Used Thrust Ball Bearing for sale (5,580)

Condition: excellent (used), Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, housing washer -Manufacturer: INA, bearing washer for axial cylindrical roller bearings 5 pcs. unused OVP -Type: GS 811 30 .: Carton: with 5 pieces of bearing washers -Quantity: 6x box available -Price/Sale: per carton Ledpfx Ajv R U Eqsbzoag -Dimensions box: 200/200/H50 mm -Weight: 3.8 kg/piece

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Laodpfx Aboyvrvpjzsg Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: used, Year of construction: 2015, Base machine T65C Automatic, 1 unit Lsdoz Alfuopfx Abzoag General technical features: • Weight: 1600-2,200 kg, Martin composite stand • Table size: 860 mm x 1370 mm in gray cast iron; table extension is standard, designed as a lockable tool tray, 335 mm x 625 mm • Table height: 900 mm • Scoring table: Standard length 3000 mm, table length corresponds to cutting length; position-independent locking; guides are hardened, wear-resistant, self-cleaning; table lip is replaceable; design in anodized aluminum • Saw blade spindle: Ø 30 mm for main saw blade, two drive pins 8 mm • Saw blade change: Quick-change system "ProLock" • Saw blade diameter: Ø 250 - 550 mm; can be recessed under the table up to 400 mm; saw blades up to Ø 400 mm can be used with inserted scoring saw blades • Cutting width: 1,100 mm • Saw blade swivel: 0° to +46° • Cutting height: max. 204 mm / saw blade 550 mm / 0°, max. 135 mm / saw blade 550 mm / +45° • Cutting width (main saw): Saw blades with max. 6 mm cutting width at swivel angle 0° to +46°; special tools with max. 20 mm cutting width at swivel angle 0° • Motor power: 5.5 kW (7.5 hp), 3 ~ / 400 V - 50 Hz • Speeds: 2800 / 4000 / 5000 rpm; easy and convenient speed change from the front via the chip guard • Length stop: Design in anodized aluminum with continuous support, fine adjustment for both fence elements; dimension display via a scale with a magnifying glass; length compensation for angled cuts with electronic assistance; cutting length 95 - 2000 mm, extendable up to 3220 mm • Cross table: Design in zinc-coated steel; angled cuts according to the scale without repositioning the stop; integrated fixing positions for 0°, 22.5°, 30° and 45° cuts, one-hand clamping on the scoring table; support dimensions 1340 x 650 mm • Parallel stop: Electromotive positioning of the parallel stop; stop bar in anodized aluminum, foldable; complete integration of the parallel stop into the control system; guided by four grooved ball bearings, floating above the machine table, removable in any position; movement of the stop in the safety area (0 - 200 mm) in hold mode, display resolution: 0.1 mm; repeat accuracy ± 0.05 mm • Extraction: Connection to protective hood Ø 100 mm, machine stand Ø 120 mm; minimum extraction air volume: 23 m³/min at 800 Pa at the main connection 120 mm • Protective hood: Protective hood with 2 blade sets (1x flat for 0° cuts, 1x with a one-sided belly for cuts 0° to 46°); passage dimension between saw blade axis and support column: approx. 900 mm, clearance when the hood is swiveled away between the saw blade and the protective hood arm: approx. 635 mm; releasing the locking from the working position • Standard accessories: 1 scoring shoe on the scoring table, 1 handle for pushing the wood, 1 ProLock combination wrench, 1 return handle, 4 shims (250/350, 350/450, 450/500, 500/550), 1 push stick • Control panel: Control panel at eye level, can be swiveled away • Electrical equipment (according to VDE/EN 60204): Electronic soft start/stop device for the main saw blade; contact for controlling the extraction; motor protection switch and winding protection, emergency stop button; required voltage supply: 3 ~ / 400 V - 50 Hz • Emission values, workplace emission: Noise values according to DIN EN ISO 11202, dust values according to DIN 33893. Please refer to the operating manual for the technical values. Performance features of the T65 control system: Performance features of the 5.7" (145 mm) touch screen control system with color L

