Hydrophobic coating system / PVD coating

COTEC HCS 100 P-UH Beschichtungs

Year of construction: 1988, condition: good (used), hydraulic clamp vertical adapters for parting line molding capability clamp tonnage 40 ton Platen size 346 x 346 mm Kedpfx Aebqi Tbehvedi Distance between tie bars: 220 x 220 mm Maximum open daylight: 475 mm Mold opening stroke: 275 mm Minimum mold height: 200 mm Hydraulic ejector force: 2 ton Hydraulic ejector stroke: 100 mm Screw diameter: 22 mm Shot size: 30 gram Optional screw-shot sizes: up to 30 mm Screw stroke: 95 mm Screw volume: 36 cm³ Maximum injection pressure: 91 kN (18,200 psi) Screw speed range: 10-580 rpm (infinitely variable) Hydraulic oil required: 190 liters (50 gallons) Dry cycles: 2520 per hour Pump Motor: 11kW (15HP) Overall length x width: 3.3 x 1.1m Height w/inj unit vertical: 2.8 m Weight without oil: 1700 kgs

Condition: used, machine/vehicle number: 478, pression: 36 t max. mounting height: 135 mm Kdjdpfjbb Tguex Ahvoi electrical connection: 380 V, 7,5 kW space needed: 1700 x 700 x 2150 mm weight: 1800 kg

Condition: good (used), Multi-purpose hoist, grab hoist -Load capacity: max. 1200 kg -for: rope Ø 10 mm -Quantity: 1 piece available -Dimensions: 640/150/H370 mm -Weight: 18 kg Kjdpfxodvnb Hj Ahvodi

Condition: used, Pallet rack, heavy-duty rack, high rack, plug-in rack, storage rack stand - Depth: 500mm -Height: 2500mm -Quantity: 3x stand -Price: complete -Only stands, no crossbeams -Weight: 50kg Kdedpfx Aheb A R Spovoi

Condition: good (used), Press force: approx. 6 tons Table size: 400 x 300 mm (W x D) Table opening: Ø 133 mm Ram size: Ø 70 mm Thrust: 178 mm Installation height: 240 mm (top stroke) Stroke: 1-100 mm Weight: approx. 480 kg Drive power: 2.2 kW Other features • Hydraulically driven Kedpsvxvtxjfx Ahvjdi • Continuously adjustable stroke rate • With protective screen for inserting work with secure tools • With height-adjustable mounting bracket (feed optional)

Year of construction: 1993, condition: ready for operation (used), A Durmazlar press brake distributed by Knuth is available. Pressing force: 35t, bending length: 1350mm, motor power: 5.5kW, stroke: 100mm, stroke rate: 17/min, max. operating pressure: 240bar, oil capacity: 150l. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2100mm, weight: approx. 1750kg, operating hours: 1258h. An on-site inspection is possible. Kdjdexguc Rjpfx Ahvji

Condition: used, Year of construction: 2007, x-axis 500 mm y-axis 450 mm z-axis 400 mm b-axis -5 / +100 ° c-axis ° Control SIN 840 D spindle turning speed range 10000 U/min tool taper DIN 69893 HSK-A63 number of tools in the magazine 16 surface area Ø630 x 500 mm table load capacity 200 Kg total power requirement 38 KVA machine weight ab. 4500 kg dimensions of the machine ca. 5 x 5,5 x 2,5 m Renishaw NC4 tool measurement Renishaw probe preparation OMP40 infrared probe not available electric handwheel Spindle oil cooling system Coolant filter system with Ruma centrifuge Fire extinguishing system Kraft & Bauer (incl. extinguishing agent bottle) Kodpfx Asxf I Nnohvodi Air purification plant Elbaron 4 machine feet

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Execution : * number of mounts : 2 - Fix table : * length : 210 [mm] * width : 210 [mm] - Press frame : fix - Hole in the table : diameter 80 [mm] Kodpfxeuhakbs Ahvjdi - Number of punches : from 50 to 150 [p/min] - Adjustable slide : 40 [mm] - Fix travel : 27 [mm] - Max height for tooling : 148 [mm] - Passage through mounts - Longitudinal : 230 [mm] - Electric connection : 380 [Volt] - Total installed power : 0.75 [CV] - Weight : 640 [kg] - Floor space (length x depth x height) : 1100 x 1000 x 1500 [mm]

Year of construction: 2003, condition: excellent (used), Press-in device for ceramic pins in rotor shafts Principle of operation: The ceramic pins are fed by means of an oscillating conveyor pot via a pneumatic hose to an inspection station in which the position of any one-sided hole is checked. This is done with an optical sensor. Incorrectly positioned parts are conveyed by a pneumatic slide into a collecting container. Pins in the correct position are fed through another pneumatic tube to the separator of the press-fit tool. The actual press-fit process is also performed pneumatically with a punch guided by a roller bearing. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too lightly into the shaft. A pressure p2, which is also manually adjustable, then presses the pin into the rotor shaft as far as it will go. A disk spring package preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted into the die, removed and clamped by an operator. This process is safeguarded by a light curtain. Design Self-supporting station integrated in complete system for pressing in ceramic pins and balls. Rotor shafts Ø: 5 - 20 mm L: 50 - 200 mm Ceramic pin Ø: 3 mm L: 5 +/- 0,2 mm Working cycle Power: 15 strokes per minute Kdedpfx Ahsib H U Devsi Safety safety door with safety switch Category 4 light curtain Emergency off Airborne sound emission Continuous sound pressure at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse. 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year 2003 Electrically height adjustable work table Documentation and wiring diagrams are available

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 130 mm Kdsdpfsb A Hg Hsx Ahvji -Number of teeth: 10 -Indexable inserts: Carbide -Recording: SK50 -Weight: 10 kg