Used Tester for sale (177)

Condition: used, max. wheel diameter 0-200 mm max. module 25 Ljdetuxa Uepfx Ab Ujah min. module 0,5

Condition: used, machine/vehicle number: 83040, Projection: 150 mm Inspection height: 200 mm Space requirement: 350 x 600 x 1410 mm Laedpfx Aob Dkh Nsb Ush

Condition: like new (used), Here we offer you a weathering tester. The Xenotest Beta+ is a high quality xenon device with a rotating sample carousel and an exposure area of 4000 cm². It has a complete set of parameter control options. Irradiance and temperature are measured and controlled directly at the sample level using XENOSENSIV sensor technology. The Beta+ meets the vast majority of industry standards. Its large test chamber and high reliability make it ideal for larger test volumes or sample sizes. - 3x 2200 W air-cooled xenon lamps - 4000 cm² exposure area - High irradiance testing up to 120 W/m² (2 suns) - Touch screen with color display for monitoring and displaying test parameters - Direct setting and control of irradiance (300-400 nm) - Direct setting and control of black standard temperature - Direct setting and control of chamber air temperature - Direct setting and control of relative humidity - Display of diagnostic messages - Memory for 10 user-defined test methods - Preprogrammed international standard test methods - Multilingual user interface - Non-aging XENOCHROME filters to simulate daylight outdoors, Daylight behind windows - On-rack XENOSENSIVE 300-400 nm for measurement and control of irradiance (in W/m2) and BST (°C) at sample level - Selectable temperature control either via chamber air temperature (max. 70 °C) or via Dual control: chamber air temperature and Schwarz standard temperature (up to 130 °C) Laodpfxeihfrrs Ab Uoh - Fan-controlled temperature difference between chamber and black standard temperature - Ultrasonic humidification system for humidity control - Sample spray system with integrated 60 liter water reservoir - Outer cylinder made of special UV glass - Shutdown after irradiation amount, exposure time or total operating time - Advanced auto-start functions - Data output via memory card or RS 232 interface - Ethernet interface for connection to internal computer network and use of of XenoTouch Add-Ons 1, 2 and 3 (remote control, e-mail service, online monitoring) Dimensions Width x depth x height: 900 x 1200 x 1800 mm Weight: 400 kg Type: Xenotest Beta+ Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Hardness tester functional Lsdpfxjw R Sr Ss Ab Uoah

Year of construction: 1986, condition: used, machine/vehicle number: 80.000.-978, Version A, size 1 Test force: 750 kN Type of force effect: spring load kN pre-force: max.300 kN Projection: 200 mm Test height: 14 mm Voltage: 380/220 V Type of current: 50 Hz Accessories and special equipment: - Brinell-Vickers hardness measuring electronics type 2.802.007 - Glare shield for ground-glass device Space requirement: 360 x 840 x 1250 mm Ljdpol Axc Uefx Ab Uoah Weight approx. 620 kg

Year of construction: 2017, condition: good (used), - Standard deviations: 0.01 g/l - In good condition Lasdswff A Ijpfx Ab Ush

Condition: used, TECHNICAL DETAILS - Brinell tests 3000 Kg and 750 Kg, HB according to DIN EN ISO 6506-01 - Test height with table : 0 - 610 [mm] - Test height without table : 370 - 1.120 [mm] - Clamping surface on table : 500 x 600 [mm] - Clamping surface on sole : 810 x 1.425 [mm] - Reach : 310 - 1.095 [mm] Lodsuhb Iuepfx Ab Uoah - Arm swiveling : 220 [°] - Test group swiveling around its axis : 180 [°] - Vertical stroke of the test group : 750 [mm] - Floor space (except hydraulic unit) : 810 x 2.155 [mm] - Height : 3.500 [mm] - Weight : 4.000 [kg] - Voltage : 3x 400 [V] - Frequency : 50/60 [Hz] - Installed power : 3,5 [kVA] EQUIPMENT - Control panel : Stiefelmayer - Optical measuring system : Zeiss - Measuring electronics HM-Control - 2 measuring rules of imprint size : Heidenhain - Warning lights : good / outside the tolerance range - Statistic function - Exit for PV printing - Table - Hydraulic unit

