Used Start Hole Drilling Machine for sale (71,021)

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Kljdpfxjxc Hi Uo Ah Nol Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Drill pitch: 32mm Power consumption: 2.2kW Drilling unit: swiveling

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Cup hinge drilling head: yes Kodpswv Nb Njfx Ah Nsll Drill pitch: 32 mm Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: swivelling

Condition: good (used), Year of construction: 1997, High-speed EDM drilling machine, KOTON Type: EDM-KTH-202A.. In good condition with cooling and filter unit. Machine documentation available. See data sheet for specifications. Kedpfx Ahowmn Szo Noll

Condition: used, Year of construction: 2017, Number of drilling spindles: 21 pcsPitch: 32 mmDrill chuck: Clamping surface of drill shank: 10 mmOperation: foot pedalTools included: yesDrilling direction: from below & end faceTilting: manualTilting angle: only 0° or 90°Max. pass-through height: 80 mmMax. pass-through width: 750 mmNumber of material clamps: 3 pcsType of material clamping: pneumaticDesign: stationaryStop system: only for structural seriesWeight approx.: 400 kgMotor power: 1.5 kWDust extraction diameter: 120 mmStorage location: with customer Ksdsihghrepfx Ah Nsll

Condition: used, Year of construction: 2022, New demonstration machine! List price: €13,610.- 400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration with: Fully automatic electronic control with impulse operation via foot pedal for clamping-drilling-unclamping, automatic electrical return of the drilling unit once the set drilling depth has been reached, automatic adjustment for increased drill depth when end-faced drilling saves need to reset the depth for surface to edge drilling operations (+10 mm; e.g., for dowel length 35 mm, surface depth 14 mm and edge depth 24 mm). 1 drilling beam with 21 spindles, 32 mm center distance, 1.5 kW motor (drill feed 0-70 mm). Incl. 21 quick-change chucks (Ganner system) for easy bit exchange; multi-position swivel drilling unit from 0° to 90°, supported by gas spring. 1 clamp carrier, movable along the Y-axis with 3 pneumatic clamps, for workpiece height up to max. 80 mm. Comprehensive stop system includes: 1 1800 mm stop rail for shelf drilling (aluminum profile 40x40 mm) with 3 locator stops, quick-change system, easily switchable from right to left side for mirrored shelf drilling in cabinet construction; also usable for line boring in System 32. Limit stops and position settings as well as drilling height position over the support table with mechanical digital stop. Stops can be easily swung away for the quickest changeover from cabinet to frame and arm extensions for clamp carrier executed for line boring positions up to max. 300 mm. Ideal three-stage tool system. 1 set of dowel drills: 5 carbide dowel drills, Ø 8x77 mm, right; 4 carbide dowel drills, Ø 8x77 mm, left. Additional features: Extraction funnel, dust-tested, Ø 120 mm. Set for line boring in System 32 complete with: 2 guides with scale and adapter for position max. 300 mm, 2 pairs of locator cams for line boring for Y-position 37 mm and e.g. 300 mm, 1 base rail 1000 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 set of drills: 11 carbide line boring drills, Ø 5x57 mm, right; 10 carbide line boring drills, Ø 5x57 mm, left. Hydraulic brake cylinder. Clamping cylinder with holder, additional. Location: Kedeqw Ek Ispfx Ah Nsll

