Used Thermal Spray Coating for sale (5,319)

Condition: new, Year of construction: 2025, total height: 982 mm, total length: 4,000 mm, total width: 1,100 mm, volume flow: 18,000 m³/h, warranty duration: 12 months, Extraction wall with 18,000 m3/h Max. power consumption 5 kW/h Psdpfxjwz Ic No Ah Hogg Electric motor 4 kW Air unit 18,000 m3/h Nicotra ADH 400 The full description can be found in the attachment to this listing.

Condition: used, Screen printer, manufactured by Rehm Thermal Systems GmbH Type: RDS 3800/500 G Power: 38 kW System description: • in the front area, ceramics are printed via a rotary indexing table • they are then transported via a shuttle into the approx. 20 meter long continuous furnace Pedpfxswbt Ecs Ah Hsgg • temperature: 120 °C • at the end of the furnace, the ceramics are removed and sorted back into the magazines

Condition: used, Year of construction: 1997, Technical Data: Pgodpfeyfnrwjx Ah Hog Year of Manufacture: 1997 Brand: Johannsen Manually operated machine, mobile on steering castors The machine is powered up and can be inspected by appointment! Max. working width: 650 mm Max. clearance height: 40 mm Min. clearance height: 0.5 mm Set feed height: max. 40 mm Workpiece length: 500 mm - unlimited Working height: approx. 900 mm Drive power: 0.75 kW Feed speed: approx. 7.9 m/min Operating voltage: 400/230 V, 3Ph / N / PE 50Hz Accessories/Special equipment: Underside film application Infeed roller conveyor 650 x 1200 mm, mobile, with omnidirectional rollers and adjustable lateral roller stop, non-driven Outfeed roller conveyor 650 x 1200 mm, mobile, with rubber-coated rollers, driven Machine frame (welded steel construction) equipped with all necessary safety devices. Safety light curtains at infeed and outfeed – easily accessible for film threading 1 standard upper film unwinder Feed direction from right to left Operator side left in feed direction For film with a tendency to crease, a spreading roller (available at extra cost) must be used.

Condition: used, Year of construction: 2017, machine/vehicle number: A1711012, Pos.1 VEN CLEAN Smart dedusting systemCompressed air dedusting for cleaning the workpieces to be painted from dust on profiled workpiece surfaces. Five rotating blowing stars are installed. These remove the dust from the surface. The loosened dust is extracted on both sides by suction shafts. on both sides. An external extraction system is required on site. Technical data: Roller transport length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h To be provided by the customer Compressed air consumption: 980 Nl/min. Ionisation as nozzle bar, not EX) with compressed air nozzles, Compressed air consumption 840LN/min. Pos. 2 Automatic spray gun VEN SPRAY Comfort- Manufacturer Venjakob - Type. VEN SPRAY Comfort CNC 7000 - Year of construction 2017 - Working height approx. 930mm+-20mm - Working width 1300 mm - Operating side left - Price for overhauled machine - Actual condition, machine not overhauled - Gun drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 7,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2-6 m/min - With belt cleaning system with doctor blade in tungsten carbide design - With option to install a second beltcleaning system. Software and electric parts inside. - Gun control, touch screen CNC7000 - Installed colour circles 1 pc. (optionally more possible) - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet, free-standing - Length: 4.350 mm + (2,060 mm) - Width: 3.540 mm - Height: 2.600 + 440 mm - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, in stock Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. Pgjdpfx Aeu U Ryyjh Hog For further information, get in touch with us!

Condition: new, functionality: fully functional, BINKS MX 30/70 – Air-operated airless / air-assisted industrial pump The BINKS MX 30/70 is an advanced air-operated industrial pump from Binks' MX series, developed for demanding surface treatment applications. The pump utilizes patented magnetic valve technology, which ensures rapid switching and very low pulsation for uniform material flow and high-quality finish. Podpjyfucisfx Ah Hegg The ceramic-coated piston rod offers exceptional wear resistance and up to 3× longer service life when handling abrasive materials. Features: Pressure ratio: 30/70 Very low pulsation Air-operated, robust construction Long service life and minimal downtime Typical applications: Corrosion protection, steel structures, pipes and tanks, maritime, vehicle and chassis manufacturing. Suitable for both solvent- and water-based coatings, epoxies, polyurethanes, and zinc-rich primers.

