities. Don't miss out on improving your tool maintenance; request a quote or buy now to obtain this indispensable tool grinder. Isdpjnh Nu Ujfx Adnoa

Condition: good (used), Year of construction: 1988, DECKEL S11 tool grinding machine - good condition - Scope of offer according to photos - EXW CH-4528 Zuchwil Iedpfer Elwkex Adnoa Technical data Clamping surface of the tool slide: 500 x 180mm Max. Tool diameter between the tips: 130mm Max. Tool diameter with flying clamping in the universal dividing head: 620mm Max. Tool lengths between centers: 270mm T-slot machine stand: 12mm T-slot grinding head, tool slide and accessories: 8mm Sanding stroke: 190mm Sanding stroke for twist sanding: 190mm Cross adjustment of tool slide: 100mm Vertical adjustment of sanding head: 325mm Longitudinal adjustment of grinding spindle: 5mm Tool carrier: 220mm Grinding head support: 800mm Universal dividing head on tool slide: 330mm Sanding head support: 360 degrees Sanding head: 360 degrees Tool carrier: 360 degrees Three-phase drive motor: 1.1KW at 2800 rpm Spindle speeds: Infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter: 125mm Max. Cutting wheel diameter: 200mm Weight: approx. 800 kg Dimensions: 800 x 1100 x 1760mm Space requirement: 2.5 x 2.3 m No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Tool Grinding Machine Michael Deckel S11 with Accessories and Tool Cabinet in Excellent Condition! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1673 Clamping Range: >> Tool slide mounting surface: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter with overhung mounting in universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot width on machine base: 12 mm >> T-slot width on grinding head, tool slide and accessories: 8 mm Travel Range: >> Working travels: Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Cross travel of tool slide: 100 mm Ijdpfx Asxu E Nqsdnoa Vertical feed grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels: Tool carrier: 220 mm Grinding head support: 800 mm Universal dividing head on tool slide: 330 mm >> Swivel angles: Grinding head support: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding Spindle: Three-phase drive motor 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10,000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Required space (including operation): 2.5 x 2.3 m Accessories and Equipment: 1 pc. Tool cabinet with contents: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small series can be ground astonishingly quickly, economically and flexibly, all while providing maximum operating comfort. The Deckel S11 is in excellent condition and comes equipped with extensive accessories. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: excellent (used), Year of construction: 2018, operating hours: 5,630 h, functionality: fully functional, machine/vehicle number: 551144, JG Group has an ANCA fx5 Linear for sale Loading system: Fast Load (not equipped with a robot) Special feature: Completely enclosed in the machine housing Application: Automation solution for small production volumes Access: Operator access from the front of the machine TECHNICAL DATA Maximum grinding spindle power: 9.5 kW Directly driven grinding spindle: yes Speed: 10,000 rpm Number of numerically controlled axes: 5 Grinding wheel diameter: 203.5 mm Grinding wheel changer: 2 sockets Axes X-axis: 384 mm Y-axis: 317 mm Z-axis: 217 mm C-axis: 230° A-axis: 360° A-axis rotation: 600 rpm Tool handling Suitable tool diameter: Ø2 - 20 mm Tool length range: 30 - 150 mm Loading time: 20 seconds Number of Ø2 mm tools: 153 Number of Ø12 mm tools: 36 Tool measurement and control Measuring probe mounted on the grinding head: yes Tool profile measurement: directly on the machine without dismantling the tool MACHINE DETAILS Iedswm H Hkopfx Adnja Concrete machine base polymer: yes Mounting dimensions: 1930 x 2190 x 2015 mm Machine weight: 4500 kg Connected power: 14.5 kVA Tool holder included.

