Used Tns for sale (128)

Condition: ready for operation (used), A horizontal Malnati glass washing and drying machine is available. Nominal working width: 800mm, glass thickness range: 2mm-8mm, min. glass dimensions X/Y: 100mm/100mm, min. glass sheet spacing: 50mm, feed speed: 3.5m/min, washing brushes: 4. Machine dimensions X/Y/Z: approx. 2400mm/1350mm/1300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Lajdpfx Aoznmxgsfted

Condition: used, Year of construction: 1990, turning diameter 250 mm turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Ljdpfjt Hwq Dsx Aftoad Please ask for further details.

Condition: not inspected (used), Max dia 180 mm Max worklength 490 mm Lajdpszi Hrvefx Aftsd Diametre of spindle bore 60 mm Digital screen * Power needed 39 kW Long 2800 mm Wide 2130 mm Height 2090 mm Weight 4500 kg ACCESORIES * Coolant pump 1,5/5 bar-125 L

Condition: used, Year of construction: 1990, functionality: fully functional, Fanuc OT control 3 jaw Kitagawa chuck 620mm swing 1000mm between centres Lodjzakgtspfx Aftoad 10 station turret Tailstock Coolant pump and tank Swarf conveyor

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: Laedpfxsu Ix N Se Aftod multiple small parts 8 x machine feet without tailstock i.D. *

Year of construction: 1982, condition: ready for operation (used), General CNC slant bed lathe Traub is available. Tool stations: 12, tool holder: VDI40, turning diameter: 180mm, max. swing diameter: 450mm, max. turning length: 490mm, bar capacity: 60mm, travel X/Z: 160mm/490mm, rapid traverse: 15m/min, feed rate: 10m/min, machine dimensions X/Y/Z: approx. 3100mm/2000mm/1800mm, weight: approx. 4250kg, control: Traub System TX-8. An on-site inspection is possible. Lajdpey I Adbsfx Afted

Condition: good (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center Laedpfx Aeyc Nnzofted - TX8 D control - Complete technical data see photos - Year of manufacture 1994 - Hydrobar bar feeder - Various driven tool holders - Tool holders - Three-jaw chuck - Complete documentation Subject to errors and omissions.

Condition: new, AXDL160ZGR22-D-1000-1340-E0-00XX-C-A, NTN SNR planetary gearbox Model: AXDL160ZGR22-D-1000-1340-E0-00XX-C-A Ledsvrhtdspfx Aftead Condition: New

Condition: good (used), Technical Data for Pallet Racking System: Racking System: Arestant Type: NS Installation Specifications: Number of rack rows: 1 unit Length per rack row: 16,760 mm Number of bays per rack row: 6 units Number of levels incl. ground level: 3 units Volume Specifications: Pallet positions per bay: 9 units Pallet positions per rack row: 36 units Total pallet positions: 36 units Note: The images are for illustrative purposes only. Quantities shown may differ from the actual scope of supply! Scope of Delivery Includes: 07x Pallet rack uprights, used Color: sendzimir galvanized Profile dimensions: 80 x 70 x 2 mm Incl. horizontal and diagonal braces, baseplates Uprights are pre-assembled (bolted truss structure) 6,005 mm high 800 mm deep 36x Pallet rack beams, used Color: orange Beam type: M14051 Box profile: 142 x 50 mm Connector: 4 HK (hooks) Clear span: 2,700 mm 72x Safety pins, used Color: sendzimir galvanized For securing the longitudinal beams against accidental lifting 28x Anchor bolts, new Manufacturer: Hilti Laodpsw Tkmasfx Aftsd Type designation: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 14x Shims, used Finish: fully galvanized For leveling rack uprights placed on uneven floors 01x Load sign With details for bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. If transport or shipment of this item is required, additional costs will apply. These can be provided separately, depending on delivery location and scope, upon request.

Condition: good (used), Included in the delivery: 01x Base plate, new Manufacturer: Arestant NS Type designation: STD Base Plate BP80 Material finish: Sendzimir galvanized For frame profile width: 80 mm Material thickness: 6.00 mm Total width: 118 mm Total depth: 150 mm Ledpfxoxgp E Te Aftjad Height: 45 mm Number of mounting holes: 03 pcs. Hole diameter: 13 mm Weight per unit: 0.83 kg / pc. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be requested from us depending on the delivery location and scope of supply.

