Used Table Circular Saw for sale (39,926)

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Rear Lifting table No. 1 Rear pushers Twin Pusher No. 9 clamps Max. cutting width (mm) 3300 Useful stroke of the pushing system (mm) 3300 Max blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max saw diameter / power) 200 mm Ijdpfx Ajp R Sdhsh Njal Main Sawing Unit (max saw diameter / power) 360 mm - Kw 18 Adjustable speed of the saw carriage (m/min) 5 - 120 Front supporting tables with Air blowing system (N.) 3 Total power (Kw) 21 (ca.)

Condition: excellent (used), Panel saw Martin T60, Sliding table 300 cm, Main motor 5.5 kW, Ijdstza Smspfx Ah Neal Right-side rip fence adjustable up to 1250 mm, Tilt motorized adjustment, Up/down motorized adjustment, Max. blade diameter 400 mm, Swiveling side carriage.

Condition: used, Longitudinal circular saw Longitudinal cutting circular saw Iedpfxjq E Ivts Ah Njal Crosscut / Longitudinal circular saw, year 1999 Works from below for lengths up to 4.7 m Material thickness up to 110 mm Also suitable as a traveling saw behind a production line INFO!! For such a new Flender flat circular saw motor 10 kW you pay 4,700 EUR that is, more than at Jöma for the entire machine

Condition: new, saw blade diameter 350 x 32 mm capacity degrees: round 1 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 180 x 95 mm capacity degrees: round 110 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 125 x 95 mm Ijdpexaab Sefx Ah Neal capacity 60 degrees: round .0 mm capacity 60 degrees: square x mm capacity 60 degrees: flat x mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2600x3010x1250 mm Weight 500 kg Isdpfsvz Hlwsx Ah Njal Total power requirement 3,8 kw

Condition: excellent (used), Saw blade Ø: 370 mm Cutting capacity at 90° round: 120 mm square: 100 mm rectangular: 180 x 100 mm at 45° round: 120 mm Iajdpfox Ek A Tsx Ah Nsl square: 100 mm at 60° round: 110 mm square: 90 mm 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Required space: 1000 x 1000 x 1800 mm Weight: 390 kg

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Iajdpfx Aheh Imvho Nsl Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 With clamps / grippers 7 Turning device (rotating unit) at 90° Max. cutting width (mm) 3800 Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 95 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 380 / Kw 13,5 Adjustable speed of the saw carriage (m/min) 1 - 130 Front supporting tables with Air blowing system (N.) 3 (2160mm x 650mm) Total power (Kw) 28 (ca.)

Condition: used, Year of construction: 2001, sliding table length: 3000 mm cutting width at the fence: 1300 mm cutting width at the cross cut: 3200 mm cutting depth: 145 mm scoring unit: Ja height adjustment sawblade: elektrisch tilting adjustment sawblade: elektrisch adjustment fence: elektrisch adjustment crosscut fence: manuell read out tilting: Digitalanzeige read out sawblade height: Digitalanzeige read out crosscut: digital Iedpox Edlxofx Ah Noal Anzeige Ablänglineal: Scala sawblade diameter: 450mm speeds: 4 motorpower: 5,5kW suction connection: 80 und 120mm machine length: 3600mm machine width: 2200mm weight: 1200 kg

Condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw Iaedpfsm Sk Hyex Ah Nol -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height: 70 mm (max. ca. 100 mm) -Cutting width: 345 mm -Miter cut: up to 45° -Chip extraction: with gate valve for connection to a central extraction system -Dimensions 1020/850/H1300 mm -Weight: 188 kg

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 1800 kg Iasdpfjx D H Tisx Ah Nol This SCHÜCO PDG SET was manufactured in 2008. A robust circular metal saw featuring a motor speed of 2800 rpm and a saw blade diameter of 500 mm. Weighing 1800 kg, it is fully functional and has been regularly maintained. Available for viewing under power on site. Contact us for further details regarding this machine. Application Types Sawing

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 850 kg Iaedpfx Ahevz Hkme Njl Total power requirement 5,5 kw

Condition: used, Year of construction: 1995, saw blade diameter 450 mm cutting diameter 130 mm cutting width 240 mm Iaedpfxex I Sfuo Ah Njl Cutting height 130 mm speed for saw blade 15 / 35 U/min weight of the machine ca. 0,85 kg dimensions of the machine ca. 1,2 x 1,2 x 1,85 m Cold circular saw with - Mitering device 45°/60° - Coolant system - 2 saw blades

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software SIEMENS WinAC RTX Outside Roller table for pre-loading (mm 5600 x 2200) + Pre-Loading Buffer Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher - DUPLUS2 No. 12 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 145 Max clamps opening (mm) 150 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting tables with Air blowing system (N.) 4 Ijdst Ah Nispfx Ah Noal Total power (Kw) 42 (ca.) OPTIONAL: Optimisation software: HPO

Condition: new, Year of construction: 2025, Saw Diameter: 500 mm Motor Power: 4 kW Iaodpfx Ahoxdciae Nsl Cutting Range of the 500 mm Diameter Circular Saw Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Saw Speed: 3000 rpm Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Machine weight: 220 kg Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer.

