Used T-Nut for sale (15,225)

Condition: used, mileage: 159,800 km, power: 120 kW (163.15 HP), first registration: 09/2016, fuel type: diesel, overall weight: 5,000 kg, next inspection (TÜV): 11/2025, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 10 m³, loading space length: 3,450 mm, loading space width: 1,880 mm, loading space height: 1,510 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, No. 57 - You will find this and many other inspected Mercedes Benz vans on our homepage: ----Mercedes-Benz Sprinter 516 CDI, EURO 6, Frigopan refrigerated box with Thermo King V300 Max cooling unit. Temperature range -22°C / +20°C. Very robust vehicle with a high payload of 2,150 kg. Drive and stationary cooling are available. The vehicle is in good visual and technical condition. HU/AU (TÜV) valid until 11/2025. Permissible total weight: 5 t, Unladen weight: 2,850 kg, Payload: 2,150 kg.----The refrigeration is running but does not cool down to the set temperature. Presumably, there is too little refrigerant in the system. Cause unknown.----The box stands out for its sturdy and practical construction (reinforced front wall, rear doors, side doors right and left, aluminum floor with collision protection). ----The vehicle is from the first owner, has a complete service history, and is in good visual and technical condition. The service was carried out at KM 47, 104, 134, 151.----Permissible total weight: 5 t Unladen weight: 2,850 kg Payload: 2,150 kg Cargo area LxWxH in cm: 345 x 188 x 151 Emission class: EURO 5 Long wheelbase: 3665 mm VIN: WDB9061531N663635 All-weather tires 2 keys ----* Mercedes-Benz Sprinter 516 CDI in good condition * Deep-freeze box * Frigopan refrigerated box * Thermo King V300 Max cooling unit, deep freezing down to -22°C * Temperature recorder * Drive and stationary cooling * Tachograph * Cruise control * Lane keeping assistant * Becker Map Pilot navigation system * Reinforced stabilizer at front, reinforced front axle * 3 seats * Audio system Audio 15 * Electric windows * Electrically adjustable exterior mirrors * Airbag * Central locking ----Errors, modifications, and prior sale reserved. Iedpfowtcfpsx Affotr Special Equipment: 1 DIN slot at the front under the headlining, Audio system Audio 15 (radio with color display), exhaust before rear axle left, outside temperature display, single-pole battery disconnect switch, roof control unit with reading light on driver/passenger side, digital tachograph, downloadable, 180 A generator, folding lid for storage compartment, fuel filter with water separator, front PTO with bracket for additional coolant compressor, Becker MAP Pilot navigation system, spare wheel Super-Single tires (235/65 R16), spare wheel holder under the end of the frame including jack, front mud flaps, seats in cab: passenger double seat, seats in cab: driver's comfort seat, reinforced front stabilizer, rear wall lining, fleece battery 95 Ah, heat protection glazing (windscreen with top band filter) Additional Equipment: Adaptive brake light, driver's airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors, both, exterior mirrors with integrated indicator, battery 74 Ah, brake assist, braking system with ABS+ASR, roof lining in cab, driving assistance system: lane keeping assistant, lockable glove compartment, body/construction: platform, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, model update, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker package, tires 285/65 R16C super-single tires on rear axle, low emissions according to Euro 6 emission standard, seat belt system with warning device (driver's side), seat cover/upholstery: fabric Lima, seats in cab: adjustable passenger seat, service interval indicator Assyst, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle

Condition: ready for operation (used), functionality: fully functional, mileage: 555,538 km, power: 160 kW (217.54 HP), first registration: 02/2004, fuel type: diesel, empty load weight: 5,005 kg, maximum load weight: 6,985 kg, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, Year of construction: 2004, Equipment: cable winch, trailer coupling, 1 used DAF FA LF 45 E Iodpfxoud H E Ro Affstr • First registered: 02/2004 • Mileage (ready): approx. 555,538 km • Power: 160 kW/218 HP • Gross vehicle weight: 11,990 kg • Empty weight: 5,005 kg • Payload: 6,985 kg • Cable winch approx. 5t • Two tool boxes, lockable You can find all of our vehicles on our website schwinn24.de

