Used Tns for sale (138)

Condition: used, empty load weight: 9,500 kg, maximum load weight: 50,500 kg, overall weight: 60,000 kg, axle configuration: > 3 axles, first registration: 08/1996, loading space length: 9,300 mm, loading space width: 2,550 mm, loading space height: 1,130 mm, loading space volume: 26 m³, total length: 9,300 mm, suspension: air, color: yellow, Year of construction: 1996, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 402001 Goldhofer, TN-L6-50/80 * Year of manufacture: 1996 * ABS (Anti-lock Braking System) * Air suspension * Self-tracking steering axle * Air connection coupling head (red/yellow) * 2x 7-pin electrical connector * 15-pin electrical connector * Lifting and lowering device * Heavy-duty lashing eyes * Suspension: Air * Gross vehicle weight: 60,000 kg * Unladen weight: 9,500 kg * Payload: 50,500 kg * Permissible gross weight: 60,000 kg * Axle manufacturer: BPW * Internal dimensions: L = 9,300 mm, W = 2,550 mm, H = 1,130 mm * Internal volume*: 27 m² * Pallet spaces: 23 * Heavy-duty trailer * Platform height: approx. 1,130 mm * Axles 5 + 6 with self-tracking steering * Tires approx. 60% tread remaining all round * 50 mm towing eye Lsdjyib Tyjpfx Ahvjhd Disclaimer: Subject to prior sale, changes, and errors excepted. More photos and videos available on our website. Our extensive services include, for example: * Purchase, sale, and rental of commercial vehicles * Fast, straightforward financing solutions * Processing of all (export) documents * Ordering of export/transit license plates * Vehicle preparation: new tarpaulins, signwriting, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transfer of commercial vehicles Please contact our trained team – we are happy to advise you.

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit Rinser | Krones | Variojet | 2002 | Rotary Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer Labeller | Krones | SV 360-10-113 | 2002 | Rotary Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats Palletizer | Krones | Pressant Compact 1N | 2002 Stretch wrapper | Robopac | Rotoplat | 2002 Air conveyor | Krones | Airco S | 2002 | For blown PET bottles Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles Pack conveyor | Krones | Multico S | 2002 | For product packs Pallet conveyor | Krones | — | 2002 | For pallet transport Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Ljdpfxoxhf Hij Ahvshd

Condition: used, mileage: 472 km, power: 375 kW (509.86 HP), first registration: 05/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN TGS 33.510 BB 6x4 CH chassis truck with first registration in 05/2025, 33 ton variant, 6x4 drive, wheelbase 3.30 m, 510 hp, with PTO, air conditioning, refrigerator, trailer coupling, gross train weight 59 tons, with manufacturer’s warranty, and much more. MAN ATS warranty valid until 25.09.2026 Rated payload: 33 tons Permissible gross vehicle weight: 26,000 kg Permissible total vertical load (technical, plus): 28,000 kg Medium-high design TN long cab with single sleeper bunk and rear window Diesel engine with 375 kW (510 hp) and 2,600 Nm torque 6 x 4 drive Wheelbase: 3,300 mm, rear frame overhang: 800 mm Differential locks on rear axles MAN TipMatic 12.28 OD gearbox Transmission PTO, gearbox-dependent, type NH/4c, without flange, ratio f=1.14, position approx. 2:30 High-performance engine brake MAN EVBec, adjustable MAN EfficientRoll transmission function MAN Rocking mode (creep mode) Transmission for increased thrust during driving operations MAN Idle Speed Driving transmission functionality MAN TipMatic Performance and Efficiency drive programs, up to 70,000 kg MAN TipMatic Offroad drive program, up to 70,000 kg MAN TipMatic Manoeuvre program for low-speed maneuvering Lhedpfx Asx I T S Nehvjd MAN EasyStart hill start assist Full brake assist ABS, EBS, ASR, ESP Front and rear axles leaf sprung Front axle: 9,500 kg; rear axle: 13,000 kg Stabilizer on front and rear axles Axle ratio i=3.63 ROCKINGER type 400 G 150A drawbar coupling with air connections for trailer load up to 40,000 kg (technical plus) 59,000 kg permissible gross train weight (technical plus) Automatic climate control (Climatronic) Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind driver's cab roof 2 LED roof beacons on driver's cab LED tail and daytime running lights 2 LED contour and side indicators Preparation for reversing camera Extendable refrigerator in cab Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operating panel, 2 functions, operable from outside with door open Air-suspended and heated driver comfort seat with lumbar support and shoulder adjustment Comfort seat covers Smartphone integration MAN SoundSystem MAN Media System Advanced Navigation, 7-inch New vehicle with manufacturer’s warranty Price NET excluding 19% VAT. We are happy to offer you attractive financing options. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2509

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Revamped and upgraded 2018 for aluminium. Lhsdovtpdgjpfx Ahvjd Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm

Condition: used, Automatic packing machine Manufacturer : MAIR Model : .90.D.5.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE/M/TS-31 J-WILT/4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 3,5 - 10 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/5/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station Lhjdpfxsvtp Hbe Ahvod - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 3,5 – 10 m Rectangular bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 3 Tn

