Used Thermal Spray Coating for sale (5,129)

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm Fsdpsym Rvbefx Aa Eefw drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Condition: new, Year of construction: 2025, The BUMEX SP. Z O.O.company presents a powder coating booth. working dimension: 4500x2300mm 6 x polyester filter Automatic filter cleaning with adjustable range from 10-1200 sec. 2 x fan 2.2 kW, 10,500 m³/h (Total 21,000 m³/h) 2 x LED lamp Delivery time 14-21 days Our cabins are characterized by a very high quality of workmanship, safety of use and selection of cabin parameters to the existing building. We advise on the selection of paint booths, dust extraction systems, exhaust systems and industrial recuperation. CHOOSEBUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. are WE certified. mdvncpiz We offer our own transport - prices are set each time for a given offer. We issue VAT invoices. e.g Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Ffodpsd S N Scjfx Aa Eow Feel free to contact us.

Condition: new, Year of construction: 2025, type of input current: three-phase, overall weight: 450 kg, total height: 2,500 mm, total width: 4,200 mm, Equipment: lighting, The BUMEX SP. Z O.O. company presents a powder coating booth. Working Dimension: 4 000 x 2 200 mm 5 x filter Automatic filter cleaning with an adjustable range from 10-1200 sec. Fan 2 x 2,2 kW, 9.500 m³/h=19.000m³/h 2 x LED lamp Delivery time 14-21 days Our cabins are characterized by a very high quality of workmanship, safety of use and the selection of cab parameters to the existing building. We advise on the selection of spray booths, dedusting systems, exhaust systems and industrial recuperation. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. Fodpfx Aaehfwy He Esfw We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. E.g. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 018-2310-0001, Sono TEK ultrasonic spray coating system with conveyor belt or workpiece carriage - 6-head spray system - Was set up for anti-fingerprint / hydrophobic spray coating for display glass, but has seen little use as product launch was postponed - Conveyor approx. 2 m - Flexible gantry design, allowing spray width to be easily and precisely adjusted - Siemens Simatic touch panel - Commissioning / installation support can be provided - Documentation available Ffjdoyl Rr Hopfx Aa Ejw System is dismantled and ready for transport.

Condition: new, Year of construction: 2026, BUMEX Sp. z o.o. | Industrial Powder Coating Technology A professional, compact industrial powder coating system designed for serial production and demanding workshop applications. Engineered with a strong focus on process stability, structural durability and premium coating quality. A complete solution ready for immediate operation in professional powder coating facilities. Scope of Supply ✅ Powder Coating Curing Oven 1200 × 1500 × 1800 mm ✅ Powder Coating Spray Booth with Filtration System 1400 × 800 × 1400 mm POWDER COATING OVEN — BUMEX INDUSTRIAL STANDARD Technical Data Working dimensions: 1200 × 1500 × 1800 mm Total power: 18 kW Ffsdpfx Aohd Nraoa Ejw Key Construction Features ✔ stainless steel front frame preventing paint peeling at the door-to-frame contact area — long-term durability and premium appearance, ✔ excellent temperature uniformity thanks to an efficient air circulation system ensuring stable curing without overheating or cold zones, ✔ heavy-duty industrial construction designed for continuous operation, ✔ 4 patented BUMEX safety locking systems guaranteeing perfect door pressure, chamber tightness and maximum operator safety, ✔ internal loading trolley and external trolley for ergonomic handling, ✔ optimised airflow circulation ensuring repeatable curing quality. Result: fast heating, stable temperature control and perfectly cured powder coating finish. POWDER COATING SPRAY BOOTH Technical Data Working dimensions: 1400 × 800 × 1400 mm Fan power: 1.5 kW Airflow capacity: 6500 m³/h Premium Equipment ✔ construction made from powder-coated galvanised steel panels providing high corrosion resistance, ✔ 2 × 100% polyester filters mounted in TWIST system — fast installation and removal without tools, ✔ automatic filter cleaning system maintaining constant performance, ✔ highly efficient and low-noise industrial extraction fan, ✔ stable airflow ensuring effective powder capture, ✔ ergonomic working area for operator comfort. BUMEX Standard ✔ CE conformity, ✔ full technical documentation, ✔ manufacturer warranty, ✔ warranty and after-sales service, ✔ professional technological consulting. Commercial Terms ✔ own transport — individually quoted, ✔ VAT invoice provided, ✔ customised configurations and dimensions available. BUMEX Sp. z o.o. We design industrial equipment built for long-term reliability, safety and predictable performance.