Condition: good (used), Technical data for the workbench frame: Manufacturer: Jung Heinrich Type: T The scope of delivery includes: 02x workbench stand, used Material color: blue Iederdy Ivspfx Affstr Stand height: approx. 910 mm Stand depth: approx. 1,050 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( welded framework ) 04x workbench crossbars, used Material color: orange Box profile: 120 x 50 mm Truss type: HN 120|20 clear width: 2,700 mm 08x locking pins, used Version: sendzimir galvanized For securing the longitudinal beams against unintentional lifting out The pictures serve to illustrate the material. The material color may vary. The workbench racks are commissioned in an assembled state; The workbench stands are pre-assembled; The production time is usually approx. 3 - 5 working days. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, functionality: fully functional, Year of construction: 2023, In this offer you purchase a used automatic edger ‘Nidek Lexce Trend/DB Patternless Edger’ Object of sale: 1 x Nidek Lexce Trend /DB EAN: 2008783216791 with the following equipment: incl. built-in tracer EAN: 2008783216838 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: Itedpfxovtbczo Affsr You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: good (used), Multi-spindle head, multi-spindle drill head, dowel drill head, hardware drill head -Dimensions: 190/85/75 mm -Drilling distance: 26 mm -Medium drill bit: offset by 5 mm -Number: 1x drill heads available Itsdpfx Afeb A I Ulsfsr Price: per piece -Weight: 2 kg/piece

Condition: ready for operation (used), T-POLE T-POD-121 Industrial Monitor 12.1" , serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Iodpfx Asxah Tcsffstr

Condition: ready for operation (used), Year of construction: 2023, General Data Machine weight 545 kg Main Drive Spindle speed range 24000 Spindle motor power 4.0 kW Number of axis 3 Movement X-Axis Movement 900 mm Y-Axis Movement 600 mm Z-Axis Movement 200 mm Additional Equipment Accessories: Electronic handwheel, Gigabit network switch (5 ports) This 3-axis T-Rex Servo-0609 was manufactured in 2023. It features a CNC portal milling machine with a KinetiC-NC control system and PC software. The travel dimensions are 900 mm (X) × 600 mm (Y) × 200 mm (Z). It includes a Hiteco 4.0 kW ATC spindle, air-cooled, with a 24,000 rpm and an automatic 4-fold tool changing station. Consider the opportunity to buy this T-Rex Servo-0609 gantry milling machine. Contact us for more information about this machine. Itjdpfx Afox H A Nnofjr Application Types Milling

Condition: good (used), Year of construction: 1998, operating hours: 65,000 h, clamping force: 3,300 kN, screw diameter: 70 mm, clearance between the columns: 710 mm, displacement volume: 1,039 cm³, injection pressure: 1,400 bar, injection weight: 940 g, DEMAG ERGOTECH 330 T injection molding machine in good condition Reference: Ergotech E330-1450-NC4S Year: 1998 65,000 operating hours Screw diameter: 70 mm L/D ratio: 20 Isdpfx Aewcq A Uoffjtr Injectable volume: 1039 cm3 Injectable weight in PS: 940 g Injection pressure: 1400 bar Maximum dosing stroke: 270 mm Heating power: 27 kW Plate dimensions: 1040 x 950 mm Distance between columns: 710 x 630 mm Mold thickness: 330 - 710 mm Maximum opening stroke: 675 mm + SEPRO robot type 3031 YN MPA II X axis: 2500 mm Y axis: 800 mm Z axis: 1400 mm Machine dimensions: 6.50 x 2.00 x 2.30 m Machine weight: 14,300 kg