Condition: like new (used), Carriage length 2550 mm Scoring unit Manual adjustment of blade angle Manual adjustment of blade height Saw speed 4000 rpm Motor power 5 kW Maximum blade diameter 315 mm Year of manufacture 2016 Iasdsx Iutbepfx Ah Nel

Year of construction: 2017, condition: ready for operation (used), General Data Measurements width 1420 Measurements depth 5250 Measurements height 1900 Machine weight 1260 Iaodpfxox D Saze Ah Nol Additional Equipment Pneumatic saw feed Clamping device:2 horizontal clamping cylinders 2 vertical clamping cylinders This RAPID DGL 200-E sawing machine was manufactured in 2017. It features a manual swivel range from 45° to 90°, a 500mm saw blade, and pneumatic saw feed. It includes both horizontal and vertical clamping cylinders, enhancing its versatility. Dimensions for the 3700mm cutting length are 5250 x 1420 x 1900 mm, and it weighs 1260kg. A robust choice for diverse cutting needs. Contact us for further details regarding this sawing machine. Application Types Sawing

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 870 kg Total power requirement 5,5 kw Iedpfx Asvz Hivsh Noal

Year of construction: 1980, condition: used, Circular saw with miter cut Make KALTENBACH Type:KKS 400 M Year.ca.1980 Hydr.feed infinitely variable. Iaodpfx Aoixumvsh Njl Saw blade: 400mm

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Outside Rollers table for pre-loading (mm 4500 x 2200 ca.) Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Iasdpfx Aoq Rfahoh Nol Twin Pusher No. 10 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 135 Max clamps opening (mm) 133 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 0 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 36 (ca.)

Condition: new, Year of construction: 2025, Blade diameter ⌀250 - 350/30 mm Scoring blade diameter (work only with ⌀300, 350 mm blade) ⌀120/20 mm Main motor power 4 kW Scoring motor power 0.75 kW Rotation speed 4000 rpm Rotation speed of the scoring blade 8800 rpm Blade tilt 0 - 45° Max. cutting length 3200 mm Moving table stroke 3400 mm Cutting width with longitudinal ruler 1250 mm Wedge ⌀350 mm Iaodpfsv Dtuqjx Ah Njl Shaft flange diameter 87.5 mm Table stop ruler set to an angle of 90° - 45° accuracy ±1° Max. cutting height with ⌀300 mm blade 95 mm Max. cutting height with blade ⌀350 mm 120 mm Upper exhaust port diameter ⌀80 mm Lower exhaust port diameter ⌀100 mm Weight 650 kg

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 1150 kg Iedpox D Iqpsfx Ah Noal This Behringer PSU 450H was manufactured in 2019. It features a robust gear and worm gearbox driven by a 3-phase, 4.0/4.8 HP motor, ensuring durability and efficient operation. The user-friendly control panel includes handwheel controls for material stop and clamping pressure. Its hydraulic system is powered by a 2.4 HP motor with a 6.6-gallon pump. Additional features include a coolant system and a weight of 1150 kg. Contact us for more information about this machine. Application Types Sawing

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x3010x1250 mm Weight 400 kg Iaedpfovz Hgzjx Ah Nel Total power requirement 4 kw

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Iajdpfotwn E Usx Ah Nol Type:355 MLS Year 2002. Saw blade dm.355 mm Cutting range round max.120 mm Square max 120 mm X 120 mm

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,500 kg, total height: 1,250 mm, working width: 930 mm, product length (max.): 2,200 mm, General Data Machine weight 1500 kg Measurements height 1250 mm Dimensions Machine Length 2200 mm Technical Specification Working Width 930 mm Feed Speed 12 m/min Iaedpsx D E T Ujfx Ah Nol This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information. Application Types Sawing (Wood)

Year of construction: 2014, condition: ready for operation (used), This RALC ITALIA CUTTING LINE LYBRA was manufactured in 2014. It features an automatic circular blade for cutting metal tubes, including solid, tubular, and profiled types. Key components include a bar loader up to 6500 mm, multiple cutting capabilities, and a Siemens PLC for enhanced control. Ideal for high precision metal cutting. Contact us for more information about this machine. Iedpfx Asx D Ivxeh Neal Application Types Sawing