Year of construction: 2025, condition: as good as new (ex-display), machine/vehicle number: Demo-Impact-300, Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) - potential energy: 300 Joule - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items Ledpfjptcwsx Ab Ueah

Condition: excellent (used), Here we offer you an Erichsen condensation tester. Erichsen condensation water tester HYGROTHERM 529 / 1000 liter incl. control unit and compressed air connection Condensation water tester for standard-compliant condensation water tests HYGROTHERM 529 Purpose and application: The HYGROTHERM 529 condensation water tester is used to test the corrosion susceptibility and climatic behavior of materials and connections according to various standards and and specifications, such as the behavior of protective-treated carrier materials in a constant condensation water climate in accordance with DIN EN ISO 6270-2-CH. The HYGROTHERM 529 condensation water tester is available with a test chamber volume of 1000 liters. The device consists of a control unit (with test hour counter and temperature controller) for wall mounting and a separate double-walled test chamber in rectangular design with rectangular design with pneumatic dome opening. Technical data: Dimensions and weight Control unit Width: 425 mm x height: 530 mm x depth: 200 mm Net weight approx. 20 kg Test chamber 1000 liter (rectangular design) Width: 1800 mm x height: 1350 mm x depth: 1000 mm Internal dimensions. Width: 1500 mm x height: 670 mm x depth: 810 mm Data: Power supply 230/ 400 V three-phase current, 3〜, 50 Hz Net weight: Control unit approx. 20 kg Test chamber 1000 liters approx. 150 kg Power consumption: Control unit: approx. 120 VA Test chamber 1000 liters approx. 2000 VA Heat output of control unit: Test chamber 1000 liters approx. 2400 W Compressed air connection: R 3/8 internal thread 6-8 bar overpressure Type: HYGROTHERM 529 Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Lajdeqbtchopfx Ab Uoh

Condition: like new (used), inclusive extensive Equipment > Enumeration follows Lasdpfxskw T H As Ab Ujh

Year of construction: 1982, condition: used, machine/vehicle number: 1.001.001-052, Type of force effect: Spring force load Initial force: 98 kN Projection: 150 mm Test height: 250 mm Test force: 588 N, 613 N, 980 N,1471 N, 2450 N Voltage: 220 V Type of power: 50 Per Accessories and special equipment: Laedpel Axb Tofx Ab Ush - Holder with diamond cone 120 degrees - Hardness comparison plate HRC - Holder with carbide ball 2.5 mm diameter - Hardness comparison plate HR 2.5/187.5 - Test table 190 mm diameter - prism. Test table for max. 85 mm diameter - Protective cover - Machine table with drawer Required space: 460 x 210 x 840 mm Weight: approx. 100 kg

Condition: new, ATP-1000 tester can be successfully used in companies engaged in turbocharger repair, as well as in car repair services offering a wide range of repair works to determine the cause of turbocharger malfunction. It is also suitable for companies supplying electronic actuators. The tester checks the functionality of the actuator as a whole and its individual elements such as the position sensor and servomotor. Separate diagnostics of each element allows you to accurately determine the condition of the turbocharger actuator and detect a problem, if one exists. The ATP-1000 is easy to use and allows you to quickly check the condition of the actuator and its components. This has made it an effective tool for monitoring the functionality of actuators. HIGHLIGHTS Testing of electronic actuators for turbochargers Programming (adaptation) of SIEMENS electronic actuators Testing of 12V DC motors up to 2A Testing of boost solenoids used in pneumatic systems Testing of electronic and pneumatic actuator position sensors Works with all common types of actuators and similar in principle of operation. Communication protocols: PWM, CAN, ADC, SENT. KEY FEATURES • Protection of the device by current 2A for 3 seconds • Automatic detection of DC motor polarity inside the actuator • Tooltip for color-coding the cable to the selected actuator type • Display position sensor readings as a percentage • Display of additional parameters of HELLA programmable actuators: firmware number, programmed angle value • Portable version for testing directly on the vehicle • USB control of actuators, when working together with the software of GEOMET-2000 turbo flowbenches. • Regular updating of the tester firmware СABLES Set of diagnostic cables for actuators 12 pcs. Lodpfx Abon E S T Uo Ueah Set of diagnostic cables for position sensors 6 pcs. Cable set for uncommon turbines 11 pcs. USB cable 1 pc. Cable AC/DC 12V, 4A power supply 1 pc. !!!! If you are looking for an electronic actuator programmer, ask me.