Condition: good (used), clear span: 2,700 mm, total height: 2,200 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 1, shelf length: 14,100 mm, Technical data for the pallet racking system: Racking system: Jung Heinrich Type: T (Thyssen) Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 14,100 mm Number of bays per row of shelves: 05 pcs. 2,700 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 45 pcs. Total pallet spaces: 45 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg Iodpfx Afequpxrefstr The scope of delivery includes: 06x pallet rack uprights, used Material color: blue Profile dimensions: 100 x 65 x 2.50 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( welded framework ) 2,200 mm high 1,100 mm deep 20x pallet rack beams, used Material color: orange INP profile: 100 x 50 mm Agraffe: 3 HK (hooks) clear width: 2,700 mm Max. load per pair of beams 3,000 kg, with evenly distributed load 40x safety pins, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shims, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), For sale: Original J.D. Neuhaus PROFI pneumatic hoist, model LN-1T, with a lifting capacity of 250 kg (0.25 t). Manufactured in Germany in 1991 by J.D. Neuhaus Hebezeuge GmbH & Co., Witten-Heven – a global leader in pneumatic lifting systems. Technical specifications: • Model: PROFI LN-1T • Lifting capacity: 250 kg (0.25 t) • Year of manufacture: 1991 • Power supply: 6 bar compressed air • Air consumption: approx. 3–4 m³/min • Chain: steel 5 x 15 mm, DIN 5684-8 standard • Controls: dual-lever (up/down) • Weight: approx. 35 kg Condition: • Used, fully functional. Iedpfx Afjxtfnwofstr • Complete set including hook, control valve, and chain bag. • Normal signs of use, with no mechanical damage. Applications: Suitable for lifting tools, components, and parts in workshops, assembly lines, industrial plants, and ATEX zones (depending on version). JDN construction ensures reliability and durability – made in Germany, commonly used in the aerospace, petrochemical, and automotive industries.

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 220 V 500 W Iedpfx Aob A Sdajffetr -Length: 165 mm -Diameter: 13 mm -Price: per piece -Quantity: 4x Available -Weight: 0.2 kg

Condition: ready for operation (used), T-POLE T-POD-121 Industrial Monitor 12.1" , serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Itsdpfx Afsxah S Sefsr