Condition: good (used), clear span: 2,700 mm, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data for the pallet racking traverse: Racking system: Arestant Type: NS The scope of delivery includes: 01x pallet racking beam, used Material color: orange Laodovi Errjpfx Aftsd Box profile: 100 x 50 mm Beam type: 10515CN Bracket: 4 HK (hooks) Clear width: 2,700 mm max. load per pair of beams 1,500 kg, with evenly distributed load. ( observe bay load ) 02x locking pins, used Version: completely galvanized For securing the side members against unintentional lifting out General information about the item: This item is only available for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), clear span: 2,250 mm, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data for the pallet racking traverse: Racking system: Arestant Type: NS Laodpfxjvi E Dhe Aftsd The scope of delivery includes: 01x pallet racking beam, used Material color: orange Box profile: 100 x 50 mm Beam type: 10515CN Bracket: 4 HK (hooks) Clear width: 2,250 mm max. load per pair of beams 1,500 kg, with evenly distributed load. ( observe bay load ) 02x locking pins, used Version: completely galvanized For securing the side members against unintentional lifting out General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), clear span: 3,300 mm, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data for the pallet racking traverse: Racking system: Arestant Type: NS The scope of delivery includes: 01x pallet racking beam, used Material color: orange Box profile: 100 x 50 mm Beam type: 10515CN Lasdpfxsvivw So Aftod Bracket: 4 HK (hooks) Clear width: 3,300 mm max. load per pair of beams 1,500 kg, with evenly distributed load. ( observe bay load ) 02x locking pins, used Version: completely galvanized For securing the side members against unintentional lifting out General information about the item: This item is only available for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: new, Transformer 220 V mono to 380 V tri Power converter: 10 kW New, never used Lasdpfx Afjzm St Hetod Dimensions (L x W x H): 800 x 600 x 500 mm

Condition: ready for operation (used), LTN Servotechnik SC100-02 / 04-L07 / L16 slip ring SN:16419395, used, normal signs of use, 100% functional, scope of delivery as per photos Lodpfomvkpbex Aftoad

Condition: ready for operation (used), Year of construction: 1989, turning diameter over cross slide: 340 mm, turning length: 560 mm, turning diameter: 560 mm, spindle bore: 63 mm, overall weight: 5,500 kg, Fanuc OT Length capacity: 560 mm Diameter over slide: 340 mm, turning diameter: 560 mm Turret: 10 stations Spindle: 11 kW Lodpfszbam Eox Aftead Chip conveyor

Condition: used, mileage: 144,000 km, power: 177 kW (240.65 HP), first registration: 11/2011, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, all wheel drive, Special equipment: Ljdpfx Aezaxthsftjad Trailer brake 2 - line, trailer coupling: towing coupling, trailer coupling: G 145, trailer socket 24V / 15-pole, audio system: CD radio (Bluetooth), differential lock front axle, cab variant: S (short with extended rear wall), electric window lifts, heated windshield, graphic info display with eco-meter, air dryer 1 chamber, heated, engine PTO front with tandem pump, parameterizable special module, reversing warning system acoustic (warning signal outside), rear window, seats in cab: driver's seat comfort suspension seat, sun visor outside, stabilizer rear axle reinforced (for extremely high load), stabilizer front axle reinforced, steel rims 11.00x20.0. Additional equipment: Emission standard EURO 5, axle configuration: 4x4, exterior mirrors electrically adjustable and heated, battery 115 Ah, cockpit distributor, sunroof (steel), differential lock rear axle, cab: tilting mechanism hydraulic, cab: S (short), suspension: leaf / leaf, generator 80 A, transmission 6-speed - type: G 60-6, urea tank (AdBlue): 25 liters, rear axle H 4, crown wheel 410, hydraulic steering gear LS 6 / LS 8, interior filter: pollen filter, body / superstructure: tipper, fuel tank: 125 liters, model update Atego 2, engine 6.4 liters - 175 kW diesel (OM 906 LA), engine start / stop system, engine brake with constant throttle, auxiliary drive MB 2C, auxiliary drive MB 60-2C with MPA, wheelbase 3260 mm, SCR system (AdBlue technology), side impact protection, seats in cab: passenger single seat, fixed, drum brake front and rear axle, underrun protection rear fixed, transfer case - VG 550 - 3W, immobilizer, permissible total weight 13.50 t.

