Used Stainless for sale (6,237)

Condition: used, Used Breddo model LORWW 100 US gallon (378 litre) capacity stainless steel vertical jacketed mixing vessel/Likwifier. Has approximately 1200mm diameter X 470mm deep tank with welded cone bottom and flat open top with hinged lids. Has approximately 250mm diameter bottom entry general purpose impeller belt driven by 30 hp 415 volt 3/50 1500 rpm motor with Allen-Bradley Powerflex 70 inverter drive. Also includes baffle bar. External jacket rated 125 psi (8.6 bar) working pressure at -20/+400 degf (-29/204 degc). Mounted on stainless steel mobile base with diaphragm pump local controls. Specifications: Capacity: 100 gal Diameter: 3.94' Kdjdpfx Afjxpurdoieu Height: 1.54' Vertical/Horizontal: Vertical Type of stainless: Stainless Steel Legs/Lugs: Mounted on stainless steel mobile base

Condition: excellent (used), Suitable for filling a massive variety of products, for example; fertilizer pellets, toner powder, cat litter, granulated or powdered pet food, whole and ground coffee, sugar, plant food, powdered foods, plastic granules, ground spices, flaked spices, fine cut tobacco, whole and ground pepper, detergent powder, flour, infant formula, cake mix, matcha powder, cosmetic powder, curry powder, seeds, salt products, rice products, lentils, breadcrumbs etc. Kdjdpfxow H Adre Afiou

Condition: like new (used), The washing machine features two cycles: main wash and rinse. This washer is equipped with one laundry compartment utilizing a circulation pump spray system and a rinse section. Containers requiring cleaning are processed via a chain conveyor that feeds them through the compartment. During the main wash cycle, wash water is drawn from the pumping tank by a centrifugal pump and delivered through a piping and spray system over the container, ensuring thorough internal cleaning. Disinfection can also be achieved either by heating the water above 82°C or by dosing disinfectant into the rinse water. The wash water is heated via a central heating system (95/80ºC, supplied externally) and tightly controlled to within 0.1ºC by a digital temperature controller. The intensity depends on contamination levels. Excess fats and proteins are removed by means of the pump using the overflow principle. TECHNICAL SPECIFICATIONS: The following specifications pertain to the container/pallet washer: Dimensions: 2900 x 2300 x 3100 mm Weight: 1500 kg Infeed height: 1000 mm Bath capacity: approx. 950 liters Conveyor: double-chain conveyor Spray nozzle drive: 0.25 kW, 33 rpm Pump motor: 15 kW Pump capacity: approx. 1000 l/min at 6.2 bar Electrical connection: 230/400 V, 3-phase, 50 Hz Pump material: Stainless steel 304 Heating: Central heating 95°-80°, 65 kW Main wash temperature: 50° - 55°C Compressed air: 6 bar, filtered to 50 μm min. Operational Limits: - Maximum container/pallet dimensions: 1200 x 1000 x 790 mm - Throughput: ± 20 containers/pallets per hour (Output varies depending on container size) Includes 2 conveyor belts: - 2700 mm x 1500 mm x 850 mm (LxWxH) - 2750 mm x 1350 mm x 850 mm (LxWxH) Speed: 14 m/min Kjdpfx Asxp Rqcsfiodu Connection: 400 V / 3-phase / 50 Hz Drive power: 0.55 kW

Condition: good (used), Stainless Steel Blancher Blancher Type: Screw blancher Ksdpfx Aexp Rm Djfiodu Screw diameter: Ø 430 mm Tier height: 400 mm Drum diameter: Ø 1700 mm Overall dimensions: 9000 × 2600 × 2800 mm Material: Stainless steel Industrial screw blancher made entirely of stainless steel, designed for thermal processing (blanching) of vegetables, fruits, and other food products. The conveying screw ensures uniform movement of the product and consistent temperature application throughout the chamber. The robust stainless steel construction guarantees durability, ease of cleaning, and suitability for use in automated production lines in the food industry.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 260 kg, total length: 1,140 mm, total width: 450 mm, total height: 525 mm, volume flow: 6 m³/h, final pressure: 2.4 bar, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,440 rpm, protection type (IP code): IP56, 2 units of horizontal, radially split volute casing process pumps with single entry, single stage radial impeller Manufacturer: KSB Model: CPKN-C3.1 040-250 Kjdpfx Aoxp Eqkefiodu Year of manufacture: 2009 Shaft sealing: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: Pump speed: 1,440 rpm Flow rate: 6.0 m³/h Head: 24.0 meters Shaft power: kW Efficiency: % NPSH: Materials: Casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 4.0 kW Energy efficiency: IE 1 Voltage: 400/690 V Speed: 1,440 rpm The material 1.4593 Noridur is highly suitable for: - Chemical and process industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coking plants - Textile and pulp industries - Food and sugar industries - Mining / coal extraction and conveying - Flue gas desulphurization (FGD) plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment / sewage plants - Offshore and marine engineering

