Used Preform for sale (103)

Year of construction: 2004, condition: excellent (used), Capacity - 400 performs/min. Year - 2004/2008 Factory Consists : 1. Injection Moulding machine -Manufacturer - KRAUSS MAFFEI - Year - 2004 - Tip - 175-3500 CV - Power - 110 Kw - Clamping force - 1750 KN 2. Robot with Catcher for 48 performs - Year - 2004 - Tip - CB-PET 40 Fach 3. Preform Cooling Unit - Manufacturer - MHC Luksemburg - Year - 2004 - Tip - PL3 4. Injection Moulding Tool - Manufacturer - MHT Luksemburg - Year - 2004 - Preform Weight - 40,56 gr - Ejection Stroke - 114 mm Hjdpfx Aegbpnmjfienu - Weight of tool - 1150 Kg 5. Granulate Dryer - Manufacturer - PIOVAN - Italy - Tip - DP 625 - Year - 2004 - Power - 110 Kw 6. Granulate Silo - Manufacturer - PIOVAN - Year - 2004 - Tip - 4000 7. Cooling sistem - Manufacturer - PIOVAN -YEAR - 2004 - Tip - RPA 1200 - Power - 10,5 Kw 8. Crane - Year - 2008 - Tip - KVATP 2515E3 - Capacity - 5 tons - Dimensions - 7,5 x 2,0 mC -

Condition: used, Conveyor conveyor used to feed products to a height of 400 cm. Currently, the conveyor was used to feed preforms to a PET bottle blowing machine, but it can be used to transport other products to a great height. Manufacturer: M. TANNER AG Model: VZT-2000 /RST-2012 / HFT-4010 / AST-3615 / Conveyor height: 4300 mm Hnjdpfx Afovzz T Ajiju Belt width: 500 mm Weight: 850 kg All elements included in the machine are visible in the photos. Machine condition: used, for technical inspection .

Condition: ready for operation (used), Year of construction: 2004, PET preform injection molding machine clamping force 320t injection weight 6935gr. screw 130mm preform removal system SERVO IV, TPS robot TRT-M4-72-E, 72-fold, 4-stage, incl. removal set, conveyor belt LT/h 1825 Output approx. 17,000 preforms/hour Option1: MHT mold 72-cavity for 30.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5 liter bottles) Hnjdjnxkxwopfx Afiju Option2: 72 core sets for 27.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0 liter bottles) Line comes from our own preform production and was in production until our new line was replaced.

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor Hnedpenzhxqjfx Afiou

Condition: used, Year of construction: 2004, operating hours: 45,000 h, Used Blow Molding Machine KOSME KSB 4L up to 6800 bph Hnjdpfx Aevgvb Eofieu The KSB 4L blow molding machine is built specifically for producing PET bottles. Notably, it offers a robust, compact solution for high-performance production. Its design is both innovative and technically straightforward. As a result, it ensures optimal efficiency and a high quality-to-price ratio. With four cavities, it effectively produces up to 6,800 bottles per hour. In addition, it accommodates formats from 0.1 to 2.5 liters. The solid, well-organized structure of the KSB 4L provides operators with flexibility and reduced maintenance needs. Furthermore, the machine has completed 22,000 hours of operation. It also includes two original molds, one for 0.5 liters and one for 1 liter. Heating system and preform feed in the Blow Molding Machine KOSME KSB 4L To achieve its heating capabilities, the KSB 4L’s heating system uses four heating modules and eight heating provides a heating capacity of 46 kW. Moreover, its patented positioning system places infrared lamps precisely, thereby ensuring optimal external heating of preforms without opening the oven. For efficiency, the conveyor belt system for preform feed orients and positions the preforms. It streamlines the heating process and thus reduces preparation times. Blowing process and production efficiency Furthermore, the Blow Molding Machine KOSME KSB 4L’s pneumatic preform separation system adjusts the preforms’ distance from 40 mm in the oven to 120 mm in the mold. Then, the blowing process operates in a fully replaceable station, which adapts to different bottle diameters as needed. Afterward, the transfer unit moves heated preforms into the mold cavities, where they undergo sealing, stretching, and blowing. Each cavity consequently produces up to 1,700 bottles per hour, thereby achieving high precision and stability in production. Consumption and energy requirements In terms of energy, the KSB 4L operates on a voltage of 3 x 230/400 V, with a frequency of 50 or 60 Hz, an installed power of 56 kW, and an average consumption of 36 kW. Additionally, the compressed air system maintains a working pressure of 10 bar and a blowing pressure up to 40 bar, consuming 470 Nm³/h of air. In addition, the cooling system requires a water flow of 6.6 m³/h at an inlet temperature of 5 to 7 °C, achieving a cooling capacity of 20.8 kW. Operator advantages and maintenance Notably, the design allows easy access to all internal components, thereby enabling quick format changes and simplifying mold replacement, which takes an average of only 30 minutes. Furthermore, its linear movement arrangement and durable construction materials minimize maintenance needs. Additionally, the touch-screen interface lets operators input parameters for different types of preforms and bottles, and the system offers password protection to enhance operational security. Conclusion of the Blow Molding Machine KOSME KSB 4L In conclusion, the KSB 4L serves as an ideal solution for those seeking a reliable and high-performance used machine that produces PET bottles with precise specifications and optimized consumption.