Condition: new, functionality: fully functional, BANDO Buffalo 45:1 Paint Pump – Stainless Steel Version The BANDO Buffalo 45:1 is a powerful and reliable paint pump made of stainless steel, designed for professional industrial applications. The pump is suitable for handling lacquers, paints, coatings, and other high-viscosity materials where stable pressure and uniform flow are crucial. Its stainless-steel construction ensures high resistance against wear and corrosion, providing long service life and low maintenance costs – even in demanding production environments. Features and Benefits: Pedpfxjyft U Ro Ah Hegg 45:1 pressure ratio – powerful and efficient material supply Stainless steel design – ideal for lacquers and aggressive materials Stable and consistent operation Suitable for professional spraying and coating systems The BANDO Buffalo 45:1 is the obvious choice for companies demanding high quality, durability, and dependable performance.

Condition: used, Year of construction: 2000, machine/vehicle number: A 00 12 006 / 0100, with new ASCOM gunl control, PLC, light curtain, and touch panel, mounted at the inlet of the automatic sprayer. - Manufacturer: Venjakob - Type: VEN SPRAY Duo - Retrofit 2026 (year of manufacture: 2000) - Working width: 1300 mm - Right-hand operation - Price for reconditioned machine - Current condition, in the reconditioning phase - Duo pistol drive - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system Podpfx Asx Ihvpoh Hegg - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The photos show only one example of a refurbished automatic sprayer. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2002, machine/vehicle number: A0207001, -with belt cleaning at the machine outlet under a folding table with belt conveyor. In 2021, the PLC control, the touch screen control, and the frequency converter for the spraying-gun drive were replaced. - Manufacturer: Venjakob - Type: HGS-Duo/C - Retrofit 2026 (year of manufacture 2002) - Working width 1,300 mm - Operating side right - Price for refurbished machine - Current condition, in the refurbishment phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The pictures are examples of an unrefurbished spray machine of the same type. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. Pedpfsx Ihvvox Ah Hogg For further information, get in touch with us!

Condition: used, Year of construction: 2000, machine/vehicle number: U03 04 005/0100, In 2019, the PLC control system, the touch screen control, and the frequency converter for the gun drive were replaced. - Manufacturer: Venjakob - Type: VEN SPRAY HGS-DUO-Z - Retrofit 2026 (base machine built in 2000) - Working width: 1300 mm - Spray booth width length 2,400 mm instead of 2,166 mm - Right-hand operating side - With dust extraction at the machine inlet - Price for reconditioned machine - Current condition, in the reconditioning phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 7,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed 3-10 m/min - With belt cleaning system - With paint recovery via V-belt system - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump Podox Ihvijpfx Ah Hsgg - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Total connection ~ 15kW - Length: 6,300mm - Width: 3,550mm - Height: 2,540mm - Volts, Hz 400 / 50 - Color RAL 7035 light gray/black - Location, in stock - Voltage fluctuations max. +/- 5% The image shows only one example of a refurbished automatic sprayer. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: good (used), Year of construction: 2000, Dimensions (L/W/H) 2300 x 700 x 1300 mm Air consumption 3500 m³/h Pgodpfxexr Rbms Ah Hjg Motor output 1,5 kW weight of the machine ca. 150 kg

Condition: used, tank capacity: 630 l, GENERAL Pgodpfx Ajyci Sysh Hog Equipment: Disc valve Design: Container Remarks: Frame, steel (galvanized); container made of 1.4435 (V4A) with plastic inner lining Overall width: 830 mm Overall height: 1,450 mm Overall length: 1,550 mm Max. overpressure: 0.2 bar Location: Bremen Nameplate: Vacuum: 0.2 bar Volume: 630 liters Product-contact material: Halar E-CTFE coating Condition: used Last application: Pharmaceutical industry TANK Max. permissible operating temperature: 80 °C Bottom: Conical bottom Mounting style: Mobile on castors EQUIPMENT Manway / Dome: in the top (DN 400) Outlet: 250 mm Note: Signs of wear