Condition: used, mileage: 340,000 km, power: 184 kW (250.17 HP), first registration: 12/2013, overall weight: 14,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2013, Equipment: ABS, air conditioning, parking heater, Manufacturer MAN Model TGM 14.250 4x2 VM-Tarm 4.000 l. Rustfri stål PED Kombi Year 2013 Condition Very good Serial Number WMAN26ZZ8EY305228 Ref. nr. 558002 Reg. date: Last seen: 21-02-2025 Hk: 250 Km: 340000 Gearbox: Automatic Eurotype: 6 Diesel tank: 1 Kdjdpfexpzxkox Afiou Tank liter: 300 Rear view camera: ? Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 285/70R19.5 Cover% left 20 - 60% Front suspension: Air Suspension rear: Air Toolbox: ? Hydraulic system: ? Total weight: 14000 kg. Net weight: 9140 kg. Load capacity 4860 kg. Manufacturer: VM-Tarm Tank capacity: 4000 liters of sludge + 1600 l. Water High pressure pump: Uraca P3-10 High pressure capacity: 160 bar 127 l/min High pressure pump hours: 1134 Vacuum pump: Jurop PNR142HDR Vacuum capacity: 14.200 l/min Vacuum pump timer: 1905 Remote control: ? Water heater: ?

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Specifications: Capacity: 4,000 L Kdsdpjxpuq Tjfx Afisu Diameter: 1,800 mm Straight Side: 2,450 mm Material of construction: Stainless Steel Type Of Heads: Welded Dished Top and Bottom Internal Pressure: 6 bar Jacket Pressure: 9 bar Internal Temperature: 130°C Type of stainless: Stainless Steel Legs/Lugs: 4 Lugs

Condition: like new (used), Thanks to the high cutting speed and the highly technical design of the blade cover, the LASKA cutting machine guarantees the best minced meat with the shortest batch times. LASKA cutter features: - High cutting speed providing short batch processing times. - 360° cutting action ensuring a fine emulsion. - Improved accuracy. - Newly designed filter system protects against dust, moisture, and steam ingress. - Vibration-free blade shaft and bowl rotation for extended machine longevity. - Integrated AC drive technology delivers higher efficiency and lower energy costs. Kjdpfxexp Rp Se Afiedu - Clear operating concept for optimal and transparent operation.

Condition: used, Comprehensively tested and refurbished, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 750 litre Mixing trough: 1000mm wide x 1500mm long Discharge Type: pneumatically operated twin bomb door discharge Type Of Blades: Twin shaft paddles Motor: 15 kw 415 volt 3/50 motor Also includes: Mild steel frame Ksdjxpuq Hspfx Afijdu A video of this mixer is available below.

Condition: used, Machine that enables cooling of any format. The cooler is divided into the following groups: 1- Can inlet. 2- Cooling corridor - ZONE 1 - ZONE 2 - ZONE 3 3- Jar outlet. 4- Drying. Includes: - Infeed and outfeed belts with variable speed motor. - 3 centrifugal pumps - Chemical dosing pumps. Output may vary depending on the format. Kdedjxp N Umspfx Afieu

Condition: used, Comprehensively tested, used Winkworth reportedly model GU660 stainless steel ribbon blender. Manufacturer: Winkworth Material: Stainless steel Capacity: 660 litre (product dependent) Mixing trough: 1,750mm long x 700mm wide x 790mm deep Discharge Type: air operated discharge value Type Of Blades: single interupted ribbon Motor: 7.5kw, 1450rpm, 415volt, 3/50 motor through Opperman type HTM7 gearbox rated 38.2/1 reduction rated, 37rpm output. Also includes: Hinged lid with clamps. -Control panel with castell key interlock. -Mild steel mobile base. A video of this mixer is available below. Specifications: Capacity: 23.3 ft³ Material of construction: Stainless steel Width: 27.56" Horsepower: 10 hp Length: 68.9" Dimensions: 68.90in x 27.56in x 31.10in Kdsdexpuqyspfx Afieu

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless steel Kjdpfx Aoxpuqmsfisdu Year of Manufacture: 2016 Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. A video of this mixer is available below. Specifications: Bowl Volume: 105.7 gal Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: used, Used Oliver & Batlle model HM-15 stainless steel bead mill. Has stainless steel jacketed chamber which measures approximately 450mm long x 250mm diameter. Approximate total capacity 15 litre (product dependent). Kdsdpfxoxpuqgo Afiju This equipment has a stainless steel rotor belt driven by 18.5kw, 415volt, 3/50, 1460rpm motor. Click on the link below to see a video of the machine running.

Condition: used, Unused from new Caldereria Teruel (Spain) approximately 1,000 litre 316L stainless steel IBC. Internal measures approximately 1110mm diameter X 1230mm straight side. Mounted on stainless steel forkliftable base. Hinged manway lid on top dish with fast release clamp. 40mm side bottom discharge with valve. Includes 12 months warranty. In stock and immediately available. Specifications: Material Grade: 316L Stainless Steel Dimensions: 1110mm diameter X 1230mm straight side Kdsdpfsxpup Njx Afieu

Condition: used, Used Gericke type N450x800 MK2 nibbler. Unit has mild steel body with stainless steel 4-blade rotor, screen frame & screen. Unit direct driven with motor/gearbox. Has approximate throughput capacity of 30,000 l/h (product dependent). Kdsdpsxpup Asfx Afieu Equipped With: Per RD 13/06/25 on hold for CcM Technologies, UK.