Condition: good (used), Year of construction: 2018, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 380 mm, Equipment: documentation/manual, Number of clamps: 6 Cutting length: 3800 mm Max. saw blade overhang: 90 mm Air tables: 4x Features include “post-forming” for a single panel or a stack of laminated panels, a linear motor for moving the saw carriage without any friction or mechanical components, a speed exceeding 200 m/min, and an acceleration of almost “1g”, among many others. Ljdpfx Aoy S Rhcebzjag PRISMA EVO is a cutting center without a motor on the saw carriage (patented), and thanks to this extraordinary innovation, all causes of vibration are definitively eliminated, which improves the quality of the cut surface and ensures a longer blade life. PRISMA EVO uses linear guides with ball bearings for all sliding movements of the saw carriage, the pressure beam, and the side pressure device as standard. The feeder of this model is automatic, electronically controlled, and equipped with a brushless motor. The side aligner is “permanently engaged,” which guarantees a faster cross-cutting cycle for a single strip. The side aligner slides on a linear guide, ensuring smooth and clean movements, and is wear-resistant and virtually maintenance-free.

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 spiral casing pumps in process design 1 of these completely overhauled, ball bearings of the pump and motor new. Mechanical seal overhauled by a specialist company. All seals new. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Lodpfoiuznuex Abzsag Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type, drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Partition wall: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Hardened steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing housing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction nozzle nominal size: DN 80 Discharge nozzle nominal size: DN 40 Nominal pressure suction side: PN 10 Nominal pressure discharge side: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection type: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and transport - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine technology

Condition: refurbished (used), functionality: fully functional, FREWITT MG-803 OSCILLATING SCREENING MILL / GRANULATING MACHINE Completely overhauled in 2026 – Pharmaceutical version – comprehensively documented CONDITION Used Frewitt MG-803 in exceptionally good, fully overhauled condition. As part of a comprehensive mechanical and electrical general overhaul, the machine was completely disassembled, cleaned, technically refurbished, and professionally reassembled in 2026. The entire overhaul is detailed in a 101-page overhaul report with numerous photos, drawings, spare parts lists, and work steps. APPLICATION Oscillating screening and granulating machine for applications, in particular, in the pharmaceutical, chemical, and food industries. Stainless steel version with professionally refurbished product-contact surfaces for high hygienic requirements. COMPLETE OVERHAUL 2026 The following work was carried out as part of the overhaul, among other things: - Complete disassembly of the machine - Overhaul of fixed and moving bearing heads - Refurbishment of the connecting rod drive and guide units - Ultrasonic cleaning and refurbishment of the components - All deep groove ball bearings, cylindrical roller bearings, and linear bearings replaced - All radial shaft seals and Garlock seals replaced - Joint screws newly manufactured from stainless steel 1.4305 - Electric motor and gearbox completely overhauled by a specialist company - New bearings and seals in the drive - Drive components sandblasted and protected with a protective coating - New conductive and lockable swivel casters - Safety device of the machine door overhauled - Complete reassembly and final function test Ljdpfxezu Tu Ij Abzjag PHARMACEUTICAL SURFACE FINISH All product-contact stainless steel surfaces were professionally ground and polished by a specialized company. Surface roughness of product-contact surfaces: Ra ≤ 0.8 µm TECHNICAL DATA Manufacturer: Frewitt Model: MG-803 Year of manufacture: 1997 Machine type: Oscillating screening/granulating machine Version: Pharmaceutical/stainless steel version Installation: mobile Product-contact surfaces: Ra ≤ 0.8 µm Complete overhaul: 2026 SCOPE OF DELIVERY - Frewitt MG-803 - Stainless steel feed hopper - Stainless steel discharge hopper - Rotor - Screening unit / sieve basket with lateral guide rails - Extensive selection of various sieve inserts - Complete drive and connecting rod system - Protective cover and safety sensors - Mobile stainless steel frame with new conductive, lockable rollers FUNCTION TEST After the complete overhaul, the machine was completely assembled and subjected to a function test. The MG-803 runs very smoothly and vibration-free and is ready for immediate use. DOCUMENTATION Extensive documentation available: - Original operating instructions - Technical drawings - Parts lists - Electrical documents - Maintenance and conformity documents - 101-page overhaul report of the complete overhaul in 2026 with extensive photo and work documentation INSPECTION / TEST RUN Inspection and test run possible by appointment. Subject to prior sale and errors.

