Used Thermoform for sale (192)

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Itjdpfx Afsq Nn Hceien Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: not inspected (used), functionality: unexamined, Good day, various machines and containers are available for sale, including: - Robust film cutting system - Thermoforming machine for films and molded parts - Factory-new agitator and storage tanks between 300-1500l with motor and control unit Itedpfjvl Hntex Afion - 20l planetary mixer - Powder mixer and much more The attached images show only a small sample. - Various laboratory devices - Yale heavy-duty pallet truck, 3 tons - Brabender Technologie bag dump station - Further battery-specific laboratory equipment If you are interested in one or all of the items, we should simply arrange an on-site appointment!

Condition: new, Year of construction: 2025, operating hours: 8 h, total length: 2,000 mm, total width: 3,000 mm, total height: 3,000 mm, overall weight: 1,000 kg, type of input current: three-phase, power: 2.5 kW (3.40 HP), pressure: 3 bar, compressed air connection: 3 bar, input frequency: 50 Hz, The hardware complex is designed to form portions of minced meat by volume - 8 portions of 1 kg + up to 100 g and feed them into molds made on a thermoforming machine. - Productivity of the machine unit: a) up to 8 cycles / min for minced pork; from about 70/30 to 30 tons / shift b) up to 8-5.4 cycles / minute on average, depending on the content of beef fat in minced meat, pork + l / l -70/30, up to 20-22 tons / shift Total electrical power consumption - 2.5 kW. included: 1.Filler 2.Tipper option 2 position empty product Height ~ 700mm and ~1900mm 3.Screw conveyor Iedpev R Ttaofx Afijtn Multivac is not included - MULTIVAC R515 bottom film - 140 microns Top film - 60 microns. Pack size - 135 x 175mm, block size 4x2 - 375 x 585 mm Length x width x height 2000.0 × 3000.0 × 2000.0 This will make it easier to work in production. This will increase the production capacity of minced meat.

Year of construction: 2013, operating hours: 1,234 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: o, TECHNICAL DATA – MAGIC SKIN 5035 Power supply: 240 V – 1 Ph Required power: 3.5 kW Overall machine dimensions (L x W x H): 1860 x 1000 x 1350 mm Working table height: 1020 mm Weight: 150 kg Maximum carton size: 495 x 345 mm Maximum product height: 100 mm Air consumption: – Performance: two cycles / min Itodpfxoxcv U Hs Afijn Notes: Technical modifications reserved. Performance depends on operator and type of packaging.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, film width: 1,000 mm, type of input current: three-phase, pressure: 8 bar, input voltage: 380 V, Model year 2024 100 mm cup mold, four-corner lid mold, 110 mm lid mold included Working speed: 70 cycles/minute Ijdow Dfdcopfx Afijtn The machine will be sold together with its molds. Our machine is currently in active operation.

Condition: excellent (used), COTEC Type: HCS 100 P-UH COTEC HCS 100 P-UH – Hydrophobic Coating System / PVD Unit For sale is a COTEC HCS 100 P-UH, a fully automatic hydrophobic coating system for industrial applications. The unit is ideal for producing high-quality, abrasion-resistant, and transparent hydrophobic and oleophobic coatings on glass, plastic, or metal. Fields of application: • Optics (e.g., eyeglass lenses, precision optics) • Display and electronics industry • Medical technology • Automotive and supplier industry • Consumer goods and decorative surfaces Technical data & features: Model: COTEC HCS 100 P-UH Process duration: approx. 12 minutes per batch Itsdpfsw Tbvrex Afion Capacity: up to 110 substrates Ø 70 mm (2 racks) Internal chamber: Ø 600 × 540 mm Heatable chamber up to 65 °C Fully automatic process control (PLC) with 19'' operator panel Vacuum system with integrated evaporator for DURALON materials Uniform coating, even on complex 3D geometries No post-treatment required Weight: approx. 300 kg Condition: used Scope of supply: (See image) (Subject to change and error in technical data and information!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 00020, Type: Transfer device R3 Equipment / Additional information: Itsdjupi Aqspfx Afijn Air pressure: min 6 bar The maximum size of the stacking basket is 530x300mm.