Condition: used, tank capacity: 630 l, GENERAL Equipment: Disc valve Design: Container Remarks: Frame, Fe (galvanized); container made of 1.4435 (V4A) with plastic inner coating Overall width: 830 mm Pedpfxjyci Sgo Ah Hegg Overall height: 1,550 mm Overall length: 1,550 mm Max. overpressure: 0.2 bar Location: Bremen Nameplate: Vacuum: 0.2 bar Volume: 630 liters Product-contact material: Halar E-CTFE coating Condition: used Last application: pharmaceutical industry TANK Max. permissible operating temperature: 80 °C Bottom: conical bottom Support type: mobile frame EQUIPMENT Manhole/dome: on top head (DN 400) Outlet: 250 mm Note: signs of use

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table width: 2,600 mm, table length: 4,000 mm, complete for sale or in sections: Psdjtwn Ipjpfx Ah Hogg CLEAR Coat TOUGH Coat ProfiTech controll EPG Spint High Coat PEA-C4 with CoronaStar colour powder coating flat material Glass size max.: Length 3600mm x width 2600mm. 90m long with installed 1100 kW power 2 tilting table, light handling crane, vertical washing machine, powder booth for coating flat material, demi water plant and so on Pos. 1 Loading Station with Lifter Pos. 2 Vertical Inlet Transport WM Pos. 3 Vertical Washing Machine with Drying Pos. 4 Vertical Inspection Transport with Activation Section Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Pos. 6 Pre-Heating Section Pos. 7 Powder Section with Belt Cleaning Pos. 8 Cleaning Transport Pos. 9 Gel Oven Pos. 10 Alignment Oven Pos. 11 Laminator Pos. 12 Cure Oven Pos. 13 Cooling Section Pos. 14 Tilting Table with Vertical and Horizontal Transport Pos. 15 Vertical Inspection station Pos. 16 Unloading Station Pos. 17 Electrical Distribution Pos. 18 Demi-water plant for the supply of the washing machine

Condition: like new (used), Year of construction: 2012, functionality: fully functional, total width: 2,600 mm, total length: 4,000 mm, Pre-heating - WAGNER Powder Spray Booth Wagner - cleaning Wanzer S-PTG-004 Pre-Heating - before spray booth - and after Cleaning - and Gel furnace built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Ask the drawing S-PTG-004 built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Gel oven: Only infrared radiators from Excelitas Nobelight (formerly Heraeus Nobelight) 400 V, 15000 W, heated length = 2,900 mm with a quantity of 12 units are installed here. Additional heating by metal tube heaters is not used here. Alignment oven Only metal tube radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 1 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Pgedpfxevy Ebhe Ah Hsg Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 2 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here.

Condition: good (used), Year of construction: 2020, KODAK ACHIEVE T400 Type: Thermal CTP Platesetter The KODAK ACHIEVE T400 is a dependable thermal CTP platesetter based on Kodak TH5 thermal imaging technology, engineered for cost-effective, stable, and high-quality imaging of digital offset plates. Its compact design and flexible plate size range make it suitable for print operations of various scales. Technical Specifications (excerpt) Imaging technology: Kodak TH5 Thermal Imaging Pgedpeydpukjfx Ah Hog Resolution: 2400 / 1200 dpi Screen ruling: up to 200 lpi Plate formats: – Minimum: 267 x 215 mm – Maximum: 838 x 990 mm Productivity Standard configuration with S-Speed option Output capacity up to 21 plates per hour (depending on plate type and format) Manual plate loading and unloading as standard Workflow compatibility Integration with Kodak workflow systems, including Kodak PRINERGY Workflow Supports Direct and 1-Bit TIFF files Compatible with third-party workflow systems using 1-Bit TIFF Multilingual user interface Automatic recovery functions to minimize operator intervention Image quality and stability Consistently high and repeatable image quality High stability thanks to Kodak TH5 imaging technology Fewer plate remakes and reduced prepress adjustments needed Sustainability Compatible with process-free Kodak SONORA XP plates Reduced chemical usage and lower water consumption Lower operating costs and environmentally friendly operation Scope of delivery – KODAK ACHIEVE T400 Platesetter – S-Speed configuration – XPO TDL Software Optional equipment Automatic plate unloading into processor or stacker post-imaging Manual plate loading supported Optional extended unload table and plate rotation options available upon request

