Used Swing Beam Shear for sale (8,943)

Condition: new, Year of construction: 2019, sheet width 2050 mm plate thickness 2 mm strokes per minute until 38 cutting angle 1,75 ° table height over floor 870 mm total power requirement 3 kW weight of the machine ca. 1520 kg range L-W-H 2,2 x 0,6 x 1,2 m Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Hnedpsvn Al Hjfx Afiou Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille. Plus freight + packaging 270,--. This is a demonstration machine at a special price, so we are selling it without any warranty. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Hnedeg U Uv Rspfx Afiju Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: good (used), functionality: fully functional, Year of construction: 1997, Used Geka profile steel shear Type: HYD 50 Capacity: 50 tons 5-way system 2 cylinders for double operation Hsdpfxsxnqahe Afionu Including tools

Condition: used, Year of construction: 2004, operating hours: 19,000 h, Serial number: 873xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20699 Specifications: - 2004 model - Approx. 19,000 hours - 17,750 kg - Machine width: 253 cm - Support legs - Shear - Tires (see pictures) - Broken boom - Extra hydraulics - Small leaks in hoses - Trailer hitch Hnodswqwrropfx Afisu - Door lock does not work - Broken front window - Air conditioning - Lights - Ready for delivery Description: We have a 2004 Volvo EW160B wheeled machine with support legs and shear for sale. Small leaks in hoses occur, and the door to the cab does not lock. There are also tires of different dimensions. Otherwise, the machine starts and all functions function as they should, according to the owner. Faults and defects occur and some additional costs must therefore be expected. Ready for delivery Hours: 19000 Own weight: 17750 Total Weight: 17750 Width: 253 Model: EW160B hjulmaskin m/ støtte bein og skjær

Condition: used, Year of construction: 2002, Empty weight: 75 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - Serial number: 991 - Voltage [V]: 230 - Current consumption [A]: 0.07 - Power [kW]: 0.1 - Transport weight [kg]: 75kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Hnodpfswtx Umsx Afiju

Condition: used, machine/vehicle number: 007829, Position 1: Front-Loading Panel Saws SCHELLING-FH 4 430/220-P Hnedpfx Aswu Ahgofiou Position 2: Automated Warehouse SCHELLING-FH 4 430/220-P

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND bending length: 1020 mm bending capacity: 2,5 mm max. bending angle: 0 - 135°. segmentation of the upper beam: 270; 200; 150; 100; 75; 50; 45; 40; 35; 30; 25 mm opening width of the upper beam: 45 mm backgauge manually adjustable up to: 540 mm Hnedpfopgmtwex Afiju weight: 285 kg

Condition: excellent (used), Year of construction: 1995, Schroeder HS 2000/1.0 Manual Guillotine Shear Specifications: Manufacturer: Schröder Hodpfxswhf Nte Afienu Model: HS 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Cutting Thickness: 1.25 mm Collecting Tray Rear Paralleling Device via Handwheel Location: Arrives at Warehouse 54634 Bitburg - Available at Short Notice -