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: VT0650, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, workpiece length (max.): 1,100 mm, workpiece width (max.): 600 mm, workpiece height (max.): 600 mm, number of slots in tool magazine: 32, controller model: 840D, torque: 119 Nm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle motor power: 19,000 W, nominal power (apparent): 19 kVA, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: SK40, Equipment: chip conveyor, rotational speed infinitely variable, SPINNER VC1150 travel paths X1150, Y620, Z600 mm in "Compact" version in particularly heavy cross slide design for high-performance machining with patented guide cover concept therefore uniquely low chip fall and small installation area High-performance MILLING SPINDLE up to 10,000 rpm with belt drive for particularly high torque Mmax=119Nm Pmax=16KW for use in universal machining in mechanical engineering PRODUCTION PACKAGE VC1150-Compact INCREASED SPINDLE POWER from 16KW -> to 19 KW (Pmax) INCREASED RAPID TRAVEL Lhodpfevpf A Rox Ahvsd Rapid traverse in X/Y/Z axis increased to 30m/min Tool holder on spindle SK40 DIN69871 with pull bolt DIN69872-A / ISO 7388-3-AD TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in X/Y/Z axis SIEMENS 840DE control system with the following basic features: - Height-adjustable and rotatable control panel for good ergonomics - 19" liquid crystal flat color screen with multi-touch functionality - incl. engraving cycles - 2 GB user memory - 15 zero point shifts - 1 free USB interface - Ethernet interface standard PORTABLE HANDWHEEL SHOPMILL 3D SIMULATION of the finished part RESIDUAL MATERIAL RECOGNITION DXF reader TOUCH FUNCTIONS for integrating measuring probes Energy saving function incl. automatic machine shutdown UNIVERSAL CHIP CONVEYOR VC1150 PREPARATION of the spindle FOR HIGH PRESSURE for use of the additional tank up to 22 bar HIGH PRESSURE TANK 22 bar with paper belt filter for flushing centrally through the spindle Additional blowing air on the headstock Compressed air centrally through the milling spindle Flushing gun in the work area PREPARATION FOR SPINNER STANDARD MEASURING PROBE Wireless SPINDLE PROBE Electrical PREPARATION FOR EXTRACTION for the installation of a standard extraction system recommended by Spinner STANDARD DOCUMENTATION GERMAN Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-wire) PACKAGING Notes: The price only includes warranty services within Germany. For new and demo machines, the pictures are not necessarily the pictures of the individual machine but of comparable machines Accessories shown such as clamping devices or tool holders are only included in the scope of delivery if they are listed in the technical description. Ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. The prior sale is expressly reserved.

Condition: used, mileage: 481 km, power: 184 kW (250.17 HP), first registration: 02/2026, fuel type: diesel, overall weight: 17,500 kg, axle configuration: 2 axles, color: red, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New vehicle: M.A.N. TG3 17.5 t single-tired special chassis without registration, designed for heavy off-road use. All-wheel drive 4x4 with full locking differentials and a wheelbase of 4.50 m, single tires, high-clearance design, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, and much more. With MAN manufacturer’s warranty Equipment: - TN crew cab with 3 seats - High-clearance design - All-wheel drive 4x4 - Wheelbase: 4,500 mm - Mileage approx. 481 km (transfer kilometers) - Single tires - Suitable for bodies up to approx. 6.50 meters - Curb weight: 6,607 kg - GVW: 17,500 kg - Payload: up to 10,893 kg at max permissible GVW - Engine: MAN D0836 LFLBN, 250 HP, without torque limitation - Euro 6e - Differential locks on front and rear axles - MAN G102 transfer case with road and off-road ranges - Electronic transfer case lock management (VSM) - MAN PowerMatic 08.13 OD automatic transmission - MAN Idle Speed Driving transmission function - MAN TipMatic Efficiency driving program up to 70,000 kg - MAN TipMatic Offroad driving program up to 70,000 kg - MAN TipMatic Emergency program - Air conditioning - Auxiliary water heater, 4 kW - Towing hitch Ringfeder type RF40/G150B with air connections - Permissible gross combination weight: 28,000 kg - Trailer load: 16,845 kg - Center axle trailer load: 16,000 kg - Leaf spring suspension on front and rear axles - Front axle 9,000 kg, driven planetary hub axle, switchable, with diff lock - Rear axle HP-1333, 13,000 kg, single wheels, with differential lock - Axle ratio: i=6.00 - Stabilizer for front and rear axles - Shock absorbers on front and rear axles - Electronic braking system (EBS) - High-performance engine brake MAN EVBec - Roll-away protection MAN EasyStart - Drum brakes on front and rear axles - ASR, ESP, ABS - Emergency Brake Assist (EBA) - Front Detection - Tire pressure monitoring system (TPM) with tire temperature display - Driver attention alert MAN AttentionGuard - Alcohol interlock preparation - Cruise control - Multifunction steering wheel - 150-liter fuel tank - Roof hatch - LED daytime running lights - LED taillights - Stone chip protection for front headlights - Electrically adjustable and heated exterior mirrors - Premium air-suspended driver’s seat package, Plus air-suspended co-driver's seat package - Air-suspended comfort driver’s seat with lumbar support and shoulder adjustment - Air-suspended comfort center seat with integrated belt system, offset rearward - Air-suspended comfort co-driver's seat Lodpfextc H Dox Ahvshd New vehicle without registration, delivered with MAN manufacturer’s warranty Net price plus 19% VAT. Attractive financing options available on request. All information subject to change. Errors and prior sale reserved. Internal vehicle number: 2594