Condition: used, 450218 Pneumatic-driven piston pump, * No. 1: K. Schmidt Type DC 30.20/4, * No. 2: BEDE AIRLESS, max. about 36 l/min. Psdjlf H S Ujpfx Ah Hjgg

Condition: good (used), Year of construction: 2010, 271 USED Heuft Thermal Oil Ovens, Vulkan model + Concord loading/unloading system. Year of manufacture: 2010. EQUIPMENT: - 4 VTR ovens, 12.8 m² each, totaling 50 m², - 1 trolley oven for 3 trolleys, 80x60, 8 levels, Pgedpfx Ahjydfzgj Hjg - Concord loading/unloading system, - dough loading station, - automatic bread unloading station (after baking), - conveyor belt for transporting bread to packaging, - 6 proofing trolleys and plates, - 12 baking trolleys, - HK 400 heating boiler, - thermal oil system, - heating oil, - set designs. Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 43,000 mm, total height: 3,800 mm, total width: 20,000 mm, type of input current: three-phase, workpiece weight (max.): 200 kg, compressed air connection: 9 bar, workpiece height (max.): 2,400 mm, workpiece length (max.): 7,200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE – Complete Powder Coating Line 7.2 m, year of manufacture 2015, in very good condition. Complete setup for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating applications. Machine in perfect working order. Year 2015. Surface Treatment Booth (made of 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters, rinse tanks, effluent tank, dosing pumps, reverse osmosis unit, water softener) Drying oven (gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction Curing oven (gas burner, control cabinet) Structure with manual overhead conveyor: 3 transfer trolleys with 3 lifting beams (200 kg per beam) Pgedpfx Ahsyc S Hts Hsg 2 lift stations for loading and unloading parts 36 lifting beams in total Operation with 3 beams simultaneously Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Maximum part length: 7200 mm Maximum part height: 2400 mm Maximum part width: 500 mm (configuration for 1000 mm width possible) The line is to be dismantled and removed on site Price: €150,000 (excl. VAT) If you have any questions or need further information, please do not hesitate to send us a message or call us. Viewing is possible.

Condition: excellent (used), Year of construction: 1999, GLATT GPCG 120 Fluidbed Dryer/Spray Granulator This universally applicable plant is designed for drying, moistening and spray granulation with batch sizes up to 420 liters. Discharging is done by means of a Glatt EL 300 lifting and discharging device with Glatt GS screening machine. Accessories: Mobile weighing Mettler Toledo and WIP plant. Manufacturer: Glatt Year of construction: 1999 Pgedpfx Ahsvdrcas Hog Shock proof up to 4 bar.

Condition: new, Year of construction: 2025, POWDER COATING SYSTEM FOR CAR WHEELS AND RIMS Oven contains 4 pieces of 22’ wheel rims in 1 batch COMPONENTS OF THE PLANT: * 1.5x1x1.3m POLYMERIZATION OVEN, 18KW ELECTRICAL * VFK-2 ONE-SIDED POWDER COATING CABINET * OVERHEAD CONVEYOR AND LOAD TROLLEYS Delivery: 6-8 weeks EXW Istanbul factory Assembly and training included We offer the best technical solutions and competitive prices Psdpfevv Rfdex Ah Hjgg Contact us for more information and quotations

