Used Tempern Oven Plastic for sale (7,495)

Condition: used, Plastic protectors, collision protection, bollards, polyamide -Full material -Width: 130 mm -Length: 475 mm -Height: 100 mm Bodec Innuopfx Aafecu -Number: 1x saver available -Price: per piece -Weight: 5.2 kg/piece

Condition: used, Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, center bearing design Bedpfxscgdr Se Aafscu -Middle bearing: for Ø 50 mm shaft -made of: plastic -Number: 34x stock available -Price: per piece -Dimensions: 90/70/H85 mm -Weight: 0.6 kg/piece

Condition: used, Plastic protectors, collision protection, bollards, polyamide Bodpfxjc Innvo Aafscu -Full material -Width: 150 mm -Length: 595 mm Height: 74 mm -Drawing with the pictures -Number: 4x savers available -Price: per piece -Weight: 5.6 kg/piece

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ Bsdpsfz I Rxofx Aafecu 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Bodefz Nd Iopfx Aafjcu Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Bsdefx Nfmopfx Aafecu Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 Bcsdofzb Niopfx Aafsu 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Bcsdpfx Aefz U Nbeafju Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Bsdpfx Aaofzccnofscu Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ Bodpfx Aefzb Rcoafocu 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, -12 loading mouths/openings -4 decks -Integrated loader elevator -Operates on wood and gas -Sold with gas burner -With mechanical control Bcodpfx Aex Up Nweafou -Voltage: 400V

Condition: excellent (used), 5,000 pcs. Wezsuisse Euronorm Plastic Box – Container 60 x 40 x 10 cm 🧰 Product Features • Manufacturer: Wezsuisse • Condition: Very good condition, see photos • Material: PP (polypropylene) • Colour: Black • Volume: 22.8 l • Net weight: 1.78 kg • External dimensions: 600 x 400 x 102 mm • Internal dimensions: 555 x 358 x 92 mm • Stackable: Yes • Dimensionally stable: Yes • Euronorm compliant: Yes 💰 Price € 4.90 net excl. VAT Price from 72 pcs: € 4.20 net excl. VAT Bedpfx Aaox Upqzjfscu • Quantity discount: Upon request • Shipping costs: Europe-wide upon request • Delivery time: Immediately available • Viewing and collection: Available anytime by appointment Constantly over 5,000 linear metres of pallet racking from various manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our General Terms and Conditions. All prices excl. VAT ex stock.)

Condition: excellent (used), 3,500 pcs. Wezsuisse Euronorm Plastic Boxes – Containers 60 x 40 x 22 cm 🧰 Product Features • Manufacturer: Wezsuisse • Condition: Very good condition, see photos • Material: PP (polypropylene) • Colour: Black • Volume: 43 litres • Net weight: 2.48 kg • External dimensions: 600 x 400 x 220 mm • Internal dimensions: 555 x 358 x 215 mm • Stackable: Yes • Dimensionally stable: Yes • Euronorm compliant: Yes 💰 Price € 7.90 net excl. VAT Price from 32 pcs.: € 6.50 net excl. VAT • Quantity discounts: On request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: Possible anytime by appointment Constantly over 5,000 linear metres of pallet racking from various manufacturers in stock (Subject to technical changes, errors and prior sale! Please refer to our GTC. All prices excl. VAT, ex warehouse.) Bsdpfx Asx Uphyeafjcu

Condition: excellent (used), 3,500 pcs. Wezsuisse Euronorm Plastic Boxes - Container 40 x 30 x 10 cm 🧰 Product Features • Manufacturer: Wezsuisse • Condition: Very good condition, see photos • Material: PP • Color: Black • Volume: 4.2 l • Net weight: 0.92 kg • External dimensions: 400 x 300 x 102 mm • Internal dimensions: 355 x 258 x 92 mm • Stackable: Yes • Dimensionally stable: Yes • Euronorm compliant: Yes 💰 Price €2.20 net excl. VAT Price for 144 pcs. or more: €1.90 net excl. VAT • Quantity discount: On request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: Possible anytime by appointment Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock Bcodpfx Aex T Df Reafju (Subject to changes and errors regarding technical data, specifications and prices, as well as prior sale! Please refer to our general terms and conditions. All prices excl. VAT ex stock.)

Condition: excellent (used), 2,500 pcs. Wezsuisse Euronorm Plastic Crate - Container 60 x 40 x 42 cm 🧰 Product Features • Manufacturer: Wezsuisse • Condition: Very good condition, see photos Bedpfxjx T Ddge Aafjcu • Material: PP • Colour: Black • Volume: 84 l • Net weight: 4.62 kg • External dimensions: 600 x 400 x 420 mm • Internal dimensions: 555 x 358 x 415 mm • Stackable: Yes • Dimensionally stable: Yes • Euronorm: Yes 💰 Price €8.50 net excl. VAT Price from 16 pcs: €7.90 net excl. VAT • Bulk discount: On request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: Possible at any time by arrangement Constantly over 5,000 linear metres of pallet racking from numerous manufacturers in stock (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex works.)