Condition: used, Year of construction: 2016, machine/vehicle number: M99955/3533513, Pipe Cutting Machine FZH VARIO 2 with 2.9m Magazine (Year 2016) Automatic pipe cutting line VARIO 2 by FZH Maschinenbau GmbH, manufactured in 2016. This line is designed for the cutting to length of round pipes and has been used in serial production of furniture fittings. The system comprises a magazine with singling system, feed unit, pipe cutting head, as well as extraction and deburring unit. Application areas: – Automatic cutting of round pipes in series production – Pipe diameter approx. Ø 6.0–78.0 mm – Wall thickness approx. 0.1–1.5 mm (plastics up to approx. 2.0 mm) – Cut lengths from approx. 70 mm, with typical lengths from 200–1,200 mm – Suitable for steel pipes (e.g., E195) and various other pipe materials Kedox Hqd Topfx Ah Nsll Machine basic data (extract from manufacturer documentation): – Pipe diameter (outside): Ø 6.0 mm to 78.0 mm – Wall thickness: 0.1–1.5 mm (plastics up to 2.0 mm) – Cut lengths: 70–700 mm in one feed cycle, longer lengths by repositioning – Minimum cut length: 70 mm – Shortest scrap length: 150 mm – Pipe input: by the meter or from coil – Cycle time for cutting only: approx. 4 s (material dependent) – Feed time for 200 mm pipe length: approx. 2 s – Feed time for 500 mm pipe length: approx. 5 s – Feed time for 1,200 mm pipe length: approx. 16 s Condition / maintenance: – Well-maintained used condition from family business – System was regularly serviced – Technical documents (offer, layout drawing, specifications) available – Photos of the complete line including magazine and deburring unit available Inspection possible by appointment. Dismantling and loading can be organized in coordination with the buyer.

Condition: excellent (used), This machine was overhauled in 2025 and is therefore in like-new condition! Technical data: - Min. drilling diameter 16 mm - Max. drilling diameter 35 mm - counter boring 65 mm - Max. drilling depth 1,400 mm using BTA method - Required machine footprint approx. 6,100 x 3,100 mm - Max. machine height 2,400 mm - 2 separate drilling units, mounted on base machine bed, spindle distance 600 mm - Flat guideways - Feed drive via ball screw and feed gearbox - Rapid traverse speed 4,000 mm/min - Feed speed max. 230 mm/min - Drive power per drilling spindle: 11 kW (2 pieces) - Infinitely variable speed up to max. 6,000 rpm - Hydraulically attachable tailstock with counter run - Tailstock manually movable on base plate with T-slots - Enclosure with sliding doors - 1 steady rest each - 1 rotating clamping bell holder, basic holder each - 2 pre-centering devices each - Drilling depth control via cams and limit switches - CNC control SFT and FU, connection 380 V / Rated current 80 Amp. Kjdpfowq I Iqex Ah Njll - Each unit has its own control and own feed motor With this machine you actually receive 2 single-spindle machines, as each spindle is operated separately with its own control and feed motor.

Condition: refurbished (used), 2-spindle deep hole drilling machine under reconstruction Kjdjx E U S Ejpfx Ah Njll

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: M02-4-320, Deep hole drilling machine For technical data, please refer to the attached images Kodpfx Ajx Ezllsh Njll

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Kjdpex Ehg Tjfx Ah Nell

Condition: excellent (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) Kodpoxyf E Nsfx Ah Nsll • Chip conveyor

Condition: reconditioned (used), -Drilling diameter 5~25 mm -Drilling depth 1500 mm -Tailstock -Tank -pump Kedpohuil Refx Ah Nell -Filter

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter 5-30 mm Klsdpfsxzz Hox Ah Nol - Drilling depth 750 mm - Filter - Pump

Condition: ready for operation (used), Drilling diameter 5 ~ 25 mm Drilling depth 1000 mm Kljdpfx Ahodgpltj Nol Headstock Tank pump Filter

Condition: good (used), Year of construction: 1979, TBT T30-4-750/1000 -drilling diameter ~30 -drilling depth 750/extension ~1000 Kljdpfxed Ri H Ee Ah Nel -Tank -Pumps -loading equipment -Tailstock

Condition: good (used), -Drill through fair 5-30 mm - depth 750 ~ 900 mm - conversion to customer specification Kodj Dcz Djpfx Ah Nell