Year of construction: 2016, condition: ready for operation (used), Various machines for processing, walking, steaming, and preforming uppers and lasts for the shoe manufacturing industry are available. 1) Moccasin upper steamer Elettrotecnica 232/S, year of manufacture: 2008, tank capacity: approx. 15l, heating time: approx. 8min, power consumption: 6kW, machine dimensions X/Y/Z: approx. 600mm/450mm/950mm, weight: approx. 70kg. 2) 2x aluminum last preforming machines Nova M-BO, year of manufacture: 2002, max. temperature: 200°C, machine dimensions X/Y/Z: approx. 950mm/700mm/1350mm, weight: approx. 250kg. 3) Upper walking machine Ring-Leibrock Wasch 3-2K, year of manufacture: 2016, stations: 2, max. temperature: 120°C, stroke rate: 25/min, machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 420kg. 4) Upper preforming machine Irleh IR-13/P, year of manufacture: 2005, max. temperature: 160°C, machine dimensions X/Y/Z: approx. 1400mm/900mm/1600mm, weight: approx. 400kg. 5) 2x upper preforming machines RKK Kölsch H-BÜ, year of manufacture: 2007, max. temperature: 180°C, machine dimensions X/Y/Z: approx. 900mm/700mm/1300mm, weight: approx. 210kg. An on-site inspection is possible. Hnodpfoxnp Rrex Afiju

Condition: ready for operation (used), COMPLETE PET BOTTLES ASEPTIC STILL/GAS FILLING LINE, YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH THE LINE INCLUDES: PREFORM DEPALETIZATOR BLOWING MACHINE KRONES CONTIFORM S16 BOTTLE AIR CONVEYOR BOTTLE RINSE, STERILIZATION, FILLING UNIT, KRONES CAF VODM 100, 60 RINSER, 80 FILLERS Hsdsxm Rwqepfx Afionu 28mm CAP STERILIZATION UNIT KRONES LABELING MACHINE CAPACITY 35.600 BPH LASERCODER BOTTLE CONTROLLER CONVEYORS SYSTEM FOIL SHRINK MULTIPACK, KRONES TWINPACK APPLICATOR PALLETIZER KRONES ROBOT 3A BELADER WITH PALETT MAGAZINE PALLET BINDER UNIT HB PALLET CODER UNIT EAN 128 RULAND TUBULAR STERILIZATOR WITH CIP UNIT STERITANK ROTH, CAPACITY 11 TONS CARBONISATION UNIT RULAND ECOLAB HYGIENE CENTRE RULAND STERILE WATER PLANT THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION.

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit Rinser | Krones | Variojet | 2002 | Rotary Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer Labeller | Krones | SV 360-10-113 | 2002 | Rotary Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats Palletizer | Krones | Pressant Compact 1N | 2002 Stretch wrapper | Robopac | Rotoplat | 2002 Air conveyor | Krones | Airco S | 2002 | For blown PET bottles Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles Pack conveyor | Krones | Multico S | 2002 | For product packs Pallet conveyor | Krones | — | 2002 | For pallet transport Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Hjdpexhf Hiefx Afionu

Condition: used, Year of construction: 2004, functionality: fully functional, NP 684 | COMPLETE BOTTLING LINE PET KRONES 30,000 BPH Product: Still water (with neck modification can also process sparkling) Capacity: - 30,000 BPH with 0.5L bottles - 30,000 BPH with 1.5L bottles - 22,000 BPH with 2L bottles Total working hours: 56,000 Preform Tipper M. Tanner AG: - Model: VZT-4010 - Year: 2004 Preform Washing System Krones: - Year: 2004 High Pressure Compressor Ateliers Francois: - Model: 20G282 - Year: 2004 - Pressure: 40 BAR Hsdpfoxl R Uasx Afionu PET Blower Krones: - Model: Contiform 20 - Year: 2004 - Number of cavities: 20 - Molds not included - Complete with preform feeder and orientator Cap Elevator and Orientator Gassner: - Year: 2004 - Supported cap types: Plastic pre-threaded cap - Type: Mechanical Cap Elevator and Orientator Gassner (Sport Cap): - Year: 2004 - Supported cap types: Sport cap - Type: Mechanical CIP Steinecker: - Model: Media - Year: 2004 UV Sterilization Station WEDEDCO: - Year: 2004 - Water treatment by UV rays KRONES Monoblock (filler and capper): - Model: Isofill - Year: 2004 - Rotation: Counterclockwise - Electric height adjustment Filler: - 88 valves - Filling type: Isobaric - Valve type: Mechanical - With degassing Capper: - 22 heads - Supported caps: Pre-threaded plastic; Sport Cap - Distribution: Pick & Place system Bottle Inspector Heuft: - Model: HBBVXTXXX - Year: 2015 - Bottle flow: Right to left - Inspection: Overfill, underfill, cap presence, cap misalignment Bottle Conveyors Krones: - Year: 2004 Labeller Krones: - Model: Contiroll - Year: 2019 - Rotation: Clockwise - Electric head adjustment - 18 mechanical cam heads - 1 roll-fed station - wrap-around label - Label presence control Shrink Wrapper Variopac: - Year: 2004 - Execution: Film only Wrap Around Packer Krones: - Model: Wrapapac - Year: 2004 - Hot glue system: Nordson - Packaging formats: 12x1.5L, 24x0.5L - Hours used: 1000 Bundle/Box Conveyors Krones: - Year: 2004 Handler Comag: - Model: H 55/2 - Year: 2004 - Double lane Palletizer Krones: - Model: Pressant - Year: 2004 - Package types: Bundles, boxes - Type: Push - Pallet warehouse - Interlayer system - Dual infeed Pallet Wrapper Robopac: - Model: HELIX HS 30 - Year: 2004 - Wrapping type: Rotating arm - Pre-stretch system