Condition: new, functionality: fully functional, overall weight: 2,320 kg, suspension: other, color: orange, Year of construction: 2025, operating hours: 5 h, power: 14.6 kW (19.85 HP), fuel type: diesel, gearing type: automatic, fuel consumption per hour: 2 l/h, number of seats: 1, operation weight: 2,200 kg, lifting height: 4,190 mm, chain condition: 100 %, drive condition: 100 %, shovel volume: 0.068 m³, fuel tank capacity: 20 l, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-25P is a compact and powerful 2.5-ton mini excavator designed for professional use in construction, landscaping, municipal, and agricultural applications. Its robust construction and advanced load-sensing hydraulics deliver efficient, precise performance, even under demanding conditions. With its boom swing capability, the machine is ideal for work in confined spaces as well as for traditional earthmoving and foundation work. Key Technical Features: - Boom swing for precise operation in tight areas - Stable undercarriage (1,300 / 1,500 mm) for high stability - Powerful Yanmar diesel engine - Load-sensing hydraulic valves for sensitive control - High-performance axial piston pump - Hydraulic piston travel and swing motors - High digging and breakout forces - Wear-resistant rubber tracks Weights & Dimensions: - Operating weight: 2,200 kg - Operating weight with cabin: 2,320 kg - Bucket capacity: 0.068 m³ - Wheelbase: 1,500 mm - Track length: 1,940 mm - Upper structure ground clearance: 220 mm - Counterweight swing radius: 670 mm - Undercarriage width: 1,300 / 1,500 mm - Track width: 230 mm - Track height: 50 mm - Transport length: 4,100 mm - Overall height: 2,440 mm Engine: - Model: Yanmar 3TNV80F - Displacement: 1.267 l - Engine power: 14.6 kW at 2,400 rpm (16.1 HP at 2,300 rpm) - Max. torque: 67.4 Nm at approx. 1,800 rpm - Engine oil capacity: 3.4 l - Fuel tank: 20 l Travel & Performance Data: - Travel speed: 2.0 – 3.8 km/h - Swing speed: 9.5 rpm - Max. gradeability: 30° - Max. drawbar pull: 23 kN - Ground pressure: 26.5 kPa Working Range: - Max. digging reach at ground level: 4,520 mm - Max. digging reach: 4,400 mm - Max. digging depth: 2,410 mm - Max. vertical digging depth: 1,930 mm - Max. dump height: 2,880 mm - Min. swing radius: 2,130 mm - Bucket breakout force: 20 kN - Arm breakout force: 13.5 kN Dozer Blade: - Max. lift height: 260 mm - Max. drop depth: 300 mm Undercarriage: - Track material: Rubber - Track model: 230 × 48 × 82 - Track tensioning system: Grease cylinder Hydraulic System: - Pump type: Axial piston pump - Flow rate: 67.2 l/min - Operating pressure: 24.5 MPa - Hydraulic valves: Load sensing - Swing motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors Equipment: - Boom swing - Fully enclosed cabin with heating - Dozer blade - Joystick control - LED work lights - Comfort seat - Rubber tracks - Hydraulic safety valves - Reinforced steel structure Accessories & Attachments – Included Set: - 25 cm trenching bucket - 50 cm digging bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: Itjdpjx Hg Etjfx Affor - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (drills 150 / 200 / 300 mm + extensions) – Set price €650 RRP Maintenance & Warranty: - Service every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts ex stock Rheda-Wiedenbrück (DE) Delivery & Availability: - Short delivery times possible (subject to stock) - Fixed-date delivery January 2026 guaranteed - Europe-wide delivery available on request This machine complies with the highest safety standards and is CE-certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET PRICE NET: €22,000 RRP Location: Rheda-Wiedenbrück

Condition: good (used), Year of construction: 2010, 15 kg euroblock cheese production line. Capacity: 6.000 liters milk per batch input. Capacity of cheese: 600 kg cheese output. Milk reception - Milk reception pump from truck. - Raw milk storage tanks (cooled). 2 x 6.000 liter, Meuller. Year: 2012. - Milk receiving manifold (Tuchenhagen valves). Itjdex Ekptepfx Affjr Milk processing - Van t’ Riet Pasteurizer incl. program, 6,000 liters. Year of construction: 1996. - Buffer pasteurized milk tank 6.500 liters. Cheese processing - Damrow closed cheese vat (double O), 6,000 liter capacity per batch. - Van t’ Riet drainage pre-pressing vat. Year of construction: 2010. - Tunnel presses (42 cylinders), Van ’t Riet. - micro perforated LAUDE moulds, 15 kg euro block. - 2x mould washers bins. - 8x brine cages (excluding brine baths, which are cast in concrete) - 2x brine cooling. Whey - Horizontal whey tank, over 6,000 liters capacity. CIP - CIP (full automatic, Siemens S7) consisting of 1 tank with 3 compartments Can be visited on request.