Condition: used, SLITTING LINE GEORG 1500x1.5x25 Main technical data Coil thickness: 0.24 – 1.5 mm Uncoiler coil weight: 25 Tn Coil width: 230 - 1500 mm Coil outer diameter: Max. 1850 mm Working speed: 200 m/min Slitting tolerance: +/- 0.125 mm Line direction: Right to left Recoiler coil weight: Max. 16 Tn 2 Slitting heads PLC: Siemens S7 1200 Cutting capacity: number of cuts with 350 MPa 24 cuts for thickness 0.25 mm 28 cuts for thickness 0.50 mm 21 cuts for thickness 0.75 mm 18 cuts for thickness 1.00 mm 15 cuts for thickness 1.25 mm 12 cuts for thickness 1.50 mm Scope of supply 1. Coil Carriage 2. Uncoiler 3. Guiding system with 2 measured edges 4. 203.2 diam. Pinch roll before shear 5. Double interlock table 6. Slitting shear:Shaft diameter: 160 mm 7. 1 off line quick change slitting head available 8. Scrap press and conveyor 9. Intermediate coil table 10. Loop Pit and covering tables 11. Strips Braking Unit 12. Motorised recoiler with hold down separator arm 13. Unloading Coil Car 14. 4 arms turnstile 15. Electrical cabinets & Control panels 16. Existing tooling 17. Existing documentation Coil thickness: 0.24 – 1.5 mm Ljdpfx Ahoxl R A Revjhd Uncoiler coil weight: 25 Tn Coil width: 230 - 1500 mm Coil outer diameter: Max. 1800 mm Working speed: 200 m/min Slitting tolerance: +/- 0.125 mm Line direction: Right to left Recoiler coil weight: Max. 16 Tn Slitting heads: 2 PLC: Siemens S7 1200 For thickness 0.25 mm: 24 cuts with 350 MPa For thickness 0.50 mm: 28 cuts with 350 MPa For thickness 0.75 mm: 21 cuts with 350 MPa For thickness 1.00 mm: 18 cuts with 350 MPa For thickness 1.25 mm: 15 cuts with 350 MPa For thickness 1.50 mm: 12 cuts with 350 MPa

Condition: good (used), PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board Lhederb E Ewopfx Ahvsd -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: FDL-150-100E/NC, total length: 1,200 mm, pressing force: 150 t, table width: 800 mm, working height: 600 mm, clearance between the columns: 1,250 mm, Equipment: documentation/manual, safety light barrier, DOUBLE-COLUMN HYDRAULIC PRESS WITH TWO SIDE CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR ROTOR SHAFT EXTRACTION, AS WELL AS FOR SHAFT EXTRACTION IN CASE OF REPAIR Lsdswpg Awjpfx Ahvohd It features an extendable table for stacking and handling rtors and stators. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Mechanically movable grooved table measuring 1200 x 800 mm with a stroke of 1,200 mm, equipped with a worm gear reducer and a 0.5 HP electric motor with brake. • Central drill on the table with a diameter of 250 mm and a maximum depth of 550 mm. • Useful lifting capacity of the table for moving 4 tons. • Movement speed of 30 mm/sec. • Front interior width of 1250 mm (space between columns). • Working height of 600 mm. MAIN CYLINDERS: 150 TN • Two 75-ton hydraulic cylinders (150 tons total), with a stroke of 1200 mm connected by a plate with a central hole of 250 mm in diameter. • Maximum useful height of the cylinder plate: 1,440 mm. • Minimum useful height of the cylinder plate: 200 mm. ABSTRACTION CYLINDER • One 100-ton central cylinder with a stroke of 1200 mm. • Designed to accommodate an abstraction clamp, end of the rod threaded to M 35.150 x 40 mm length. • Maximum useful height of the abstraction cylinder: 1600 mm from the root of the rod thread. • Minimum useful height of the abstraction cylinder: 400 mm from the root of the rod thread. HYDRAULIC GROUP • Two-speed hydraulic group with 5.5 HP power “Siemens Motor”, with automatic disconnection of high speed and independent speeds. Maximum pressure: 250 bar. • Pressure regulation system using proportional valves. • Air-oil cooler. • Temperature sensor. • Hydraulic group located on the right side. ELECTRICAL INSTALLATION AND SAFETY • Equipped with a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 12” HMI touchscreen mod. MTP with 99 memory slots allowing adjustment of pre-pressing power, pressing, calendering, and stroke of the pressing and extraction cylinders, as well as the holding times during processes. • Electrical and hydraulic maneuvers are redundant and self-controlled. They include an additional safety block and self-control devices for operation and safety. Includes verification and certification of correct operation and safety distance for photoelectric cells. • The electrical panel includes a selector for choosing the type of work in manual, semi-automatic, or automatic position and a selector for high-speed or low-speed operation. • Operation is performed via a two-hand low-voltage electrical pushbutton. • All installed electrical materials are Siemens, including relays, contactors, main motor, etc. • Ready for Industry 4.0. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector.