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm Ijdpfx Aju Ng Npsdnoa table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 025, overall weight: 2,000 kg, grinding length: 15 mm, rotational speed (max.): 6,000 rpm, grinding diameter: 2 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obligates timely collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Grinding diameter: 0.1 – 2.0 mm Cutting length: 0 – 15 mm Helix angle: 24 – 45° Overall length: 30 – 50 mm Z stroke: 67 mm Y stroke: 35 mm A axis: 63° B axis: 360° Station 1: Robot for loading/unloading Shank diameter: 0.5 – 3.175 mm Station 2: Flute grinding and relief grinding Spindle diameter: 70 mm Spindle power: 0.30 kW Frequency converter: 2,000 – 6,000 rpm Grinding wheel for flutes, diameter: 150 mm Grinding wheel for reliefs, diameter: 100 mm MACHINE DETAILS Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,200 mm Weight: 2,000 kg Iodpfxsxnl Dho Adnsa EQUIPMENT Three-axis simultaneous + 2 robot axes

Condition: excellent (used), Year of construction: 1999, Profile grinding machine Döbeli FSM 150, built in 1999 Iodpfowarqbox Adnsa CNC profile grinder Control: Fanuc 18M Projection: Field of view: 300 x 200 mm Magnification: 10x, 20x, 50x Illumination: 12 V, 100 W Coolant unit tank capacity: 80 L Grinding head: rotation ±30°, inclination -15° Grinding stroke: Length: 78 mm Speed: 0-280 strokes/min Spindle motor: 1 HP Spindle speed: 4,000 rpm Grinding spindle wheel diameter: 150 mm Travel range: Profile width, CNC-axis X: 120 mm Profile depth, CNC-axis Y: 50 mm Linear axis :0.0001 mm Working table: Height adjustment: 80 mm Travel in workpiece height: 150 mm Max workpiece diameter: 200 mm.

Condition: good (used), Year of construction: 1997, Rollomatic CNC 600 X Tool Grinding Machine TECHNICAL DATA X-axis: 228 mm Y-axis: 177 mm Z-axis: 52 mm Ijdpfx Adswf Nn Ijnsa A-axis: -15 to 90° B-axis: -110 to 40° C-axis: 360° Resolution: 0.0001 mm Rapid traverse: 12 m/min Grinding spindle angle: 105° Power: 4.1 kW Speed: 2000 – 7200 rpm Max. grinding wheel diameter: 150 mm Dimensions: 2060 x 2032 x 1880 mm Weight: 3500 kg SCOPE OF OFFER Among other things: (list not exhaustive): Rollomatic CNC tool grinding machine, year of manufacture: 1997 Rollomatic Pick and Place Robot Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), Universal tool grinder Michael Deckel S11 with accessories and tool cabinet in very good condition !!! Technical data: >> Year of construction 1986 >> serial no. 759 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. Tool diameter between the centers 130mm >> Max. Max. tool diameter with flying clamping in the universal dividing head 620mm >> Max. Tool lengths between centers 270mm >> T-slot machine stand 12mm >> T-slot grinding head, tool slide and accessories 8mm Movement range: >> Working paths Sanding stroke 190mm Grinding stroke for swirl grinding 190mm Cross adjustment of tool slide 100mm Vertical adjustment of grinding head 325mm Longitudinal adjustment of grinding spindle 5mm >> Rough adjustment travel Tool carrier 220mm Grinding head support 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head support 360 degrees Grinding head 360 degrees Tool carrier 360 degrees Grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speeds, infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter 125mm Max. Cutting wheel diameter 200mm Dimensions: Weight 520 kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2.5 x 2.3 m Iodjqd N S Dspfx Adnja Accessories and equipment: 1 tool cabinet with the following contents: >> Universal dividing head SK40 >> Twist and relief grinding device >> SK40 radius grinding device >> Tailstock >> Swivel support finger >> Machine vice >> Sk 40 tool holders >> Measuring holder >> Intermediate bearing >> Setting gauge >> Support finger for radius cutter >> Tooth supports >> Indexing head >> Protective covers >> 1 set of collets as good as new from 1 to 17.5 mm 0.5 mm increasing >> Grinding wheel holders >> various grinding wheels >> dividing wheels >> suction device with vacuum cleaner >> various holders and much more (as shown in the pictures) About the machine : We are offering a Michael Deckel S11 universal tool grinding machine. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly quickly, economically and flexibly with maximum ease of use. The Deckel S11 is in very good condition and equipped with many accessories. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: good (used), Tool and cutter grinder VOLLMER model FS75F Iedpfsqutcwox Adnoa