Condition: used, sheet width - max. 300 mm plate thickness 8 mm flat steel 80 x 10 mm Hjdpfouvd A Eex Afisnu blade length 300 mm machine length 860 mm machine height 565 mm weight of the machine ca. 172 kg Long measuring shear Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, working length: 3,000 mm, working width: 2,030 mm, total width: 1,100 mm, total length: 3,300 mm, total height: 2,720 mm, table width: 120 mm, overall weight: 1,200 kg, Edge Press, Beam Type SCM Falcon/S Specifications: Hnodpfsxn Tqvjx Afiou • Condition – Used, after inspection • Manufacturer – SCM • Model – Falcon/S • Maximum gluing dimensions – 300 x 203 cm • Remote control for pistons (independent vertical and horizontal control) • Double-T beams, 12 cm wide • Two vertical pistons with 60 mm diameter and two smaller horizontal pistons with 35 mm diameter • Maximum vertical piston pressure – approx. 15,000 kg • Maximum horizontal piston pressure – approx. 5,000 kg • Maximum pressure – 160 bar • Pump motor – 3.0 kW • Year of manufacture – 2002 • Overall dimensions: 335 x 110 x 272 cm (L x W x H) • Weight – approx. 1,200 kg Additional information: • Very good, factory technical and visual condition • The photos shown represent the actual item for sale • Possibility to power up and inspect the machine on site.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, throat depth: 177 mm, punching force: 50 t, punching diameter: 28 mm, Equipment: CE marking, Condition: Demo Hjdpsxn Srfofx Afisnu Pressure, tn: 50 Punching capacity: Ø28 mm. in 13 mm. Throat/reach: 177 mm. Flat bar: 350 x 15 mm. Round bar: Ø35 mm. Square bar: 30 x 30 mm. Angle iron: 80 x 80 x 8 mm. Notching unit: Triangular. Flatbar bender: 100 x 10 mm. Year: 2024 Country of origin: Spain. Size (L x W x H): 1300 x 1100 x 1850 mm. Weight: 1.000 Kg. Delivered with punching table, notching table, 1000 mm. electrical length stop and 10 sets of round punches and dies tool no. 6 (Ø4-Ø28 mm.). Has only been used for display.

Condition: ready for operation (used), Year of construction: 1978, Available immediately from location: LVD Hydraulic Guillotine Shear Type MVS 62/4 Year of manufacture 1978 Cutting length 6200 mm Material thickness 4.0 mm Digital backgauge 750 mm Drive 12.5 kW Hjdjxn Rw Hepfx Afisnu Weight 7500 kg Price: €5,500 plus VAT, ex location

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, open upper beam bending beam or upper beam manually adjustable according to sheet thickness Hnsdpfx Afspgmqisieu adjustable opening width of upper beam backgauge manually adjustable CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: CE marking, angle stop, emergency stop, finger protection, foot remote control, safety light barrier, Hydraulic Shear Brand: DURMA Hnsdsxn Rhropfx Afiou Type: DHGM3020 Sheet Length: 3000 mm Steel Thickness 37: 20 mm Voltage: 3x380V-50 Hz Length: 4450 mm Width: 3850 mm Height: 2450 mm Weight: 20,000 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Contact us to receive a quotation from the manufacturer for demolition attachments (pulverizers), either with or without rotation system included. Hodpfx Afjv Si Ivjienu

Condition: like new (used), functionality: fully functional, Year of construction: 2024, actuation type: hydraulic, throat depth: 175 mm, punching force: 45 t, punching diameter: 28 mm, overall weight: 800 kg, Equipment: CE marking, Condition: demo Pressure, tn: 45 Punching capacity: Ø28 mm. in 13 mm. Throat/reach: 175 mm. Flat bar: 300 x 10 /200 x 13 mm. Round bar: Ø30 mm. Square bar: 25 x 25 mm. Angle iron: 80 x 80 x 8 mm. Notching unit: Triangular. Year: 2024 Country of origin: Spain. Size (L x W x H): 1360 x 1100 x 1500 mm. Weight: 800 kg. Hjdpfxexn Sque Afionu Delivered with punching table, notching table and 10 sets of round punches and dies tool no. 6 (Ø4-Ø28 mm.). Has only been used for display.

Condition: used, A used well preserved guillotine shear Vöest Alpine cutting length: 2010 mm cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Hold down pressure: 30 bar Hodpfjpgmpdjx Afisnu number of hold-downs: 8 pcs. backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm weight: 2500 kg

Condition: new, functionality: fully functional, Year of construction: 2025, This is a special price for the Bauma. Stock is limited to 1 unit. If you order a second one, the price will be €27,500. Hodpjwh T D Sjfx Afionu Weight of the Pulverizer: 2300kg Excavator Tonnage: 28-35tons Rotation system is included

