Used Step Four for sale (5,412)

Condition: used, Cross table with mounted rotary table and stepper motor drive Rotary table, dividing attachment Precision positioning systems UHL Cross table UHL type KT5-NSOC Serial no.: 0008002 Table size: 145 x 145 mm Construction height: 62 mm Travel: 50 mm per axis Straightness/flatness: 5 μm - Drive per axis by 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (cross table) L x W x H: 200 x 200 x 62 mm Very good condition Rotary table UHL type B80 DT as dividing head Serial no.: 00080002 Rotary table: Ø 74 mm Construction height: 40 mm - Drive by 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (rotary table) L x W x H: 92 x 80 x 40 mm Fjdpfx Abow E Nw Ao Tjgk Dimensions with mounted rotary table L x W x H: 200 x 200 x 102 mm Weight: approx. 3 kg Very good condition

Condition: used, 6230-9-260 / 6230 9 250 / 62309250, VT-80 / VT 80 / VT80, Physik Instrumente GmbH & Co. KG Linear table with stepper motor Fsdpfxjq S T Ibj Ab Tsgk Model: 6230-9-260 Type: VT-80 Condition: Used

Condition: used, Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -stepper motor control Fsdeda Nyzopfx Ab Togk -Manufacturer: Phytron -Control comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -Screen keyboard -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/410/H132 mm -Weight: 17 kg

Condition: new, Year of construction: 2025, Stepfeeder MUL SF 3 For log diameter 10 - 50 cm Available in 2, 3, 4 or 5 sections Width starting from 1800 mm Height - minimum 1500 mm Heavy and solid constructed Hydraulic movement. Max 20 strokes per minute. Fedsv Ak Ifepfx Ab Tegk Fully automatic loading system with sensors and controller

Condition: used, Cross table with stepper motor drive Precision positioning systems UHL Cross table UHL type KT5-NSOC Series no. 0008002 Table size: 145 x 145 mm Table opening: 75 x 75 mm Height: 51 mm Travel: 50 mm per axis Fgedpoflrtpsfx Ab Tsk Straightness / flatness: 5 μm - Drive per axis via 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (cross table) L x W x H: 265 x 220 x 51 mm Weight: 3.5 kg Very good condition

Condition: as good as new (ex-display), 6230-9-250 / 6230 9 250 / 62309250, VT-80 / VT 80 / VT80, Physik Instrumente GmbH & Co. KG Linear table with stepper motor - As good as new Fgodpfxeq S T H Ne Ab Tsk Model: 6230-9-250 Type: VT-80 Condition: As good as new

Condition: used, Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -stepper motor control -Manufacturer: Phytron -Type: IXE-CT-Slave -Control comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/410/H132 mm Fsdpfeda Ny Dox Ab Togk -Weight: 16 kg

Year of construction: 2009, operating hours: 5,387 h, condition: ready for operation (used), functionality: fully functional, overall weight: 12,000 kg, total length: 15,000 mm, rotational speed (max.): 24,000 rpm, working length: 7,500 mm, Functions: Sawing, notching, milling, drilling, thread tapping, lock case machining TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions (milling cutter/drill, max. diameter/length): Ø 50 mm / 200 mm Tool dimensions (disc milling cutter, max. diameter): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of tool magazine slots: 16 Number of special tool slots: 2 Automatic clamping jaw positioning: Yes Number of clamping jaws: 8 Profile system with quick-change system: Yes Machining features Max. cross-section WxH / length for single bar machining: 400 x 300 mm / 7,500 mm Min. cross-section WxH / length for single bar machining: 30 x 30 mm / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Number of fixed profile stops: 2 Automatic clamping jaw relocation during 2 machining steps: Yes Fgjdpsx Azt Iofx Ab Tek Steel processing (up to 5 mm wall thickness): Yes Electronics / Software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows®, menu-driven: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (machining visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Operating hours: 20,616 h Spindle hours: 5,387 h