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 7,000 mm, total width: 4,750 mm, total length: 6,000 mm, pressing force: 1,000 t, reverse speed: 60 mm/s, The MV-1000E/NC-SINCRO hydraulic press is custom-designed for the adjustment of progressive dies. It features a tilting upper table and a movable lower table made of C45E steel, machined with DIN-650 T-slots to ensure minimal friction in the vertical movement of the upper table. This is achieved through the installation of maintenance-free bimetallic bushings and perfect parallelism ensured by four high-mechanical-resistance cylindrical columns of 300 mm in diameter, chrome-plated and rectified. STRUCTURE AND TABLES • Features a structure made from oxy-cut steel divided into three electro-welded monoblocks, exclusively manufactured from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Cylindrical columns with a diameter of 300 mm, high mechanical resistance, rectified, and chrome-plated to maintain a low friction and wear coefficient. • Upper table with T-slots and anti-fall safety system. • Useful table surface: 4,750 x 2,250 mm. • Structure designed to support 600 TN of concentrated force on 1/3 of its surface. • Lower table designed to support up to 50 TN in displacement, supported by bronze guides with graphite load and mechanical positioning centers for precise table positioning. CYLINDER AND HYDRAULIC GROUP • 6 single-acting cylinders with lapped sleeves, chrome-plated pistons, and anti-wear guides. • Four 50 TN hydraulic compensators located at the ends of the lower table. • 800-liter hydraulic group with a silent Denison pump, automatic disconnection of the fast approach pre-filling speed, and equipped with a decompression system in working speed. • Proportional pressure system and optical gauges for displacement control on the upper table, with a synchro-electronic system for compensating off-center or unbalanced forces. • Hydraulic group cooling system with an independent air-oil radiator unit. • All M series hydraulic presses include a lateral pressure switch to adjust the most suitable pressure setting for each type of work. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC model SIMATIC S7 1200 and a 12” touchscreen. Allows programming of semi-automatic and automatic operating modes, power, travel, and upper table dwell time. Capable of storing 300 recipes, with each recipe able to program all the above values. • Low voltage operation via two-hand pushbutton. • Anti-fall safety system with hydraulic safety jaws. • Level IV photoelectric barriers installed at the front and rear. • Lateral protections with opening and safety microswitches. TECHNICAL SPECIFICATIONS Power tn 125 - 1000 Opening Force tn 100 Powered Speeds 1 Engine Power kW 75 Fast Pre-Fill Speed mm/s 100 Variable Working Speed mm/s 12-4 Return Speed mm/s 60 Guide Diameter mm 300 Maximum Pressure Bar 290 Useful Table Area mm 4.750 x 2.200 Lower Table Displacement mm 2.200 Vertical Travel of Upper Table mm 800 Between Columns mm 5.000 x 1.490 Total Front mm 6.000 Total Side mm 4.750 Total Height mm 7.000 Lhodpfxswpgwnj Ahvod Weight kg 150.000

Condition: like new (used), functionality: fully functional, machine/vehicle number: MV-300E/NC, total height: 3,500 mm, total width: 1,800 mm, total length: 2,300 mm, pressing force: 300 t, table width: 1,250 mm, table length: 1,250 mm, overall weight: 18,000 kg, pressure: 320 bar, Equipment: documentation/manual, safety light barrier, The MV-300E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for deep drawing, punching, and deburring tasks. Power tn 300 Motor Power kW 18 Piston Stroke mm 750 Approach Speed mm/s 110 Variable Working Speed mm/s 5-15 Return Speed mm/s 130 Guide Diameter mm 150 Lsdowphhnopfx Ahvohd Maximum Pressure Bar 320 Table Usable Area mm 1.250 x 1.250 Between Columns mm 1.250 x 940 Vertical Clearance mm 1.000 Total Frontal mm 2.300 Total Lateral mm 1.800 Total Height mm 3.500 Weight kg 18.000 STRUCTURE AND TABLES Consists of three electrowelded blocks made exclusively of S355JR steel. Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed using finite element software. The bottom table has a 50 Tn hydraulic cushion with a useful surface of 950 x 750 mm and three front consoles to support the die outside the press.Incorporates a SIEMENS KP-700 COMFORT NC for the regulation of the top table stroke, speed changes, and cushion regulation. CYLINDER AND HYDRAULIC GROUP 2 single-acting cylinders with lapped sleeves, chromed pistons, and maintenance-free anti-wear guides. 2 auxiliary double-acting cylinders for fast approach and return speeds. Variable speed motorized hydraulic group. Includes cylinder decompression valve. Silent hydraulic pump. All hydraulic presses of the M series include a pressure switch located on the side, allowing the most suitable pressure setting for each type of work to be regulated. Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY Incorporates a Siemens SIMATIC S7 1200 safety PLC and a 7” KTP-700 COMFORT touch screen located on the electrical panel. Allows programming of semi-automatic and automatic modes, power, stroke, and dwell time of the top cylinder and cushion. It has a storage capacity of 300 recipes, each recipe can program all the above values. Prepared for Industry 4.0. The electrical panel includes a selector that allows choosing the type of work to be performed in manual, semi-automatic, or automatic mode and a selector to choose operation in fast or slow speed. Electrical and hydraulic maneuvers are redundant and self-controlled. They incorporate an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of correct operation and safety distance for photocells. Operation is carried out by low voltage electric pedal. For safety, they incorporate category IV photoelectric barriers located in the front working area, two fixed side guards, and a practicable guard with a magnetic disconnection detector located at the rear.

