Used Thermoform for sale (192)

Year of construction: 1996, condition: excellent (used), Thermoformer Brand Multivac Model R 530 Machine number: 837 Year of construction: 1996 Iodpfx Aewa D A Aefisih Power 15 kW Voltage 415 V, 3 Ph, 50 Hz, 35 A Film width: 620 mm Form: (3x) 180 mm x 160 mm Labeler Brand MR Etikettiertechnik GmbH Model MR293 Machine number: 23646/05 Year of construction: 2004 Overall dimensions: 8800 mm x 1400 mm x 1960 mm Including suction device for resting film Dimensions: 600 mm x 500 mm x 1060 mm Without main vacuum pump, vacuum was regulated centrally, labeler is incomplete.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,600 mm, total length: 3,100 mm, total height: 1,600 mm, overall weight: 750 kg, type of input current: three-phase, input current: 12 A, pressing force: 9 t, input frequency: 50 Hz, operating temperature: 200 °C, input voltage: 400 V, The machine is designed for vacuum forming of various elements of thermoplastic plates such as: PP, PET, PS, HIPS, EPS, PLA, PVC, PMMA, KYDEX. Technical dat Working area dimension: 800×600 mm The dimension of the plate sheet: 860×660 mm Working table stroke: 290mm Thermoformed board thickness: 0,2 to 2 mm only the upper inrun heating Thermoformed board thickness: 3 to 5 mm additionaly lower inrun heating Power supply for the electric installation: 400V Heating power: *Upper inrun heating -12 kW *Lower inrun heating - 12 kW *Lower heating heating to maintain the temperature of the template - 2.4 kW Vacuum pump performance: 40 m3 oil Pressure in the chamber: ok.0,95-0,98 kg/cm2 Dimensions: width x depth x height: 1500 x 1600 x 1800 mm Weight: 600 kg Optionally, the machine can be configured according to the customer’s wishes: -increasing the dimensions of the working area, -demonstrative temperature measurement of the dome and material, -pneumatic clamp of frame -material cooling, -mobile control panel, -adaptation to work with a roll of foil, -reduction frame narrowing the working area. Iisdpfxsiimw Aj Afijh We produce vacuum machines. Chceck our vebsite for more. We ship worldwide.

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1506, film width: 1,000 mm, type of input current: three-phase, pressure: 6 bar, total width: 700 mm, total length: 1,000 mm, total height: 350 mm, input voltage: 400 V, sheet thickness (max.): 10 mm, heating capacity: 30 kW (40.79 HP), overall weight: 1,500 kg, tool height: 490 mm, Machine type: ILLIG UA 100 G Machine number: 1506 Manufacturing year: 1988 Iiedpjwfdd Djfx Afieh Total weight: approx. 1,5 tonns Power supply: 3x400V Total power consumption: 35 kWh Total (lower and top) heating: 30 kWh Type of the heating plate: ceramic Sheet size max.: 1000x700 mm Sheet size min.: 310x210 mm Sheet thikness max.(manual loading): 12 mm Forming area max: 960x660 mm Forming area min: 270x170 mm Height of formed part positive: 350 mm Height of formed part negative: 350 mm Max. tool height: 490 mm Around 2020, the machine underwent a refurbishment. It received a new Omron control system to replace the original Schleicher, and we also refurbished the cabling and electrical cabinet.

Condition: ready for operation (used), Spare parts package for Kiefel KMD 85 consists of electronics, gears and motors see photos. Chain transport is not included in the pictures. Iijdeq Evmcepfx Afioh

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, total width: 17,500 mm, total length: 68,000 mm, total height: 19,000 mm, overall weight: 5,500 kg, Universal and highly successful blister machine in the medium to high-speed category with intermittent platen sealing. Format range: max. forming film width: 300 mm max. web indexing ET: 280 mm max. web indexing MT: 97 mm max. punching width: 284 mm max. drawing depth: 10 mm for PVC / Materials: Forming PVC/PVDC/ACLAR Included in the price are the following configurations of the machine: - Numatic valves - Forming film unwind stand - Forming film buffer - Stock monitoring for forming material - Forming foil unwind - forming station for PVC foil - Splice detection for forming film - Heat monitoring control for heating and sealing stations - Parts for heat fume extraction without exhaust unit - Forming station without plug assist - ET Index station after forming - Fill Section with rotary brush and safety flap - Electrical preparation for SimTap 2i feeding system - Fill control inspection system VisioChrom-CV - Lid foil unwind - Stock monitoring for lidding material - Print registration via elongation (stretching device) of lid material. - Splice detection for lidding material with 2 sensors for inside and outside - Sealing station Iiodpsr Nv Icefx Afish - Cooling station after sealing - Index after sealing - Embossing station -MT index station - Punch station - cross blister outfeed Output: max. 600 blisters Index: max.280x284 mm Forming depth: max.10 mm

