Used Spray Gun for sale (2,752)

Condition: used, pressure 3 - 6,5 kg / cm² bar rate of flow 26 l/min diameter of die - min./max. -- mm Gsdpfx Anegvklijkeub Ratio 73 : 1 rated current 1,65 KW weight of the machine ca. 100 kg dimensions of the machine ca. 730 x 760 x 1200 mm noise level 78 dB(A)

Condition: good (used), Year of construction: 2005, functionality: fully functional, B-Tec model m-800 Year of construction 11/05 55kg net weight Dimensions in mm approx. 1600x750x580 Gsdpfxort Rmns Ankoub Washroom dimensions: 570 × 470 × 520 mm 1 × tank for circulating medium Tank size max. 60 L 1 × container for fresh medium. Tank size max. 30 L 6 bar operating pressure --Sale on behalf of the customer----

Condition: used, Year of construction: 1997, rate of flow 34 l/min 28 : 1 7 bar Guodpfxod Ih R Hs Anksb

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Gujdpfxjy Rflys Anksb Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: used, This listing is for the Perkin Elmer Sciex Turbo Ion Spray Source The unit is in full working condition and is ready for immediate use What Is the PerkinElmer Sciex Turbo Ion Spray (Turbo V) Source? The Turbo V Ion Source (commonly referred to as Turbo Ion Spray Source) is a highly robust and efficient ionization module for LC‑MS/MS systems, originally developed by PerkinElmer and further advanced by SCIEX. Here's a breakdown of its key features and function: Gsdsxhfc Repfx Ankjub Ionization Modes Electrospray Ionization (ESI): Uses a TurboIonSpray® probe. High-voltage spray creates charged droplets, while two heated nitrogen gas jets—in an orthogonal configuration—enhance desolvation by intersecting the spray at ~90°, leading to efficient ion generation. Artisan Technology Group Atmospheric Pressure Chemical Ionization (APCI): Employs a different APCI probe. The sample is nebulized, vaporized via a heated ceramic tube, then ionized via a corona discharge near the orifice. Design and Performance Highlights Iconic orthogonal spray design with simplicity and durability. Uniform temperature distribution and optimized curtain gas flow contribute to its high ruggedness and low maintenance needs. Robustness & Productivity The design supports multi-day stability, with studies showing

Condition: used, Spray enclosures, Paint fume, Used equipment Gedpfx Anew Tt Tvekoub Manufacturer: Kematechnik Type: IM-SZ-1,5-4000 Overall dimensions: Width: 1500 mm Depth: 2550 mm Height: 2230 mm Year of manufacture: 2017 Airflow capacity: 4000 m³/h Motor power: 2.2 kW

Condition: good (used), KÖHLER Corrosion Test System HK-400 Manufacturer: KÖHLER Type: presumed HK-400 Control System: ADWEST KÖHLER PC102 Marking: SSK_Köhler_0400-01 PN: 1356 For sale is a KÖHLER corrosion test system suitable for salt spray, condensation, and corrosion tests in industry, research, development, and quality assurance. The unit is designed for testing components, coatings, metal parts, and technical assemblies under corrosive environmental conditions. Visually, the system corresponds to a KÖHLER HK-400 model for salt spray and condensation testing. Technical specifications: Test chamber volume: approx. 400 liters Internal dimensions: approx. 1020 × 750 × 500 mm External dimensions: approx. 1970 × 1050 × 600 mm Temperature range: ambient +10 °C to approx. +55 °C Voltage: 220 V / 50 Hz Guedpfx Asy N R Tajnkob Equipment/features: ADWEST KÖHLER PC102 control system Digital display unit Stainless steel test chamber Viewing window in the door Multiple test grids / shelves Integrated pressure gauges Connections for test media supply Industrial-grade construction Possible test procedures: Salt spray testing Condensation water testing Kesternich corrosion testing Corrosion testing on coatings and metal parts Automotive and industrial test applications Condition: Used equipment with signs of age and use. Visual condition as shown in the pictures. Important note: The original manufacturer's nameplate was not present on the unit. The technical data was compiled based on existing markings, pictures, and comparable KÖHLER HK-400 manufacturer information. Scope of delivery: System as shown All included items according to the pictures. Other notes: Inspection by appointment is possible. Loading can be arranged. Commercial sale – Sale without warranty. (Specifications subject to change and errors excepted.)