Condition: used, Year of construction: 1995, SIDEL SBO10- blowing machine SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity. As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper. After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine: which consists of: 1. Preform infeed rails 2. Preform infeed wheel 3. Infrared oven 4. Preform transfer wheel 5. Blow wheel 6. Bottle transfer wheel 7. Bottle evacuation GENERAL Presentation 1. Infeed of cold preforms Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowered by gravity. 2. Preform heating linear oven The preforms, grasped in the spindles at the neck, are turned 180 degrees so that they are head down and are made to rotate as they pass in front of infrared lamps. The linear oven has 10 heating modules. Each oven module has 8 infrared lamps. Ath oven exit, an infrared camera reads the preform temperature so as the automatic regulation of all the areas coming under its control. 3. Hot preform transfer wheel A transfer wheel with 6 arms conveys the hot preforms through the blowing moulds when they leave the oven. 4. Preform ejection An ejection system is mounted after the preform transfer wheel, in case of a non correct temperature of a preform. 5. Blow wheel Preforms are put in the mould for which opening and closing are assured by a system of connecting rods operated by a cam. The mould is locked by a mechanical device. Blow nozzle guides the stretching rod, which ensures longitudinal orientation. A set of cameras synchronizes the whole process. The moulds are controlled for temperature by chilled water circulation. 6. Bottle transfer wheel A transfer wheel with 6 arms picks up the bottles in the moulds to evacuate them from the blowing wheel. 7. Bottle ejection An ejection system is mounted after the bottle transfer wheel. It is completed by a set of photocells. If the bottle is not correct, it is ejected. 8. Bottle outfeed wheel. An outfeed wheel with 8 notches receives the bottles comes from the transfer arms and puts them down on a belt. They are held by guides. The bottle outfeed can be linked to a conveyor system. - Hoisting and tipping unit (1996) - Hopper (1995) - Elevator (1995) - Orienting rollers (1995) - Unscrambler (1995) - Gravity rails (1995) - linear oven (1995) - Blow wheel with 10 moulds (1995) - Bottle outfeed wheel (1995) - Operator control panel (1995) - Electrical cabinets (1995) 12. Chiller (1998) Energy and fluid consumption 1. Electricity Max supplied power: 216kW Average consumption: 120 to 160 kW/h according to item Voltage: 380 (3phase) Frequency: 50/60 Hz 2. Compressed air Supplied power: from 7 to 35 bar Control air pressure: 7 bar flow: 60 to 125 Nm3/h according to item Air quality: dry air, deoiled and filtered to 0,1 ppm Spherical base pressure: up to 25bar flow: 170 to 830 Nm3/h Free standing base Hodpfx Afjxlm Nysisnu pressure: up to 35 bars flow: 235 to 1.100 Nm3/h 3. Chilled water temperature: 10 to 12 celsium degrees pressure: 5 to 6 bars flow: up to 9 m3/h calories to be removed: up to 22.000 Kcal/hour Max supplied power: 216kW Voltage: 380 (3phas...

Year of construction: 2017, operating hours: 50,000 h, condition: excellent (used), functionality: fully functional, Pulian - Granulator - A Series A1,000 – 185KW - Conveyor with built in metal detection - Double bagging station and zig zag - Eriez metal removal system at bagging end Hnsdsxg Th Eopfx Afiju - Includes one spare set of blades and hopper - Immaculately maintained and serviced regularly. This line has been used exclusively for post production PET plastic – mostly preforms and sheets. Output on preforms is 2+ tonnes per hour, sheets 1.5+ tonnes per hour

