Used Step Four for sale (5,419)

Condition: used, Polygonmach stationary hot mix asphalt plant refers to an asphalt plant that is fixed in one location and produces hot mix asphalt continuously. It is not portable and is typically used for large-scale asphalt production projects. Capacity vary from 60-400 tph. The functions of Polygonmach stationary asphalt plant includes: Aggregate Storage and Handling: The plant has storage bins or silos to store various sizes of aggregates. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are dried and heated in a drum or a dryer to remove moisture and bring them to the desired temperature for proper asphalt mixing. Asphalt Binder Storage and Heating: The plant has storage tanks for storing the asphalt binder, which is heated to a specified temperature before mixing with the aggregates. Mixing: The heated aggregates and asphalt binder are mixed together in the plant to produce the hot mix asphalt. The mixing can be done in a batch or continuous process, depending on the type of plant. Storage and Loadout: The hot mix asphalt is stored in silos or storage bins until it is ready for loadout onto trucks for transportation to the construction site. Usage areas for Polygonmach stationary asphalt plants include road construction, highway projects, airport runways, parking lots, and other large-scale asphalt paving applications. Dwsdpfsx D A D Rjx Ab Tof The operation of Polygonmach stationary asphalt plant typically involves the following steps: Aggregates are stored in the designated bins/silos of the plant. The aggregates are fed into the drying drum, where they are heated and dried. The heated aggregates are then transported to the mixing unit. Options: stationary, continuous Capacity: Max.: 400 t/h(245 lb/s)Min.: 60 t/h(37 lb/s)

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current (min.): 30 A, welding current (max.): 400 A, For sale: OTC DP400 30-400 AMP 50% ED 400A 60% ED 365A 100% ED 283A 400 Volt Water-cooled Pulse Synergic Dwsdpfx Absx Ea I Aj Tjf 2/4 Step 4 Roller drive Pre gas Post gas Start current End current Spot welding Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished, serviced, & tested Production date: 2007 Including PRO5000 Welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Dwjdpfxjx Eaxbe Ab Tsf Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. Dedpfxsx D Uz Io Ab Tjwf As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: ready for operation (used), Year of construction: 2010, Control Unit Brand HEIDENHAIN Model TNC 530 Main Drive Number of axis 3 Spindle Speed 10000 RPM Tool taper ISO 40 Movement X-Axis Movement 1016 mm Z-Axis Movement 710 mm Y-Axis Movement 610 mm Table Table load 700 kg This 3-axis MAS MCV 1016 QUICK was manufactured in 2010. It features a table size of 1300 × 600 mm, with a maximum travel of 1016 mm in the X-axis, 610 mm in the Y-axis, and 710 mm in the Z-axis. The spindle supports a speed range of 20–10000 rpm with stepless speed change. It can handle a maximum table load of 700 kg. If you are looking to get high-quality milling capabilities consider the MAS MCV 1016 QUICK machine we have for sale. Contact us for more information. Application Types Djdpfx Aox D Hckob Tewf Milling

Condition: new, The Mark Super S, part of the Conventional Vertical Milling Machines category, excels as a mill drill with robust capabilities. This versatile machine is perfect for a wide array of applications, including drilling and milling of steel and non-ferrous metals. With its motorized cutter head movement and hand-wheel for precise positioning, the Mark Super S ensures that you can achieve accurate results every time. It features an infinitely variable feed on the X-axis, coupled with an automated drilling feed and a clear digital depth display for ease of use. The swiveling head allows for extensive maneuverability, while the gearbox milling head delivers powerful machining capabilities. Enhanced productivity is assured with dual gear steps for high torque, a 3-axis position indicator, and an intuitive operator interface. Even after 15 years of popularity, the Mark Super S remains a top choice for workshops and educational settings. Request a quote today to explore the advantages this mill drill can bring to your operations. Dodjqcuc Tjpfx Ab Towf