Condition: like new (used), functionality: fully functional, machine/vehicle number: MV-600E/NC, pressing force: 600 t, table width: 990 mm, table length: 890 mm, operating speed: 5 mm/s, overall weight: 23,000 kg, reverse speed: 18 mm/s, Equipment: documentation/manual, safety light barrier, The MV-600E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for stamping, deep drawing, punching, and deburring tasks. Power tn 600 Motor Power 40 HP a 440 Vca / 60hz Working Speed mm/s 5 Approach Speed mm/s 15 Lhodewpggiopfx Ahved Return Speed mm/s 18 Piston Stroke mm 1.015 mm - (40”) Guide Diameter mm 200 Table Usable Area mm 990 x 890 x 130 (39” x 35” x 5”) Between Columns mm 990 x 370 Vertical Clearance mm 1.625 - (64”) Working Height mm 990 - (39”) Lower Hydraulic Knockout Tn 80 Lower Knockout Stroke mm 406.4 - (16”) Upper Hydraulic Knockout Tn 80 Upper Knockout Stroke mm 406.4 - (16”) Total Frontal mm 1.850 Total Lateral mm 1.700 Total Height mm 4.500 Weight Kg. 23.000 Kg. approx. Equipped with a top and bottom table made of C45E steel, machined with DIN-650 slots, and a removable upper counter-table of 990 x 890 x 130 mm for die holders with “T” slots. We ensure minimal friction in the vertical movement of the top table through the installation of maintenance-free bimetallic bushings, with perfect parallelism achieved by four chromed and ground cylindrical columns. It uses an optimized hydraulic system with a pressure of 320 Bar, ensuring prolonged durability and reliability in its performance. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of three electrowelded blocks made exclusively of S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Incorporates a SIEMENS SIMATIC S7 1200 PLC and a 7” HMI KTP-700 touch panel. This allows programming of the power, cylinder stroke, and speeds, with a storage capacity of 300 memories for different work cycles. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chromed piston, and maintenance-free anti-wear guides. • Motorized hydraulic group with two speeds and automatic disconnection of fast speed. High-pressure pump and 10-micron return filter. Includes cylinder decompression valve, directional valve, and safety valve. A pressure switch located on the side allows the most appropriate pressure setting for each type of work. • Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel incorporates a selector to choose manual, semi-automatic, or automatic operation modes, and another selector for fast or slow speed operation. • Equipped with a PLC to internally assist with maneuvers and decompression time. • Operation is carried out using a low-voltage electric two-hand button panel. • Electrical and hydraulic maneuvers are redundant and self-controlled, incorporating an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of proper operation and safety distance for photocells. • For safety, category IV photoelectric barriers are incorporated in the front work area, two fixed side protections, and a movable protection with a magnetic disconnection detector at the rear. • Machine equipped with an IXON system for online communication in case of faults or reprogramming. • Ladder with upper walkway for repair access (scaffold).

Condition: like new (used), functionality: fully functional, total height: 3,250 mm, total width: 3,650 mm, total length: 6,000 mm, pressing force: 400 t, table width: 2,520 mm, table length: 6,000 mm, operating speed: 3 mm/s, overall weight: 28,500 kg, reverse speed: 18 mm/s, pressure: 319 bar, power: 11 kW (14.96 HP), The TL-400-6000E hydraulic press belongs to the T/NC series and is custom-designed for straightening large welded structures and oxy-cut plates. Like all the hydraulic presses in the T/NC series, its design facilitates the loading and unloading of large pieces, plates, or structures. It allows access to different pressing points without the need to move the piece, thanks to the lateral movement of the cylinder and the longitudinal movement of the bridge. Power tn 400 Engine Power kW 11 Working Speed mm/s 3 Lhodowpgmvjpfx Ahvod Approach Speed mm/s 10 Return Speed mm/s 18 Maximum Pressure Bar 319 Piston Stroke mm 450 Lower Table mm 6.000 x 2.520 Front Clearance mm 2.560 Vertical Clearance mm 700 Head Displacement mm 1.900 Bridge Displacement mm 4.900 Working Height mm 800 Total Front mm 6.000 Total Side mm 3.650 Total Height mm 3.250 Weight mm 28.500 STRUCTURE AND TABLES • Features an electrowelded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Longitudinal bridge movement is achieved using a frequency inverter and toothed belt. • Lateral movement of the head is motorized and controlled via a frequency converter. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free anti-wear guides. • Equipped with a removable and interchangeable pad to prevent wear on the piston and machined at the end to adapt to tooling. • Includes a standard anti-rotation device for the cylinder and a calibrated front with end-of-stroke switches to adjust the cylinder's travel. • Motorized hydraulic group with two speeds and automatic deactivation of high speed. • Includes a cylinder decompression valve. • Pressure regulator. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel includes a selector that allows choosing between manual or semi-automatic operation. • Also includes a selector for choosing high-speed approach or low-speed working. • Operation is carried out via a suspended control station with emergency stop and low-voltage operation. • Includes a maneuver confirmation button. • Includes a perimeter-mounted safety rope device.

