Used Tool Post Grinder for sale (39,653)

Condition: good (used), Year of construction: 2009, operating hours: 15,000 h, functionality: fully functional, total height: 35 mm, total length: 45 mm, total width: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 400 rpm, feed length X-axis: 35 mm, feed length Y-axis: 45 mm, feed length Z-axis: 45 mm, Machine for pignons and wheels production Iodpfx Ahjv I Rvme Nstb

Condition: good (used), Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 550607, feed length X-axis: 384 mm, feed length Y-axis: 317 mm, feed length Z-axis: 217 mm, grinding wheel diameter: 203 mm, rotational speed (max.): 10,000 rpm, Tool grinder with grinding wheel changer and Fanuc FastLoad automation Condition: There may be a defect in the control display. A similar machine, built in 2019, has already been successfully auctioned by the same seller! FastLoad Loading System Itodpfxsv T Uzqs Ah Njb Special Feature: Fully enclosed within the machine enclosure Application: Automation solution for low-volume production Access: Operator access from the front of the machine Gripper Set: One set for the entire diameter range Space Requirements: Does not increase the machine footprint TECHNICAL DETAILS Peak grinding spindle power: 9.5 kW Direct-drive grinding spindle: Yes Speed: 10,000 rpm Number of numerically controlled axes: 5 Grinding wheel diameter: 203.5 mm Grinding wheel changer: 2 slots Axes X-axis: 384 mm Y-axis: 317 mm Z-axis: 217 mm C-axis: 230° A-axis: 360° A-axis rotation: 600 rpm Tool Handling Suitable tool diameter: Ø2 - 20 mm Tool length range: 30 - 150 mm Loading time: 20 seconds Number of tools Ø2 mm: 153 Number of tools Ø12 mm: 36 Measurement and tool control Measuring probe mounted on the grinding head: yes Tool profile measurement: directly on the machine without removing the tool MACHINE DETAILS Polymer concrete machine base: yes Installation dimensions: 1,930 x 2,190 x 2,015 mm Machine weight: 4,500 kg Connected load: 16 kVA EQUIPMENT - Measuring probe mounted on the grinding head - Possibility of direct tool profile measurement - Polymer concrete machine base - Grinding wheel changer - Fanuc FastLoad automation

Condition: excellent (used), Year of construction: 2007, Tool Tempo Type : TT 280 BJ CA 2007 Iedpfx Ahjmxkm Ao Nstb

Condition: good (used), Year of construction: 2004, Peripheral devices MArke: Tool - Temp Type : TT - 157E Itsdpfx Aheh Hbpwo Neb Available 14x pieces

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Ijdpfx Aoxdh Hqsh Notb Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: good (used), For sale: PWB Swiss measuring device, model TOOL MASTER 310 Itsdpfx Aew Humleh Nob Very good condition, complete, ready for operation Package includes: • TMA 21 control panel • LED displays • Dial gauge • Measuring socket for holders Features: • X and Z axis measurement • Tool setting and calibration for CNC tools • Easy operation • Length and diameter measurement Original user manual included Brand: PWB Swiss Model: Tool Master 310

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Max. heating temperature - 90°C Medium - water Power: 9850 Watts The device has: Itsdpfsvzb Nqex Ah Neb - vacuum pump vaccum - vacuum tank - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 17,300 h, A used cooling unit from the Swiss manufacturer TOOL TEMP AG Itedpfx Aex Tr I Heh Neb Model: TT 54000 Year of manufacture: 2008 Operating hours: 17,300 Location: Upper Franconia _____ Our general terms and conditions apply. The seller is not liable for any typing or data transmission errors. All details and photos have been provided by the owner and released for publication. The appearance of the listed items corresponds to their age and the images shown. The condition of the technology and wear is appropriate for the age of the items. Used machinery is sold exclusively to commercial customers and without any warranty.

Condition: ready for operation (used), Year of construction: 2010, Grinder Sydelmann AU-200 For fresh and frozen meat Ready to work and delivery Iodpex A Alxsfx Ah Njtb

Condition: excellent (used), KOLBE MWE52 MIXER GRINDER Will produce up to 1700 kg/h of product Itsdpfx Ahjx Swxbe Nob

Condition: used, Used temperature control unit Item number: 10636 Make Tool-Temp Iodpsuuacfofx Ah Njtb Up to 90°C Total height 720mm Overall length 730mm Total width 300mm

Condition: ready for operation (used), functionality: fully functional, TT-188 temperature control units with MP-888 controller from TOOL-TEMP are available for sale; 4 units in stock. Iedpfxox Db Tks Ah Njtb Medium: water up to 90°C Heating capacity: 3KW + 6KW = 9KW Cooling capacity: 35KW Filling volume: 6 liters Mold drainage Pump capacity: 60 l/min, max. 4 bar Weight: 55 kg L: 670 mm - W: 260 mm - H: 650 mm

Condition: used, Avia FND-32N1 Tool Milling Machine. Itedpfx Aov R Ipcsh Nob Please check out our other listings as well.