Condition: used, Polygonmach stationary hot mix asphalt plant refers to an asphalt plant that is fixed in one location and produces hot mix asphalt continuously. It is not portable and is typically used for large-scale asphalt production projects. Capacity vary from 60-400 tph. The functions of Polygonmach stationary asphalt plant includes: Aggregate Storage and Handling: The plant has storage bins or silos to store various sizes of aggregates. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are dried and heated in a drum or a dryer to remove moisture and bring them to the desired temperature for proper asphalt mixing. Asphalt Binder Storage and Heating: The plant has storage tanks for storing the asphalt binder, which is heated to a specified temperature before mixing with the aggregates. Mixing: The heated aggregates and asphalt binder are mixed together in the plant to produce the hot mix asphalt. The mixing can be done in a batch or continuous process, depending on the type of plant. Dwodpex D A Ebefx Ab Tsf Storage and Loadout: The hot mix asphalt is stored in silos or storage bins until it is ready for loadout onto trucks for transportation to the construction site. Usage areas for Polygonmach stationary asphalt plants include road construction, highway projects, airport runways, parking lots, and other large-scale asphalt paving applications. The operation of Polygonmach stationary asphalt plant typically involves the following steps: Aggregates are stored in the designated bins/silos of the plant. The aggregates are fed into the drying drum, where they are heated and dried. The heated aggregates are then transported to the mixing unit. Options: stationary, continuous Capacity: Max.: 400 t/h(245 lb/s)Min.: 60 t/h(37 lb/s)

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 210 A, welding current at 100% duty cycle: 170 A, welding current (min.): 3 A, welding current (max.): 270 A, For sale: Castolin Eutectic TotalArc 3000² 3-270 AMP 400 Volt Pulse Synergic Water-cooled 2/4 Step 4 Roller drive Pre gas Post gas Dwsdpfxex Ea Iie Ab Tjf Spot welding Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished – Serviced – Tested Including PRO5000 welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) Djdpjx Eabpsfx Ab Tjwf For further questions, feel free to contact us by phone.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. Dedpfxex D Uqce Ab Tewf * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Year of construction: 2008, condition: ready for operation (used), General Data Measurements depth 3900 mm Measurements width 2000 mm Measurements height 1900 mm Control Unit Brand HAAS Main Drive Spindle speed range 3400 Spindle bore 103 mm Number of axis 2 Workpiece Workpiece drm over bed 762 mm Dwjdpfxjx D S E Ro Ab Tsf Additional Equipment 2-step gearbox 3 jaw chuck + collet chuck Barfeed magazine Samsys This HAAS SL-30TBHE was manufactured in 2008. A robust horizontal turning machine featuring a spindle speed of 3400 1/MIN, 22 kW motor power, and a swing over bed of 762 mm. It includes a 12-position turret, hydraulic tailstock, and both 3 jaw and collet chucks. Dimensions are 3900x2000x1900 mm. Consider the opportunity to buy this HAAS SL-30TBHE horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2021, MTE FBF-S7000 cross-slide milling machine: Control: HDH TNC640 HSCI Travel: X- 7,000 mm Y- 1.300 mm Z- 1.500 mm Djdex Dzadspfx Ab Tjwf Clamping surface: Length: 6000 mm Width: 1100 mm Height: 850 mm Automatic milling head: diagonal (swiveling in 2 levels) Speed range: 0-5000 RPM 5000-6000 RPM Swivel positions: 0.001° x 0.001° 360.000 diagonal and vertical joint positions Tool holder: ISO50 Main spindle drive water-cooled Speed regulation: stepless Spindle speed: 20 - 6000 rpm Tool changer: 80 positions Increased coolant pressure (IKZ) to 70 bar chip conveyor Further data available on request!