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM Gjdpfehby Rijx Ankeub capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: used, Year of construction: 2007, total height: 2,400 mm, total length: 11,000 mm, total width: 2,400 mm, Colour: White Weight: 5.000 kg Price: On request Max. working width: approx. 1300 mm Min. workpiece length: approx. 300 mm Max. workpiece thickness: 80 mm Air supply spray booth: approx. 12,000 m³/h Extraction: approx. 12,000 m³/h Fan power: approx. 7,5 kW Spray guns: 4 units Gusdpfjy Nxvvox Anksb Traverse system: CNC-controlled with oscillating arms Includes finishing and extractor Assembled dimensions: 7000x4300xH3200mm - Details: - └ Description: Traverse system: CNC-controlled with oscillating arms - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 070139 - Main motor power [kW]: 15 - Max. working pressure [bar]: 120 - Number of spray booths [pcs]: 1 - Options: Spray gun - Voltage [V]: 400 - Current consumption [A]: 32 - Power [kW]: 15.6 - Transport dimensions: 11000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), Parts Cleaning System / Spray Cleaning System Type CM13 2-Tank (Washing + Rinsing) including air knife blow-off Basket Diameter: 1,300 mm (octagonal) Guodpfxjv Tm Aye Anksb Max. load capacity: 1,000 kg Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine. Useful height: 800 mm Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following features: + automatic water refill for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be optionally activated) for small components (= E-spray system) + side channel blower with height-adjustable air knife system (blow-off drying) + steam extraction including condensate return + weekly timer for electric heating + pre-configured for retrofitting an oil separator + media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing) + external cladding with stainless steel sheet + complete system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return flow + stainless steel circulation pumps incl. mechanical seal and soft starter The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 5,000 mm, total width: 3,500 mm, total height: 2,950 mm, inner dimension height: 2,650 mm, inner dimension length: 4,900 mm, inner dimension width: 3,400 mm, Equipment: cabin, Automotive Spray Booth The automotive spray booth is a fundamental device in paint repair technology. It enables painting operations to be carried out in safe and comfortable conditions while minimizing the negative impact on the surrounding environment and the workspace. Specifications: - External dimensions: 5000 (+ air handling unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 700 × 2000 mm - Structure: made of steel sheets - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface Double Ceiling: - External ceiling paneling - Full-surface plenum chamber for air supply Air Exchange System: - Supply system: Guedpfxexnpczo Anksb - Jet turbine 4 kW – 2 units - Airflow capacity: 26,000 m³/h - Airflow system: - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 18,000 m³/h Lighting: - 8 side-mounted lamps - Ceiling lighting: 24 LED tubes Air Heating System: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Filtration System: - Double-layer filtration structure - High-capacity air purification system with filtration efficiency up to 99%

Condition: new, Year of construction: 2026, The illustrative photos show the realizations for the customer of the 4x7 cabin The offer applies only to the painting booth without the preparation area (possibility to purchase a preparation zone at the customer's request) - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance gate: 3000x2600 mm (three wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 16 kW - Floor fully grated - Air supply system: Jet turbine 4.0kW - 2 pieces - Exhaust system: Stream turbine 5.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 8 pcs. Power: 48W - one piece 1000 lumens - Burner Riello 40 G20 95-213 KW Gsdpfer Ha Ehsx Ankjub - The cabin is available in different colors