Condition: good (used), functionality: fully functional, machine/vehicle number: 24732, Ficep 1105 punching machine, 110tns, multifunction machine, punching 30 x 25, shear 510 x 16mm, 400 x 19mm, 300 x 22mm, 200 x 25mm, 90º angle cutting 150 x 150x16mm, 45º angle cutting 100 x 10 mm, round and square cut 50mm, punching max diameter 32 thickness 26mm, with several working elements, with electric stop, with different accessories, in good condition Ljdpfx Aotvfcmjftsad

Condition: good (used), Year of construction: 2020, functionality: fully functional, working width: 3,700 mm, welding power (max.): 2,200 kVA, wire diameter (max.): 25 mm, type of input current: three-phase, 1. EVG QC76/144-ZL/PV Wire Mesh Welding Line Description EVG High-Performance Mesh Welding Line - Type QC76/144-ZL/PV · Max. Sheet Width: 3,700 mm (Welding width: 3,600 mm) · Sheet Length Range: 1,500 mm – 12,000 mm · Wire Diameter Range: Line wire (6 – 25 mm) / Cross wire (6 – 16 mm) · Max. Working Speed: 90 CW (cross wire) / min. · Line Wire Spacing: 75 mm – 1,000 mm (Steplessly programmable) · Cross Wire Spacing: 50 mm – 2,000 mm (Steplessly programmable) · Number of Line Wires: Max. 33 wires · Input Material: Pre-cut and straightened line and cross wires (Cold-formed/Hot-rolled) · Power Rating: 2,200 kVA (Driving power: 120 kW) Key features · Versatility: Optimized for the economic production of special sheets and engineered fabric, even for the smallest lot sizes. · Precision: Features steplessly programmable spacing for both line and cross wires, allowing for highly customized mesh designs. · Heavy-Duty: Capable of welding large diameter wires (up to 25 mm), suitable for structural and industrial applications. · Automation: Advanced cascade welding system (automatic) for efficient multi-diameter operations. 2. EVG DRE16 Wire Straightening Machine Description EVG DRE16 High-Speed Wire Straightening and Cutting Machine · Wire Diameter Range: 8 mm – 16 mm · Max. Feed Speed: 160 m/min. · Max. Wire Strength ($Rp0.2): 600 N/mm2 · Driving Power: 85 kW · Power Supply: 380 V, 60 Hz, 3ph · Color: RAL 7001 (Grey) / RAL 3011 (Red) · Standard Compliance: EN 60204-1, IEC 60364-4-41 TN-C Lajdey Aig Sopfx Aftod Key features · High Productivity: Offers a superior straightening speed of up to 160 m/min, ensuring high throughput for downstream welding lines. · Material Compatibility: Specifically designed to handle high-strength wire up to 600 N/mm2. · Reliability: Built with EVG’s renowned precision engineering for consistent straightening quality and long-term durability. * Machine can be seen in factory.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, Equipment: documentation/manual, We are offering this like-new Focke HMP cardboard case packing machine, manufactured in 2021. Lajdpfx Afszncw Seted The Focke HMP (Highly Modular Packer) is a compact and modular packaging machine from FOCKE & CO, which combines the erecting, grouping, filling, and closing of cardboard boxes on a single platform. It packages products such as trays, wrap-around cartons, or trays with lids at a high speed. Year of manufacture: 2021 Serial/Documentation number: 21570 Power supply (customer) – Voltage: 3 × 400 V Mains frequency (customer): 50 Hz Rated current: 25 A Rated short-circuit switching capacity (Icu): 10 kA Minimum single-phase short-circuit current: 0.35 kA Protective grounding system (customer): TN-S Power supply (machine) – Voltage: 3 × 400 V Mains frequency (machine): 50 Hz Control voltage: 24 V DC Protective grounding system (machine): TN-S If you have any questions or need more information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1FK7060-2AC71-1BA2, power: 1.1 kW (1.50 HP), nominal power: 1.1 kW (1.50 HP), rotational speed (min.): 2,000 rpm, rotational speed (max.): 2,000 rpm, overall weight: 8 kg, type of cooling: air, protection type (IP code): IP65, Transfer 1FK7060-2AC71-1BA2 SIMOTICS S Synchronous Motor 1FK7-CT PN=1.1kW; UZK=600V MO=6Nm (100K); NN=2000 rpm; self-cooled Design: IMB 5 (IM V1, IM V3) Flange 1 Power connector rotatable Single-turn absolute encoder 24-bit with Drive-CLiQ Interface (Encoder AS24DQI) Shaft with keyway, tolerance N, without holding brake, protection class IP65 DE flange IP67 Lajdpew Hbn Aofx Aftod 1,000 pcs Discount 1 Mat-PG: 762 AL: N ECCN: N Statistical commodity code: 85015220 Country of origin: DE GERMANY PUL: DE GERMANY AL BA BW CA CH CL CO CR DZ EC EG GT HN IL IS JO KR LB LS MA ME MK MX NA NI NO PA PE RS SV SZ TN UA XK ZA PRAEF: N TR 1,238.21 per unit -30.00 % 866.75 € 830