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 Lodpfx Aszu T Smjbzsag 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine Laedpfst Tqy Ejx Abzsg with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Year of construction: 2021, total length: 3,850 mm, total width: 2,350 mm, total height: 1,560 mm, Weight: 5.500 kg - Year: 2021 - Documentation available: Yes - CE marking present: Yes Lasdpfx Abox R R Tcezsg - CE certificate present: Yes - Serial number: 27869 - Drive system: CNC - Control system brand: Cybelec - Control system type: Cybtouch-8W - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 12.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 20 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Ball-bearing table - Transport dimensions: 3850mm x 2350mm x 1560mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Type: BF 4200 Year of construction: 1998 Type of control: CNC-Steuerung Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Lajdpfx Abezx Nybszjg Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Distance between the grooves: 140 mm Further information: - Heidenhain HR410 handwheel - 3D scanner, infrared - The ball screw on axes Z and Y runs clamped and supported on combined radial/axial roller bearings and radial ball bearings with 250 N/sqm stiffness. The machine can be viewed while powered up.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Ljdpfx Abezt Twyjzeag Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working Ljdpfx Absz A Ictjzjag • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: like new (used), Year of construction: 2022, operating hours: 50 h, EDM 313MF30-SLM, Year of manufacture 2008/2023 Technical data: Adjustment travel XxYxZ 620x420x400mm workpiece clamping table 1000x600mm tank size 1070x670mm Filling height of the working tank 400mm distance table-electrode holder 150/550mm Workpiece weight max.1500 kg Dielectric min. 1200 L dimensions 2550x2430x2500mm Weight of the machine 3900 kg Lsdpjmx Slhjfx Abzjag Equipment: - color: aluminum metallic (silver) - new electrical cabinet - lifting speed (highjump) 15m/min. - contact protection new - cooling unit Termogamma TG13/14 - linear scale in all axes - C-axis 100rpm, direct measurement 0,0001 Holding brake - chuck EROWA ITS/Hirschmann/3R - Cartridge filter system - User interface MF30 V.3.0 - Exopuls+ 60A Rev. 4 - New ball screw, bearings, couplings - Screen Automation Touch Panel - Hand control panel with enable button - Pumps, filling - filter - and spraying pump - New maintenance unit with digital pressure switch - New valve terminal - Table revised (steel) - WZW 6-fold, option 20/30-fold - Co2 extinguishing system - Warranty 12 months - Transport - IB on site - Training

Condition: excellent (used), Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer, axial needle roller cage, cylindrical roller cage -Manufacturer: INA, Axial cylindrical roller bearings, axial needle roller bearings, 5 pcs., unused, original packaging -Type: AXK 150190 A -Outer diameter: 190 mm -Inner diameter: 150 mm -Dimensions: Ø 190 x 5 mm -Price per pack of 5 pieces: 200 euros -Stock: 4 package units and 2 individual items -Weight: 0.2 kg/piece Lsdpfxjv Sprne Abzeag

Condition: good (used), Year of construction: 1994, functionality: fully functional, Format circular saw Altendorf F 45 Year of manufacture: 1994 S/N 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine type: Format circular saw Version: Without scorer Technical Data Aluminum sliding table 3000 mm Main saw blade diameter: max. 450 mm (recommended: 300–350 mm for standard work) Cutting height at 90°: up to approx. 150 mm (dependent on saw blade diameter) Cutting length (sliding table): depending on version, typically 3000 mm Cutting width at rip fence: approx. 1000 mm Main saw speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Main saw motor power: approx. 4 kW (optionally up to 5.5 kW) Saw blade tilting: 0–45° (manually adjustable) Height adjustment: manual via handwheel Equipment Massive, ball-bearing aluminum sliding carriage (precision-guided) Crosscut fence with adjustable angle stop and flip stops Robust rip fence with fine adjustment and digital display Table extension (depending on configuration) Mechanical height protection / saw blade guard Features No scorer: The machine is especially suitable for solid wood and rough cutting of panel materials. Solid industrial quality – durable solid mechanics, easy maintenance Cast iron machine table for high smoothness and precision Laedpswrfmaefx Abzsg EXTRA: Altendorf Digit X readout unit at the rip fence Weight 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Condition: excellent (used), Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings Laedpfx Abozbrltjzog -Manufacturer: NSK, cylindrical roller bearing inner ring unused -Type: NNU4960 03DR -Outer diameter: 335 mm -Inner diameter: 300 mm -Width: 120 mm -Quantity: 2x inner ring available Price: per piece -Dimensions: Ø 335 x 120 mm -Weight: 16.2 kg/pc.

