Used T-Nut for sale (70,813)

Condition: ready for operation (used), Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible. Redov Amrtepfx Aahjw

Condition: ready for operation (used), Year of construction: 2018, A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Rodpowhfnpofx Aahow

Year of construction: 2016, condition: like new (used), Good working condition. Comes with controller and electronics. Please check out our other listings as well. Rodpfx Aaoh Rknmjhow

Year of construction: 2018, condition: new, Brand new never used! Comes with controller & electronics. Please check out our other listings as well. Rodpfjh Rknbsx Aahew

Condition: good (used), Year of construction: 2017, operating hours: 5,850 h, functionality: fully functional, TECHNICAL DETAILS Cutting sand: 6 t MACHINE DETAILS EQUIPMENT Redpfx Aow T Rxpeahow - Accessories - Spare parts - Wear parts

Condition: ready for operation (used), Opelka Berliner fryer Donuts 12 fryers for sale with 20 racks with 18 trays each Redpfx Aoxwy E Eeahsw

Year of construction: 2026, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 520 x 480mm Rjdpfx Aovuw R Reahsw - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: new, Catalog number: S0367 TECHNICAL DATA dimensions of the work table: 800x800mm motor power S1/S6: 3.0 / 4.4kW diameter of the hole in the table: 190mm spindle diameter: 30mm spindle tilt: 0° -45° Rodpfxozh Ii Ts Aahow spindle speed: 1400 / 3500 / 6000 / 8000rpm rotation: right, left vertical spindle travel: 175mm working height of the spindle: 125mm max. tool diameter for profiling / for tenon machining: 180/250mm diameter of the extraction nozzle: 120mm dimensions L/W/H: 2800x1800x1090mm weight: 410kg – machine is new – tilting spindle – with side table Net price: 17200 PLN Net price: 4100 EUR, depending on an exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: good (used), Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder, tool holder -Quick-change tool holder: Quick-change turning tool holder -Recording dimensions: see photos Rjdpfozhuwwjx Aahew -Tool holder: for grooving/slotting steel -Dimensions: 140/60/H125 mm -Weight: 1.9 kg

Condition: used, empty load weight: 6,740 kg, maximum load weight: 23,260 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2019, next inspection (TÜV): 01/2027, suspension: air, tire size: 235/75 R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75 R17,5 ---/140J, rear tire size: 235/75 R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing rings, stake pockets, -- Printing errors, mistakes and changes reserved, sample images -- More data at: !, More details: ! Redpfozhf Imjx Aahow

Condition: excellent (used), Overall dimensions: 3700 x 1070 x 1700 mm Disc coil inner diameter: 460 - 600 mm Rodpfx Aspvia Ejahsw Maximum sheet roll width: 1000 mm Direction of rotation: Bidirectional Hydraulic operation: - rotation - transverse movement on the chassis - shaft grip Pneumatic operation: - brake

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Redpfsfvqmxex Aahow Hydraulic

Condition: used, empty load weight: 3,450 kg, maximum load weight: 7,050 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 08/2021, next inspection (TÜV): 11/2026, loading space length: 6,200 mm, loading space width: 2,460 mm, suspension: steel, tire size: 235/75 R17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R17,5, rear tire size: 235/75 R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Steel floor, hydraulic ramps, lashing rings, -- Printing errors, mistakes and changes reserved, sample images --, More data at: !, More Details: ! Rsdpfxszg H S Re Aahew