Condition: new, Year of construction: 2025, Description: Suitable for automatic grinding of plane blades, chisel blades, veneer knives, paper knives, and machine knives. Accessories: Paper band filter with Magbeta separator, capacity 300 liters 1 flange and 1 grinding disc 200 mm Ø ceramic. 1 flange for CBN / DIA grinding discs, 200 mm Ø Grinding length: 3100 mm Magnet width: 155 mm swivel range: 360° Grinding width: 275 mm grinding motor: 11.5 kW n = 1500 Grinding height: about 120 mm Grinding spindle speed infinitely variable: 1500 u/min Grinding conveyer speed continuously adjustable: 3 - 25 m/min Infeed: stepwise 0.005 – 0.2 mm slip ring diameter: 200 mm Connected load approx.: approx. 15 kW (400 V / 50 Hz) Dimensions W x D x H =: 5200 x 1500 x 1900 mm Weight approx.: 2600 kg Fedpfxjx E Skrj Ab Tjgk colour: Blue / Gray

Condition: used, functionality: fully functional, mileage: 304,100 km, power: 331 kW (450.03 HP), first registration: 07/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Fgjdpfxsx E N H Ro Ab Tsk Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: good (used), mileage: 66,356 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,490 mm, first registration: 08/2019, loading space length: 4,000 mm, loading space width: 1,780 mm, loading space height: 1,960 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: other, tire size: 225/75R16, number of seats: 3, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, traction control, trailer coupling, = Further options and equipment = - Electric windows - None - Partition wall Fgjdjx E Nx Tepfx Ab Tsk = Remarks = Configuration: 4x2, Payload: 1,374 kg, Kerb weight: 2,126 kg, Gross weight: 3,500 kg, Unbraked trailer load: 750 kg, Braked trailer load on central axle: 3,000 kg, Tow bar, Cabin type: single cab, Air conditioning, Number of airbags: 1, Parking aid: None, Electric windows, Partition wall, Radio/cassette, Colour: white, Rear view camera, Lighting type: halogen lamp, Bluetooth, Engine power: 103 kW (138 hp), Fuel: diesel, Euro 6, Drive technology: timing belt, Transmission: automatic, Power steering, ABS, ASR, starter battery, Rear step, Roof rack: none, Side doors: 1, Rear lock: double doors, Central locking, Number of seats: 3, Seating arrangement: 1+2, Seat upholstery: fabric, Seat adjustment: manual, Tyre type: summer tyres = Further information = General information Number of doors: 1 Registration number: VHT-56-L Axle configuration Brakes: disc brakes Axle 1: Tyre size: 225/75R16; Tread depth left: 5 mm; Tread depth right: 5 mm; Suspension: coil spring Axle 2: Tyre size: 205/75R16; Tread depth left: 4 mm; Tread depth right: 4 mm; Suspension: leaf spring Dimensions Dimensions (L x W x H): 700 x 199 x 259 cm Weights Unladen weight: 2,126 kg Payload: 1,374 kg Gross vehicle weight: 3,500 kg Functional Loading height: 60 cm Maintenance APK (Technical inspection): valid until 09/2026 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial information Lease price: €335 per month (bestelbus, 72 months); Please ask for additional information and conditions.

Condition: used, Hydraulic feed gear suitable for Harbs woodworking machines or similar. The gear allows for manual, stepless adjustment of the feed or gear speed. Fgedpswktmrefx Ab Tek

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Fodpfsw U Ry Njx Ab Tegk Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: ready for operation (used), Year of construction: 2016, General Data Machine weight 11000 kg Fedpfxjx E Egmo Ab Tsgk Measurements height 3100 mm Control Unit Brand FANUC Model Series 0i-TD Dimensions Machine Length 2750 mm Main Drive Spindle motor power 30 kW Number of axis 2 This DEFUM KNA-110 S0 vertical turning machine was manufactured in 2016. It features a maximum swing with upper support of 1350 mm and a table diameter of 1100 mm, supporting workpieces up to 4000 kg. The table speed range is 6.3–200 rpm with 16 speed steps. Main motor power is 30 kW. If you are looking to get high quality turning capabilities consider the DEFUM KNA-110 S0 machine we have for sale. Contact us for more information. Application Types Turning