Condition: used, Year of construction: 2000, functionality: fully functional, Manufacturer: HOMAG Model: KFL 10/22/QE/CF Type: Double-side Sizing & Edge Banding machine Year: 2000 Status: Connected, test possible. Location Lithuania Basic machine Workpiece thickness 12...60 mm Workpiece width 70... mm Workpiece overhang to transport chain 40 mm Hedpfjuggpzsx Afionu Feed 10...40 m/min Power consumption Main drive 3...75 kW Height adjustment 0,2 kW Machine main drive Feed 6...30 m/min Power draw 2,2...6,9 kW Gluing unit Edging type: Straight and softforming edges Edging material height 16...65 mm Workpiece feed max. 60 m/min Contour, trimming unit CF/CS 10/11/12 Discharge valve HMA 1 Melting unit HMG 12-1x1-M-HO Gluing section for preformed parts Type of edge Straight edges drum profiles Edge material Belt from roll Snipping unit for profile parts WK 46 Saw blade (diameter 80 mm, cutting width 3.2 mm, drill hole 34 mm, number of teeth 20) Flush-trimming unit and scraping unit for performed parts Buffing unit for performed parts Specification, layout on request

Condition: used, operating hours: 48,000 h, Used Bottling Line KRONES for still, sparkling water and CSD 25000 bph General Features of the Line The Used Bottling Line KRONES for still, sparkling water and CSD 25000 bph offers a complete solution for bottling still water, sparkling water, and carbonated soft drinks in PET containers. The system achieves a nominal output of 25,000 bottles per hour. Currently, the line remains in production, and therefore, buyers can inspect it while running. It will be available starting February 2026, making it ideal for companies planning upcoming upgrades. Supported Containers and Formats This bottling line handles PET containers in 0.33-liter, 0.50-liter, 1-liter, and 1.5-liter formats. Moreover, it operates with standard Alaska and Corvaglia neck finishes, which are compatible with closures for both still and carbonated beverages. As a result, the Used Bottling Line KRONES for still, sparkling water and CSD 25000 bph ensures flexibility for a wide range of industrial applications. In particular, it supports rapid format changes and streamlined integration into existing operations. Isobaric Filling and Food Safety The core of the line features the KRONES VODM Clean Room isobaric filling monoblock, equipped with 96 filling valves. This ensures pressure remains stable during filling, which consequently preserves carbonation in sparkling products. In 2024, KRONES installed a Volumetic Checkmat inspection system, which verifies fill level and cap presence with high accuracy. Not only does this ensure food safety, but it also helps maintain packaging consistency. Furthermore, the system allows for real-time fault detection. Hedewd Srtopfx Afisnu Bottle Blowing and Preform Preparation The process begins with the KRONES Contiform S14 blow molder, which operates with a preform feeder and a TM KPT preform tipper. To accommodate different formats, the machine includes mold sets for 1.5 L, 1 L (KRONES and BBM), 0.5 L, and 0.33 L. In addition, a Euroklimat industrial chiller, installed in 2021, cools the molds efficiently to maintain optimal forming conditions. Thus, the line supports continuous, high-quality bottle production. Capping and Saturation The system uses an 18-head capper to apply Alaska and Corvaglia caps. A cap feeder and tape system supply closures efficiently. Meanwhile, the CARBOFLOW 45 saturator injects CO₂ into the product to maintain precise carbonation levels. Even during peak operation, this component ensures carbonation consistency. Consequently, the line can process carbonated beverages without sacrificing quality. Labeling, Marking, and Packaging The KRONES Contiroll rotary labeler applies labels across all supported formats. A DOMINO laser encoder prints production data directly onto each bottle. Subsequently, a COMAG handle applicator, a KRONES Variopac Pro shrink wrapper, a KRONES Modulpal palletizer, and an ATLANTA Omega pallet wrapper complete the packaging cycle.

Condition: used, Year of construction: 2005, Overview  This blow moulder was manufactured in 2005 by German company Krones. The machine has been regularly serviced, overhauled in 2022, equipped with a new control system in 2024, and had its oven chain replaced in 2025. It is currently set to run at approx. 13,000 bph, limited by the filler, but its capacity can be increased up to 19,000 bph. The machine is available with preform feeding system, cooling unit, and spare parts. Technical data  Capacity: up to 19,000 bph (currently running at ~13,000 bph) Formats: 0.2L, 0.5L, 1.0L, 1.5L PET bottles Neck finish: 1881 Scope of Delivery  Blow Moulder | Krones | Contiform S12 | 2005 Preform feeding system (silo, elevator, sorter, chute by Tanner) Cooling unit Set of spare parts Hedpfxexbubpj Afijnu

