Four-way forklift

Hubtex MQ50

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 10,490 h, load capacity: 5,000 kg, lifting height: 6,050 mm, free lift: 2,160 mm, fuel type: electric, mast type: triplex, construction height: 3,280 mm, fork carriage width: 3,800 mm, fork length: 1,800 mm, empty load weight: 11,758 kg, total length: 3,640 mm, drive type: Elektro, construction width: 2,900 mm, Four-way side loader Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Battery voltage: 80V Battery capacity: 775Ah Battery year: 2025 Description: In addition to this Hubtex model, we currently have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our Hamburg and Gdansk locations. Visit our website – sago-online. Lease-purchase and financing under attractive terms are always possible. We are also happy to purchase your used equipment outright, even if you don’t purchase a machine from us. Our owner, Mr. Peter Sawitzki, will be pleased to give you in-depth advice regarding this MQ50. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tons. We can also display your vehicle with us on a commission sale basis. Fork positioner Fork positioner opening range: 500 / 3,800 mm Full free lift Nljdpfxoz Ewbdo Af Ssg Platform height: 580 mm

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Nodpfxotu U Ebo Af Sslg

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 7,406 h, load capacity: 5,000 kg, lifting height: 6,260 mm, free lift: 2,200 mm, fuel type: electric, mast type: triplex, construction height: 3,380 mm, fork carriage width: 3,820 mm, fork length: 1,800 mm, empty load weight: 12,858 kg, total length: 3,660 mm, drive type: Elektro, construction width: 3,000 mm, Four-way sideloader Load center: 700 Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Battery voltage: 80V Battery capacity: 775Ah Battery year: 2010 Description: In addition to this Hubtex model, we have around 200 heavy-duty forklifts, compact forklifts, pallet trucks & sideloaders in stock at our Hamburg and Gdansk locations. Visit our website - sago-online. Leasing and financing on attractive terms are always possible with us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail about this MQ50. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom construction for forklifts from 8 tons and up. We can also offer your vehicle for sale on commission at our facilities. Fork positioner, Fork positioner opening range: 600 / 3820 mm Nsdpfx Aexq Hvdjf Solg Full free lift, Platform height: 492 mm;

Condition: reconditioned (used), K.H.D. Calibrator 1300H . Without frame . With hydraulic-unit, electric motor and Voith Turbo coupling . With new cone and shell . Nljdpfxevt Su Io Af Ssg Overhauled, sandblasted and painted .

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel Nlodpfx Aou R Syijf Ssg This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: used, Year of construction: 2005, cutting diameter 1060 mm saw band length 11.430 x 80 x 1,6 mm cutting width 1,6 mm cutting range 1060x1260 mm Control CNC cutting speed 12-90 m/min power capacity 11 kW table load 20 t Cutting Length max. 6100 mm total power requirement 20 kW weight of the machine ca. 21,1 t Automatic feed length 2,100 - 6,100 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Nedpfx Afoyqr Uto Sslg please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Nlsdpfsf Dwa Uex Af Ssg +++++

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Njdpfx Afeuiy Ngj Sslg Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Nodsqmi Irjpfx Af Sjlg Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: excellent (used), Year of construction: 1985, still very nice veneer saw with planing head cutting length 3050 mm with rear support and fence Nljdpfsn An A Tox Af Ssg