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Rsdpfext Dmxsx Aahow Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: used, mileage: 121 km, power: 110 kW (149.56 HP), first registration: 12/2025, fuel type: electric, empty load weight: 5,935 kg, maximum load weight: 1,555 kg, overall weight: 7,490 kg, wheelbase: 4,450 mm, next inspection (TÜV): 07/2027, color: white, driver cabin: other, gearing type: automatic, number of seats: 3, loading space length: 4,400 mm, loading space width: 2,460 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), fog lights, parking sensors, power assisted steering, second-hand vehicle warranty, tail-lift, Exterior * Heated rearview mirrors Rodozhu H Sspfx Aahow * Omission of spare wheel holder Interior * Driver's comfort suspension seat, sprung and heated Safety * Airbag Comfort and Environment * Lane keeping assist * Blind spot assist * Rear warning system Multimedia * Tire pressure monitoring system Other * 2 DIN 7" touchscreen radio, including Apple CarPlay and Android CarPlay, and hands-free system * Manual throttle control * Rear crossmember at the end of the frame * Rear underrun protection * Kress cryogenic box body V-600-MAX-50 * Kress cryogenic box with tail lift and doors, 4400 x 2460 x 2100 mm * Sörensen 1000 kg tail lift * Heated leather steering wheel * Lease purchase/financing or leasing available through Daimler Truck Financial Service Germany (DTFSD). We would be happy to prepare an offer for you. * Mechanical auxiliary drive (MPTO) for refrigerated bodies * Payload 1555 kg * Performance package: Optimized cabin temperature control * Premium seal tire repair kit * Rear view camera with monitor * Interface, fleet management system FMS * Fuso safety package including floor mats * Special paint finish, Arctic White * Voltage converter 12 V / 24 V * Extended mirror mount, long version including wide-angle mirror * Day registration with Daimler Truck AG * Windshield, laminated green glass, heated * XMC module (parameterizable special module) * Stabilizer, rear axle Other: * Nationwide delivery for €399 net plus VAT (€474.81 including VAT). * For all vans: On request, 12 or 24 months Mercedes-Benz used car warranty is possible. * We will gladly take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing/financing via Mercedes-Benz Bank. We would be happy to prepare an offer for you. * No liability for printing and typographical errors * Subject to change and prior sale.

Condition: used, mileage: 121 km, power: 110 kW (149.56 HP), first registration: 12/2025, fuel type: electric, empty load weight: 5,935 kg, maximum load weight: 1,555 kg, overall weight: 7,490 kg, next inspection (TÜV): 07/2027, color: white, driver cabin: other, gearing type: automatic, number of seats: 3, loading space length: 4,400 mm, loading space width: 2,460 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), fog lights, parking sensors, power assisted steering, tail-lift, Exterior * Heated rearview mirrors * Omission of spare wheel holder Interior * Driver's comfort suspension seat, sprung and heated Safety * Airbag Comfort and Environment * Rear view camera * Lane keeping assist * Blind spot assist * Rear collision warning Multimedia * Tire pressure monitoring system Other * 2 DIN 7" touchscreen radio, including Apple CarPlay and Android CarPlay, and hands-free system * Manual throttle control * Rear end crossmember at the end of the frame * Rear underrun protection * * Kress freezer body V-600-MAX-50 * Kress freezer box with tail lift and doors, 4400 x 2460 x 2100 mm * Sörensen 1000 kg tail lift Rsdszhu Icopfx Aahjw * Heated leather steering wheel * Rent-to-own/financing or leasing possible via Daimler Truck Financial Service Germany (DTFSD). We will gladly prepare an offer for you. * Mechanical auxiliary drive (MPTO) for refrigerated bodies * Payload 1555 KG * Performance package: Optimized cabin temperature control * Premium Seal tire repair kit * Rear view camera with monitor * Interface, Fleet Management System FMS * Fuso safety package incl. floor mats * Special paint: Arctic White * Voltage converter 12 V / 24 V * Extended mirror bracket, long version incl. wide-angle mirror * One-day registration to Daimler Truck AG * Windshield, laminated green glass, heated * XMC module (parameterizable special module) * Stabilizer bar, rear axle Other: * Nationwide delivery for €399 net plus VAT (€474.81 incl. VAT). * For all vans: Upon request, a 12 or 24-month Mercedes-Benz used car warranty is possible. * We will gladly take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing/financing via Mercedes-Benz Bank. We will gladly prepare an offer for you. * No liability for printing and typographical errors * Errors and prior sale reserved.