Condition: used, TECHNICAL DETAILS - Durometer for production line control of soft rubber and elastomers and all natural rubber products. Lajdpfx Asuhb I Iob Ujh

Year of construction: 2021, condition: new, THE classic among the universal hardness testers with swivel system with motorized change between indenter and objective Standard accessories (included in the price): Lajdpfxocw Iyhe Ab Uoh * Hardness testing machine with integrated load cell Load system, optical unit * video measuring system: WINDOWS test software IMPRESSIONS * objetives for 95x and 150x magnification * clamping cap * test table flat Ø 80 mm * Installation and operating instructions * certificate of inspection * incl. action accessories: - ring light for Brinell measurements - ISO / ASTM - certified Vickers and Rockwell indenters plus packaging, transport with commissioning on site plus optional equipment

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement Laodpfx Absf Axn Ae Ueh - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: good (used), Year of construction: 1965, Measuring machine, manual Erichsen cupping testing machine, cupping testing machine, sheet metal testing machine Ledpfsw H N Dlsx Ab Ueah -Manufacturer: Klingenthal -Type: 05 -Sheet metal testing machine: Erichsen cupping, up to 2.0 mm -Accessories: see photos -Dimensions: 460/360/H335 mm -Weight: 20.5 kg

Year of construction: 1997, condition: ready for operation (used), Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation. Laedpfxsm H Uqks Ab Uoh

Condition: excellent (used), Zwick / Roell Zwick / Roell Type HIT5.5P – Pendulum Impact Testing Device For sale is a high-quality, used pendulum impact tester of type HIT5.5P by manufacturer Zwick / Roell. The device is ideally suited for instrumented impact testing according to Charpy and Izod on plastics, metals or composite materials. Device data: Device = HIT5.5P Version = V2.8 HIT Pendulum = 5 J Charpy Current pendulum energy = 5.000 J Friction = 0.017 J Friction reduction = practice swing Laodpswqfnujfx Ab Ueh Impact speed = 2.9 m/s Pendulum mass = 1.19 kg Release angle = 107.46 ° Pendulum length = 330.0 mm Technical data: Model: Zwick / Roell HIT5.5P Max. impact energy: 5.5 Joules Test methods: Charpy, Izod (instrumented) Data acquisition: force-time and displacement-time curves Supply: 230 V / 50 Hz Scope of delivery: Zwick Roell HIT5.5P incl. 5.5 J pendulum Control unit with control panel Power and connection cables Shipping by freight forwarding (pallet shipping) – costs on request Pickup by arrangement in Borken possible. Condition: used (changes and errors in the technical data, information reserved!) We will gladly answer further questions by phone for you.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Klingelnberg ZW 301 Gear Measuring Machine with Evaluation Computer Double-flank gear measuring machine with 4-position indexing table - Spur gear - Internal gear - Gear shaft - Computer (evaluation via industrial PC with fully automatic parameter calculation, quality determination, and classification) Workpiece data: Table load including fixture, max. 100 kg Load on support plate/vertical slide including fixture, max. 80 kg Workpiece knife with counterholder on measuring and feed slide, max. 300 mm Workpiece knife with counterholder on machine bed, max. 300 mm Device data: Heidenhain LIF 101 position measuring system Center distance min./max. 45/300 mm Table diameter 150 mm Ljdpfx Asv Ic R Aob Uoah Table height above floor 950 mm Measuring pressure min./max. 5/30 daN Total connected load of the test device: 0.75 kVA Total space requirement: LxWxH 1900 x 1200 x 2200 mm Net weight: 750 kg PC, as well as some master wheels with common modules. Weight: 750 kg