Condition: good (used), Year of construction: 2011, machine/vehicle number: 35114, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, feed length Z-axis: 600 mm, total length: 3,500 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 2,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,000 mm, table width: 680 mm, feed length W-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 124, DRILLING CAPACITY: - Twist drill diameter: max. 16 mm - Single-lip drill: 4–16 mm Klodpfxewxq E Ue Ah Nel - Thread cutting: max. M12

Year of construction: 1983, condition: used, machine/vehicle number: 508323, 21-spindle, pitch 32 mm tool holder M 10 external thread Kjdsdardxepfx Ah Noll spindle distance max. 640 mm Gantry passage max. 1056 mm, stop length 2500 mm with 4 swiveling stops drilling unit with motor 2,2 kW drilling head swiveling, drilling from below height adjustment max. 80 mm drilling depth max. 80 mm, ex location Seevetal, as viewed, subject to prior sale

Condition: excellent (used), Year of construction: 2012, operating hours: 79,000 h, functionality: fully functional, machine/vehicle number: 106648-11, Please provide your offer price. Sales only within Europe, including Turkey. Price excluding packaging; delivery condition: FCA (machine location). Available machines: 5 units, identical process. Kledpjxzgrasfx Ah Njl Year of manufacture: 2001 - 2012 ===== For technical data, please refer to the handout. All warranty rights are excluded. We do not guarantee the accuracy of the technical data and year of manufacture, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sale to private individuals.

Condition: used, machine/vehicle number: MR006800, Used oscillating drilling machine, manufacturer PADE Kjdpfxjxxym Es Ah Njll Technical specifications: - Drill head speed: 9000 rpm - Drill chuck capacity: 13 mm - Drilling depth: 80 mm - Drill head adjustment (height): 100 mm - Weight: 450 kg

Year of construction: 1986, condition: used, - working length (mm): 3200 - drilling units: 3 from below with 3-spindle drilling head Klodpfxs Drmxs Ah Njl - Hold down: 2 from above - pressure cylinder: 1 from the side - control: Siemens of newer construction

Condition: excellent (used), Year of construction: 2008, The deep hole drilling machine is in very good condition! Deep hole drilling machine type TBM 120-2000 Drilling system BTA Min. drilling diameter D 35 mm Max. solid drilling D 130 mm Max. counterboring D 170 mm Main spindle block with two-stage gearbox -Drive Ax AC motor 37 kW with brake for spindle locking 1200-1500 rpm -Drill spindle block with two-stage gearbox 50-500 rpm, 450-1200 rpm, electrically switchable. Optional rotating / stationary tool. Main spindle box (tailstock) with two-stage gear electr. switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydraulic jaw chuck. Ksdpfxjq A S Eks Ah Nell Main and drill spindle speed continuously adjustable Machine bed as welded construction Guideways in linear roller design size 65 -Drill carriage movement via ball screw, gear and servo motor 3 kW Rapid traverse max. 3000 mm/min Maximum feed rate: 1000 mm/in. Hydraulically attachable drill bushing holder 2 x attachable steady rests 2 x roller pre-centering devices D20-100 mm 2 x Boza drilling range D 8-200 mm with chip chute and suction pump Scraper conveyor -1-axis CNC control PS 100 SFT for controlling and monitoring the drilling cycle Torque monitoring of the drilling spindle and feed rate in % painting: blue/gray, RAL 5015/7035

Year of construction: 2018, condition: as good as new (ex-display), Number of spindles 1 Kedpsd S Ualofx Ah Njll full drilling 5-40 mm Drilling depth 1.000 mm

Condition: good (used), Year of construction: 2004, TBT ML 200-2-800 deep hole drilling machine TECHNICAL DATA Kedpfx Ahjvcbg Ss Noll Type: ML 200-2-800 Year of construction: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drilling slide stroke: 800 mm Drilling range: 1 - 10 mm Process: Single-lip drill Drilling depth: Immersion spindle: 110 mm Seal housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 Voltage: 240 / 350 / 350 V Frequency: 100 - 800 Hz Weight: Approx. 2.6 T We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Ksdpfx Ahevca Rcj Nell Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided