Powder plant

Pony Luxury Coating M&K Kombi-2.5

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Gjdpfx Agod Ixadofjua Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: new, functionality: fully functional, power: 45 kW (61.18 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,000 kg, lifting height: 4,095 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3518T – the versatile farm loader with a telescopic boom for demanding tasks Benefits of the H&R 3518T Wheel Loader with a telescopic boom Powerful engine: The Yunnei DEF20CFF4 50 hp engine delivers maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between various attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, and a rearview camera, as well as heating and ventilation. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our wheel loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3518T Telehandler • Fully equipped • Extendable telescopic arm for greater reach • Includes standard shovel (190 cm) and pallet fork • Powerful and versatile • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation • Joystick with electric gearshift for precise control • Additional control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display Gusdpfxeulac To Agfja • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V cooling water preheating for reliable cold start capability and increased engine life. • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Net: €28,660.00 VAT: €5,445.40 Gross: €34,105.40 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 61 hp Emissions class: Euro 5 Lifting capacity: 1800 kg Lift height: 4095 mm (bottom edge of standard pallet fork) Unloading height: 3451 mm (standard bucket tipped out) Wheelbase: 2272 mm Tires: 20.5-70 R16 Dimensions: 4890 x 1870 x 2570 mm Weight: 4220 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Gjdpsfz U S Ejfx Agfeua Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2025, condition: new, ⭐⭐⭐⭐⭐ (5.0) 58 ratings ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ shipping : 30-days delivery ✈️ ✅✅✅Energy class A+++✅✅✅ EXCL. VAT & SHIPPING* ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ Gsdpfx Agsghf R Ujfjua ⭐ Powder oven with gas or diesel heating - BOXLINE 15-3025 ✔️Internal dimensions : 1500*3000*2100 ✔️External dimensions: 1780*4000*2500 ✔️ Volume: 9 m³ ✔️ Heating capacity: 90,300 Kcal/h ✔️ Circulating air flow rate (fan) : 6,800 [M³/H] ✔️ Power of the circulating air fan: 2.2 [KW/H] ✔️ Digital heat control Temperature continuously adjustable up to 220°C ✔️ Sandwich panels Inside: 1mm galvanized steel, Outside: 1mm powder-coated steel ✔️ Adjustable air outlet openings and air circulation channels for homogeneous air distribution ✔️ Adjustable curing temperature, curing time and exhaust fan function ✔️ A beep will sound at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140mm Rockwool. Walls: 140mm (50mm rockwool and 100mm fiberglass) ✔️ Type of heating: Indirect heating ✳️Functional principle✳️ This oven is intended for heating powder coated parts. The paint polymerizes at a temperature of around 200ºC (depending on the type of paint used) and forms a film on the surface of the metal. The temperature control in the oven is carried out by the control unit, which receives a signal from the temperature sensor in the oven. ✳️Oven Body✳️ The body of the polymerization furnace consists of heat-insulating panels that are inserted upright into each other and glued together with a heat-resistant sealant. Conveyor distances to the oven door channels can be left if desired. Optionally, it can be made with pivoting double doors. ✳️Heat exchanger✳️ The heat exchanger is installed in the side part of the polymerization furnace body. The internal structure and materials of the heat exchanger are designed in such a way that the temperature in the furnace can be increased to 230 ° C, and the temperature difference at various points is the allowable ones Heat exchanger manufactured from 3 mm. AISI310 Quality STAINLESS STEEL ✳️Circulation fan✳️ Air circulation in the oven is carried out by four circulation fans with insulated chassis. Blade air propellers are often used in circulation fans. ✳️Digital fully electronic temperature controller✳️ ✳️Exhaust fan✳️ It is used to suck in and blow out the gases produced during the polymerisation of the powder in the furnace. If necessary, the exhaust fan can work continuously after a certain period of time or turn on automatically from time to time. ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. Guodpfx Agerq D Nijfoa The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete Guodpfx Aslxyhfsgfja essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: good (used), BIESSE ARROW ATS 5 AXIS NC1000 MACHINING CENTER Machining head with revolver tool change Gedpfx Ageukcy Ejfoua BH39 drilling machine, 250m3 vacuum pump (this machine had been in operation for 10 years in a woodworking school)

Condition: excellent (used), Year of construction: 2011, Cell with Kuka KR 180 grinding robot Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 - max. belt dimensions 3500 x 30 mm - max. contact pulley diameter 200 mm - motor power 4 kW 2 x polishing stations, - polishing wheel diameter 350 - 600 mm - power 5.5 kW Gripper change cabinet Belt conveyorInteroll Automation GmbH - Total length approx. 2000 mm Guodpjg Saqvjfx Agfea - Belt width approx. 440 mm The price includes a complete concept as you can see on the video We have 4 such cells. It is possible to make every detail as you can see in the video

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Gsdpefz Anpjfx Agfoua ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2024, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, total length: 7,600 mm, total height: 3,000 mm, total width: 2,650 mm, overall weight: 14,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, DYAS 3 BDC CNC Beam Profile Machining Center Operating Range for Section Min. 200 x 80 mm / Max. 1200 x 500 m Operating Range for Length Min. 2000 mm / Max. 12000 mm (Gross: 12500 mm ) Drilling Head (Spindle) 3 Spindle Speed 50-4000 (stepless) rpm Spindle Power 22 Kw Spindle Torque 280 Nm Tool Changer 6 for each spindle , total 18 Tapping Capacity M10-M30 Guodpfsgbdpkox Agfja Bandsaw (Optional) Cutting Speed 20-100 m/min / Mitering Angle +60°/-45°