Condition: used, Year of construction: 2010, Bottling Line: Krones CSD Line Year of Manufacture: 2010 Hnodpfx Afexfg Ebeisu Suitable for: Carbonated Soft Drinks Currently Running: Apple Juice with Water and CO2 Container Sizes: PET 0.5 L – PET 1.0 L – PET 1.5 L Neck Formats: PCO 1810 – 28 mm / PSO 28 mm – 1810 – 1881 (Short Neck) Capacity: • 24,000 bottles/hour (0.5 L) • 18,000 bottles/hour (1.5 L) Control System: Siemens Simatic S7-series PLC Operating Hours: approx. 40,000 Krones VarioClean F AUT: Fully automatic CIP system, 4 x 5,000 L, 30 m³/h GEA TDS Processing Plant: Includes flash pasteurizer, mixer, carbonator, degasser, and tanks Preform Hopper and Feeder Conveyors: • Preform Feeding System: Krones Contifeed RS • Preform Cleaning Unit: Prejet Linear Cap Feeding System: Gassner, includes cap rinsing and sterilisation Blow Moulder: Krones Contiform S12M Ultra Clean Volumetric Filler: Krones 86-22 (Volumetric VODM-PET) with capper Filler Block Cleaning: Krones VarioDos ultra clean Date Coder: Domino DDC 3 (laser) Filling Level Inspection: Krones Checkmat Bottle Conveyors: Krones SYNCO S Bottle Leak Tester: Krones Flowliner Labelling Machine: Krones Contiroll OPP 720-15, double roll feed, hotmelt glue applicator Label Inspection: Krones Checkmat 731 EM Shrink Packer: Krones (Kettner) Variopac TFS 30 (2003) Package Conveyors: Krones Multico S Handle Applicator: Twin Pack Pack Coding: Leisinger Jet 3 (inkjet) Palletiser: Krones Robopox Modulpal (year 2016) Reference Code: NP 647

Condition: used, Year of construction: 1992, Used Blow Molding Machine Sidel 1992 Hjdpjvgunwjfx Afisnu Manufacturer: SIDEL Model: SBO2 Year: 1992 Speed (b / h): 3000 Processed formats: 0.25ml – 2 liter Accident prevention protections: Yes Manuals available: Yes Revisions available: Yes Operating status: In production Number of cavities: 2 Preform neck type: Preform 1881 weight: 9000kg Quick format change: Yes Preform loader: Yes Preform orientator: Yes Compressor: No Chiller: No Air recovery system: No PLC type: Mitsubishi Spare parts available: Yes Hours worked: 2000 Consumption: Volt:360 Kw:40 Hz:100 Notes: Machine working stabile suitable to be connect with filler machine. The machine has been completely updated, hmi electronics and new plc.

Condition: used, Used Bottling Lines for edible oil 6000 bph General Configuration of the Bottling Line The Used Bottling Lines for edible oil 6000 bph line processes edible oil in 1-liter PET bottles, operating at a nominal speed of 6000 bottles per hour. The configuration includes equipment from multiple manufacturers, integrated to ensure continuous operation and reliability in filling, labeling, packaging, and palletizing. Operators correctly shut down the entire system in December 2022. At present, the machines are dismantled and stored in suitable conditions. Consequently, this line is immediately available for relocation and reuse. Overall, the structure represents a compact yet complete solution for medium-scale production. Container Formation: KOSME Blow Molding Machines The Used Bottling Lines for edible oil 6000 bph line includes two blow molding machines from KOSME, model KSB3000, year 2001. Each unit works with a preform box and an automatic transport system that feeds the blower. As a result, the system supports on-site bottle production. Therefore, it reduces logistics costs and improves plastic material handling. In addition, the dual-machine setup enhances production continuity and minimizes downtime. Hedowlt Dgspfx Afionu Cooling System: MTA Chiller and Air Conveyors An MTA chiller, model TAE 051, year 2000, cools the molds in the blow molding machines. Moreover, KOSME air conveyors, model L2000, year 1999, made of AISI 304 stainless steel, transfer the blown bottles to the filling monoblock. Notably, the system includes electrical cabinets with integrated PLCs and built-in air filters. Thus, it ensures effective airflow control and maintains consistent air quality. From a technical standpoint, this contributes to long-term reliability and hygienic conditions. Filling Monoblock: ICS RVP-12/ZS-3N The ICS filling monoblock, model RVP-12/ZS-3N, year 1995, serves as the core of the Used Bottling Lines for edible oil 6000 bph. This machine doses edible oil with precision, ensuring product integrity and consistent fill volumes. Furthermore, the system synchronizes with upstream and downstream units. Consequently, it enables stable operation even under variable load conditions. Likewise, its mechanical construction supports easy maintenance and spare part replacement. Labeling Machine: ICS with Cold Glue An ICS labeling machine, model ERG-6/2/2, year 1995, applies paper labels using cold glue. Specifically, the machine ensures proper adhesion on PET containers. Additionally, it supports the 1-liter format used throughout the line. In practice, this technology remains widely adopted for edible oil packaging. Therefore, the labeling unit integrates efficiently into the overall production layout. To sum up, it provides a cost-effective solution without compromising performance. Internal Handling and Packaging ICS conveyor belts, installed in 1995, connect all key stations. Subsequently, the line transitions to the packaging phase.