Condition: new, The double-sided cantilever rack by BLT, with a height of 315 cm, is ideally suited for storing medium-weight long goods such as profiles, pipes, and bars in warehouses, workshops, or craft businesses. With an approximate rack length of 5.12 m, a usable depth of around 80 cm, and a total of 5 levels per side including the base level, this cantilever rack offers clearly arranged and easily accessible storage space for long and bulky items on both sides. Each cantilever arm can support up to 500 kg, and each upright can handle up to 1,800 kg per side. The bolt-on cantilever arms with deflectors ensure robust and practical use in day-to-day operations. Made in Germany. Freight within Germany already included, plus VAT. Product details: - Rack type: Double-sided cantilever rack - Height: approx. 315 cm - Length: approx. 5.12 m - Total depth: approx. 174 cm - Bay width: approx. 128 cm - Cantilever arms: approx. 80 cm usable length (IPE80) - Usable depth of base level: approx. 80 cm - Load per arm: max. 500 kg (with even load distribution) - Load per upright: max. 1,800 kg per side (without base level, with even load distribution) - Levels per side: base + 4 storage levels (5 levels per side total) - Design: Double-sided, bolt-on cantilever arms with deflectors - Upright profile: IPE140 - Cantilever arm profile: IPE80 - Colour finish: RAL 7016 - Manufacturing: Made in Germany - Delivery: Freight within Germany included, plus VAT Scope of delivery: - 5 × uprights made from IPE140, height approx. 3,150 mm - 40 × cantilever arms, approx. 80 cm length, made from IPE80 - Including mounting hardware - Including heavy-duty anchors for floor fixing Advantages of the BLT cantilever rack: - Ideal for storing medium-weight profiles, pipes, and bars - Double-sided design for storage space accessible from both sides - Bolt-on cantilever arms with deflectors - 5 levels per side, including base, for optimal use of storage space - Up to 500 kg load capacity per arm and up to 1,800 kg per upright per side - Secure floor anchoring with supplied heavy-duty anchors - Made in Germany - Freight within Germany included Delivery: - Freight within Germany included - Delivery includes mounting hardware - Secure floor anchoring with supplied heavy-duty anchors Redszhr Rbspfx Aahjw Enquiries & custom planning: Take advantage of our personal consultation for your individual storage solution. Inform us of your required dimensions, stored goods, and available space. Our experienced consultants are happy to provide you with a non-binding offer featuring custom planning and structural calculation for your bespoke cantilever racking system. Use our enquiry list or contact us directly by phone. Together, we will plan your tailor-made racking system.

Condition: new, Year of construction: 2026, GANNOMAT "PROTEC 571" (Drilling, Grooving, Milling) Base machine complete in standard configuration for drilling and grooving including: - Additional safety device via louver curtain - Requirement for horizontal Lamello P-system milling Rodpjzgfwlefx Aahew - Requirement for milling diameter > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, right and left rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the back of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, from Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and milling cutter set 1 HSK mounting set 1 Mounting device HSK63F, simplest operation with the highest level of user comfort thanks to the roller clamping system, no clamping or tightening required, mounted on a stable base or on a workbench 1 Hook wrench for HSK63F collet 462E 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, grid 196 mm 1 Counterpressure device from above 1 LED lighting in the machine's working area 1 Tool for vertical Lamello P-system milling Machine with very good equipment including many drills and tools New machine with full warranty. The machine can be viewed and demonstrated in our showroom. A special price can be offered for our showroom machine!!!!!

Condition: used, empty load weight: 2,860 kg, maximum load weight: 9,040 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 08/2018, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: other, tire size: 235/75 R17,5 143J/, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R17,5 143J/, rear tire size: 235/75 R17,5 143J/, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , Surcharge for ramps €800, , -- Printing errors, mistakes and changes reserved, sample images --, More data at: ! More details: ! Rodpfx Ajzgcznjahow

Condition: like new (used), quantity 18 set Assorted Frömag grooving cutters, sold as a set -> 6x 6P9 - 15° Ø18-20 - A61 Rsdpfjzf Np Aox Aahow -> 2x 6P9 - 15° Ø17-18 - A60H / A60 -> 1x P59 - 15° - A-SO-60 -> 2x P59 - 15° - A51 -> 3x 4P9 - 15° Ø13-15 - A40 -> 1x 4P9 - 15° Ø12 - A40 -> 1x 3P9 - 15° Ø13-15 - A30 -> 2x 6 - Ø18-20 Individual purchases also available—just ask