Condition: good (used), Glass laminating system Type: Vacuum glass laminating system HVD-G02 Vacuum glass laminating system Glass laminating system, with 2 heating devices TOOL TEMP Model type TT-138B, S/N 310-1877-1, 310-1877-2 Laminating area approx. 2,900 x 1,400 mm, with feed table, stainless steel Control cabinet, area approx. 2,600 x 1,250 mm Control tower PC, 17" LCD monitor ACER Model/type AL711, mouse, keyboard The system consists of the following main components: Vacuum chamber (chamber + lid) Pneumatic lid drive Itedpfx Aodkp D Hsh Nsb Transport roller conveyor Lifting device Heating plates Chamber frame Vacuum technology (pumping station, valves, lines, feedthroughs, measuring technology, etc.) Pressure water temperature control device (2 piece) Transport pallet Lifting frame Control with control panel Technical data: Step-by-step pumping via valves adjustable up to 0.01 mbar; Heating / cooling: time adjustable via control Heating temperature directly adjustable on the pressurized water temperature control device (max. 140

Condition: ready for operation (used), Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B SPEZ, used machine Manufacturer: Tool-Temp Type: TT138 B SPEZ Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Itedpfxex Hgmwe Ah Neb Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Year of construction: 2017, condition: excellent (used), Tool temp TT-142N/ MP-988 (2017) TOOL-TEMP TT-142 N – Full Equipment & Technical Specification (English) Application: Model N – water up to 140°C Pump with axial mechanical seal Robust high-performance pressurized water temperature control unit Heating capacity: 12 kW Standard Equipment: 1. Temperature controller with self-optimization and digital display of set and actual temperature (°C/°F selectable) 2. Automatic temperature monitoring; alarm on deviation 3. Pump pressure gauge and system pressure gauge 4. Pressure reduction, venting, automatic water filling 5. Scale-resistant heat exchanger 6. Standard pump with axial mechanical seal 7. All water-contact components made from stainless steel or bronze 8. Heating elements switchable in stages 9. Safety features: automatic level control preventing dry running; mechanical safety thermostat; electronic maximum temperature limiter; main switch; isolation transformer; overload relay for pump protection; acoustic alarm 10. Visual fault indication 11. Unit on castor wheels Itsdpjx E Uqbofx Ah Nsb Special Features: 1. Digital flow indicator with minimum-flow monitoring 2. Optional MP-988 controller with digital interface Technical Data: Temperature range: water up to 140°C Temperature regulation: microprocessor-controlled controller MP-888 with self- optimization; digital display of set and actual temperature; automatic temperature monitoring Flow monitoring: electronic, digital display, automatic minimum-flow alarm Heating capacity: 12 kW (6/6 kW switching stages) Cooling capacity: indirect approx. 60 kW at 140°C Pump performance: motor 1.8 kW; pressure mode max. 5 bar / 110 l/min; suction mode vacuum up to 8 m water column; no booster pump External temperature measurement: no Pressure reduction: yes Leak-stop / mold emptying: no Filling: automatic Connections: Medium: ¾” BSP female Cooling water: ⅜” BSP male (inlet with filter), ⅜” BSP female (outlet) Dimensions and weight: 870 × 360 × 915 mm (incl. wheels) Approx. 107 kg empty Color: zinc grey RAL 7001 Electrical versions: Available for all voltages from 3×200 V to 3×600 V, 50/60 Hz UL/CSA compliant For US market: NPT connections, controller display in °F Electronic Controllers: MP-888 (standard): °C/°F display; analog interfaces 0–5 V, 0–10 V, 4–20 mA; high-precision control via self-optimization; flow indication in l/min or gal/min; minimum-flow alarm MP-988 (optional): digital interfaces RS-485, RS-232, 20 mA loop, CAN-bus, Profibus; supports common communication protocols; temperature difference monitoring; display of up to three temperatures

Condition: excellent (used), Double bench grinder Itodpok Iwx Ejfx Ah Njb

Condition: excellent (used), Meat grinder Omega 32. Wihout stand 1900 € With stand 2100 € Isdpfx Ahjx Ndqrs Nstb

Condition: like new (used), Meat grinder with mixer AK RAMOON 32. Ijdpfx Ahex Ndqfe Nstb

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Isdpfsx Emfkox Ah Njtb Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Itodpex Emd Tsfx Ah Njb Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Itjdpfxex A Sfhs Ah Neb Price is for the entire unit.

Year of construction: 2017, condition: good (used), Temperature control unit Tool Temp TT-181 Stock no.: 503647 Ijdpfjx A Swqsx Ah Nstb Machine/Device type: Temperature control unit Manufacturer: Tool Temp Type: TT-181 Year of manufacture: 2017 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: good (used), Year of construction: 2018, Temperature Control Unit Tool Temp TT-181 Stock No.: 503645 Machine/Device Type: Temperature Control Unit Manufacturer: Tool Temp Model: TT-181 Ijdpjx A Swkjfx Ah Nstb Year of Manufacture: 2018 Max. Operating Temperature: 150 °C Oil Max. Operating Temperature: 90 °C Water Heating Capacity: 9 kW Water / 3 kW Oil Circulation Medium: Water or Oil

Year of construction: 2017, condition: good (used), Temperature Control Unit Tool Temp TT-181 Stock No.: 503648 Machine/Device type: Temperature control unit Manufacturer: Tool Temp Itjdpfx Asx A Sv Tsh Nsb Model: TT-181 Year of manufacture: 2017 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil