Used Start Hole Drilling Machine for sale (69,769)

Condition: excellent (used), Heidenhain TNC 124 control system X/Y/Z travel 450/260/120 mm W travel 450 mm Clamping area (L x W) 770 x 320 mm Permissible table load 100 kg Distance table to spindle nose (min. – max.) 0 – 110 – 560 mm Feed rate X/Y 1 – 2000 mm/min Tool quick-change system SF 32 Speed range continuously variable 100 – 9200 rpm Drive power 5 kW Space requirement (W x D x H) 1500 x 1480 x 2330 mm Rjdpfx Adjwk Edpjaon

Condition: used, Accessories available. Fehlmann cross table KS 240 Drilling quill digitalized table size 530 - 240 mm X - path 280 mm Y - path 180 mm Redpfx Aoci Auvjdajn Speed electronic, stepless with potentiometer 132 - 4500 rpm

Condition: used, -Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Rodpfjcyaq Eox Adaen Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

Condition: used, -Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Rodsc Ndntopfx Adasn Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

Condition: new, - Speedometer Digital - Depth indicator Digital Maximum drilling capacity 30/35 mm Max threaded drilling capacity M12/M20 Spindle stroke 130 mm Spindle cone Morse 4 Max distance between spindle and table 790 mm Distance between spindle axis and column 308 mm Spindle stick Vertical stroke of the spindle stick 130 mm Spindle speed 1-160-1000 rpm. 2-320-2000 rpm. Rjdpfx Aed Slyfsdajn Dimensions of the plate 350 x 440 mm Dimensions of the upper plate 570 mm Engine power 2.7/1.7 kW Weight 305 kg Dimensions 400x900x1900 mm

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 40 / 23 mm throat 320 mm bore stroke 180 mm 4 speeds 30 - 765 U/min table-size 720 x 550 mm weight 480 kg dimensions 750 x 900 x 1900 mm Equipment: - Multi-spindle head, drill Ø 23 mm Rsdpjyfwzusfx Adaon - automatic feed - coolant device - infinitely variable speed - adjustable drilling depth stop

Condition: used, bore capacity in steel (diameter) 23 mm throat 220 mm bore stroke 120 mm Number of revolutions 25 - 3.200 U/min distance Spindlenose and center of table 275 mm table surface area 300 x 355 mm T-slots 3x T - slots distance 120 mm column diameter 110 mm weight of the machine ca. ca. 120 kg dimensions of the machine ca. 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet Rodpsyfwunjfx Adaon

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Especially designed for stair construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Redpfxsxmatns Adaon Angled dowelling and spindle drillings, such as for balusters, can be easily accomplished with the swiveling drilling unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Equipped with Röhm two-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can swivel 65 degrees left and right Pneumatic adjustment of working height allows dowelling on two levels without repositioning. Desired drilling heights can be set for each drilling level via digital counter, switching between levels is pneumatic and operated from the front Cross adjustment 340 mm, infinitely variable or in 12 mm increments via indexing rail Pneumatic clamping possible at any point, operated from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round rod Assorted drill bits Operating manual CE mark Machine was partly repainted due to paint splashes. Pneumatic hoses replaced Dimensions: approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be viewed and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: used, Year of construction: 2007, total width: 1,400 mm, total length: 1,200 mm, total height: 1,700 mm, Empty weight: 250 kg - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 1698 - Main motor power [kW]: 1.1 - Table length [mm]: 600 - Table width [mm]: 1150 - Number of spindles [pcs]: 18 - Workpiece clamps [pcs]: 4 - Workpiece support/Guide: Traverses - Transport dimensions: 1200mm x 1400mm x 1700mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Rsdpfsyfnazsx Adasn Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, The KNUTH KSR 50 VT is a high-performance radial drilling machine that belongs to the Radial Drilling Machines category. Designed with "Tool to the workpiece" in mind, this machine offers exceptional flexibility with clamping surfaces on three sides to accommodate various applications. Built from thick-walled high-grade cast iron, the KSR 50 VT features a robust structure, ensuring durability and precision during operation. The electronically controlled servo quill feed and large touchscreen display enhance user experience, allowing for seamless adjustments of machining parameters. Ideal for single and small series production, it shines in maintenance activities and tool as well as steel construction. With a drilling capacity of 50 mm and a table setup area of 1,200 x 505 mm, the KSR 50 VT is versatile enough for diverse tasks. Buy now to elevate your drilling capabilities with this advanced radial drilling machine. Rjdpfoyfl Uvsx Adasn

Condition: good (used), Year of construction: 1992, Hydr.hole punching machine make häwa year 1992 working pressure.400bar with electric height adjustable supporting table Redpfx Adegbk R Ujaen Machine ready for use .