Condition: new, weight max. 5000 kg table turning speeds 6.0 - 60.0 m/h roll diameter 250 mm Wheel width 120 mm workpiece diameter 250 - 2800 mm total power requirement 0.75 kW weight ca. 300 kg Fedpsxab Awefx Ab Tjgk range L-W-H ca. 4165 x 1360 x 1200 mm Stable turning The HGK_Series has two synchronously working drive units that are used for ensure continuous rotation with stepless speed control. Of the Roller spacing can be increased and decreased manually using locking pins to achieve a large diameter range of the workpieces. Characteristics: - For rotating and positioning - in the field of machine, container, plant and pipeline construction - Two synchronously running drive motors - Adjustable rotation speed. - PU castors - Adjustment is via bolts - Remote control Scope of delivery: - 1x controller - 1x driven unit - 1x traveling unit

Condition: used, Year of construction: 2002, weight max. 10 / 20 (einzeln / Satz) t workpiece diameter Ø250 - Ø4600 mm gear diameter 380 mm turning speed drive gear steples 130 - 1300 mm/min total power requirement 2x 0,75 kW weight of the machine ca. 750 kg / 500 kg Steel rollers, dia. 380 mm Idle rollers with motor driven displacement of rollers Fgedswg Hprepfx Ab Tsk Continously variable speed of drive rolls

Condition: good (used), mileage: 184,287 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,670 mm, first registration: 05/2020, loading space length: 3,320 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: steel, tire size: 235/65R16, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, traction control, = Additional Options and Equipment = - Electric windows - Electric mirrors - None - Partition wall = Notes = Configuration: 4x2, Curb weight: 2,386 kg, Gross weight: 3,500 kg, Cabin type: single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: front and rear, Electric windows, Electric mirrors, Partition wall, Radio/cassette, CarPlay, GPS navigation, Color: white, Reversing camera, Lighting: halogen lamps, Climate control, Seat heating, Bluetooth, Blind spot sensor, Engine power: 120 kW (161 Hp), Fuel: Diesel, Emissions Standard: Euro 6, Drive system: timing chain, Transmission: automatic, Power steering, ABS, ASR, starter battery, Body type: extended and raised, Rear step, Roof rack: none, Side doors: 1, Rear closure: double doors, Central locking, Seating capacity: 3, Seat configuration: 1+2, Upholstery: fabric, Seat adjustment: manual, L2H2 Navi RWD Camera Automatic Cruise A/C Euro6 163 HP!, Spare wheel, Tire type: summer tires = Further Information = General Information Number of doors: 1 Registration number: KLEYN1 Axle configuration Tire size: 235/65R16 Brakes: disc brakes Suspension: leaf spring Axle 1: Tire tread left: 6 mm; Tire tread right: 7 mm Axle 2: Tire tread left: 6 mm; Tire tread right: 5 mm Dimensions Dimensions (L x W x H): 593 x 202 x 264 cm Weights Fsdpfxox E Nxye Ab Tegk Empty weight: 2,386 kg Payload: 1,114 kg Gross vehicle weight: 3,500 kg Functional Loading height: 61 cm Maintenance MOT (general technical inspection): valid until 05.2026 Condition Technical condition: good Visual condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €360 per month (panel van, 72 months); Please inquire for further information and terms.

