Clamping Units

UNBEKANNT 3er Set Spannblöcke - T-Nuten

Condition: excellent (used), Year of construction: 2000, Nominal diameter: 4,500 mm Swing diameter over bed: 820 mm Swing diameter over steady rest carriage: 650 mm Spindle bore: 115 mm Main spindle drive power: 40 kW Milling spindle drive power: 25 kW Milling spindle tool holder: HSK 100 Tool changer: 3 x 30 positions Control: SINUMERIK 840 C Kjdpeyk R Dyefx Agtsdl Including chip conveyor Including documentation Machine is under power and will be available in approximately 2 weeks!

Condition: ready for operation (used), Year of construction: 2012, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, it's ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information. • High-pressure coolant (15 bar) • Auto tool length measurement x 2 units • Visiport • 19" screen • Siemens software P • Signal tower • Additional work light • RMP60 probe Kedpfex D I A Sox Agtsdl • Bracket for NCRT for vertical use • Table centre partition • 48-tool magazine Additional equipment • Consep 2000 (chip conveyor/coolant system) for 15 bar, left-hand discharge

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 Kdodsyyybhopfx Agtsl X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Kdedpsw U Uh Dsfx Agtsl Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Kedpfxexl R Hvo Agtjdl Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: used, HERMLE B 300 is a 5‑axis machining center engineered for precision, high accuracy and production reliability. Working capacities: travels X 800 mm, Y 600 mm, Z 500 mm; table load max 250 kg; A‑axis ±110°; C‑axis 360°; max tool Ø 125 mm, tool length 300 mm, max tool weight 8 kg. Key specs: spindle taper HSK‑A63; spindle speed 20–15,000 rpm; spindle power 10 / 19 kW; rapid traverse 30 m/min; acceleration 5 m/s; max feed force 8,000 N; supply 3x400 V 50 Hz; total power 31 / 43 kVA; machine weight ≈ 8,500 kg. Equipment: 30‑position tool magazine, 1,000 L coolant system, BLUM tool breakage monitoring. Delivers tight tolerances; suited to automotive, watchmaking, aerospace, medical and toolmaking. Kdedpfx Aeyxnt Asgtjl

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Scanning Electron Microscope (SEM) Zeiss XB 350 Configuration and Accessories • Without FIB Column • SmartSEM- and SmartFIB-Software • GIS with Pt Precursor • Integrated Plasma Cleaner • EDS Oxford Xplore 30 (incl. Interface & Software) • Automatically 200 mm Air Lock • Electrical Feed-Through (2 x 15 Channels) • Circulation Cooling • Vacuum Buffer Tank (Quiet Mode) • ... and Table, Screen, Control Panel (i.e. Unique Zeiss Keyboard + Joystick) and Misc. Probe Holders Launch: August 2024 Site: Germany, Mainz Available at short notice by arrangement. The SEM is still in operation and can be viewed and demonstrated. Ksdpfsw Rdvvjx Agtedl The device has no defects or quirks and is fully functional. Further information available on request!

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) WZW 30-fold (BT50) Full 4th axis Kedpfxevgmr Io Agtjdl Spindle & gearbox new in 2017 1-shift operation Machine can be inspected under power !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine)

Condition: used, Year of construction: 2010, pillar-mounted slewing crane: mobil arm length ca. 2500 mm weight of the machine ca. 4 t weight max. in kg 125 kg bucket net weight 430 kg bucket filling weight mindestens 416 kg Kjdpfemt Rpwjx Agtjdl bucket - total weight mindestens 846 kg max. wheel load 391 kg max. support load 544 kg .

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Kdsdpfx Agoym Nbvetol Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.