Condition: used, Year of construction: 2024, Field of application: Construction Polygonmach stationary hot mix asphalt plant refers to an asphalt plant that is fixed in one location and produces hot mix asphalt continuously. It is not portable and is typically used for large-scale asphalt production projects. Capacity vary from 60-400 tph. The functions of Polygonmach stationary asphalt plant includes: Aggregate Storage and Handling: The plant has storage bins or silos to store various sizes of aggregates. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are dried and heated in a drum or a dryer to remove moisture and bring them to the desired temperature for proper asphalt mixing. Asphalt Binder Storage and Heating: The plant has storage tanks for storing the asphalt binder, which is heated to a specified temperature before mixing with the aggregates. Mixing: The heated aggregates and asphalt binder are mixed together in the plant to produce the hot mix asphalt. The mixing can be done in a batch or continuous process, depending on the type of plant. Dwodjx D A D Djpfx Ab Tof Storage and Loadout: The hot mix asphalt is stored in silos or storage bins until it is ready for loadout onto trucks for transportation to the construction site. Usage areas for Polygonmach stationary asphalt plants include road construction, highway projects, airport runways, parking lots, and other large-scale asphalt paving applications. The operation of Polygonmach stationary asphalt plant typically involves the following steps: Aggregates are stored in the designated bins/silos of the plant. The aggregates are fed into the drying drum, where they are heated and dried. The heated aggregates are then transported to the mixing unit. Options: stationary, continuous Capacity: Max.: 400 t/h(245 lb/s)Min.: 60 t/h(37 lb/s)

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current (min.): 10 A, welding current (max.): 300 A, For sale: Rehm Megapuls Focus 300 10-300 AMP 400 Volt Pulse Double Pulse Focus Arc Synergic Water-cooled 2/4 Step 4 Roller drive Down slope Spot welding Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished – serviced – tested Including PRO5000 welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Visits by appointment only. Test welding is possible. Djdpfx Abex Ea Ezj Tjwf A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz Dwjdpfjx D Abpjx Ab Tsf • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm Dedpfx Abex D Ucxs Towf tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 4413 Measurements depth 5860 mm Measurements height 2263 mm Machine weight 14500 kg Control Unit Brand BOSCHERT Main Drive Maximum sheet thickness 6 mm Movement X-Axis Movement 3430 mm Y-Axis Movement 2670 mm Z-Axis Movement 1500 mm Additional Equipment 8 Station Automatic Tool Change tooling, system TRUMPF Rotation with stepless Index (360°) of all tools Up to 64 Tools available (with Revotools) Very short time for tool change All standard Trumpf tools may be used Clamp system for automatic material handling with 2 clamps Stepless programmable clamp positioning Automatic repositioning of the clamps with 2 sheet hold downs for sheets up to 9999 mm This BOSCHERT Multipunch 1500 x 3000 was manufactured in 2011. A robust CNC punching machine, it offers precision and efficiency for your sheet metal operations. Ideal for a variety of punching applications, ensuring consistent performance. Contact us for more information. Dedpfx Aox D Dn Dob Towf Application Types Punching

Condition: good (used), Paper cutting guillotine Ideal 6660 The machine is 100% functional, after inspection like new. This is currently produced, the newest model. A spare knife included. Technical data: working width: 650mm stack height: 80mm minimum remnant: 25mm max. distance of the saddle from the knife: 610mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation. Djdpfxowud R No Ab Towf

Condition: good (used), Year of construction: 1988, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min Dsdjx D T Nqjpfx Ab Tewf rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 53 / 50 mm Spindle motor power 7.5 / 10 kW Spindle bore 53 / 50 mm Number of axis 2 Djdpfx Aex D Hzaeb Towf Movement X-Axis Rapid Traverse 10 m/min Z-Axis Rapid Traverse 10 m/min Workpiece Workpiece drm over bed 400 mm This EMCO Emcomat E-200 was manufactured in 2016. A robust horizontal turning machine featuring a swing over bed of Ø 400 mm and a distance between centers of 1000 mm. It offers a spindle speed range of 50–4000 rpm with stepless speed control and a spindle bore diameter of Ø 80 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcomat E-200 machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Universal lathe Harrison M250 The machine is in very good condition, not used in production. It served as an auxiliary machine in the maintenance department of the printing house. Technical data: Turning diameter over the bed: 280 mm Turning diameter over the slide: 170 mm Turning Length: 680MM Dwodsu R Udwopfx Ab Tof Rotation speed: 40 – 1500/9 step U / min Spindle bore: 35 mm Tailstock taper MK: 3 Tailstock quill travel: 95 mm Total power requirement: 1.5 kW Machine weight approx .: 410 kg Dimensions L x W x H: 1.6 x 0.8 x 1.4 m The machine is equipped with an electronic position reading Insize ISL-DR2