Condition: new, Year of construction: 2026, A two-zone container divided into a paint shop and a preparation zone -External dimensions: 6058x2438x2591 mm Godpfx Anjnbd Rrokjub -Internal dimensions: 5538x2170x2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Windows: with metal protective mesh - Lighting: 4 led lamps -No assembly required - ready to go - Paint booth wall - fully barred Steering - Automatic from the central block located outside; Power - 380V Supply: Eo3il2moj -Fan - 3 Kw - Flow velocity - 0.7 m/s -Air flow: 9500 m3/h -Recirculation - closed circuit Heating: -Riello 40G20 oil burner -Heating time 10 -15 min dkm3db -Max temperature 800°C Filters - preliminary, paint-stop, cardboard, carbon Security: -Emergency stop -Pressure lock on the door -Temperature monitoring system -Error indication Equipment: -16A socket -Air preparation team - Pneumatic retractor

Condition: new, Year of construction: 2026, A two-zone container divided into a paint shop and a preparation zone -External dimensions: 6058x2438x2591 mm -Internal dimensions: 5538x2170x2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Windows: with metal protective mesh - Lighting: 4 led lamps -No assembly required - ready to go Steering - Automatic from the central block located outside; Power - 380V Gusdsnbd Nbjpfx Ankjb Supply: Eo3il2moj -Fan - 3 Kw - Flow velocity - 0.7 m/s -Air flow: 9500 m3/h -Recirculation - closed circuit Heating: -Riello 40G20 oil burner -Heating time 10 -15 min -Max temperature 800°C Filters - preliminary, paint-stop, cardboard, carbon Security: -Emergency stop -Pressure lock on the door -Temperature monitoring system -Error indication Equipment: -16A socket -Air preparation team - Pneumatic retractor

Condition: new, Year of construction: 2026, - External dimensions: 7200x5200x3800 mm - Internal dimensions: 7100x5100x3100 mm - Entrance gate: 4000x3100 mm (four wings) Gedpfxsm Tv I As Anksub - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 21kW - Seating: inside/outside (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 5,850 mm, total length: 12,125 mm, total width: 5,150 mm, overall weight: 8,000 kg, warranty duration: 12 months, inner dimension height: 5,000 mm, inner dimension length: 12,000 mm, inner dimension width: 5,000 mm, Equipment: cabin, lighting, PAINT BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: ‎ ㅤ- 2x supply fans ‎ ㅤ- 2x exhaust fans Gsdpfxsxm U Exe Ankoub TECHNICAL PARAMETERS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four leaves, reinforced hinges) - An additional BOX 1650 mm x 8000 mm should be included in dimensions – can be placed on either the right or left side. - Structure: galvanized steel frame - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool insulation - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibration and the air surge effect from the main supply duct. Double Roof Design: - Upper outer layer - Inner truss structure with V600 ceiling filter Air Circulation System: - Supply system: Jet turbine 7.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 2 units Air Filtration System: - Pre-filter collects particles larger than 10 μm - Ceiling filter collects particles larger than 5 μm - Floor filter: Paint Stop - Carbon filter Lighting: - Ceiling lights: 52 LED tubes (14 angled fixtures with 4 tubes each) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burner: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating time: 8–15 min (max. 80°C) Optional Features: - Roof-mounted boxes - Insulated roof - Pass-through doors - Water curtain - Color according to RAL palette - Explosion-proof (EX) version available

Condition: new, Year of construction: 2026, -External dimensions: 6058x2438x2591 mm -Internal dimensions: 5538x2170x2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Windows: with metal protective mesh - Lighting: 2 LED panels -No assembly required - ready to go Gsdpfxjnbd Ile Ankjub Steering - Automatic from the central block located outside; Power - 400V Supply: -Fan - 3 Kw - Flow velocity - 0.7 m/s -Air flow: 9500 m3/h -Recirculation - closed circuit Heating - heating supply 12kW Filters - preliminary, cardboard, carbon Security: -Emergency stop -Pressure lock on the door Equipment: -16A socket -Air preparation team - Pneumatic retractor

Condition: new, Year of construction: 2026, - External dimensions: 8125x4650x4600 mm - Internal dimensions: 8000x4500x3800 mm - Entrance gate: 4000x3800 mm (four wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 22kW - Seating: inside/outside (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces Godpjnbdlbofx Ankjub - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 36pcs. - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm Gedey Nax Espfx Ankjub adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Condition: excellent (used), Airless spraying unit Guodpfx Ansy I T Haeksb Brand: GRAO Model: H 32 Hose length: 15 meters