Condition: used, Used PET Complete Bottling Line for Water – CSD – 18000 bph represents a highly efficient industrial solution for bottling and packaging still water, sparkling water, and soft drinks in PET containers. This system is engineered to sustain a nominal output of 18,000 bottles per hour in the 2-liter format, providing high operational flexibility even for different bottle sizes with the use of optional format conversion kits. The entire production cycle of the Used PET Complete Bottling Line for Water – CSD – 18000 bph begins at the preform feeding area, where an automated system consisting of a hopper, tipper, and preform feeder manages the accumulation and efficient transfer of preforms to the blow molder. The blow molding module, equipped with fourteen cavities, employs heating and high-pressure blowing to ensure maximum dimensional and mechanical uniformity of the bottles, optimizing the production throughput of the line. Transfer of the freshly blown bottles to the next stages is managed by stainless steel air conveyors, which ensure gentle and orderly transportation without risk of deformation, enabling seamless integration between the blow molding and filling sections of the Used PET Complete Bottling Line for Water – CSD – 18000 bph. The sizing of the conveyors, speed regulation, and centralized automation are designed to support the continuous productivity demanded by the beverage industry. Core of the line: filling, capping, inspection, and coding The line is equipped with a premix system for the preparation of CSD and sparkling water, including mixing and carbonation stages. It is designed to integrate CO₂ management and ensure production stability. The functional core of the Used PET Complete Bottling Line for Water – CSD – 18000 bph is the isobaric filling monoblock, paired with a rinsing station for sanitizing the bottles at infeed. Isobaric filling technology allows the handling of both still and carbonated products, providing dosing accuracy and operational versatility. In particular, the presence of a nitrogen dosing system downstream of the filling phase optimizes product shelf life and quality by reducing oxygen content and ensuring stability for sparkling water and CSD production. Hedpfew D E Ubjx Afisnu The capping phase uses a rotary capper supplied by an automatic cap elevator, with integrated systems to verify the correct application and presence of the cap. The system’s high reliability is ensured by mechanical synchronization between stages, minimizing the risk of errors even at high speeds. Food safety is further supported by targeted technical solutions that maintain product protection throughout every processing step. Quality inspection along the Used PET Complete Bottling Line for Water – CSD – 18000 bph is handled by multi-level optical vision and electronic control systems.

Condition: used, 01. Product to be filled “CSD” 02. Type of Bottle RoundBottles 03. Hsdpfx Afovgt Upeijnu M.O.C. of the Bottle PET Bottles 04. Fill Volume / Bottle sizes 500ml 05. Type of Caps Screw Caps 06. Type of Labels BOPP 07. Output required 416 Bottles Per Minute on 500 ml     BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION: Used blow molding machine for PET bottles with production capacity up to 25,000 bph with the 500ml format. Year of construction, 2007. Used blower complete with Octagon tipper, Air recovery system, preform hopper. This machine is immediately available for sale and in case of request we can carry out pre-production maintenance. Detached from production in fully functional status is excellent opportunity for used equipment. We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request. Air conveyor system NEW/used revised 2024   NEW RINSER /FILLER/SCREW CAPPER, SPORT CAPPER: Auto Rotary 70 Head Rinser Cum 70 Head Counter Pressure Filling Cum 15 Head Rotary Screw Cap Sealing Machine,AND 15 HEAD SPORT CUP system Model Uinibloc : 70x70x15x15, fitted with Disc cap feeder, chute&shoe, SS safety hood, PLC/HMI of Schneider make, Electronic BPM meter & Counter, sensor at in feed & out feed. Fitted with one set of change parts of 250ml PET bottle. All Product Contact Parts like Tank, Valves & all product contact parts will be SS316Grade. Output – 416BPM on 500 ml bottle. Fully Automatic Bulk Cap Elevator Additional Set of Change Parts If Required RINSING SECTION : TOP OF THE ROTARY RINSSER S. SLAT CHAIN CONVEYOR Body fabricated out of pre-polished S.S. Sheets, of 8’ length for carrying empty bottles to water rinsingnozzles and rinsed bottles to the Filling Machine. BOTTLE GRIPPING HEADS The gripping heads hold the bottles by neck. The bottle carrying grippers are supported by carousel thatby turning makes the grip lever arms slide on a fixed helical guide. In this way the bottles areturned upside down to have the openings atthe bottom to coincide with spray nozzle. AIR CLEANING PROCESS The bottles when rotated are brought into theline with the fixed nozzle in such a way thatits opening partially contains the nozzle. Airjet cleaning air sprayed inside the bottle forpresettime. VACUUM PROCESS The bottles when rotated are brought into the ine with the fixed nozzle in such a way that its openingpartially contains the nozzle.