Condition: like new (used), functionality: fully functional, total height: 3,500 mm, total width: 2,400 mm, total length: 1,000 mm, throat depth: 500 mm, pressing force: 300 t, table width: 1,000 mm, table length: 700 mm, operating speed: 14 mm/s, overall weight: 13,500 kg, reverse speed: 265 mm/s, working height: 1,100 mm, working range: 800 mm, pressure: 290 bar, Equipment: documentation/manual, safety light barrier, Power 300 TN Motor power 30 kW Throat depth 500 mm Working speed variable 14.9 to 9 mm/s Approach speed 178 mm/s Return speed 265 mm/s Maximum pressure 290 bar Stroke of piston 500 mm Lower table size 1,000 x 700 mm Upper table size 800 x 600 mm Max. vertical clearance 800 mm Lhsdpfowpf S Dex Ahvjd Working height 1,100 mm Total front 10,000 mm Total side approx. 2,400 mm Total height approx. 3,500 mm Weight approx. 13,500 kg.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 2,085 mm, total width: 1,290 mm, total length: 1,160 mm, pressing force: 50 t, table width: 700 mm, table length: 450 mm, overall weight: 1,750 kg, working height: 850 mm, pressure: 320 bar, Equipment: documentation/manual, safety light barrier, The motorized hydraulic C-frame presses of the CM/NC series have four different powers ranging from 50 to 150 tons. Specially designed for stamping, die cutting, and forming work. The latest generation CM/NC series hydraulic presses have evolved into a versatility of uses, such as the possibility of incorporating these machines into automatic production lines. Model CM-50/NC Power 50 tn Motor power 5,5 kW Throat depth 265 mm Working speed 9,9 mm/s Approach speed 45 mm/s Return speed 60 mm/s Maximum pressure 320 bar Piston stroke 250 mm Lower table 700×450 mm Lhedpfx Ajwphvrehved Upper table 550×300 mm Maximum vertical light 400 mm Working height 850 mm Total front 1.160 mm Total lateral 1.290 mm Total height 2.085 mm Weight 1.750 kg

Condition: used, Year of construction: 2023, New demonstration machine! List price: €86,567 net Base machine complete in standard configuration for drilling and grooving: For detailed technical data, please refer to the ProTec Type 0571 data sheet. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed modemax. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holders HSK63F with collet chuck 462E/OZ25, cutter length up to 130 mm. Information: Machining unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit. Connected load 12 kVA Rated current 17.5 A Fuse 32 A Voltage 400 V, 50 Hz, 3 Ph (without transformer) Network TN or TT Pneumatic connection 7 bar (102 psi). At the machine: coupling plug (quick coupling) ¼, DN7.2, brass, factory-supplied. For the machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side. Supply line, inner hose diameter 12 mm (min.). Compressed air consumption continuous operating air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection 3x extraction outlets dia. 80 mm. Extraction air velocity 30 m/sec - measured at the extraction outlet. Extraction requirement min. approx. 2500 m3/h. Machine weight approx. 1650 kg (with options!). Machine installation area: In general, a ProTec fix can be bolted to the floor. A concrete floor (or foundation) is required (at least at the four machine corners/feet). Equipment: Protec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for machine front, width 500 mm. Roller table 765 mm (Y-axis), foldable, for machine rear, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device with lamella curtain. Prerequisite for horizontal routing for Lamello P-System (without Lamello P-System tools). Drill bit set for Protec shank ø 10 mm with clamping surface (JSO) 1 HW-roof tip drill bit 5x70mm (NL 35mm), LH # 30566-5-05035-L 3 HW-dowel drill bits 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW-dowel drill bits 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW-dowel drill bits 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW-dowel drill bits 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW-dowel drill bits 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW-cup drill bit 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW-cup drill bit 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW-cup drill bit 35x70mm (NL 35mm), RH #30300-5-35070-R 1 HW-grooving cutter ø 125/30 mm groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and subject to agreement Tool holder HSK63 F 3.00 pcs For collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm 3.00 pcs Indexable insert shank cutter Z1+1 1.00 pc HW with indexable insert drill tip ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW indexable inserts Z1 1.00 pc with indexable insert drill tip, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separat Lhedpfsw Tfzfjx Ahved