Condition: good (used), Year of construction: 2000, Drilling unit SUHER Power master, year of manufacture 2000. Rsdpfx Aexr Dlxsdajn

Condition: good (used), Year of construction: 2000, Drilling unit SUHNER Mono master Type: BEM12 ST25 1040, year 2000, equipped with Siemens motor. Rodpfoxr Dk Usx Adasn

Condition: ready for operation (used), Year of construction: 1975, Column drilling machine Make CORDIA Type: S-18 Year.ca.1975 Rodehtri Ejpfx Adajn drilling in steel max.18mm spindle mounting : MK2 spindle speed : 90 -1450 rpm spindle stroke : 120 mm table:350 mm X 400 mm clamping surface;270 mm X 320 mm Space requirement : width 420mm depth 650mm height:2000 mm Weight:ca.350 Kg. Machine is ready for use .

Condition: good (used), Year of construction: 1990, table length: 1,200 mm, table width: 400 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Rsdpfx Aeyfd Nfodajn Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Gillardon pillar drilling machine, type GB 30 V, speed 60 - 1800 rpm, automatic feed, very good condition, tool holder MK 3. Redpfx Aoxpxbcsdajn

Condition: like new (used), Technical Specifications Drilling capacity in steel (diameter): 32 mm Redpfevzgm Iex Adaen Throat depth: 320 mm Drilling stroke: 170 mm Spindle mounting MK: 3 Speed range: Table size: 570 x 480 mm Total power requirement: 1.6 kW Weight: 650 kg Dimensions: 1200 x 800 x 2200 mm

Condition: excellent (used), Catalogue number: 7859 ADVANTAGES – 8 spindles – with oscillation – variable spindle spacing (adjustable) – 2 work tables – unpainted – used drilling machine, in very good condition TECHNICAL DATA Drilling spindles: 2x4 pcs Oscillation range left/right: 40mm per side Oscillation speed adjustment on inverter Spindle head adjustment: up/down Each pair of spindles (2 pcs) adjustable: left/right 2 rotation speed options + left/right Max tool diameter: 15mm Rsdpfx Aox I D Nljdaon Table adjustment: up/down Table dimensions: 700x200mm 4 hydraulic cylinders Motor power: 2x 2kW Oscillation motor: 0.75kW Dimensions (L/W/H): 1800x1350x1300mm Weight: 862kg Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Rsdpfx Aoxlqxfedaen Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: new, Year of construction: 2024, neu 2024 3983 prompt, Zwischenverkauf v Spanien 7260 € 140.12 € 1 1 32 mm MK 3 250 mm 65 - 125 - 185 - 365 - 54 U/min 1,8 / 2,6 kW M24 600 mm 640 mm 2020 mm 260 kg 100 mm 85 - 635 mm 1.170 mm 300 x 270 mm 600 x 380 mm 120 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine manual feed left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN (sample photo) OPTIONS: lighting equipment € 260,-- coolant equipment and machine base with T-slots Rjdjwirzropfx Adaon € 910,-- reverse for tapping € 810,-- DELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS.

Condition: used, Year of construction: 1972, bore capacity in steel (diameter) 50,0 mm arm length 1.350 mm workpiece height max. 1630 mm turning speeds 19 - 1320 U/min bore spindles - Morse Taper 5 MK engine output 5,5 kW weight 5 t range L-W-H 2,4 x 1,0 x 3,55 mm feed movement 475 mm Rodpfswiikdox Adajn floor plate size: 1650x1000 mm feeds 0,07-2,9 mm/U

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 332046, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,200 mm, spindle speed (max.): 850 rpm, spindle speed (min.): 6 rpm, feed rate X-axis: 8 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 1 m/min, total width: 10,000 mm, total length: 14,000 mm, total height: 4,500 mm, spindle diameter: 160 mm, table load: 40,000 kg, table length: 3,000 mm, table width: 3,000 mm, workpiece weight (max.): 40,000 kg, overall weight: 71,000 kg, drill spindle length: 1,200 mm, year of last overhaul: 2002, power: 60 kW (81.58 HP), The machine is dismantled on stock, it is fully functionable. Rodeuplptjpfx Adajn

Condition: excellent (used), Year of construction: 2000, Very nice metal milling machine with digital readout. Year of manufacture estimated, as no nameplate can be found. X-axis: approx. 320 mm Y-axis: approx. 110 mm Z-axis: approx. 150 mm Rjdpfjxv D Unox Adaen

Condition: excellent (used), Machine type: Drilling and milling machine Year of manufacture: 2014 Drilling capacity in steel: approx. Ø 50 mm Thread cutting capacity: M26 Spindle speed: 32 - 2340 rpm Tool holder: MK ISO 40 (DIN2080) Quill stroke: 145 mm X-axis travel: 585 mm Y-axis travel: 240 mm Table clamping surface: 800 x 250 mm Table swivel range: +/-45° Table rotation range: +/-45° Weight: approx. 800 kg Dimensions (W x D x H): approx. 1500 x 1380 x 2250 mm Condition: very good Rjdpfx Aoyc Hgusdasn Accessories: Various, according to drawers, see pictures

Condition: reconditioned (used), functionality: fully functional, AYEN electro-pneumatic feed shaft drilling unit, Type RPM-S4, 3.0 kW, 2850 rpm, stroke 85 mm, 4 units in stock. Rsdpfxjqv Ey Uo Adajn