Condition: good (used), Year of construction: 2002, functionality: fully functional, punching force: 20 t, TECHNICAL DETAILS Machine capacity: 200 kN (20 t) Air pressure: 5 bar Air flow rate: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travelling ranges: Machine travel range without repositioning: 1,250 mm x 2,100 mm Processing Max. sheet thickness with ball bearing table: 6 mm Max. sheet thickness with brush table: 3 mm Max. weight per table: 100 kg Accuracy Punching accuracy (in standard mode): ±0.1 mm Ljdpoy Symuefx Abzoag Positioning accuracy (repeatability): ±0.07 mm Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling cycle, feed 1 mm: X920 / Y920 Tools Minimum programmable step: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: good (used), functionality: fully functional, Technical specifications: Manufacturer: Striebig Type: Standard II Plus 6220A Year of manufacture: 5.92 Feed: manual Design: automatically adjustable aluminum slatted frame Saw carriage lock: manual Lodswdig Ispfx Abzoag Saw unit plunge-cut: manual Swivel adjustment from 0 to 90°: manual Motor power: 4.4 kW Cutting area: 5600 × 2200 × 80 mm Speed: 4750 rpm Saw blade diameter: 300 mm Space required: L × H × W 6400 × 2900 × 1600 Condition: good (all ball bearings new, red plastic strips new) Location: Warehouse Installation: Wall-mounted, freestanding A forklift is available for loading. Installation and delivery available upon request.

Condition: not inspected (used), functionality: unexamined, workpiece height (max.): 160 mm, workpiece width (max.): 230 mm, Working width: 20 – 230 mm Working height: 8 – 160 mm 7-spindle configuration Feed rate infinitely adjustable: 6 – 36 m/min Ljdpezt Hf Djfx Abzjag Spindle motors with 7.5 kW, 11 kW and 18.5 kW power Mechanical brakes on the motors Electrical adjustment options for spindles and feed rate Hardened table insert in front of the first lower spindle Pressure pads and guides for precise workpiece guidance High-quality ball bearings and robust industrial design Spindle arrangement: Lower horizontal spindle 7.5 kW Right vertical spindle 7.5 kW Left vertical spindle 11 kW Right vertical spindle 7.5 kW Upper horizontal spindle 18.5 kW Lower horizontal spindle 7.5 kW Universal spindle 7.5 kW

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • 2 units available, identical machine • Machine design: 60° slant bed • Guideways: Roller guideways • Max turning diameter: 250 mm • Max turning diameter (standard): 120 mm • Max turning length: 900 mm • X1 travel (upper slide): 300 mm • Z1 travel (upper slide): 650 mm • Y1 travel (optional): ±40 mm • X2 travel (lower slide): 180 mm • Z2 travel (lower slide): 650 mm • X3 travel (counter spindle): 175 mm • Z3 travel (counter spindle): 670 mm • Main spindle chuck size: 175 / 200 mm • Maximum rod diameter (without reducing tubes): 62 / 65 mm • Spindle bore diameter: 79 mm • Spindle nose diameter: 170 mm • Collet diameter: 66 mm • Front bearing diameter: 120 mm • Main spindle power (40/100% ED): 35 / 25 kW • Main spindle speed range: up to 5000 rpm • Main spindle torque (40/100% ED): 370 / 270 Nm • Spindle drive type: AC motor with integrated spindle motor • C-axis: Integrated for oriented stopping and contouring • C-axis speed: 2000 rpm • C-axis holding torque: 270 Nm • Counter spindle power (40/100% ED): 26 / 21 kW • Counter spindle speed range: up to 5000 rpm • Counter spindle torque (40/100% ED): 290 / 230 Nm • C-axis (counter spindle) speed: 2000 rpm • C-axis (counter spindle) holding torque: 230 Nm • Rapid traverse X/Z (slide 1): 30 / 30 m/min • Feed force X/Z (slide 1): 4.0 / 7.0 kN • Positioning resolution X/Z: 0.0005 mm • Motor torque X/Z: 6 / 10.5 Nm • Motor speed X/Z: 3000 rpm • Ball screw pitch X/Z: 20x32 / 20x40 mm • Rapid traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min • Feed force X/Y/Z: 4.0 / 4.0 / 7.0 kN • Positioning resolution X/Y/Z: 0.0005 mm • Motor torque X/Y/Z: 6 / 6 / 10.5 Nm • Motor speed X/Y/Z: 3000 rpm • Ball screw pitch X/Y/Z: 20x32 / 10x32 / 20x40 mm • Rapid traverse X/Z (slide 2): 30 / 30 m/min • Feed force X/Z (slide 2): 4.0 / 7.0 kN • Positioning resolution X/Z (slide 2): 0.0005 mm • Motor torque X/Z (slide 2): 6 / 10.5 Nm • Motor speed X/Z (slide 2): 3000 rpm • Ball screw pitch X/Z (slide 2): 20x32 / 20x40 mm • Rapid traverse X/Z (counter spindle slide): 15 / 30 m/min • Feed force X/Z (counter spindle slide): 4.0 / 7.0 kN • Positioning resolution X/Z (counter spindle): 0.0005 mm Lsdpfx Abjyvz Ibszjag • Motor torque X/Z (counter spindle): 10.5 / 10.5 Nm • Motor speed X/Z (counter spindle): 3000 rpm • Ball screw pitch X/Z (counter spindle): 10x32 / 20x40 mm • Number of tool stations: 12 • Tool holder: VDI 30 • Tool changer type: Turret • Tool shank size (DIN 69880): 30 / 40 mm • Number of driven tool stations: 12 • Driven tools: all 12 stations capable of driven tools • Driven tool power (40/100% ED): 11.7 / 8.4 kW • Driven tool torque (40/100% ED): 28 / 20 Nm • Driven tool speed: up to 4000 rpm • Tailstock stroke (optional): 300 mm • Tailstock force: 150 / 630 daN • Center size: MK 4 • Hydraulic tank capacity: 20 l • Hydraulic pump power: 2.2 kW • Hydraulic pressure max: 90 bar • Clamping pressure main spindle: 80 bar • Clamping pressure counter spindle: 70 bar