Condition: new, functionality: fully functional, Type: TFT (1) Part No.: 222549 (2) Part No.: 10892558 Condition: new Traub TFT monitor screen TX8D, TX8F, TX8H with frame, 1:1 replacement for the original connections, 12" Plug and Play solution Mitsubishi control, Traub TFT monitor screen, replacement display Traub ID: 222549 10892558 Lasdpjzmh Uysfx Aftjd e.g. for Traub CNC lathe series TNA: TNA700, TNA500, TNA480, TNA400, TNA300 TNC: TNC65, TNC65/42, TNC65 DG, TNC65 DGY, TNC42 DG, TNC42 DGY TND: TND400, TND360, TND300, TND200 TNS: TNS65, TNS60, TNS30, TNS26 DG, TNS26 DGY

Condition: new, mileage: 1 km, power: 353 kW (479.95 HP), tire size: 325/95 R 24, axle configuration: 6x6, wheelbase: 3,900 mm, fuel tank capacity: 590 l, color: white, driver cabin: sleeper cab, emission class: euro2, suspension: steel, Year of construction: 2026, = Additional options and accessories = Lajdpfx Afszl Uagstsd - 1 fuel tank - PTO = More information = Cab: TN Tyre size: 325/95 R 24 Brakes: drum brakes Suspension: leaf suspension Number of cylinders: 6 Number of berths: 1 Engine type: in-line Gearbox type: TipMatic

Condition: like new (used), functionality: fully functional, machine/vehicle number: WMA56EZZ9NM900210, mileage: 22,661 km, power: 346 kW (470.43 HP), first registration: 08/2022, fuel type: diesel, empty load weight: 21,535 kg, maximum load weight: 4,465 kg, overall weight: 26,000 kg, tire size: 385/65 R 22,5 u. 315/80 R 22,5, axle configuration: 6x6, wheelbase: 4,500 mm, next inspection (TÜV): 02/2026, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2021, loading space volume: 5 m³, loading space length: 3,800 mm, loading space width: 2,480 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, cable winch, crane, cruise control, differential lock, navigation system, onboard computer, parking heater, soot filter, traction control, trailer coupling, Vehicle number # 30103 Euro 6 D TN cab with 1 berth 6 x 6 all-wheel drive Wheelbase: 4,500 mm Leaf suspension Tyres: 386/65 R 22.5 and 315/80 R 22.5 Flatbed body (internal dimensions): 3,800 x 2,480 x 600 mm (front wall 1,300 mm) 390-litre fuel tank Differential lock Mechanical 8-speed splitter gearbox Air conditioning Parking heater PTO (power take-off) Cruise control Traction control FASSI loading crane F 455 RA 2.26 JIB L 214 Mech. boom extension PL 21 Cable winch type V20 4-way hydraulic outriggers Front stabilizers Air-suspended driver's seat/heated MAN Multimedia System Advanced Navigation system electric windows (2x) Laodpfx Afjv U Abnsted Electric exterior mirrors/heated Reversing camera MAN BrakeMatic 3-stage engine brake Fifth wheel coupling AHK Rockinger Duomatic/Standard Diesel particulate filter Sun visor Beacon lights Roof hatch LED daytime running lights Work lights 5 pairs of lashing eyes 4x large toolboxes 2x small toolboxes Headlight range adjustment Multifunction steering wheel On-board computer RIO-Box Off-road reduction gear ABS Offroad Hill-holder brake Roller blind left Drum brakes Lease purchase or financing available on request!

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm Ljdpfx Afozizrkotoad 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)