Condition: excellent (used), Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data of the pallet rack traverse: Racking system: Jung Heinrich Type: T Included in delivery are: 01x pallet rack traverse, used Material color: orange Type of truss: HN 120|20 box profile: 120 x 50 mm agraffe: 3 HK (hooks) clear width: 2.700 mm max. load per truss pair 2.700 kg, with evenly distributed load 02x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out Iodpjixqirofx Affotr General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: new, Year of construction: 2025, functionality: fully functional, *All of our products are carefully manufactured and have a 1-year warranty! Iodpex Dhb Iofx Affotr *Installation and Operator Training are FREE! FTC-200-S Mobile Cone Crusher (With Screen); It consists of a feeding bunker, cone crusher and stock conveyor belt and generator. FTC-200-S Mobile Cone Crusher (With Screen), which is moved by remote control on a tracked chassis, successfully completes all commands given by the user by moving on its tracks in all kinds of difficult climate conditions and rough terrain. FTC-200-S Mobile Cone Crusher (With Screen), is precisely designed and carefully manufactured for stone crushing and is the leading mobile cone crusher in the sector with a crushing capacity of 100-200 T/H per hour. FTC-200-S Mobile Cone Crusher (With Screen) does not require an extra infrastructure as a production method, it is moved by remote control as mobile and adapts to all difficult terrain conditions. TECHNICAL SPECIFICATIONS: Model: FTC 200-S Crusher Type: Cone Crusher Vibrating Screen Size: 1300x3000 mm Production Capacity: 100-200 T/H Maximum Feed: 185mm Total Power: 300 kVA Weight: 46,000 Kg PLEASE CALL US FOR DETAILED INFORMATION!!!

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 230V 500W -Length: 90 mm -Diameter: 13 mm Ijdpfx Afjb A Sc Usfetr -Price: per piece -Quantity: 9x Available -Weight: 0.2 kg

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2026, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-20PRO is a modern, powerful, and versatile 2-ton mini excavator, designed for continuous professional use in structural, civil engineering, and landscaping applications. With its robust steel construction, advanced load-sensing hydraulics, and compact dimensions, this machine is perfectly suited for tight construction sites as well as demanding earthmoving and foundation work. The fully enclosed cab with integrated heating makes the LT-20PRO a true all-season machine, providing exceptional operator comfort, safety, and productivity — even in cold, rainy, or windy conditions. Key Technical Features: - Swing boom for precise work in confined spaces - Extendable undercarriage (990–1,300 mm) for maximum stability - Integrated travel motors with high/low-speed - Load-sensing hydraulic valves — energy-efficient and responsive - Axial piston pump with variable displacement - Plunger-type slew motor for upper carriage - Double cast counterweights for high stability - Wear-resistant rubber tracks, 230×48×70 Weights & Dimensions: - Operating weight: 1,800 kg - Bucket capacity: 0.04 m³ - Wheelbase: 1,230 mm - Track length: 1,595 mm - Ground clearance (upper carriage): 460 mm - Counterweight swing radius: 735 mm - Undercarriage width: 990 / 1,300 mm (extendable) - Track width: 230 mm - Track height: 380 mm - Transport length: 3,600 mm - Overall height: 2,450 mm - Bucket width: 485 mm Engine: - Kubota D902-E4B-CBH-1 - Displacement: 0.898 l - Engine output: 11.8 kW at 2,300 rpm (16.1 HP) - Max. torque: 51.3 Nm at 1,800 rpm - Engine oil capacity: 3.7 l - Fuel tank: 19 l Travel & Performance Data: - Travel speed: 2.2 / 4.5 km/h Itodpfx Aox Hg D Ajffer - Slew speed: 9.5 rpm - Max. gradeability: 30° - Max. drawbar pull: 18 kN - Ground pressure: 29 kPa Working Range: - Max. digging reach at ground level: 3,840 mm - Max. digging reach: 3,910 mm - Max. digging depth: 2,270 mm - Max. dumping height: 2,480 mm - Max. digging height: 3,570 mm Dozer Blade: - Max. lift height: 280 mm - Max. digging depth: 190 mm Hydraulic System: - Pump type: Axial piston pump - Flow rate: 64 l/min - System pressure: 23 MPa - Hydraulic valves: Load sensing - Slew motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors - Hydraulic oil tank: 17.5 l Standard Equipment: - Fully enclosed cab incl. heating - Joystick controls - LED work lights - Comfort seat - Rubber tracks 230×48×70 - Dozer blade - Hydraulic safety valves - Reinforced steel frame - Double cast counterweights Accessories & Attachments — SET includes: - 25 cm trenching bucket - 50 cm digging bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (150 / 200 / 300 mm augers + extensions) – SET PRICE €650 Maintenance & Warranty: - Service intervals: every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts from stock in Rheda-Wiedenbrück (DE) Delivery & Availability: - Short delivery times possible (subject to stock) - Fixed-date delivery in January 2026 guaranteed - Europe-wide delivery organized on request This machine meets the highest safety standards and is CE certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €20,500 RRP Location: Rheda-Wiedenbrück