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Laedpfew D E A Eex Abzeg

Condition: used, This listing is for the Hund Wetzlar H600/12 Microscope The unit is in full working condition and is ready for immediate use The Hund Wetzlar H‑600 series is a line of high-quality laboratory upright compound microscopes manufactured by Helmut Hund GmbH, a German optical instrument maker that later absorbed the traditions of Will Wetzlar—a well-respected older Wetzlar-based manufacturer Laedpfxjxhfdzo Abzeg These microscopes are tailored for laboratory, educational, clinical, and research use. They are known for their robust mechanical build, ergonomic design, and optical clarity—making them reliable and long-lasting instruments Key Features Across H‑600 Variants Here’s a breakdown of typical configurations and options in the H‑600 series: Feature Description Stand & Mechanics Solid cast‑iron tripod, coaxial coarse/fine focusing (fine ~2 µm), 160 × 130 mm mechanical stage, 5‑position ball‑bearing nosepiece . Optics & Contrast Methods Supports brightfield, darkfield, phase contrast, and select models include incident fluorescence illumination Tube & Eyepieces Binocular tube, typically 30° viewing angle, with wide-field eyepieces (e.g., 10×/18 or 10×/20) Objectives Plan or achromatic objectives: 10×, 20×, 40× phase, and 100× oil immersion (numerical apertures e.g., 0.65, 1.25) Illumination Integrated 12 V / 30 W halogen lamp with continuous brightness control; some models also include HBO fluorescence or LED options Accessories Often include centering keys, filter sliders, spare bulbs/fuses, dust covers, and optional filters or conversion accessories .