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 090, overall weight: 2,000 kg, grinding length: 15 mm, rotational speed (max.): 6,000 rpm, grinding diameter: 2 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid constitutes a binding commitment to collect the item punctually between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Grinding diameter: 0.1 – 2.0 mm Collet: B 8 Cutting length: 0 – 15 mm Helix angle: 24 – 45° Overall length: 30 – 50 mm Z-axis stroke: 67 mm Y-axis stroke: 35 mm A-axis: 63° B-axis: 360° Station 1: Robot for loading/unloading Shank diameter: 0.5 – 3.175 mm Ijdpfx Adexnlyijnsa Station 2: Flute and relief grinding Direct-drive spindle diameter: 70 mm Direct-drive spindle power: 0.30 kW Frequency converter: 2,000 – 6,000 rpm Grinding wheel diameter flute grinding: 150 mm Grinding wheel diameter relief grinding: 100 mm MACHINE DETAILS Electrical data Operating voltage: 3 x 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,200 mm Weight: 2,000 kg EQUIPMENT Three simultaneous axes 2 robot axes

Condition: excellent (used), Tool & cutter grinder STEHLE model S811 Iodjw Hxbyopfx Adnea

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 022, overall weight: 2,000 kg, grinding length: 15 mm, rotational speed (max.): 6,000 rpm, grinding diameter: 2 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding obliges you to collect the machine on time between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS GRINDING RANGE Grinding diameter: 0.1 – 2.0 mm Cutting length: 0 – 15 mm Helix angle: 24 – 45° Overall length: 30 – 50 mm STROKE Z stroke: 67 mm Y stroke: 35 mm AXES A: 63° B: 360° Station 1: Robot for loading/unloading Shank diameter: 0.5 – 3.175 mm Overall length: 30 – 50 mm Station 2: Fluting and back grinding Direct drive spindle: 70 mm diameter, 0.30 kW Inverter: 2,000 – 6,000 rpm Iedpfexnlw Uex Adnsa Flute grinding wheel: 150 mm diameter Back grinding wheel: 100 mm diameter MACHINE DETAILS Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,200 mm Weight: 2,000 kg EQUIPMENT Three-axis simultaneous + 2 robot axes

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 0249, overall weight: 2,000 kg, grinding length: 15 mm, grinding diameter: 2 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid obligates you to collect the machine between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Grinding Range Grinding diameter: 0.1 – 2.0 mm Cutting length: 0 – 15 mm Helix angle: 24 – 45° Overall length: 30 – 50 mm Z stroke: 67 mm Y stroke: 35 mm Axes A: 63° B: 360° Station 1: Robot for loading/unloading Shank diameter: 0.5 – 3.175 mm Station 2: Flute and relief grinding Direct drive spindle diameter: 70 mm Drive power: 0.30 kW Inverter speed: 2,000 – 6,000 rpm Iodpfx Adjxnlu Hjnja Flute grinding wheel diameter: 150 mm Relief grinding wheel diameter: 100 mm MACHINE DETAILS Electrical Data Operating voltage: 3 x 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2300 x 2000 x 2200 mm Weight: 2000 kg EQUIPMENT Three-axis simultaneous operation 2 robot axes

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 278, workpiece weight (max.): 50 kg, grinding wheel diameter: 150 mm, grinding length: 340 mm, rotational speed (max.): 8,000 rpm, workpiece diameter (max.): 250 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bids are binding and require collection within the period 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Max. grinding wheel diameter: 150 mm Speed range: 1,000 – 8,000 rpm Workpiece spindle taper: SK 50 Max. workpiece weight: 50 kg Max. diameter: approx. 250 mm Iedpfx Adsxm Rnvsnja With tailstock: max. 125 mm Max. length: approx. 500 mm With tailstock: max. 250 mm Max. grinding length: 340 mm X-axis grinding stroke: 340 mm Y-axis traverse: 240 mm Z-axis traverse: 240 mm A-axis speed: 120 rpm A-axis swivel range: 360° C-axis speed: 20 rpm C-axis swivel range: 197° MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,000 x 2,400 mm Total weight: 2,500 kg EQUIPMENT Coolant filtration system Oil mist extraction Documentation