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06 03 1000, Country of manufacture: CH Voltage: 400V Dimensions: 1200 x 1650 x 2050 mm Net machine weight: 1900 kg TECHNICAL SPECIFICATIONS Machine: Disc rotation speed: 0–110 rpm Maximum drive power for discs: 2 kW Maximum upper disc load: 20 daN Disc diameter: Ø 450 mm Internal drive rotation speed: 0–115 rpm Maximum internal drive power: 0.5 kW Disc drive motors (continuous motor): Type: DC motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 2 kW External ventilation: 220V, 50/60 Hz Internal drive motor: Motor type: smooth operating mid-position control motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 0.5 kW Separate ventilation: 220V, 50/60 Hz Vertical drive motor: Type: stepper motor Steps per second: 50 Torque: 1100 Nm Crown gear adjustment: Type: AC brake motor 2 positions Voltage: 380V / 50 Hz Rotation speed: 700–1400 rpm Power: 0.25/0.37 kW DC brake: 24V Braking torque: 16 Nm Power converters: Input voltage: 380V / 50 Hz Induced voltage: 270 V Field voltage: 340 V Worm gear reduction ratio (internal drive): Ratio: i = 1 : 30 Worm gear reduction ratio (lower system): Ratio: i = 1 : 15.5 Worm gear reduction ratio (upper system): Ratio: i = 1 : 15.5 Operating pressure: Air circuit: 6–7 bar Lapping fluid pump: Connection voltage: 380V 50Hz Rotation speed: 2600 rpm Flow rate: 57 L/min Protection: IP 44 Control and measurement device: Measurement range: 6 (±3 to ±11000 mm) See details in Millitron user manual Inductive probe: Measurement range: ±2 mm Setpoint adjustment device: Display: 4 digits Unless stated otherwise, all technical data are provided without guarantee and subject to change or error. Fedpfx Aew T Tpdjb Togk

Condition: good (used), mileage: 303,529 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,330 mm, first registration: 02/2019, loading space length: 4,300 mm, loading space width: 1,760 mm, loading space height: 1,910 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: steel, tire size: 235/65R16, number of seats: 2, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, traction control, = Additional options and equipment = - Electric windows - Electric mirrors - None = Remarks = Fgsdsx E Nxtopfx Ab Tok Configuration: 4x2, Payload: 1,150 kg, Unladen weight: 2,350 kg, Gross weight: 3,500 kg, Trailer load, unbraked: 750 kg, Central axle trailer load, braked: 2,000 kg, Cabin type: single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: none, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Colour: white, Reversing camera, Lighting: halogen lamp, Climate control, Bluetooth, Blind spot sensor, Engine power: 105 kW (141 hp), Fuel type: diesel, Emission standard: Euro 6, Drive technology: timing chain, Transmission type: automatic, Power steering, ABS, ASR, Starter battery, Body type: extra high and extended, Rear step, Roof rack: none, Side doors: 1, Rear closure: double doors, Central locking, Seats: 2, Seating arrangement: 1+1, Seat upholstery: fabric, Seat adjustment: manual, AC automatic, EURO6, camera, cruise control, Spare wheel = Further information = General information Number of doors: 1 Registration number: V-955-VV Axle configuration Tyre size: 235/65R16 Brakes: disc brakes Suspension: leaf spring suspension Axle 1: Tyre tread left: 3 mm; Tyre tread right: 3 mm Axle 2: Tyre tread left: 2 mm; Tyre tread right: 2 mm Dimensions Dimensions (L x W x H): 715 x 205 x 265 cm Weights Unladen weight: 2,350 kg Payload: 1,150 kg Gross vehicle weight: 3,500 kg Functional Loading height: 68 cm Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm Fsdpfxew T Sc No Ab Tsgk WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NT315HF0043, Control MSX-711 (Fanuc 3Li) for 5axes simult. Spindel A2-5 40 pos. ATC type Capto C5 Bar-feeder LNS MoveS2 INVENTORY NR.2180207, MACHINE EQUIPPED WITH : Control MSX-711 (FANUC 3Li) for 5 axes simultaneous machining, color screen 15’’ and dialog system MAPPS III Memory capacity up to 1000 programs Options : tools correctors (milling spindle), B tools life gestion, input of tools correctors G10, 3 interpolations, variable thread step (G34), circular threading, personalised macro, high precision contouring control (control II contour AI), card ATA 1 GB, offset tool for 5 axes machining Chips conveyor (with chain) model/500 B-axis with direct motor (DDS) ATC type CAPTO C5/ 40 positions Tools to zero setting system with automatic arm for milling spindle High-pressure cooling system type KNOLL with 500L tank, pump and paper filtration, for cooling through spindle centre Cutting fluid coolant unit Type KNOLL Linear measuring system for Axes X1 / Y / Z1 Tool monitoring system through control of main spindle motor and feed motors Automatic workpiece measuring system with touch-test RENISHAW and macro B for use in Milling spindle Light signal Automatic machine stop Workpieces receptor vat Ø52mm, L120mm 10 additional M functions Fodod Hkucepfx Ab Tegk Flange for cylinder, threaded ring, traction tube, bore Ø 52 Clamping chuck HAINBUCH Spanntop Axzug Nova, with stop type 100 for pieces in chuck and for jobs in bars with passage, clamping head type 32, A2-5 direct mounting, adapter Hydraulic chuck KITAGAWA, type BB206A5, Ø170mm, A2-5 direct mounting, passage Ø52mm Bar-feeder LNS, Type Move S2 Diameter of roung bars : Ø8 – 80 mm, bars length : 700 mm – 1600 mm ; loading from the front ; longitudinal shift : 470 mm ; set of guidings Ø18-20 Ø24-26 and Ø28-30 ; pushers : 1x Ø 8 – 1x Ø 15 mm ; guiding devices for main spindle Ø 21 – 26 and 31 mm Fire extinctor through carbonic gas type Tyco KLA III with 10kg CO2 Aspiration system ELBARON RON/A 3000 D-2H with full rest