Year of construction: 2020, condition: ready for operation (used), This 5-axis TGT V2 Maxima was manufactured in 2020 and is in mint condition. It features an ELBARON grinding mist extraction system and includes collets for diameters up to 20 mm. Extras include robot pallets, spare spindle, and sanding wheel packs. Consider the opportunity to buy this TGT V2 Maxima. Contact us for more information. Additional equipment • ELBARON grinding mist extraction system / Robot pallets / Collets for all common diameters up to 20 mm / Spare spindle / Sanding wheel packs and associated sanding wheels (Approx. 25 pieces) Machine Benefits Technical Machine Benefits • Operating time: 42000 minutes • Machine in mint condition / original spare spindle available, eliminating waiting times for spindle maintenance / full description and installation manual included Extra Information Spindle bearing: Front/rear: 7010 CTYN DU L P4 (NACHI)/ Lubricating grease: Kluberisoflex Super LDS 18 or NBU 25 (2.75 cc per bearing)/ Tightening torque: 58 Nm (front/rear)/ Concentricity: ≤ 0.002 mm/ Motor: LENZE 7.5 kW (10 hp), 4-pole/ Speed: 0-4500 rpm (frequency converter)/ Belt: PJ-12-1143L (GATES/FENNER)/ 2 Feed drive unit - X- and Z-axis/ Stroke: X-axis: 300 mm/ Z-axis: 680 mm/ Ball screw: Type: Fixed - Supported/ Lodex D Hi Ropfx Abzjag Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm tightening torque)/ Ball screw spindle: BIF 3210A-5 (THK, Ø32 mm, pitch 10 mm)/ Motor: BECKHOFF AM8053-0G20 (11.4 Nm)/ Clutch: SFC 050 DA2-24B-20B (MIKI PULLEY)/ 3 Feed drive unit - Y-axis Stroke: 300 mm/ Ball screw: Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm)/ Ball nut specification: BIF 3210-5 (THK)/ Motor: BECKHOFF AM8061-0GB1 (12.8 Nm)/ Coupling: SFC 060 DA2-20B-32B (MIKI PULLEY)/ / Rotatable table - axis A/ Bearing: 7014 CTYN DUL P4 (NACHI)/ Tightening torque: 255 Nm (front), 62 Nm (rear)/ Radial runout: ≤ 0.002 mm/ Grease: Kluberisoflex Super LDS 18 (3.6 cc per bearing)/ 5th Rotary Table Assembly - C Axis/ Bearing: YRT 100 (GOLDBULL)/ Assembly torque: 14 Nm (3-stage: 40% → 70% → 100%)/ Motor: ORION_230/140 (NIMBLE/UCAM), 238 Nm/ Encoder: RENISHAW/ main coolant system/ Flow rate: 85 L/min/ Tank volume: 400 liters/ Pump: RKM206 (Rajamane, 1.5 kW, 6-stage)/ Filtration: Paper filter Para mol N 334/150 (0.01 mm)/ lubrication layout/ Oil pump: ELU-2700 (Cenlub, 3 liters, 415V AC)/ Metering Cartridge: 320410-3 (LUBE)/ steady rest (manual)/ Vertical stroke: 3 mm/ Diameter range: Ø3-Ø22 mm/ Carriage travel: 120 mm

Condition: used, Year of construction: 1968, roll diameter 500 mm throat 1050 / 485 mm workpiece height 300 mm saw band length 3920 - 4050 mm cutting speed 15 - 940 m/min table height 1040 mm table surface area 750 x 800 mm Table tiltable 15 Grad total power requirement 4,0 kW weight of the machine ca. 1750 kg dimensions of the machine ca. 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings Laedpfx Abeiqp Erezog - Additional table 450 x 450 - Machine light

Condition: excellent (used), Year of construction: 2017, cutting diameter 350 mm saw band length 4780 x 34 x 1.1 mm capacity 90 degrees: flat 500 x 340 mm capacity 45 degrees: round + 350 mm capacity 45 degrees: flat + 380 x 340 mm capacity 60 degrees: round 230 mm capacity 60 degrees: flat 220 x 340 mm capacity 45 degrees: round - 350 mm Lsdpfszqgf Sox Abzoag capacity 45 degrees: flat - 220 x 340 mm coolant capacity ca. 100 l band speed 20 - 100 m/min Control SIEMENS voltage 3x 400 V total power requirement 3.0 kW AC weight 2150 kg range L-W-H 3030 x 3150 x 2000 mm In very good condition Demo machine from the manufacturer PEGAS With a wide range of special features Original price about 60.000 euros Special price upon request - in checked conditions - machinevideo - ?v=dv_wXIT9BaQ Features: - Robust, highly efficient electro-hydraulic miter band saw * Fully automatic (INDUSTRIAL) = with automatic material feed * Model: Two-column band saw * Maximum stability and vibration damping during cutting * Powerful saw band drive with a 3.0 kW motor - Material feed unit with ball screws * "Longstep feed gripper" for a maximum feed length of 1.000 mm - Includes SIEMENS PLC control unit * Selectable semi-automatic or fully automatic cycle * 200 programs, each with 99 programmable cut lengths and quantities * When the remaining length is 500 mm, the machine interrupts the sawing cycle * Protection against damage or jamming of the material - For angles from 0° to 60°, with a ball-bearing rotary table * Programmable CNC adjustment of the miter angle * Right (0° to 60°) and left (0° to 45°) * Stepless adjustment of the miter angle * Adjustment via a robust gear train - Saw blade guides made of carbide plates - Saw feed infinitely adjustable via a fine-adjustment knob - Sturdy machine bed and torsion-resistant saw frame - Infinitely variable speed adjustment of the saw blade - Coolant system - Operating instructions for the machine and control system