Condition: good (used), Dimension: Width: approx. 2.900 mm Height: approx. 1,038 mm Depth: approx. 1.100 mm Technical data of the workbench frame: Manufacturer: Jung Heinrich Type: T Included in delivery are: 02x workbench stand, used material color: blue stand height: 1.000 mm stand depth: 1.100 mm stand profile: 100 x 65 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( welded truss ) 02x workbench crossbars, used Material color: yellow Iodpfelnfi Rjx Affetr box profile: 120 x 50 mm type of truss: HN 120|25 clear width: 2.700 mm 04x safety pins, used execution: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.900 mm Depth chipboard: 1.100 mm Chipboard in two parts if necessary 08x drilling screws, new Finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 220V 800W -Length: 140 mm -Diameter: 13 mm -Price: per piece -Quantity: 12 available Isdpfx Afob A Sdbjfjtr -Weight: 0.2 kg

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Jung Heinrich Type: T Technical Data for Installation: Number of Racking Rows: 01 pc Length per Row: 25,300 mm Number of Bays per Row: 09 pcs Number of Levels incl. Floor Level: 02 pcs Technical Data for Capacity: Pallet Positions per Bay: 09 pcs Pallet Positions per Row: 81 pcs Total Pallet Positions: 81 pcs Based on: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total Height incl. Pallet: n.d. Maximum Pallet Weight: 900 kg Scope of Delivery Includes: 10x Pallet Racking Uprights, used Material color: blue Profile dimensions: 100 x 65 x 2.0 mm Incl. horizontal and diagonal braces, foot plates The uprights are pre-assembled (welded truss construction) 2,200 mm high 1,100 mm deep 36x Pallet Rack Beams, used Material finish: Sendzimir galvanized Beam type: HN 120|20 Box profile: 120 x 50 mm Connector: 3-hook Clear span: 2,700 mm Max. load per beam pair: 2,700 kg, with evenly distributed load 72x Locking Pins, used Material finish: Sendzimir galvanized To secure the beams against unintentional lift-out Itedpfx Aetq Hfueffer 40x Wedge Anchors, new Manufacturer: Hilti Model designation: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 20x Shim Plates, used Finish: fully galvanized For leveling racking uprights placed on uneven floors 01x Load Sign With specifications for bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only offered for collection. Any further transport or shipping of this item will incur additional costs, which can be requested from us depending on delivery location and scope.

Condition: good (used), Motor protection switch, star-delta switch, reversing switch -Type: Mehb -Adjustment range in amperes: 1.3 - 2.0 -Price: per piece Itodpsb A Scyefx Affsr -Quantity: 7 pieces available -Weight: 2 kg

Condition: good (used), Motor protection switch, star-delta switch Itodeb A Scwspfx Affor -Type: MYehb -Price: per piece -Number: 18 available -Weight: 2 kg

Condition: good (used), Motor protection switch, star-delta switch, reversing switch -Type: MDPPehb -Setting range in amperes: 4.9/5.5 Itedpfxob A Sc Eo Affsr -Number: 16x switches available -Price: per piece -Weight: 2 kg

Condition: good (used), Motor protection switch, star-delta switch, reversing switch -Type: NNWYehb 15 -Adjustment range in amperes: 1.3 - 2.0 -Price: per piece -Quantity: 10 pieces available Iedpfx Asb A Sczeffjtr -Weight: 0.8 kg