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: DHD/250/100, die cushion stroke: 200 mm, total height: 4,500 mm, table width: 1,200 mm, table length: 1,000 mm, installation height: 900 mm, pressing force: 250 t, total length: 2,000 mm, total width: 2,700 mm, control cabinet height: 1,800 mm, control cabinet length: 800 mm, control cabinet width: 500 mm, die cushion force: 100 t, operating speed: 170 mm/s, reverse speed: 250 mm/s, input voltage: 400 V, stroke length: 600 mm, pressure: 235 bar, electrical fuse: 63 A, ram plate width: 1,200 mm, ram plate length: 1,000 mm, Euroblech 2024 trade fair machine - Hamburg location. Iedpfx Afjttriaeieih

Year of construction: 2018, condition: used, Multivac R270CD with skin pack and MAP pack. Iiedpfsuk Sp Njx Afieh Overhauled in 2018, this machine came out of production week 37 2024. Machine comes with several moulds, spares and with 3 vacuum pumps incl. - Booster pump - Busch R5 360m3/h - Busch R5 100m3/h Only 668 production hours, everything build in. Good to go for production. Dimensions from all the tooling is in the photo album

Year of construction: 1999, condition: reconditioned (used), functionality: fully functional, A used and overhauled blister machine, model UPS1030 ET (94/125) Technical data - Format range Feed width maximum 142 x 255 mm Form depth maximum 10 mm - Output at least 15 cycles/minute - Output maximum 70 cycles/minute PVC - Output maximum 50 cycles/minute ALU Includes: - Form film roll carrier with two tension shafts, for maximum roll diameter 800mm, electromechanically foldable, including cutting and gluing table, painted neutral grey - Continuous conveyance of the form material with a contactless loop - Contact heating with 6 individually controlled heating zones (3 zones per plate) - Forming station prepared for PVC or aluminum form film with 4-column guide system - electr. Preparation for pore and crack detection (Visio-Scan) - Clamping pliers for securing the forming film in the forming station when the machine stops - Servo-controlled feed after the forming station, film shrinkage compensation guaranteed - Contact cooling with servo-controlled feed - Cooling water connection for upper and lower forming tool and lower sealing tool - Deflection with compensation pendulum - Filling section, approx. 1900mm with slanted brush and safety flap - Electrical preparation SimTap 2.i and brush feed - Sealing station for plate sealing and toggle lever drive, with 4 column guide (reinforced version with tuning domes) - Overload protection in the sealing station - Upper sealing plate automatically retracts when the machine stops - Cover film holder mounted on the back of the machine with 2 pneumatic tension shafts core diameter 76mm - Deflection shoulder for cover film with pressure presence control - Stretching station for cover film with touch probe controlled Stretching (print mark on the fly) - Contact cooling station after the sealing station - Feed before the punching station - Embossing station - Perforating station - Punching station, adjustable, including blister lowering - Waste cutter with integrated feed for immediate cutting from the waste grid - Compressed air monitoring - Sliding door panel, protective doors electrically switched for emergency stop when actuated 2-channel, made of plexiglass, hinged hood in the transfer area - Switch cabinet hinged on the back of the machine Mains 400/230 volts, 3/N/PE 50 Hz with neutral conductor and separate earthing. The stations were completely overhauled and the discontinued parts were replaced at the time of the overhaul. - Schneider PacDrive3 system with Pac2Touch - Machine paintwork RAL 9007 - Linear translator with: o Lowering unit in the punching station o Good blister outlet below the punch with slide rails o Individual vacuum translator o Individual ejection with ejection counter control o Collection belt with separate drive o Transfer belt o Good blister clearer when the following machine is at a standstill Iisdpfx Asr Ii R Ujfioh - CE conformity with declaration of conformity - Two sets of operating manuals

Condition: good (used), Year of construction: 2007, operating hours: 27,500 h, functionality: fully functional, machine/vehicle number: 069/530, Uhlmann blister packaging system UPS 4 ETX for processing PVC forming films and aluminum cover films Basic machine in modular technology and balcony design, with 12 modules: - Forming film holder with 2 pneumatic tension shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for forming film - Forming film unwinding, timed - 3-zone contact heating: - 6 heating circuits, individually adjustable - simultaneous heating of min. 3 feeds - Heating plates open automatically when machine stops - Forming station with 4-column lifting table guide - Clamping pliers for securing the film strip when machine stops - Filling section with safety flap, length 1,360 mm - Covering film unwinding on operator side with pneumatic tension shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns Lifting table guide: - integrated overload protection - automatic lifting of the upper sealing tool when the machine stops - Cooling station - Free module for installing an additional station Ijdevn R Ehopfx Afioih - Clamping pliers feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punch grid - Monitoring of the compressed air supply with machine stop if the minimum value is not reached - Machine cover - Electromechanically locked protective doors on the operating side made of acrylic glass with individual identification for open doors/ hoods and display in the operating panel - Protective covers made of corrosion-resistant material - Fast format change thanks to: - Plug-in format parts - Plug-in connections for cooling water supply