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details grinding length 2000 mm grinding width 850 mm distance spindle center to table 900 mm control Siemens 840 D total power requirement 155 kVA weight of the machine ca. 15 t dimensions of the machine ca. 8815 x 4185 x 2963 mm Additional information CNC Precision Surface and Profile Grinding Machine Technical Specifications: Grinding length 2000 mm Grinding width 850 mm Travel, transverse 750 mm Distance from table to spindle center 900 mm (or 800 mm with intermediate plate) Magnetic plate size 2000 x 700 mm Table load without magnet 3500 kg Table speed 60 m/min. Spindle drive 26 kW Grinding wheel dimensions 500 x 150 x 203.2 mm Grinding wheel peripheral speed 35 m/s Equipment: 3-axis contouring control Siemens 840 D Grinding programs: Full-cut grinding Face grinding Plunge grinding Path grinding X/Y-axis and Y-Z-axis Profile grinding Automatic program sequence with roughing, finishing, fine finishing and spark-out grinding. Multiple plunge grinding for economical production Surface grinding with continuous, continuously programmable cross feed Grinding wheel calibration Plunge/step grinding Face grinding Dressing in the grinding cycle with lift-off amount Fully automatic compensation of dressing amounts Tool management AC servo drives with ball screw and absolute measuring system in the X, Y, and Z axes Dwsdex D Tycjpfx Ab Tjf Preloaded precision roller guides in the X, Y, and Z axes with linear guides Portable electronic handwheel Automatic belt filter system Coolant heating Electro-permanent magnetic chuck Fully enclosed Direct measuring system in the vertical axis Temperature-controlled machine bed for consistent accuracy Linear motor in the X-axis, table speed max. 60 m/min. Swiveling control panel Continuous speed control of the grinding spindle Electrical linear measuring device for cross-travel adjustment with zero point setting in any position, resolution 0.001 mm Electro-mechanical locking via position control of the headstock in the cross direction for profile and plunge grinding Mechanical extraction of coolant mist TAG table dresser Pre-profiling dresser VPG 190 Diamond grinding wheel, 190 mm diameter Software program for pre-profiling dresser VPG Rough profiling (roughing) CNC table profile dresser TAD 190 Profile depth max. 45 mm Contour accuracy +/- 0.0025 mm Swivel angle +/- 65 degrees Max. dressing speed 210 mm/min. Diamond wheel for table dressing machine TAD 190 Regrinding package for diamond wheel Intermediate plate for raising the magnet WinWop profiling software Import of CAD profile data SP 60 JOB Listing expansion package Additional holes for the magnet clamping plate to facilitate removal of workpieces using compressed air Ghost shift circuit for shutting down the machine after the end of the program

Condition: ready for operation (used), Year of construction: 2011, Main Drive Dwodex D St Uopfx Ab Tsf Number of axis 3 Turret Number of turrets 1 This 3-axis Citizen A32VIIPL swiss type turning machine was manufactured in 2011. It features a FMB turbo 3-36 / 3200 C turbo bar feeder, a maximum machining diameter of 32 mm, and a spindle through-hole diameter of 36 mm. The machine offers high-speed operations with main and back spindle speeds up to 8,000 min, both featuring stepless speed changes and C-axis control for precise indexing. If you are looking to get high-quality turning capabilities, consider the Citizen A32VIIPL machine we have for sale. Contact us for more information. Application Types Turning