Year of construction: 2019, condition: new, machine/vehicle number: BI3, Tempering furnace for stress relieving and forming acrylic glass The furnace has two doors on one side and 2 narrow doors with rail system on the back. The sheets are hung there and pneumatically clamped with foot switch and released again. - The oven has a maximum temperature of 230°C and a permanent deviation around the set temperature of +/-3°C at 75°C . - The internal dimensions are approx. width 1600 x depth 2000 mm. The height of the oven in the rail system can accommodate a 1800mm high free-hanging panel. - You can see the rail system on the attached pictures. The rail system can also be mounted on the front side. It can accommodate panel thicknesses from 1.5 to 25mm and can support a maximum panel weight of 150kg. - The power can be adjusted in several steps. - Air circulation approx. 3.000 m³/h - doors can also be opened from the inside for safety reasons Ijdpfxob Nzyce Afietn - Safety device which also switches off the heating in case of fan failure.

Year of construction: 2021, condition: ready for operation (used), A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Itsdpfx Afsxaphboion

Year of construction: 2006, condition: repair required (used), Repak thermoformer, type: RE 25, machine number: 2500020, year of manufacture: 2006, 220/240 V, 3 Ph, 50 Hz, 12 kW, 30 A, die: (12x) 85 mm x 110 m Spare parts for sale. Picture 1. Itedpsu Hz Tdjfx Afisn Controller, electronic components, tools, vacuum pump, frame parts, etc. Includes tools of several sizes. In the condition shown in the picture. Complete forming parts set: 4000 EUR. See Picture 2. Flender motor ZF48-M100LB4, 250 EUR (Picture 3). Busch vacuum pump Wv1000B-001 KDFC, 1200 EUR (Picture 4). Automatic 2-line label printer and spreader, complete: 1500 EUR. Picture 5. Rotary cutter for hard foil: 500 EUR (Picture 6). Outfeed conveyor: 300 EUR (Picture 8). For sale as a set for 4000 EUR, as is. Complete die set: 2500 EUR. HMI and electronic parts. Other parts.

Condition: new, The Zerma ZCS Shredder integrates leading shredder and granulator technology into a single compact unit. With the development of the shredder and granulator combination, ZERMA has successfully continued the expansion of its product portfolio. By combining the proven design and high torque of the single shaft shredder with an extremely effective granulator, ZERMA can deliver a reliable and compact pre-shredding system. The shredder and the granulator are driven individually, which contributes to better control of the whole process. To increase the efficiency, ZERMA Smart Drive System is used to constantly control the load and adjust the amperage accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where predictable quality in size reduction and granulation is required. Typical applications include, but are not limited to, the following: Injection Molding Thermoforming Blow molding Recycling Extrusion Itsdpoghgd Sefx Afijn Waste

Year of construction: 2022, condition: new, machine/vehicle number: AM00222071301-01-01, Manufacturer:AUTOVAK Model: M320 Main material:Stainless steel Itsdpfepfcd Asx Afien Dimensions:3,550 mm x 1,050 mm x 2,300 mm Weight: ca. 1,200 kg Power supply: 3 x 400 V + N + E / 50/60 Hz Compressed air supply: Pressure min. 6 bar, 500 L/min (without printer) Width of top web:305 - 310 mm Roll core diameter: 3" Roll diameter: 400 mm Width of bottom film:322 +/- 1 mm Roll core diameter: 3" Roll diameter: 300 mm Cutting size: 130 x 100 mm Forming depth:15 mm Loading area length:450 mm Installed power: 15 kW Noise level:Less than 72dB Production speed: 3 ~ 10 cycles/min Equipment: Forming tool for 3 blisters per stroke each with opening aid at one corner; Inner dimensions: 105 mm x 75 mm x 15 mm Condition: Like new (demo model)

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Iodpfx Aehbu E Hjfijtn Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: ready for operation (used), Year of construction: 2000, Recirculating air thermal cabinet / warming oven / drying cabinet / drying oven Alltherm WS 3750 - 1.5 - E - 24l The heated cabinet is equipped with two separately controllable chambers. Maximum temperature per chamber: 250 degrees Celsius Itedpfewuqvrox Afien Approximate dimensions: Left chamber: Height 167 cm x Width 131 cm x Depth 91 cm Right chamber: Height 167 cm x Width 145 cm x Depth 96 cm Approx. external dimensions of the entire oven: Length 380 cm x Height 250 cm x Depth 128 cm The left chamber is additionally fitted with a viewing window. Location: Siegen ____ Our general terms and conditions apply. The seller assumes no liability for typographical or data transmission errors. The information and images were provided by the owner and released for publication. The appearance of the items on offer corresponds to their age and the photos shown. The technology and wear and tear of the items offered are age-appropriate. Used machines are sold exclusively to commercial customers and without warranty.