Condition: excellent (used), Brand : CORREA Model : PRISMA-20 Type : CNC Cnc : HEINDENHAIN 530 Table dimensions : 2.000 x 900 mm Lhodpfox Dzf Tjx Ahvod Number of slot: 5 x 22 mm Distance between T slots: 200 mm Axis travels (X,Y,Z) : 2.000 x 1000 x 1000 mm Head type : Universal manual Taper : ISO 50 Speed range : 550 - 3.000 Spinale power : 22 kw Rapid traverse (X) : 12.000 mm/min Rapid traverse ( X) : 20.000 mm/min Maximum weight on table : 3.500 kg Machine weight : 14 tn Machine equipped with: Fairing Electronica hadwheel

Condition: excellent (used), Brand: CORREA Model: CF-22 PLUS Cnc: HEINDENHAIN 530 Table dimensions : 2.500 x 700 mm Number of slot: 5 Slot dimensions: 22 mm Axis travels (X,Y,Z) : 2.000 x 800 x 800 mm Lhodpfx Ahjxr A Iljvod Head type : Universal manual Tool camping : Hydraulic Taper : ISO 50 (DIN 69871) Speed range : 4.000 rpm Spinale power : 22 kw Rapid feeds : 12.000 mm/min Maximum weight on table : 4.000 kg Machine dimensions : 6.605 x 3.315 x 2.730 mm Machine weight : 10 tn Machine equipped with : Fairing Chip conveyor Electronica hadwheel

Condition: like new (used), operating hours: 349 h, functionality: fully functional, input voltage: 400 V, input current: 1,037 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP00, year of last overhaul: 2026, continuous power: 630 kW (856.56 HP), Equipment: type plate available, Exact model designation: Schneider MX eco 4V630 Output power and output current: 630kW | 1188A ME4C63AAA ° With test certificate! ° Only 349 motor operating hours - according to the manufacturer, over 100,000 possible! ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included ° 2 additional control cabinets with various components tailored to the inverter included (buying drive without extra components possible) The following additional components are installed (see pictures): ° 2 pcs. RFI 480/600-TN (RFI filters) ° 2 pcs. NH fuse switch disconnectors, size 3 | I = 630A ° 2 pcs. ABB AF580-30 | I = 800A (Power Contactor) ° 2 pcs. ABB AG09083735 (Circuit Breaker) ° SMF 480/1200 | 1200A (Sine Wave Motor Filter) Lhsdpfx Ahox U Dvrevod ° 2 pcs. ABB AF750-30 | I = 1050A (Power Contactor) Only 1 unit left in stock! This item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the item's visual condition. Fully functional and ready for immediate use.

Condition: like new (used), Year of construction: 2014, operating hours: 715 h, functionality: fully functional, machine/vehicle number: L62500, arm reach: 1,919 mm, total height: 3,200 mm, total width: 4,600 mm, total length: 5,200 mm, input voltage: 400 V, type of cooling: water, We are offering a Yaskawa TIG welding cell from October 2014 in as-new condition, with very few documented operating hours. The unit was used briefly and then decommissioned, as we no longer produce the components for which it was originally acquired. The system features a rotary table with a maximum capacity of 1000 × 1500 mm, enabling the alternate machining of two parts to optimize cycle times and maximize productivity. It is also equipped with a push-wire (wire feeding) system, useful for overlay welding or areas lacking base material. The installed TIG technology is high-performance, designed for applications demanding high-quality and repeatable weld seams. Technical support is available via Roboteco S.p.A. (Yaskawa), offering reliable after-sales service and an international support network. Ljdpfox Exl Nsx Ahvehd The machine is immediately available and located in Tre Ville (TN), Italy. The asking price includes: - Professional dismantling - Loading onto the buyer’s transport vehicle Detailed photos and further technical specifications are available upon request.