Condition: refurbished (used), Year of construction: 2004, machine/vehicle number: 350735, Manufacturing origin Swiss Voltage 380/50/3 Netweight 1570 kg Custom position 8458.1120 Dimensions 1830x1260x1700 mm TECHNICAL DATA Capacities Max. turning diameter Ø 270 mm Max. swing over carriage Ø 115 mm Centre height over carriage 60 mm Turning length B32 265 mm Headstock A2-4 Spindle for Schaublin collets W20 / W25 / F38 / B32 Spindle speed, continuous 50 - 5'000 min-1 Spindle inner diameter (without chuck key) 39 mm Max. bar passage in collet W20 14,5 mm Max. bar passage in automatic chuck 32 mm Max. recommended turning diameter 200 mm Pneumatic clamping Adjustable axial clamping force, force at 5 bar 1'150 daN Cross slide Cross travel, X axis 180 mm Resolution, X-axis (at radius) 0,0005 mm AC motor drive, continuous / intermittent torque 4 / 14 Nm Ball screw, diameter x pitch Ø 20 x 5 mm Longitudinal travel, Z axis 390 mm Resolution, Z axis 0.001 mm AC motor drive, continuous / intermittent torque 4 / 14 Nm Ball screw, diameter x pitch Ø 32 x 5 mm Feed rates Working feeds, X and Z axis, stepless 0 - 5 m/min Rapid feeds, X and Z axis 8 m/min Feed forces, X / Z axis, continuous 503 / 503 daN Tooling system: Revolver Standardised tool holder attachment VDI 20 Number of tool stations 8 Number of live tool stations 4 AC motor drive, continuous / intermittent 0.55 / 1.1 kW Spindle speed, stepless 30 - 5'000 min-1 Max. tool cross-section 16 x 16 mm Integrated coolant and indexing in both directions yes Cooling Tank capacity 55 L Pump capacity 10 L/min Pressure 1.7 bar Pneumatic tailstock Taper of the spindle sleeve Morse 3 Spindle outer diameter 45 mm Fgjdpfx Abjhr Rtne Tek Spindle stroke 70 mm Adjustable contact force 25 - 260 daN Tip height from ground 1'162 mm errors and omissions excepted data gived without obligation