Condition: used, functionality: fully functional, Year of construction: 2007, control type: NC control, controller manufacturer: Maper, controller model: HT 0171 NC., working width: 3,100 mm, sheet thickness steel (max.): 10 mm, back gauge adjustment: motor-driven, power: 12 kW (16.32 HP), input voltage: 380 V, type of input current: three-phase, overall weight: 8,300 kg, total length: 3,900 mm, total width: 2,900 mm, total height: 2,300 mm, number of support arms: 2, Equipment: angle stop, emergency stop, finger protection, safety light barrier, Capacity: 3100 x 10 mm. Backgauge: Motorized, 1000 mm. Adjustable blade angle: Yes. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Control: Maper HT 0171 NC. Motor: 12 kW. Year: 2007 Country of origin: China. Size (L x W x H): 3900 x 2900 x 2300 mm. Hedpjxn Sf Ejfx Afijnu Weight: 8300 kg. With Light guard for back gauge, squaring and support arms.

Condition: new, Year of construction: 2023, The long boom mounted demolition shear is a hydraulically powered demolition tool designed specifically for demolition of tall buildings or hard-to-reach structures. These shears are usually mounted on long boom excavators and their powerful cutting capabilities facilitate demolition operations by cutting concrete, steel and other solid materials quickly and efficiently. Hodpfsqd Rbwox Afionu

Condition: used, functionality: fully functional, Year of construction: 1990, working width: 3,050 mm, sheet thickness steel (max.): 10 mm, back gauge adjustment: motor-driven, overall weight: 9,450 kg, Capacity: 3050 x 10 mm. Backgauge: Motorized. Adjustable blade angle: Yes. Hjdpfjxn Sdzex Afionu Adjustable cutting length: Yes. Adjustable blade gap: Yes. Year: 1990 Country of origin: France. Size (L x W x H): 3750 x 2600 x 1980 mm. Weight: 9450 kg. With squaring arm and support arm.

Condition: new, Year of construction: 2025, TANK SHEAR FOR 25-40tons Excavator Cutting Force - Blade Throat: 4300kN Cutting Force - Blade Center: 1900kN Cutting Force - Blade Tip: 1550kN Jaw Circuit - Max. Oil Pressure: 350bar Jaw Circuit - Max. Oil Flow: 225l/min Rotation Circuit - Max. Oil Pressure: 160bar Rotation Circuit - Max. Oil Flow: 40l/min Weight: 2800kg (including bracket, housing,jaw) Hodpowmw N Asfx Afienu

Condition: used, functionality: fully functional, Year of construction: 1985, working width: 4,000 mm, sheet thickness steel (max.): 13 mm, back gauge adjustment: motor-driven, overall weight: 20,000 kg, Capacity: 4000 x 13 mm. Backgauge: Motorized. Adjustable blade angle: Yes. Hnjdoxn Scqspfx Afieu Adjustable cutting length: Yes. Adjustable blade gap: Yes. Year: 1985 Country of origin: Denmark. Size (L x W x H): 4600 x 2300 x 2400 mm. Weight: 20 ton. With 2500 mm. squaring arm and support arm.

Condition: used, functionality: fully functional, Year of construction: 1978, working width: 3,000 mm, sheet thickness steel (max.): 10 mm, back gauge adjustment: motor-driven, overall weight: 9,200 kg, Capacity: 3000 x 10 mm. Backgauge: Motorized. Adjustable blade angle: Yes. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Year: 1978 Country of origin: Denmark. Size (L x W x H): 3450 x 2700 x 1900 mm. Weight: 9200 kg. Hnodjxn Sbtspfx Afiou With motorized back gauge, adjustable gap, cutting length and cutting angle. With 2 squaring arms, and 2 support arms.

Condition: used, functionality: fully functional, working width: 3,100 mm, sheet thickness steel (max.): 15 mm, back gauge adjustment: motor-driven, power: 22 kW (29.91 HP), overall weight: 13,500 kg, Capacity: 3100 x 15 mm. Backgauge: Motorized. Hnjdpoxn Sa Nefx Afiou Adjustable blade angle: Yes. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Motor: 22 kW. Country of origin: Netherlands. Size (L x W x H): 4250 x 3600 x 2000 mm. Weight: 13.500 kg. Manual adjustable blade angle, adjustable cutting length, and motorised blade gap. Light guard on backgauge.