Year of construction: 2025, condition: new, Vacuum membrane press VPR-3500 is a universal Press for the wood processing and thermoforming. The VPR-3500 press is also adjustable and mobile. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components Vakkumsystem: work surface with vacuum channels for a uniform Unterdruckauch for large workpieces. Becker Vakkumpumpe / oil free / tank capacity 100 l Work surface: 3500x1500mm Pump output: KW 0.75 Vacuum pump flow rate: 40 m3/h Rubber membrane Dimensions exterior: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Off the shelf 54634 Bitburg -free load- Isdpfjd Ecc Tex Afisih

Condition: excellent (used), Clint water chiller, which was cooling tooling for a Multivac thermoformer. Almost new condition. Isdpfx Afeumay Uoijih

Condition: as good as new (ex-display), machine/vehicle number: 1966190, Heating table HT3110 For tempering thermoplastic materials such as mineral plastics, acrylics, etc. to the required processing temperatures. Iodpj T Sv Ssfx Afisih Torsion-resistant base frame consisting of welded steel profiles. Movable on four rollers. Upper folding frame at the rear side rotatably mounted in a solid spherical bearing. Two aluminium heating plates black anodized maximum operating temperature 180 C. Temperature control by means of electronic controller in separate switch cabinet in the base of the table. The swivel movement is actuated by pneumatic cylinders located on the side. Four adjusting screws on the side for setting the material thickness.

Condition: excellent (used), Complete slicing & packing line from CFS & Variovac consisting of 1x CFS Uni slicer whit scale and outfield conveyor, 1x Variovac Primus thermoformer whit 2x tools No 1. 1:2 277 x 177 mm Maximum deep 110 mm made for Swedish Wallet packets. No 2. 1:3 202 x 111 mm Maximum deep 110 mm. The line is fully complete and there is a knife sharpener including for the slicer. Iijdpfoxl Tzijx Afish Convenience Food Systems automatic slicer line, consisting of: type: UNI-SLICER, number: 450.2251, year of construction: 2004, plastic belt, belt width: 230 mm, clearance: 260 mm x 140 mm, diameter knife: 420 mm, slicer dimensions: 2550 mm x 880 mm x 2170 mm. Dividing belt, wire belt, belt width: 270 mm, dimensions: 850 mm x 610 mm x 1110 mm. Check weigher, type: CW2000MK3 091.1992, year of construction: 2004, plastic belt, belt width: 275 mm, dimensions: 700 mm x 780 mm x 1100 mm. Outfeed belt, type: ATB 791 991.1994, plastic belt, belt width: 400 mm, dimensions: 3030 mm x 900 mm x 1260 mm. Knife sharpener,

Condition: reconditioned (used), functionality: fully functional, Technical data: • 4-station rotary table • Max. sealing area 350 x 250 • Max. blister depth 70 – 100 mm depending on product type • Sealing force 12,800 N • Sealing heater power 1.75 kW Ijdpfx Aofua Dcefioih • Carton feeder • Package ejector • Carton forming unit • Cable with CEE 16A plug • Weight approx. 750 kg Machine available in all variants b, b-2, b-3, b-4.

Year of construction: 2001, condition: ready for operation (used), HEK GmbH VGO 200 S Heating cabinet Iisdpeg Hzqbofx Afijh Dimensions (approx.): Width: 1035 mm Depth: 800 mm + 210 mm tube Height: 820

Year of construction: 2025, condition: as good as new (ex-display), Vacuum membrane press VPR-3500 is a universal Press for the wood processing and thermoforming. The VPR-3500 press is also adjustable and mobile. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components Vakkumsystem: work surface with vacuum channels for a uniform Unterdruckauch for large workpieces. Becker Vakkumpumpe / oil free / tank capacity 100 l Work surface: 3500x1500mm Pump output: KW 0.75 Vacuum pump flow rate: 40 m3/h Iedpfxodvldae Afieih Rubber membrane Dimensions exterior: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Off the shelf 54634 Bitburg -free load-

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, Isdpfexiv E Ejx Afioih - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, Tria Model: 70 kW Condition: ready for operation (used) RIA S.p.A. Ideal for medium-to-high throughput applications. Designed for efficient inline or standalone size reduction of sheet, cups, profiles, and other plastic waste. Iodpfx Afewnx H Soijih Construction: Built-heavy-duty, suitable for inline integration under thermoformers or as standalone units.