Year of construction: 1996, condition: ready for operation (used), Heating output: 22.15kW, motor power: 2.5kW, max. compressed air supply: 10bar, including spare parts. Ijdpfx Asglvdyefiotn

Condition: used, functionality: fully functional, total height: 3,700 mm, total width: 5,000 mm, total length: 7,700 mm, For sale: well-maintained Hassett International vacuum forming machine. The machine has a maximum working area of 3000 × 3500 mm and can form products up to 1100 mm deep. It is ideal for manufacturing spas, swimming pools, hot tubs, and other large-size products. Technical specifications: • External dimensions: 5000 × 7700 × 3700 mm • Can be disassembled into smaller parts for transport • Maximum sheet thickness: up to 8 mm (acrylic, ABS, etc.) • The control computer allows switching on only the required heating sections of the oven and adjusting their temperatures – for smaller products, the entire oven does not need to be in operation Included in the set: • Oven (with ceramic heating elements) Iedpfsw Nhdhex Afijtn • Hydraulic lift table • Vacuum pump • Vacuum tank • Computer and control electronics • Worktable • One mould (octagonal, black) The green rectangular mould is not included. The machine is in daily use. Testing on-site is possible, and training can be provided. Upon request, we can provide contact details of a reliable company that can disassemble, transport, reassemble, and maintain the machine in the future.

Condition: used, We are selling a well-maintained generator from Kiefel. The generator and tubes have few operating hours. The rotary table shown in image 1 is no longer available. Itsdpfow Hdzlox Afien

Condition: good (used), Year of construction: 1997, functionality: fully functional, Bürkle Multifoiler, membrane press Itsdew Enl Sopfx Afion Model BTF 1628/60 Year of manufacture 1997 System for coating smooth and shaped MDV parts with thermoplastic films from a roll or as cut-to-size, for PVC, PP, high-gloss PVC, ABS film. Suitable for the thermoforming or membrane process. Max. part size 1250x 2550 mm/ Part thickness 6-35 mm Heating plate dimensions 1600 x 2800 mm Max. heating temperature 140° Stroke 230 mm Control Siemens Total connection 38 Kw with 2 aluminum tables and reserve table Weight 16.5 t Press length: 2,550 mm Press width: 1,250 mm Max. workpiece thickness: 35 mm

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz Iedpfxen D Ew Ij Afiotn 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Ijdpfx Afohb Dtpoietn Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Year of construction: 1992, condition: ready for operation (used), Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used much since. Itodpfx Afoq Ixgloien

Condition: good (used), 8 head sauce depositing system to sit over Multivac thermoformer. Has been dosing sauces and gravies into pouches on Multivac machine. Bought new in 2019 and the factory closed shortly afterwards due to COVID Iodpfjq Dagmex Afietn

Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible. Itsdpfx Aowih Arofion

Condition: excellent (used), High quality line consisting of elevated conveyor, vibratory feeder, Ishida multihead weigher and gantry. Was feeding sliced cooked chicken into a Multivac thermoformer but could also be used to sit over a bagging machine. We can also offer the distribution unit which was above the Multivac. Isdpfxoivqare Afistn

Year of construction: 1976, condition: ready for operation (used), Three Illig punching machines are available for the precise punching of thermoformed plastic parts from film material. Working width: approx. 900mm, working height: approx. 120mm, roller diameter: approx. 196mm, machine dimensions X/Y/Z: approx. 2500mm/1300mm/1600mm, weight: approx. 750kg. Including two hydraulic punching machines Wolf EHPT 6E and two manual swivel arm punching machines. On-site inspection is possible. Itjdpfx Aowixybofisn