Condition: excellent (used), Spot welding tongs Dalex Guedpfx Asy Inwgenkeb Type 3011/2 Throat depth 250 mm Rated power 2.4 KVA 380 Volt

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 380 V, temperature: 250 °C, heating capacity: 18 kW (24.47 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 800 mm, filter area: 22 m², energy consumption: 22 kWh, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for an individual shipping quote. ✅ Complete Package for Professional Powder Coating ✅ Brand new, unused industrial products ✅ Proton Maschinenbau GmbH is the exclusive authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also inquire about current stock availability. 🔥 PROMOTION ONLY UNTIL 06.06.2026 🔥 Package list price (net): €19,570.00 Promotional discount: 15% = €2,935.50 ➖➖➖➖➖ ⭐ Mini Powder Coating System – MINIPBMAT-2-S COMPLETE STARTER KIT FOR PROFESSIONAL POWDER COATING! With the MINIPBMAT-2-S you receive a compact complete system consisting of an electric powder oven, powder booth, and multicolor powder coating gun set. Ideal for workshops, small production areas, and companies looking to enter professional powder coating with a manageable investment. ☘️ Compact ☘️ Economical ☘️ Ready to Run ✅ Complete package of 3 machines ✅ Powder oven + powder booth + powder gun ✅ Attractive promotional price only until 06.06.2026 ✅ Ideal for small and medium-sized workpieces ✅ Perfect for entry-level, expansion, or small series production ✅ Everything from a single source – with Proton service and Matech quality ➖➖➖➖➖ Package contents: ✔️ 1 x Matech Electric Powder Oven MATOVENB-101610 ✔️ 1 x Matech Powder Booth MATBOOTH.FT.02-S ✔️ 1 x STR-ELITE Multicolor Powder Coating Gun Set ➖➖➖➖➖ Technical Highlights: ♨️ MATOVENB-101610 Electric Powder Oven ✔️ Electric heating capacity: 18 kW Godpswc En Eofx Anksub ✔️ Total power: approx. 19.5 kW ±10% ✔️ Digital temperature control up to 220°C ✔️ Fan capacity: 1,500 m³/h ✔️ Timer function and automatic shut-off 🎨 MATBOOTH.FT.02-S Powder Booth ✔️ 2 polyester filters ✔️ Extraction capacity: 2,800 m³/h ✔️ 2.2 kW extraction fan ✔️ Workpiece guide into the booth ✔️ Suitable for concentrated coating applications within the booth 🔫 STR-ELITE Multicolor Powder Coating Gun Set ✔️ Multicolor version ✔️ AOS Automatic Optimization System ✔️ 4-mode memory function ✔️ Powder coating performance: max. 450 g/min ➖➖➖➖➖ ⚙️ Optional Extensions Available 🎨 Options for Matech Powder Booths: ✅ Nano filter box – enables operation without a fixed exhaust duct ✅ Base frame with sieve powder recovery system ♨️ Options for Matech Powder Ovens: ✅ PID temperature control for precise temperature management ✅ Touchscreen interface and smartphone control ✅ Ramp-heating mode for defined temperature profiles ✅ Storage of process parameters ✅ Weekly & monthly reports at the push of a button ✅ Insert shelf system or workpiece trolley ✅ Upper rail system for the oven ✅ ATEX version of the oven available on request ✅ Double-sided door design / front and rear doors ✅ Cart/trolley for the rail system ✅ Support feet for the rail system ✅ Custom dimensions available on request Rails and carriers are not included in the price. ➖➖➖➖➖ 🚀 Secure the promotional package now! This offer is only valid until 06.06.2026. After that, standard package prices apply. ✳️ We offer various financing models. Please contact us for leasing, hire-purchase, or installment payment options. Request your quote now – get your business ready for professional powder coating!