Condition: used, quantity 23 Set Various grooving cutters for sale as a set Rsdezf Npiopfx Aahsw Hünnema: -> 1x GH7 - 15° Ø18-20 -> 4x 6P9 - 15° Ø18-19 - A54W -> 1x 5P9 - 15° Ø15-17 - A34 WGW: -> 4x 5P9 - Ø13-15 - W50 TGW: -> 4x 4P9 - Ø13-15 - W50 -> 1x 5P9 - Ø16-17 - W53 -> 8x 6P9 - Ø18-19 - S54

Condition: used, empty load weight: 3,130 kg, maximum load weight: 8,770 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 12/2015, next inspection (TÜV): 09/2027, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 1,500 mm, loading space volume: 18 m³, suspension: steel, tire size: 235/75R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75R17,5 143J, rear tire size: 235/75R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 500 mm sidewalls, + 1,000 mm mesh extension, lashing rings, vehicle hot-dip galvanized and painted, surcharge for ramps: €1,000; -- Misprints, errors and changes reserved, sample images -- More data at: !, More details: ! Rjdjzf H T Sjpfx Aahsw

Condition: excellent (used), Ferno Model 59 T EZ Glide – stair transport chair, 227 kg. Professional evacuation and transport chair by Ferno with EZ Glide system, designed for the safe descent of patients down stairs. Sturdy aluminium frame, complete set of safety straps, foldable components for easy transport and storage. The equipment is functional, well-maintained, and ready for use. Ideal for EMS, fire services, hospitals, and care facilities. Price listed per unit. Redpox N Ic Esfx Aahsw

Condition: excellent (used), For sale: Professional ABUS electric hoist with a lifting capacity of 3.2 t, including the original ABUS 3.2 t hook block and an automatic Conductix Wampfler cable reel. The set was removed from an operational facility. Complete set for installation on an overhead crane or transport system in a production hall. Hoist Technical Data • Manufacturer: ABUS Kransysteme GmbH • Lifting capacity: 3.2 t (3200 kg) • Model: GM 1032 • Year of production: 1993 • Lifting height: approx. 6 m • Rope diameter: 7.5 mm • Number of falls: 4/1 • Lifting speed: 1 / 5.3 m/min • Power supply: 380–415 V / 50 Hz Rsdpeytymcjfx Aahow • Insulation class: F • Protection class: IP54 Hook block • Manufacturer: ABUS • Lifting capacity: 3.2 t • Swivel hook • Designed for use with ABUS hoists Cable reel • Manufacturer: Conductix Wampfler (Delachaux Group) • Max. voltage: 400 V • Protection class: IP55 • Max. current: 22 A Condition • Device dismantled from a working installation • Complete set as shown in the photos

Condition: excellent (used), For sale: Original J.D. Neuhaus PROFI pneumatic hoist, model LN-1T, with a lifting capacity of 250 kg (0.25 t). Manufactured in Germany in 1991 by J.D. Neuhaus Hebezeuge GmbH & Co., Witten-Heven – a global leader in pneumatic lifting systems. Technical specifications: • Model: PROFI LN-1T • Lifting capacity: 250 kg (0.25 t) • Year of manufacture: 1991 • Power supply: 6 bar compressed air • Air consumption: approx. 3–4 m³/min • Chain: steel 5 x 15 mm, DIN 5684-8 standard • Controls: dual-lever (up/down) • Weight: approx. 35 kg Condition: • Used, fully functional. Rsdpfextfnwox Aahew • Complete set including hook, control valve, and chain bag. • Normal signs of use, with no mechanical damage. Applications: Suitable for lifting tools, components, and parts in workshops, assembly lines, industrial plants, and ATEX zones (depending on version). JDN construction ensures reliability and durability – made in Germany, commonly used in the aerospace, petrochemical, and automotive industries.