Year of construction: 2021, condition: new, New universal hardness testing machine with excellent European quality (Netherlands) and a price-quality ratio approx. 1/3 cheaper than the established suppliers. One of the most flexible universal hardness testers / hardness testing machines available on the market with an integrated turret head for holding several penetrators and lenses Standard accessories (included in the price): * Machine body with mot. turret * Linear actuator (lowering test head) * Load cell, closed loop Lasdpfjcw Iy Hjx Ab Ujh * Optical measuring system with up to 3 lenses with 0.7 to 1000x magnification * Optical LED illumination and LED ring light illumination * Laser pointer for exact test position determination * Built-in industrial PC with 15" industrial colour touch screen * Installation and operating instructions * incl. action accessories: - ISO / ASTM - certified Vickers and Rockwell penetrators plus packaging, transport with commissioning on site plus optional equipment

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement Lajdpsd Dc Unofx Ab Ush - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57820 and 57821

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Zwick Roell Pendulum Impact Testing Machine HIT5P Plus incl. TestXpert III software and 2 Charpy pendulums Year of Manufacture: 2019 Dossier number: DO733812 Safety guard, fixed left side • 010924 Lsdpfx Asw H Andjb Ueah TestXpert III Software TestXpert III Basic Program 1035123 TestXpert III Standard Test Program 1035790 Manual Charpy Pendulum 1J BPI-ACPECHI.112 Charpy Pendulum 5J BPI-ACPECHI.115 Performed according to Charpy ISO 179-1:2000 + Amend. 1:2005 German Version EN ISO 179-1:2000 + A1_2005 Dimensions: 680 x 658 x 404 mm (without guard) Maximum working capacity: 5 J Dimensions (W x H x D): 680 x 658 x 404 mm (without guard) Weight (without fixtures) approx. 75 kg Electrical connection: 100 to 240 V, 50/60 Hz, 70 W Interfaces: RS232, USB Angular resolution: 0.018° Test results, numerical Impact energy [%] Impact energy [J; ft lbf] Impact toughness [kJ/m²] Control function: Pendulum vertical position Oscillation duration Pendulum vertical position Oscillation period Correction function: friction correction Impact tensile test: Air and bearing friction, kinetic yoke energy 3.1 Charpy Testing The Charpy blocks consist of a solid cast base. Test-specific parts, such as anvils and supports, are selected according to the specimen spectrum. The anvils, which through surface roughness and radius can significantly affect test results, are fully precision CNC-manufactured and 100% measured. Single-piece anvils, which often lack sufficient dimensional accuracy, are not offered by ZwickRoell. During installation, the spatial position of the anvils relative to the pendulum hammer is ensured by an optional gauge. Anvils are subject to higher wear than supports, but two-piece anvils can be economically replaced independently of other accessories. Quick-change adapter plates allow adjustment of the impact point to the specimen width (impact direction). Adaptation to specimen thickness (vertical direction) is achieved by appropriately dimensioned supports, which are accurately fitted using locating pins. Optional accessories for the testing frame include a pivoting safety shield and alignment units, which position the specimen either at the notch or at one end face aligned to the impact center. Advantages: • Rapid block change • Precision manufacturing and documented 100% dimensional accuracy control of the anvils

Year of construction: 2025, condition: new, Top technology at a fair price! The FALCON 500 series is a new generation of micro-Vickers / Macro-Vickers / micro-Brinell hardness testing machines with an integrated load cell. Lodpfx Abocxvbbj Ujah

Year of construction: 1990, condition: used, Universal hardness testing machine Laedpfxoptcye Ab Ush high-quality general overhaul with guarantee optionally with modernization for Vickers / Brinell / Rockwell with PC connection

Year of construction: 2021, condition: new, Low-priced quality hardness tester for the Rockwell C , B , A methods Analogue dial indicator, manual operation, weight loading system, conform to ISO6506, warranty 2 years Lodpfxsbt Drpo Ab Ueah Rockwell scales: A, B, C, D, E, F, G, H, K, L, M, P, R, S, V Test loads: preload 10kgf, main loads 60 | 100 | 150 kgf adjustable hydraulic damping of the weight loading system Adjustable dial indicator, graduation 0.5 HR - Readability 0.1 HR Units Throat 150 mm Test chamber height 240 mm Standard-compliant Rockwell tests according to EN-ISO 6508, ASTM E-18 Machine weight (net) 126 kg Machine dimensions height 765 mm / width 270 mm / depth 555 mm