Carbide tool grinder

DOEBELI D175

Condition: new, table diameter 315 mm 50 Kg 25 Kg chucking diameter 200 mm turning speeds 0 - 5 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 45 Kg Pgedei Hg I Dopfx Adnow dimensions of the machine ca. 800 x 600 x 600 m welding turntable with - With integrated tripod and universal welding torch holder - Quick chuck 200mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Year of construction: 2024, condition: new, The flattest wooden frame construction table in the world = 3 cm! Delivery without wooden boards. Text line break with the following data: Included components: 1 double rail (zero stop) - 10 perforated rails - 10 rack and pinion clamps - 14 adjustable stop blocks - 14 interchangeable pressure plates outer wall - Battery impact screwdriver - Bit adapter - 50 MMS 10x70/5 dowel - Hammer drill 8x165 dimensions: Pedpfxob Nrbns Adnjgw Clamping length from 0 to 3.550 mm hole grid 140 mm with plate width 1.250 mm = table length 12.350 mm max. clamping force approx. 250 kg stroke length clamp 340 mm height of stop blocks 100/160 mm The frame building aid was developed in order to precise production of timber frame elements. elements. Special attention was paid to the space requirements and the price. Due to the extremely flat it is now possible to change the surface by removing the the space by removing the clamps and stops. used in a different way. This is not only for small, but for all but for all company sizes a special advantage. After creating a flat surface, the tensioning rails are rails are aligned and anchored to the anchored to the floor. The intermediate spaces are covered with a 30 mm thick wooden panel to be mounted on site. filled. The same plate can be used to attach ramps to the edges. can be attached to the edges with the same plate. The level created in this way level can also be driven on with heavy vehicles vehicles, or can be used as a storage area. Thus the place can be activated only if necessary for the timber frame construction. be activated. The steel parts are galvanized. The entire assembly takes place on site. After adjusting the T [...]

Condition: excellent (used), Four-jaw chuck make Roto Record type DHK 315 x 4 short taper size 8 taper diameter 139,735 Pedog Rxh Iepfx Adnegw bolt circle diameter 171,4 mm diameter 315 mm Jaws individually adjustable

Condition: ready for operation (used), Year of construction: 1970, LZ-Lathe KERN Type:DS 20 AL Year 1970 with 3 jaws lathe chuck Forkardt 250mm, tool quick winder holder Multifix size C with holders coolant device. turning diameter overbed:500mm Pgsdpjgqxcisfx Adnsw turning diameter overplane : 250mm centre distance : 1000mm spindle speed: 12 -1200U/min Machine can be demonstrated under current Good guides .

Condition: used, Year of construction: 1970, x-travel:900 mm y-travel:250 mm z-travel:370 mm Pgodpfx Ascxxqrjdnsw table surface area:1525 x 325 mm total power requirement:9,85 kW weight of the machine ca.:3.1 t dimensions of the machine ca.:2,0 x 2,5 x 1,7 m

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 1040, Offer 23342 Hydr. welding turntable and tilting table - three axes - welding manipulator Technical data: - max. load capacity 750 kg - Flat plate diameter 700 mm - min. Table height in horizontal position approx. 720 mm - Average table height in horizontal position approx. 920 mm - Max. table height in horizontal position approx. 1060 mm - Working height manually adjustable in 3 steps - Faceplate mot.rotatable + swivel or tiltable - Rotation electr. infinitely variable approx. 0.01 - 2.0 rpm Pgodpfx Adoraiu Donow - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V - Connected load 1.5 kW - Manual remote control for direction of rotation, swivel or tilt - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg

Condition: used, 5tSWF Krantechnik GmbH Psdpfxedc A R Tj Adnsgw

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use Podpfsfg Rlcjx Adnogw of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm Pgedpfx Aob Tdqujdnow table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm weight: 3,3 t

Condition: used, Tool presetter EZSET EZ400 Pgsdpfx Asuhb Stsdnsw