Condition: like new (used), Ideal 5255 paper cutting guillotine The machine is 100% operational, after a review in very good condition. This is the currently produced model, the latest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max distance between the saddle and the knife: 520mm power supply 230V Basic features: 99 programs, each 99 steps Dsdpeu Ul Uxofx Ab Tewf data entry via LCD touch screen electronic digital display with an accuracy of 1/10 mm electronic handwheel with stepless speed adjustment of the backgauge mm/inch switching Electromechanical drive of the knife and pressure beam Transparent safety covers laser cutting line two-hand cutting start, electronically controlled automatic return of the knife from any position Additional equipment includes: side tables, a spare knife, a split, tools for replacing the knife, including a safe grip, tapping block and documentation.

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 3120 mm Measurements depth 2505 mm Measurements height 4125 mm Machine weight 5530 kg Main Drive Number of axis 3 Movement X-Axis Movement 1500 mm Y-Axis Movement 2000 mm Z-Axis Movement 1200 mm Table Table load 4500 kg Additional Equipment 3-axis CNC controller, Pantec SP25/SP600 interface, EAGLE PAD joystick (6.5 m) Renishaw PH10M (720 positions, 7.5°) + PHC10-2 controller Renishaw SP25M full kit: SM25-1/-2/-3 (with SH25-1/-2/-3), TM25-20 adapter; extra SM25-4 (with SH25-4) & SM25-5 (with SH25-5) Extensive M2/M3 stylus kits (Ø 0.3–30 mm, extensions), M2↔M3 / M3↔M2 adapters FCR25 + FCR25-TC (3+3-port, temperature-controlled) with MRS1000/MRS600 rail system Ø 30 mm reference sphere INCA3D Premium (DCC): Shape Deviation, Path Wizard, Simulation, Statistics, Excel reports, graphical programming, CAD import IGES/STEP, Master Scan Functions + Assist SP25, FCR25 support, USB dongles (HASPHL) Industrial PC (e.g., Intel i5, 8 GB, 256 GB SSD, 22″ monitor, Windows 10) + color laser printer General Data Dodpfx Abox D S Dmo Towf Measurements width 3120 mm Measurements depth 2505 mm Measurements height 4125 mm Machine weight 5530 kg Main Drive Number of axis 3 Movement X-Axis Movement 1500 mm Y-Axis Movement 2000 mm Z-Axis Movement 1200 mm Table Table load 4500 kg Additional Equipment 3-axis CNC controller, Pantec SP25/SP600 interface, EAGLE PAD joystick (6.5 m) Renishaw PH10M (720 positions, 7.5°) + PHC10-2 controller Renishaw SP25M full kit: SM25-1/-2/-3 (with SH25-1/-2/-3), TM25-20 adapter; extra SM25-4 (with SH25-4) & SM25-5 (with SH25-5) Extensive M2/M3 stylus kits (Ø 0.3–30 mm, extensions), M2↔M3 / M3↔M2 adapters FCR25 + FCR25-TC (3+3-port, temperature-controlled) with MRS1000/MRS600 rail system Ø 30 mm reference sphere INCA3D Premium (DCC): Shape Deviation, Path Wizard, Simulation, Statistics, Excel reports, graphical programming, CAD import IGES/STEP, Master Scan Functions + Assist SP25, FCR25 support, USB dongles (HASPHL) Industrial PC (e.g., Intel i5, 8 GB, 256 GB SSD, 22″ monitor, Windows 10) + color laser printer This 3-Axis Mora Primus 152012 was manufactured in 2019. It features a large measuring range with X-axis at 1500 mm, Y-axis at 2000 mm, and Z-axis at 1200 mm. Supports a maximum load of 4500 kg, ensuring robustness for various tasks. With a vector speed up to 519 mm/s, it offers efficient operations. If you are looking to get high quality measuring capabilities consider the Mora Primus 152012 machine we have for sale. Contact us for more information. Application Types Measuring