Condition: new, Year of construction: 2025, VG1E-VN MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM The powder coating system is designed for powder coating applications with frequent color changes during the day. The equipment is on a wheeled stand for ease of operation. Powder coating is sucked directly from the powder box, which allows rapid color changes. The powder box is placed on the vibrating table, suction pipe fluidizes the powder coating in the box, ensuring effective mixing, and the powder coating is homogeneously sent to the gun through an injector placed on the suction pipe. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 55 Kg VG4 CONTROLLER AND MANUAL POWDER COATING GUN The VM manual powder coating gun is completely dismountable. The ergonomic gun handle design ensures ergonomic handling and does not tire the operator during coating application. The high voltage cascade has a long service life, its tightness prevents contact with dust and minimizes the risks in this area. The well-designed head assembly and nozzle ensure excellent polarization and homogeneous coating on surfaces during application. The electronic touch panel on the back of the gun provides ease of use during operation. The control unit is digital and allows precise adjustment of settings via the touch panel. TECHNICAL SPECIFICATIONS Gun Type : Corona System Polarization : Negative Cascade input voltage: 0-10,5V DC Output voltage : 100 kV Output current : 0 -150 μA Powder output (3,5 bar) 500 g/min Protection class : IP 54 Voltage cable length : 5 m Powder hose length : 5 m Pgodpfx Ajvv N Tysh Hsg Gun weight (gross) : 450 g Operating temperature :-20-50 ° C Nozzle :Flat jet or Ø16-20-24mm deflectör

Condition: used, Used APV Anhydro model PSBD 58 stainless steel spray dryer. Unit rated approximately 50 kg/hour water evaporation rate (depending on product) at inlet/outlet temperatures of 600/140°C. Drying chamber approximately 1600 mm inside diameter x 1800 mm cylindrical height x 1500 mm conical height. Chamber has a safety rupture plate buti is not connected. Outside is insulated and claded by stainless steel plate. Inspection doors 450 x 550 mm. Unit includes (1) top mounted Anhydro nozzle co-current atomiser (could be used rotary atomiser but is not included). Unit includes 2 zones electrical air heater, Herding carbon steel filter, cyclone and ventilator. Electrical switchboard with integrated control panel is included. Has a ....PLC control system. Pgedpfx Asyany Rsh Hjg

Condition: ready for operation (used), Year of construction: 2016, operating hours: 2,615 h, functionality: fully functional, KODAK Magnus VLF large-format thermal plate imager with MCU multi-cassette unit (four cassettes) New TH 7 laser (August 2022) with only 2,615 laser hours Pgsdpfeycwctsx Ah Hog 2400 dpi Z-speed Total imaged printing plates: 395,443 units Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from left to right with Print Console enabled for all RIP software, Dell PowerEdge T330 server

Condition: used, Year of construction: 2018, Technical specifications: Podpewf U Rujfx Ah Hegg Processes: Washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50 Hz + N + PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine at a height of 1.6 m: n/a Vibrations: none Maximum payload: 200 kg Wash tank: 900 l Rinse tank: 900 l Oil separator: 200 l

Condition: used, Year of construction: 2011, total height: 3,900 mm, total length: 48,000 mm, total width: 12,000 mm, space requirement length: 48,000 mm, space requirement width: 18,000 mm, Equipment: cabin, SAMES automatic powder coating system The offer includes the following components: 1. Automatic transport system with a travel speed of 1 m/min and a DEMAG elevator 2. Surface preparation components: - Water treatment system - 3 water tanks - Surface preparation tunnel 3. Dryer with RX500 thermoreactors measuring 5.0 m long and 2.4 m high, along with a control unit 4. Painting unit components: - Spray booth - 2 RFV 2000 manipulators - Powder coating mixing center - Control cabinet - 6 powder applicators - PVV recycling kit - Filter unit - Filter press Podpfx Ajwcfppjh Hogg - Tanks for the powder coating mixing center - Fire extinguishing unit - Paint shop control system 5. RX500 thermoreactor oven measuring 9.0 m long and 2.4 m high, along with a control unit