Condition: excellent (used), Year of construction: 2008, For sale is a salt spray chamber designed for straightforward testing of the corrosion resistance of metal parts and coated surfaces. Within the enclosed chamber, components are exposed to a fine salt mist to reveal corrosion under realistic conditions. The system is clearly arranged and suitable even for users without specialized knowledge. The salt spray chamber is fully functional (still in operation) and in well-maintained condition. Key specifications can be found in the attached images. Gjdpfex Uz Hhjx Anksub

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Gsdpfsv I Akvsx Anksub Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 150 kg, input voltage: 380 V, temperature: 220 °C, heating capacity: 12 kW (16.32 HP), inner dimension length: 1,000 mm, inner dimension width: 1,000 mm, inner dimension height: 1,000 mm, workpiece height (max.): 800 mm, workpiece length (max.): 800 mm, volume flow: 1 m³/h, energy consumption: 16 kWh, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs will be calculated separately depending on the delivery address. Please contact us for an individual transport quotation. ✅ Complete package for professional powder coating ✅ Brand new, unused industrial products ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also inquire about current stock availability. 🔥 SPECIAL OFFER ONLY UNTIL 06.06.2026 🔥 Package list price net: €17,770.00 Promotional discount: 15% = €2,665.50 ➖➖➖➖➖ ⭐ Mini Powder Coating System – MINIPBMAT-1-S COMPLETE STARTER PACKAGE FOR PROFESSIONAL POWDER COATING! With the MINIPBMAT-1-S, you receive a compact all-in-one system with electric powder oven, powder booth, and multicolor powder coating gun set. Ideal for workshops, small production areas, repair services, and companies seeking a cost-efficient, professional entry into powder coating with manageable investment. ☘️ Compact ☘️ Economical ☘️ Ready to use ✅ Complete package with 3 machines ✅ Powder oven + powder booth + powder gun ✅ Attractive promotional price only until 06.06.2026 Gusdpfjv Rb E Djx Ankob ✅ Ideal for small and medium-sized workpieces ✅ Perfect for entry-level, expansion, or small batch production ✅ All from a single source – with Proton service and Matech quality ➖➖➖➖➖ Package contents: ✔️ 1 x Matech Electric Powder Oven MATOVENB-101010 ✔️ 1 x Matech Powder Booth MATBOOTH.FT.01-S ✔️ 1 x STR-ELITE Multicolor Powder Coating Gun Set ➖➖➖➖➖ Technical Highlights: ♨️ MATOVENB-101010 Electric Powder Oven ✔️ Electric heating capacity: 12 kW ✔️ Total power: approx. 14 kW ±10% ✔️ Digital temperature control up to 220°C ✔️ Timer function and automatic shutdown ✔️ Strong insulation: 150 mm 🎨 MATBOOTH.FT.01-S Powder Booth ✔️ 1 polyester filter ✔️ Extraction capacity: 2,500 m³/h ✔️ 1.5 kW extraction fan ✔️ Hanging device for guiding workpieces into the booth ✔️ Suitable for focused coating within the booth 🔫 STR-ELITE Multicolor Gun Set ✔️ Multicolor execution ✔️ AOS Automatic Optimization System ✔️ 4-mode memory option ✔️ Powder output: max. 450 g/min ➖➖➖➖➖ ⚙️ Optional available upgrades 🎨 Options for Matech powder booths: ✅ Nano filter box – operation possible without fixed exhaust ducting ✅ Booth base with sieve powder recovery system ♨️ Options for Matech powder ovens: ✅ PID control for precise temperature management ✅ Touchscreen operation panel and smartphone control ✅ Ramp heating mode for defined temperature profiles ✅ Process parameter storage ✅ Weekly & monthly reports at the push of a button ✅ Insert rack system or workpiece trolley ✅ Overhead rail system for the oven ✅ ATEX version of the oven on request ✅ Double door version / front and rear doors ✅ Traverse trolley for the rail system ✅ Support feet for the rail system ✅ Custom dimensions available upon request Rails and supports are not included in the price. ➖➖➖➖➖ 🚀 Secure your promotional package now! This offer is only valid until 06.06.2026. Afterwards, regular package prices apply. ✳️ We offer various financing models. Please contact us for leasing, hire purchase, or installment payment options. Inquire now – get your business ready for professional powder coating!