Condition: used, mileage: 9,300 km, power: 346 kW (470.43 HP), first registration: 08/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,500 mm, total height: 3,350 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, As-new and meticulously maintained M.A.N. 18-ton TGS flatbed truck with Palfinger PK 14.502 SH crane, featuring 6 hydraulic extensions with a lateral reach of approx. 17 meters and a vertical reach of approx. 20 meters, remote radio control, 5th and 6th control circuit, 6.20 m long platform, payload of 6.1 t, engine with 470 HP and 5.5 m wheelbase, only 9,300 km, PTO, rear air suspension, retarder, air conditioning, auxiliary heater, MAN Opti_View digital mirror replacement system, and much more. Equipment: - 20,500 kg permitted gross vehicle weight - TGS TN long cab with bed and rear window - Wheelbase: 5,500 mm - Euro 6e engine - 4x2 drive - Unladen weight: 11,860 kg - Payload: 6,140 kg at 18,000 kg GVW - Payload: 8,640 kg at 20,500 kg GVW - New aluminum flatbed with split sidewalls and 4-way sliding access steps - Flatbed dimensions approx. Length 6.20 m x Width 2.48 m x Height 60 cm - Palfinger PK 14.502-SH folding crane, mounted behind cab - Crane inspected at a Palfinger workshop - Crane safety inspection (UVV) valid until October 2025 - Max. lifting moment: 13.8 mt - Only 610 operating hours (according to hour meter) - PALcom P7 radio remote control - Engine start/stop with rev increase - Crane with 6 hydraulic extensions - Slewing and grab control - Oil cooler 10.5 kW - Crane outreach up to 16.80 m - Lifting capacities: approx. 4.20 m / 2,950 kg; 6.20 m / 1,840 kg; 8.20 m / 1,300 kg; 10.30 m / 970 kg; 12.50 m / 780 kg; 14.60 m / 660 kg; 16.80 m / 530 kg - Dual hydraulic outriggers with swiveling supports - Transport position monitoring - HPSC additional function: 2nd ballast - Crane safety inspection (UVV) new - PTO, transmission-mounted, type NH/4c, w/o flange, f=0.97, approx. 3:30 position - Rear axle differential lock - MAN TipMatic 12.26 DD gearbox - MAN retarder with MAN EVBec, multi-stage - MAN Idle Speed Driving and Rock-Free functions - Air conditioning, Climatronic - Additional water heater, 4 kW - Ringfeder towing hitch type 400 G 150A with air connections - Permitted total towing weight: 44,000 kg - Trailer load: 26,470 kg - Front axle leaf, rear axle air suspension - Front axle 9,200 kg, rear axle 13,000 kg - Axle ratio i=2.85 - Stabilizer front and rear - Rollaway prevention MAN EasyStart - Full brake assist - Emergency braking assistant EBA - EBS, ABS, ASR, ESP - Lane departure warning LDW - MAN Attention Guard - Reverse warning system - Cruise control - Sun visor - Multifunction steering wheel - MAN EasyControl panel: 4 functions operable from exterior with door open - Electric glass sunroof - Electrically adjustable and heated exterior mirrors - Electric windows - MAN SmartSelect infotainment control with touchpad and quick access buttons - MAN Media System Professional Navigation 12.3" - MAN Sound System - Digital side mirrors - Air-suspended comfort driver's seat with lumbar support, shoulder adjustment, and heating - Comfort-quality seat covers - 2 air horns on roof - 2 amber beacon pre-fittings - As-new condition Lhedpjx Al Trjfx Ahvsd Price NET plus 19% VAT. Attractive financing options available upon request. All details are non-binding. Subject to errors and prior sale. Internal vehicle number: 2475

Condition: used, mileage: 472 km, power: 375 kW (509.86 HP), first registration: 05/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN TGS 33.510 BB 6x4 CH chassis truck with first registration in 05/2025, 33t variant, 6x4 drive, wheelbase 3.30 m, 510 HP, with PTO, air conditioning, refrigerator, tow bar, gross combination weight 59 t, with ATS warranty, and much more. MAN ATS warranty valid until 25.09.2026 Commercial tonnage: 33 tons Permissible gross weight: 26,000 kg 28,000 kg permitted total vertical load, Tech. Plus Medium-high design TN long cab with one sleeper berth and rear wall window Diesel engine with 375 kW (510 HP) output and 2,600 Nm torque, Euro 6 D Drive: 6x4 Wheelbase: 3,300 mm, rear frame overhang 800 mm Differential locks in rear axles Transmission: MAN TipMatic 12.28 OD PTO, gearbox-dependent, type NH/4c, without flange, f=1.14, position approx. 2:30 High-performance engine brake MAN EVBec, adjustable Transmission function MAN EfficientRoll Transmission function rocking mode Transmission for increased thrust share during driving Transmission functionality MAN Idle Speed Driving Drive programs: MAN TipMatic Performance and Efficiency, up to 70,000 kg Drive programs: MAN TipMatic Offroad, up to 70,000 kg Drive program: MAN TipMatic Manoeuvre, shunting mode Creeper function MAN EasyStart Full brake assistant ABS, EBS, ASR, ESP Front and rear axles with leaf suspension Front axle: 9,500 kg, rear axle: 13,000 kg Stabilizer on front and rear axles Axle ratio i=3.63 Tow bar: ROCKINGER type 400 G 150A with pneumatic connections for trailer loads up to 40,000 kg Tech. Plus 59,000 kg permissible gross combination weight Tech. Plus Climatronic Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 LED beacon lights on cab roof LED taillights and daytime running lights 2 LED marker lights and turn signals on the sides Preparation for reversing camera Extendable refrigerator in cab Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operating panel with 2 functions, operable from outside with door open Air-sprung and heated driver comfort seat with lumbar support and shoulder adjustment Comfort seat covers Smartphone integration MAN SoundSystem MAN Media System Advanced Navigation 7 inch New vehicle with MAN ATS warranty Lhsdpfxsx Txwue Ahved Net price plus 19% VAT. Attractive financing offers available on request. All details without guarantee. Subject to errors and prior sale. Internal vehicle number: 2509

Condition: like new (used), Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation *Shower system. * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. Lhodjx S Ipwspfx Ahvsd - Electrical energy in KW: 22kw - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Condition: excellent (used), Bomar Type: Bandsaw CLS 420.420 Lsdpovb Dy Eefx Ahvohd Dimensions: 2654 x 2135 x 1870 LxWxH Power supply: 3x400V,50Hz;TN-C-S 4,5 kw, 16A Belt size: 4670x34x1.1 mm Cutting speed: 20-120 m/min Weight: 950 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.