Condition: excellent (used), 1,000 pcs. Wezsuisse Euro standard plastic crate – container 60 x 40 x 27 cm 🧰 Product features • Manufacturer: Wezsuisse • Condition: very good, see photos • Material: PP • Colour: black • Volume: 54 l • Net weight: 3 kg • External dimensions: 600 x 400 x 280 mm • Internal dimensions: 555 x 355 x 275 mm Bcedpfx Ajx Tz R Rjafju • Stackable: Yes • Dimensionally stable: Yes • Euro standard compliant: Yes 💰 Price €8.50 net excl. VAT Price from 24 units: €7.50 net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Over 5,000 linear metres of pallet racking from various manufacturers always in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our Terms and Conditions, all prices excl. VAT ex stock.)

Condition: used, Year of construction: 2013, Kersting plastic chain conveyor belt conveyor conveyor Inclined conveyor washing GF 3350-720-620 RA1974 Technical data: Bedpfx Aok Abpaoafocu Conveying length (NL): 3350 mm Framework width (NB): 720 mm belt width (GuB): 620 mm Height/band run (BH): from 920 mm to 1250 mm rising +/- 50 mm height adjustment Conveying speed (v m/s): pleas contact us with you needed Speed Drive: DEW- Gearmotor Electrical data: 400 V / 50 Hz / 0,37 kW Belt: plastic chain with toothwheel drive Year of construction: 2013 Special feature / accessories: Drip tray to catch the washing water All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, Working condition reflow oven. Ask for additional information! Bcsdpfex Tq I Sex Aafju

Condition: excellent (used), 612 USED shop oven WP Brilant for 5 trays 60x40. EXTERNAL DIMENSIONS (in cm): - W: 93 - L: 130 - H: 212. EQUIPMENT: - hood - fogging - base with shelves TECHNICAL DATA: - power: 7.5 kW - steaming: 1.5 kW The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Bcjdpfx Aaom Uyimsfju The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN.

Condition: good (used), Plastic protectors, impact protection, bollards, polyamide -Solid material -Width: 123 mm Bcjdec Inn Ajpfx Aafsu -Length: 330 mm -Height: 82/50 mm -Drawing in the pictures -Number: 19 protectors available - Price: per piece -Weight: 2.4 kg/piece

Year of construction: 2007, condition: used, Technical details: control for program: SPS Siemens S7 MULTI-PURPOSE CHAMBER OVEN LINE Bcjdpfewqpm Iox Aafsu Application: for heat treatment of small parts and piece goods, intended for the following heat treatment processes such as -hardening under protective gas -annealing, normalizing, pearlizing quenching of the charge by immersion in a quenching medium (oil) Line consists of: 2 multi-purpose chamber furnaces, type MKG 2s; gas-fired, charge chamber W: 700 x H: 950 x L: 1100mm; 85kW, natural gas 8.0 Nm³/h, safety controller (750°C) 1 piece of switchgear for space automation (signals via Siemens RP modules) 1 piece process control system with full automation Demig 1 electrically heated tempering furnace, type KEL 70/90/110-500°C; size W: 1400 x D: with switchgear 2650 x H: 4100mm, batch dimensions W: 700 x H: 950 x D: 1100mm; loading height 1200mm 1 gas-heated protective gas tempering furnace, type RH 70/95/110 GS; size W: 2800 x H: 4600 x D: 3000mm; charge chamber W: 700 x H: 950 x L: 1100mm, charging height 1200mm, max. working temperature 750°C, 4 burners Krom Schröder a`60 kW 1 flood spray washing machine type BVL 1 charging trolley, electromotive, movable, size W: 1700 x L: 1700 x H: 1800; charging height 1200mm 1 piece charging line for loading and unloading the batch (workstations, scissor lift table) *

Condition: used, Technical details: width: Ø 110 mm depth: ca. 140 mm degree: 1200 °C Bcedpfx Aaju N Agwefeu voltage: 220 V total power requirement: 750 Watt dimension machine xH: 400 x 220 x 320 mm on sale as is! inner lining with Shamrock, shamrook has slightly cracks. i.D. *

Year of construction: 1981, condition: used, Technical details: Bcodpsu N Agksfx Aafeu height over floor: 850 mm total power requirement: 2,5 kw temperature: 200 °C voltage: 220/50 V / Hz weight of the machine approx.: 80 kg space requirement of the machine approx.: L:0,85xB:0,6xH:1,15 m Application area: drying device internal dimensions: W: 0,50 x T:0,42 x H:0,60m door opening : W:500 x H:600mm The internal room does have 3 shelves ( depth 370 x W: 490mm) upper shelf inlet has been taken out, because the thermometer gets deep into the room ( see picture / comparable) Oven has been tested up to 160°, with limitation on sale, 2 heating rods up are OK and 2 heating rods down are not working! *

Year of construction: 2001, condition: good (used), 1 used hardening furnace Manufacturer: Nabertherm, Type N 321 Serial Number: 160897, Bedpfjxpf I Nsx Aafecu Year of manufacture: 2001, Max. temperature: 1,200°C, Connected load: 400V, 47 kW Internal dimensions: 750 x 1100 x 400 mm Usable volume: 320 liters Weight: approx. 1.6 t Dimensions: Length approx. 2 m, width approx. 1.5 m, height approx. 2 m,

Condition: used, Drying Oven Seho GoReflow 1.8. 23101297679 unused 2023 price: €27,842 23101297680 unused 2023 price: €27,842 22081297330 used 2022 price: €14,182 Bjdpfex Tg Rcsx Aafecu 17121296474 used 2017 price: €3,775