Condition: new, Year of construction: 2026, warranty duration: 12 months, total width: 2,300 mm, total length: 1,300 mm, total height: 2,450 mm, type of input current: three-phase, Powder paint booth, suction wall TQ2020 Working dimensions (mm): 2000 (width) x 2000 (height) x 400 (depth) Overall dimensions (mm): 2300 (width) x 2450 (height) x 1300 depth SPECIFICATION: • Fan power 2.2 kW, • Efficiency 10,500 m³/h, • 3 x 100% polyester filter • Filtration degree at the level of 99.9%, • Control panel IP 66, • Automatic filter cleaning Ffjdpfxjd S N Sze Aa Eow • Hermetic lighting IP 65. • Paint tank Booth available immediately (Stock status) CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. brand products are EC certified. We offer our own transport - prices are set each time, for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: new, Year of construction: 2025, conveyor belt length: 3,000 mm, Powder coating set Powder Coating Oven 1500 x 3000 x 1800 mm Powder Coating Booth 2800 x 2200 mm Wagner Paint Applicator Oven/Dryer Technical Specifications: Working dimensions: 1500 x 3000 x 1800 mm with NIKO 24.000 overhead rails • Power consumption: 43 kW • Maximum operating temperature: 220°C Equipment: • NIKO 24.000 overhead rail transport • Convection (Even temperature throughout the oven) • 2 x fans for air circulation Fodpfx Aasguku Ue Eofw • Safety locks for opening and closing. Powder booth: •Working dimensions: 2800 x 2200 mm •Fan power: 2.2 kW •Fan capacity: 10,500 m³/h •Very quiet operation •Automatic filter cleaning •LED lighting Wagner Sprint 2 electrostatic applicator CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products are EC certified. We offer our own transport – prices are determined on a case-by-case basis, based on each offer. We issue VAT invoices. Short lead times! Machines in various, customized configurations and sizes are available! Contact us today.

Year of construction: 2025, condition: new, A conformal coating machine is an industrial device used in electronics manufacturing to automatically apply a protective conformal coating to printed circuit boards (PCBs). This coating shields sensitive electronics from external influences such as moisture, dust, chemicals, corrosion, and temperature fluctuations. The machine applies a thin, uniform protective layer to selected areas of the PCB. This process is fully automated and reproducible, which is essential for quality and reliability in serial production. Ffedpoydnlhefx Aa Esw Transport System Transports PCBs through the machine (inline or stand-alone). Coating Application Depending on the configuration: - Spray coating (selective or full coverage) - Jet coating - Film or mist application techniques XYZ Positioning and Motion System Provides precise control of the spray valve. Vision and Camera System (optional) For alignment, inspection, and process monitoring. Masking / Selective Coating Protects connectors, test points, and other areas not to be coated. Drying or Curing Module For UV, thermal, or air curing, depending on the coating material. Control Software Programmable for various PCB designs and coating recipes. Suitable Coatings - Acrylic - Polyurethane - Silicone - Epoxy - UV-curable coatings Applications ICT conformal coating machines are widely used in: - Automotive electronics - Industrial control systems - Medical equipment - Aerospace - Consumer electronics Advantages - Consistent and high coating quality - Reduced material waste - High repeatability - Suitable for mass production - Improved reliability and lifespan of electronics

Condition: new, Year of construction: 2025, The perfect paint set for car rims, motorcycle frames or other smaller things with a rail system and trolleys. Powder coating oven 1500 x 1500 x 1800 mm Powder coating booth 2000 x 1800 mm Oven / Dryer Technical data: Ffodpfx Aaod S N R Ue Eow Working dimension 1500 x 1500 x 1800 mm • Power consumption: 20 kW • Maximum operating temperature: 230 ° C Equipment: • Trolley inside, • Outdoor trolley, • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. Powder cabin: Working dimensions: 2000 x 1800 mm 2.2 kW fan power Fan capacity 10,500 m³ / h Very quiet operation Automatic filter cleaning CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, functionality: fully functional, Year of construction: 2025, Powder Coating Booth + Manual Powder Coating Spray Gun Height: 250cm The number of filters is increased according to the project Advantages of the Paint Booth Ffsdpov Nvkfofx Aa Eow The use of paint booths offers many advantages to businesses High Paint Quality: Working in an environment protected from dust, dirt and other external factors results in a smoother and more aesthetic surface. Energy Efficiency: Modern paint booths have energy-saving features. This reduces costs and provides an environmentally friendly solution. Work Safety: Employee health is protected by expelling harmful gases and particles that may occur during paint applications. Compliance: Paint booths make it easy to meet industry quality standards.