Year of construction: 1900, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2065/109, Multivac vacuum thermoformer with additional tools Iisdpexg Hy Isfx Afioh

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs Isdofg E H Sspfx Afijih * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C The machine is incomplete and not operational! Isdpfx Ajuk Dwfsfijih For spare parts only!!

Condition: excellent (used), Year of construction: 2017, Curing oven for inserting drying racks, 12-month warranty - For solvent-based substances according to DIN EN 1539 - Max. temperature 180°C - External dimensions (WxDxH): 2520 x 1870 x 2300 mm - Usable space (WxDxH): 1700 x 1350 x 1660 mm - Suitable for the evaporation of small quantities of solvents, approved for paints and solvents up to hazard class A II in accordance with DIN EN 1539 - Max. permissible solvent quantity: 110 g per batch - Equipped with monitoring for minimum exhaust air volume and heating system - Connection: 400V / 50Hz / 21kW - Weight: 1,100 kg - Documentation included Suitable e.g. for vacuum thermoforming of plastics, fixing and drying of textile dyes, flock adhesives, as well as baking enamel and aluminum signs. Fans extract air from the drying chamber, guide it through thermostat-controlled heating elements, and reintroduce temperature-conditioned air into the chamber. Exhaust and supply air fans remove solvents released during the drying process, while simultaneously introducing fresh air into the chamber. Uniform temperature distribution is achieved via horizontal airflow in the drying chamber. Required temperature is easily adjustable via actual and target value thermostat. A safety thermostat acts as overheating protection. Isdpfxsxfvfks Afieih Inspection possible by appointment in our warehouse. Oven, ovens, drying oven, kiln, heating oven, heated cabinet, industrial oven, solvent oven, annealing oven, preheating oven, tempering oven, drying cabinet, chamber oven, circulating air drying cabinet, circulating air oven, paint dryer

Year of construction: 2012, operating hours: 75 h, condition: like new (used), This Vötsch Hephaistos Industrial Microwave Chamber has had extremely low hours usage during its life so far, on 75 hours .. having been installed and minimally utilized from time to time for a single research project at the University of Sheffield AMRC research department known as the “Factory of the Future”. Sold new for a price of approx 250,000.00Euro. Contact us now for an exceptional offer for this high tech unit in as new condition. VHM Hephaistos Industrial Microwave Chamber For Aerospace and Automotive Engineering The Research Project The VHM Hephaistos Industrial Microwave Chamber for component testing was developed in cooperation with the Karlsruhe Institute of Technology (KIT). It is the result of a joint development project sponsored by the German Federal Ministry of Education and Research (BMBF). Alongside KIT, the Composite Research Center of EADS in Munich, the Institute for Aircraft Design (IFB) at the University of Stuttgart, GNK Aerospace in Munich and Vötsch Industrietechnik were involved in the project. Microwave system Iiedjtvz Rfjpfx Afish The VHM Hephaistos Industrial Microwave Chamber from Vötschtechnik is an internationally patented system. Fast and energy-efficient production processes are possible by using microwaves. The microwave chamber is characterized by its hexagonal geometry with a very high field homogeneity. This is a major advantage when thermoforming fibre composites (CFRPs) in the aerospace and automotive industries. During the targeted volumetric heating of the products, the microwaves directly enter the material so that energy is delivered directly and the chamber does not require heating. This increases the heating rate and throughput, saving energy and time in addition. Reduced production costs This industrial microwave chamber guarantees you reduced costs due to shorter heating, process and cooling times required for curing CFRP components. Its material processing technology means the microwave can produce energy input into the component to be heated while the oven itself remains cold. In comparison to the process in autoclaves, the processing times are reduced by up to 50 %. Energy consumptions is reduced by up to 70%. Advantages: Possibility to use metal parts, such as conventional metal tools and feed systems, in the microwave field High degree of product quality thanks to the maximum homogeneity of the microwave fields provided by the hexagonal chamber structure. By using microwave absorbing materials, additional positive effects can be achieved Sizes from laboratory scale to large systems, e.g. as are required in the aerospace industry, can be achieved The modular design allows a flexible adjustment to your product Volumetric and selective heating for energy-efficient processes Precise heating of the products Hybrid systems, e.g. in combination with hot air

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Isdpfsq A Um Rox Afieih Control cabinet: included

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. Iiedjfg E H Ujpfx Afieh The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.