Condition: used, Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm straight side. Chamber is lagged and clad. Has electric heater, cyclone and pipework. Unit is mounted on mobile frame. Includes stainless steel Niro centrifugal air operated atomiser. Kdedpfxoxpupvo Afiju Click on the link below to see a video of the machine running.

Condition: used, Used Alfa Laval model BTPX 205SGD-34CDP-50 stainless steel clarifier centrifuge. Skid mounted system with steam sterilization provision. Direct driven by 6.5 kW 415V 3/50 2900 rpm motor. Maximum bowl speed 9650 rpm. Includes some tools. Kodpfoxpuppjx Afiodu

Condition: used, Used NAUTAMIX Stainless Steel Mixer Ksdpfx Asxput Iofijdu No. 20095 Similar to the Type MBX10 Useful capacity : 1000 litre Gear motor : 0.37 kw – Hp 0.5 – Rpm 58 – 3x 220/380 volts Motor : 3 kw – Hp 4 – Rpm 1500 – 3x 380 volts

Condition: used, Used COMEC stainless steel Vacuum mixer Total capacity : 6 litre Useful capacity : 4.5 litre Kdjdpfx Afjxputnsiju Stainless steel bowl Ø 200 x 190 mm Double jacket Agitator : paddle – turbine – scraper – variable speed LEYBOLD Type SV 16 vacuum pump Dimensions: Ø 200 x 190 mm

Condition: used, Used SPX Flow Technology APV model R15-18.56 stainless steel homogenizer. Has three piece valve housing. Maximum capacity 400 l/h with maximum pressure 800 bar. Mounted on stainless steel mobile skid. Unit includes process control skid. Kedexnl N Ropfx Afiodu

Condition: used, Used Caleva Model 380A stainless steel spheronizer. Unit has a 380mm diameter bowl. 250g to 5kg batch size with an approximate output of 50kg per hour. Unit is driven by a 1.5kw, 415 volt, 3 phase, 50 hz motor. Mounted in stainless steel cabinet. Ksdoxnl R Uopfx Afijdu

Condition: used, Used Becomix model RW30CD stainless steel process vessel. Approximate 2-25 litre working capacity (product dependant). Unit has clamped dished top head and welded conical bottom head. Internal rated 29psi (2 bar) maximum allowable working pressure at 273 deg.f. (133 deg.c.) and 15psi (FV) maximum allowable external working pressure at 41 / 273 deg.f. (5 / 133 deg.c.) Minimum design metal temperature 41 deg.f. (5 deg.c.) at 29psi (2 bar). External stainless steel jacket rated 58 psi (4 bar) maximum allowable working pressure at 41 Deg.F. (5 deg.c.) to 306 deg.f. (152 deg.c.) Unit has top mounted agitator with electric drive/gearbox and bottom entry homogenizer with electric drive. Unit mounted in a stainless steel mobile frame. Kdjdpfxexnl I To Afiou Click on the link below to see a video of the machine running.

Condition: used, Comprehensively tested, used Kemutec 316 stainless steel ribbon blender. Manufacturer: Kemutec Material: 316 Stainless Steel Capacity: Approximately 50 Litre Capacity Mixing Trough: Approximately 540mm x 320mm x 400mm Discharge Type: Manual Plug Valve Type Of Mixer: Single Interrupted Ribbon Motor: 2.3 kW Also includes: Local controls, stainless steel hinged lid with clamps and perspex cover and stainless steel mobile frame. Click on the link below to see a video of the machine running. Kdedpfxsxnl Nqj Afieu Specifications: Capacity: 1.8 ft³ Material of construction: 316 Stainless Steel Horsepower: 3.1 hp Dimensions: 21.26 x 12.60 x 15.75

Condition: used, Used Netzsch approximately 1,000 litre stainless steel vertical jacketed mixing vessel. Unit has welded flat top and bottom heads. External jacket rated 3 bar working pressure. Unit has top entry stainless steel anchor type agitator with drive and stainless steel high shear agitator with drive. Unit is mounted on (4) legs with forklift attachment. Specifications: Capacity: 264.2 gal Type Of Heads: Flat top and bottom heads Vertical/Horizontal: Vertical Kdsdpfx Afoxnl Iyoieu Legs/Lugs: 4 legs with forklift attachment

Condition: used, Used Westfalia model HSA 200-06-777 stainless steel centrifuge. Intermittent solids discharge with basic design bowl clarifier design. Sanitary covers including sediment cover. Belt driven by 14/60 kW 400 volt 3/50 1465/2945 rpm vertical motor. Bowl 687mm diameter and driven at maximum 4800 rpm. Designed for liquid 1.1 SG and solids 1.3 SG. Last used on yeast clarification in a brewery. Working capacity up to 60000 LTR/hour depending on product. Kdodpfx Afsxm T Hzjiou