Condition: used, Year of construction: 2008, Used Revised Sipa Rotary Blow Molding Machine 2008: A Comprehensive Overview Are you in the market for a reliable blow molding machine? Look no further than the used Sipa Rotary Blow Molding Machine 2008. In this article, we will delve into the details of this machine, exploring its features, specifications, and benefits. Whether you are a seasoned professional or just starting in the industry, this article will provide you with valuable insights into the Sipa SFR8. Table of Contents Introduction Overview of the Sipa Rotary Blow Molding Machine 2008 Features and Specifications Benefits of the Sipa SFR8 Applications Maintenance and Care Tips for Choosing a Used Machine Safety Features and Manuals Current State and Availability 1. Introduction Blow molding machines play a crucial role in the production of various plastic containers. The Sipa Rotary Blow Molding Machine 2008, also known as the SFR8, is a popular choice in the industry. It offers efficiency, precision, and versatility, making it an excellent investment for manufacturers. Let’s explore its features in detail. 2. Overview of the Sipa Rotary Blow Molding Machine 2008 The Sipa Rotary Blow Molding Machine 2008 is manufactured by Sipa, a reputable company known for its innovative solutions in the packaging industry. This machine, specifically the SFR8 model, was introduced in 2008 and has gained recognition for its exceptional performance. 3. Features and Specifications The Used revised Sipa Rotary Blow Molding SFR8 comes with a range of features and specifications that make it stand out in the market: Year: 2008 Manufacturer: Sipa Model: SFR8 Speed: 12000 BPH (Bottles Per Hour) Containers: PET (Polyethylene Terephthalate) Formats: 0.50 L Additional details of the machine include: No. of cavities: 8 Preform loader: Yes Preforms tipper: Yes Preforms unscrambler: Yes Hnjdpjvgufiefx Afiou Compressor: Not stated Chiller: No Preform neck type: 1810 Air recovery system: Yes Type: Rotary 4. Benefits of the Used revised Sipa Rotary Blow Molding SFR8 Investing in the Used revised Sipa Rotary Blow Molding offers several advantages: Efficiency: With a speed of 12000 BPH, the machine ensures high productivity and optimized production cycles. Precision: The SFR8 provides precise molding capabilities, resulting in consistent and high-quality bottles. Versatility: It accommodates PET containers and supports the format of 0.50 L, making it suitable for various industries and applications. Reliability: Sipa is known for its durable and reliable machines, minimizing downtime and maintenance costs. Innovative Features: The machine incorporates advanced features such as preform loaders, tippers, unscramblers, and an air recovery system for enhanced efficiency.

Condition: used, operating hours: 31,000 h, Kosme Used Complete Bottling Line for Juice and Milk 2006 If you are looking for a complete bottling line for your dairy or juice products, look no further than the Kosme Used Complete Bottling Line for Milk 2006. This high-quality bottling line was previously used by Kosme to bottle milk in 2006 and features state-of-the-art equipment from leading manufacturers like Kosme, Krones, and Mariani. It can also be used to bottle edible oil in PET with neck 38, this is because the filling system is by weight and therefore allows you to have this possibility. At the filler output, there is a weight control system which guarantees the correctness of the filling. The Kosme Used Complete Bottling Line for Milk runs clockwise and includes a preform tipper and preform orientation/elevator for efficient preform handling. The line also features a KOSME KSB 4L blow molding machine that can handle 1LT and 1.5LT containers and comes with air conveyors for improved production efficiency. Hedpevgui Ijfx Afijnu In addition, the Kosme Used Complete Bottling Line for Milk includes a KOSME 16.8 filling monoblock that features a 16-valve filler for filling by weight, ensuring accurate filling and consistent product quality. The 8-head capper for plastic pre-threaded caps with a pneumatic cap lifter ensures efficient capping, while the KRONES roll-fed labeller with either 10 heads (depending on your needs) allows for high-speed labelling. Equipment of the used line The MARIANI case packer is also included in the Kosme Used Complete Bottling Line for Milk, which provides efficient packing and easy handling of finished products. Bottle/crate conveyor belts and a case palletizer are also included in the line, making it easy to move the products along the production line. The used bottling line is designed to handle PET containers and can handle dairy and juice products in 0.50 L and 1.0 L formats. With a production capacity of 6000 bottles per hour, this used bottling line is a highly efficient and cost-effective solution for any beverage production facility. In summary, the Kosme Used Complete Bottling Line for Milk 2006 is an excellent choice for any dairy or juice product manufacturer looking to streamline their production process and increase efficiency. With its high-quality equipment from leading manufacturers, this bottling line ensures consistent product quality and high-speed production, all while minimizing downtime and maximizing profits.