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 9912804, SURFACE LAPPING MACHINE "STAEHLI" TYPE FLM-1000 Manufacturing origin Swiss Voltage 400/50/2 Netweight abt.2500 kg Dimensions 1500x2000x2180 mm Total power Custom position 8460.40 20 TECHNICAL DATA Fodpfsd A Tp Sex Ab Tjgk Polishing discs, ext.dia. 1000 mm 3 straightening rings, inn.dia. 400 mm Speed of polishing discs 60 min-1 Time-regulator, 6 steps 0 – 60 h Driving main motor 7,5 kW Pivoting control-desk Special equipment Polishing discs speed, continuous 0 – 60 min-1 Pneumatic, 3 cylinders, adjustable 50 – 2700 N Preprogrammation Pressure load, 3 step Air pressure 6 bar Cooling, tank cap. 150 Lt Load and unload table Change device Cycle load-change-unload device Polishing systems errors and omission excepted-data given without obligation

Condition: good (used), Year of construction: 1998, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 107.40.98.165, Year 1998 Heidenhain TNC 430 710x500x500 mm - 42000 RPM Netweight 5670 kg Dimensions 2794x2997x3035* mm TECHNICAL DATA Table Dimensions 1220 x 457 mm Admitted load 1575 kg T-grooves 14 mm Number of T-grooves 5 Travels Longitudinal X 1016 mm Transverse Y 508 mm Vertical Z 635 mm Workspindle Power of AC-motor, 2-stepped gears 11kW Speed range, continuous 10-7500 min-1 Spindle speed (option) 10'000 rpm Taper ISO40 Feeds drive Feed programmable axes X, Y & Z 0 – 7620 mm/min Rapid feed axes X, Y, Z 18,0 m/min Automatisation Tool changer 20 pos Tool changing time (for nearby posts) 5,0 sec. errors and omissions excepted-data given without obligation Fgodpfxscl Rurj Ab Tjk Inventory Nr.4112006, machine equipped with  : NC Heidenhain TNC430M Milling spindle 42’000 min-1, HSK 40 E 36 tool positions Electronical handwheel Tool measuring Renishaw TS27 Ethernet card Minimal quantities greasing Unilube Aspiration Lumestat Protection cabin Rotary table Air passage through rotary table Vacuum clamping (by external provider) Spray gun Chips conveyor

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341966, Country of manufacture: Switzerland Voltage: 400/50/3 Net weight: 2640 kg Customs tariff number: 8458.1120 Dimensions: 2301 x 1438 x 1676 mm TECHNICAL SPECIFICATIONS Fodsw T Smhepfx Ab Tegk Capacities: Maximum turning diameter: 330 mm Maximum diameter admitted over cross slide: 160 mm Center height over cross slide: 83 mm Maximum diameter admitted over bed: 430 mm Turning length (depending on equipment): 650 mm Headstock: Standardized spindle nose, suitable for use with various collets and chucks using adaptation accessories. Collet accessories (SCHAUBLIN): B45/F48 Maximum bar capacity, diameter: 36 mm / 42 mm Automatic chuck, standard diameter: 170 mm Direct drive via AC motor, power at 100% / 50% duty: 15 / 18.5 kW Maximum torque at 100% / 50% duty: 135 / 165 Nm Maximum spindle speed: 5000 rpm C axis: Pneumatic clamping cylinder: 2700 daN Cross slide: Transverse travel, X axis: 240 mm Radial resolution: 0.0005 mm AC motor drive, nominal torque: 3 Nm Ball screw, diameter x pitch: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm AC motor drive, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feeds: Stepless working feeds, X/Z axes: 0–5000 mm/min Rapid traverse feeds, X/Z axes: 8 / 10 m/min Feed force, X/Z axes: 420 / 670 daN Turret tool system: Number of tool stations: 8 Standardized tool holder mounting: VDI 30 Max. tool shank size: 20 x 20 mm Integrated coolant Indexing in both rotation directions Coolant system: Tank capacity: 120 liters Pump flow rate: 10 l/min Pressure: 5 bar Unless otherwise specified, the above technical details are provided without commitment or liability.