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 700 mm Measurements depth 1054 mm Measurements height 978 mm Machine weight 197 kg This Thermal Dynamics UltraCut 200 was manufactured in 2012. It features a robust output current range of 10-200 A and a duty cycle of 100% at 200 A, ensuring continuous operation. The cutting capacity on mild steel reaches up to 40 mm with a maximum edge start of 65 mm. It includes a liquid-cooled XT-300 precision torch and a DFC-3000 digital gas console with touchscreen. For more information about this machine, please reach out to us. Application Types Cutting Ffodjx D Ixaepfx Aa Eew

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Ffsdeya Hvqopfx Aa Eew Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. Ffjdpfxoxa H Ews Aa Eew If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS Fjdpfx Aewzmcbsa Ejfw After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. Fodpowzl Hxofx Aa Eefw * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% Fsdpjwfgbrsfx Aa Eofw ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: as good as new (ex-display), High definition HD generator for plasma cutting. New never used from stock. Ffsdeg Tcufjpfx Aa Eow Ready for delivery except sold. Bargain.

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Thermal Arc, TIG welding machine, inverter welding machine type LS-300 -Welding power: max. 300 A -ground cable -Dimensions: 410/210/H435 mm Fsdpsx Hwcvofx Aa Eofw -Weight: 21.1 kg

Condition: used, This listing is for the Perkin Elmer Sciex Turbo Ion Spray Source The unit is in full working condition and is ready for immediate use Ffsdpfexhfc Rsx Aa Esw What Is the PerkinElmer Sciex Turbo Ion Spray (Turbo V) Source? The Turbo V Ion Source (commonly referred to as Turbo Ion Spray Source) is a highly robust and efficient ionization module for LC‑MS/MS systems, originally developed by PerkinElmer and further advanced by SCIEX. Here's a breakdown of its key features and function: Ionization Modes Electrospray Ionization (ESI): Uses a TurboIonSpray® probe. High-voltage spray creates charged droplets, while two heated nitrogen gas jets—in an orthogonal configuration—enhance desolvation by intersecting the spray at ~90°, leading to efficient ion generation. Artisan Technology Group Atmospheric Pressure Chemical Ionization (APCI): Employs a different APCI probe. The sample is nebulized, vaporized via a heated ceramic tube, then ionized via a corona discharge near the orifice. Design and Performance Highlights Iconic orthogonal spray design with simplicity and durability. Uniform temperature distribution and optimized curtain gas flow contribute to its high ruggedness and low maintenance needs. Robustness & Productivity The design supports multi-day stability, with studies showing

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ Fsdpfewfhu Hjx Aa Eefw ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Year of construction: 1985, condition: used, machine/vehicle number: 60802 A 17983 J, cutting circuit: bis 400 A Fjdpfx Aj Sdrfja Ejfw space needed: 820 x 1220 x 930 mm weight: 750 kg

Year of construction: 2018, condition: new, FireMaster Morgan Thermal Ceramics FireMaster® Marine Plus FM-MP69/16X14640X610S SUPER DISCOUNT! 19 Euro pallets available 16 boxes on each euro pallet x 19 euro pallets = approximately 304 boxes Material dimensions: Thickness 13 mm Width 620 mm Length 14,640 mm Ffsdpfxoh Rawus Aa Eow Density kg / m3: 96 Price per box 100 EUR + VAT In total there are about 304 boxes. Total price 30,400 Euro + VAT, negotiable , FCA: Satu Mare / Romania Manufactured from FireMaster® Plus fibre, FireMaster® Marine blanket is a highly insulating blanket especially developed for fire protection Plus applications that are very space or weight sensitive Classification temperature FireMaster® Marine Plus blanket: 1200°C (2192°F) Fire reaction properties Non-Combustible in accordance with IMO FTP Code Part 1 Index < 0.5 when tested in accordance with UK MOD Defence Standard 02-713 Class A1 Reaction to Fire in accordance with EN 13501-1 Thermal insulation performance Thermal insulation at ambient temperatures R Values (m² K/W) and corresponding U values (W/m²K). For densities above 80 kg/m³ the values for 80 kg/m³ may be used Basis Thermal conductivity measured at 10°C using BS EN 12667 method 48 kg/m³ 0.0321 W/mK 64 kg/m³ 0.0319 W/mK 70 kg/m³ 0.03164 W/mK 80 kg/m³ 0.03144 W/mK Thermal conductivity at high temperatures Thermal conductivity (W/mK) at mean temperature measured using ASTM C201 method Please check the attachment with the technical data. We reserve the right to make mistakes, changes and prior sale Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, total height: 982 mm, total length: 4,000 mm, total width: 1,100 mm, volume flow: 18,000 m³/h, warranty duration: 12 months, Extraction wall with 18,000 m3/h Max. power consumption 5 kW/h Electric motor 4 kW Fodpowz Ic Nofx Aa Esfw Air unit 18,000 m3/h Nicotra ADH 400 The full description can be found in the attachment to this listing.

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Ffjdpfexa Hzxox Aa Esw Do you have questions or suggestions? We are happy to assist you!

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Ffedpfxexa Hx Rs Aa Eow Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.