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Hnedpfx Afjvgu D Seisu Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: used, Used bottling line PROCOMAC for still and sparkling water up to 12000 bph We offer a complete bottling line for natural and carbonated mineral water, specifically designed to meet the complex needs of technicians and industry experts. This solution not only handles bottle formats from 0.5 to 2 liters but also produces up to 12,000 bottles per hour, ensuring high reliability and excellent performance.. SIPA Blow Molder and Preform Management The SIPA SFR 12 blow molder, manufactured in 2000, initiates the production process. It efficiently manages preforms using a dumper and elevator-orienter. Furthermore, the integrated cooling chiller and four sets of molds allow the machine to produce bottles of various sizes with both precision and flexibility. As a result, it ensures smooth operations throughout the initial production phase. PROCOMAC Monoblock: The Core of the System The PROCOMAC monoblock unifies three critical bottling functions into a single system. First, the PROCOMAC GRIPSTAR 2R rinser cleans bottles thoroughly, preparing them for the filling process. Then, the PROCOMAC FILLSTAR PET filler quickly and accurately fills bottles with natural or carbonated mineral water. Finally, the PROCOMAC 10-head PICK & PLACE capper applies caps securely and efficiently. Hodpfx Afjvgu Tyjienu Moreover, the saturator and CIP (Clean-In-Place) system maintain hygiene standards and streamline maintenance operations. These additional components not only enhance the monoblock’s efficiency but also ensure reliable performance during production. Transport and Packaging Systems The PELACCI P.13.8.5 cap elevator consistently supplies caps to the system without interruptions. In addition, the PE ROLLMATIC CI 540 12T labeler applies labels accurately to bottles of different formats. Subsequently, the ZAMBELLI LFT 50 shrink wrapper quickly packages bottles into bundles, while the COMAG H 55/1 handle applicator attaches handles to bundles for easier transport. Furthermore, the LEVATI ARTIS palletizer organizes bundles onto pallets with precision. Similarly, the ROBOPAC HELIX HS 30 pallet wrapper wraps the load securely to protect it during transportation. Lastly, the EIDOS labeling system prints and applies labels directly on the production line, allowing for full customization, which ensures adaptability to various production requirements. Conveyor Belts for Optimal Flow The conveyor belt system facilitates efficient material flow across the production phases. Specifically, air conveyors move bottles swiftly, while dedicated belts transport bundles and pallets seamlessly between sections of the line. Consequently, these systems maintain a continuous and smooth workflow, which significantly reduces production downtime. Current Status and Availability This Used bottling line PROCOMAC for still and sparkling water up to 12000 bph operates efficiently and will remain in use until April 2025, when it will be dismantled and replaced. Therefore, we encourage interested buyers to view the line in operation before dismantling to evaluate its performance and condition. Ultimately, this complete and integrated solution delivers reliable and high-performing bottling capabilities for industrial water production.

Condition: used, Year of construction: 2003, operating hours: 19,500 h, Used Blow Molding Machine Sidel SBO 2003 We have a Used Blow Molding Machine available for purchase, the Sidel SBO 2003, with the reference. The machine was manufactured by Sidel in 2003 and has a model of SBO 12. It has a speed of 17000 BPH and is suitable for creating PET containers. This particular machine has 12 cavities and comes equipped with a preform loader, preform tipper, and preform unscrambler. It also has an air recovery system and is a rotary type. The preform neck types it supports are 1881 and 2925 neck. Hedpfovr S Tnsx Afijnu The machine is currently in a ready state for operation and has safety features installed. It also comes with manuals and has been in operation for 19500 machine hours. If you’re interested in purchasing this machine, please let us know.

Condition: used, Year of construction: 2005, Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph The Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph efficiently delivers continuous production in the bottling sector. Manufactured in 2005, this machine currently operates and, importantly, remains available for on-site inspection until March 2025. Technical Features of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine, model SR8, features 8 cavities for bottle formation. Consequently, this configuration produces 12,000 bottles of 0.5 liters per hour. For larger formats, such as bottles of 1.5 liters and 2 liters, it achieves a production speed of 9,600 bph. Moreover, the 18-81 bottle neck type guarantees compatibility with a wide range of caps and closures, making it adaptable to diverse production needs. Thus, this standard ensures precise sealing and airtight closures.. Hodpfxsvv E Hie Afijnu Main Components of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine integrates a preform loader, a preform elevator, and a preform orientator, which work in harmony to provide an automated and efficient feeding process. Preform loader: This component loads preforms from the storage area or initial container and transfers them seamlessly to the elevator system. Consequently, it ensures continuous feeding without manual interruptions. Preform elevator: The elevator lifts the preforms from the lower level to the machine’s operating level, ensuring a continuous flow to the orientator and minimizing downtime. Therefore, production proceeds smoothly. Preform orientator: The orientator positions and aligns each preform correctly before inserting them into the blow molding cavities. Additionally, using mechanical guides or vibrations, it prevents misaligned preforms from entering the process. The integrated tipper tilts and discharges large quantities of preforms, typically stored in containers or boxes, in a controlled manner. Subsequently, the tipper feeds the preforms into the production line, maintaining a consistent flow while preventing overloads and blockages. By automating this process, the tipper reduces manual handling and significantly increases safety and productivity. The unscrambler plays a key role in separating and aligning the preforms before their insertion into the blow molding cavities. Specifically, by applying rotation and vibration, the unscrambler ensures optimal positioning, minimizing errors and machine stoppages. Hence, the combined action of the tipper and unscrambler maximizes production line efficiency and guarantees product quality. Furthermore, the machine’s rotary configuration facilitates continuous and stable production, which is ideal for high-intensity manufacturing. Its rotary technology, as a result, distributes heat evenly during the blowing process, ensuring high-quality output. Safety and Documentation The blow molding machine includes technical manuals and safety protections.