Used Stainless Curve for sale (6,889)

Condition: used, tank capacity: 11,424 l, GENERAL Equipment: Spray head, lifting lugs Design: upright Remarks: Double jacket with trickle ring – only suitable for non-pressurized temperature control; dents in the double jacket; double jacket cladding partially detached at the top head area (see photos) Speed: 55 / 112 rpm External diameter: 2,140 mm Internal diameter: 2,000 mm Total height: 4,500 mm Kjdjxqau Hepfx Affenf Heating/cooling: available Power: 1.5 / 2.2 kW Max. overpressure: 3.2 bar Agitator: Propeller Support type: height-adjustable feet Location: Bremen Technical documentation: Drawing Cylinder temperature control: double jacket Type plate: Vacuum: 1.0 bar Volume: 11,424 liters Cylinder wall thickness: 6 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,000 mm Last application: Dairy VESSEL Max. Permissible Operating Temperature: 145 °C Number of feet: 4 units HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / dome: on top head (Ø 450 mm) Note: slight residues, outlet pipe cut off Outlet: 48 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel AGITATOR 1 Voltage: 380 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Agitator arrangement: side-mounted on cylinder

Condition: used, Comprehensively tested, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 1,000 litres (approx) Mixing trough: 1700mm wide x 1500mm long x 1450mm deep Discharge Type: Pneumatically operated twin bomb door discharge Motor: Twin shaft paddles chain driven by 15 kw 415 volt 3/50 motor Also includes: Unit is mounted on mild steel frame Knsdpfx Afox Ifk Djfef A video of this mixer is available below. ?v=iV2YFSJEqPc

Condition: new, Year of construction: 2025, We produce all type of products that are made from stainless steel . Mixing Tanks Storage Tanks Pasteurizers Cheese Vats Heat Exchangers Knedpohciakefx Affjf Capacity range 50-2500 liters . Send an inquiry with a specification so we can make an offer .

Condition: used, Year of construction: 2007, tank capacity: 29,000 l, GENERAL INFORMATION Design: vertical Year of manufacture: 2007 Notes: Manhole diameter top head: approx. 700 mm; Manhole diameter shell: approx. 500 mm; Speed: 40 rpm External diameter: 3,200 mm Internal diameter: 2,980 mm Total height: 6,800 mm Heating/Cooling: available Power: 75 kW Max. pressure: 0.6 bar Agitator type: beam agitator Support type: legs Location: outdoor storage Technical documentation: drawing, CE marking and declaration of conformity Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Knjdpfx Aexqat Nsffof Volume: 29,000 liters Double jacket volume: 4,100.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 3,368 mm Last application: adhesive production VESSEL Max. permissible operating temperature: 100 °C Specific medium weight: 1.3 (to/m³) Number of legs: 4 pieces HEATING/COOLING JACKET Bottom heating/cooling: double jacket EQUIPMENT Manhole / dome: in the shell, in the top head Outlet: DN 125 mm AGITATOR 1 Agitator manufacturer: PRG Voltage: 400 Volt Bottom bearing: TECHNICAL DATA / MEASUREMENTS Bottom wall thickness: 9 mm Agitator positioning: central, in top head Top head wall thickness: 7 mm

Condition: used, Used Winkworth model PV3000 approximately 3,000 litre stainless steel process vessel. Unit measures approximately 1800mm diameter x 1800mm straight side. External jacketed rated 3.5 bar pressure at 200 deg.c. Unit has a welded flat top and welded conical bottom. Unit has a top entry stainless steel contra-rotating gate agitator with pitched blades driven by (2) geared motors: a 9.2kW geared motor operating at 14.8rpm and a 7.5kW geared motor operating at 27.2rpm. Unit has a bottom entry Silverson BE600 homogeniser with a square hole disintegrating head driven by a 22kW motor. Unit includes a bottom entry discharge pump. Unit is mounted on (3) legs. Knjdpex Ifiyjfx Affof

Condition: used, tank capacity: 5,600 l, GENERAL Equipment: Spray head, crane eyes Design: upright Remarks: 1 reducer on the outlet flange to a diameter of 65 mm; 1 dip pipe inside the tank; 1 pallet with accessories (footrests, fittings, etc.) is included in the scope of delivery; these accessories were not considered in the total height specified External diameter: 2,050 mm Internal diameter: 1,880 mm Total height: 3,000 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 150 °C Knodpfx Afoxqatisfef Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Agitator: agitator flange Support type: height-adjustable feet Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,600 liters Double jacket volume: 250.0 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,500 mm Last application: cosmetics TANK Max. permissible operating temperature: 150 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top head (DN 500) Outlet: 100 mm MATERIAL QUALITY Feet material: stainless steel AGITATOR 1 Agitator arrangement: side-mounted on cylinder

Condition: used, Used Hosokawa model 35-MSC-44 nauta conical double screw mixer. - Working volume: 3125 litre. - Working pressure: Atmospheric. - Product contact parts: Stainless steel 1.4301. - Cone has dimensions (approx.): 2334 mm diameter x 3366 mm cone height / 4609 mm total height (bottom edge of discharge valve - drive). - Top semi-circular covers: 1x hinged cover with safety mesh, 1x bolted cover with man way and flange DN400 Kodpfjx H Sg Nex Affenf - Non-supported screw agitators (double screw design): driven by 11 kW, 1500 rpm, 400 V electric motor, final rpms of screws 70 rpm - Arm: driven by 1.1 kW, 1500 rpm, 400 V electric motor, final rpms of arm 0.82 rpm - Lump breaker: driven by 5.5 rpm, 1500 rpm, 400 V - Includes: inspection doors at the bottom of cone (approx. 800 mm height x 500 mm wide at the top / 250 mm wide at the bottom), discharge valve. - Mounted: (3) lugs.

Condition: used, tank capacity: 8,300 l, GENERAL INFORMATION Equipment: Spray head, crane lugs Design: vertical Notes: Manhole diameter 510 mm Rotational speed: 489 rpm Outer diameter: 2,250 mm Inner diameter: 1,980 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 4,500 mm Heating/cooling: available Insulation: available Power: 2.5 kW Max. permissible operating temperature: 80°C Max. overpressure: 1.96 bar Agitator type: Propeller Support design: Height-adjustable feet Location: Bremen Cylinder temperature control: Double jacket Nameplate: Vacuum: 0.83 bar Volume: 8,300 liters Double jacket volume: 770.0 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,250 mm Previous use: Plant-based pharmaceuticals VESSEL Max. permissible operating temperature: 50°C Number of feet: 4 pcs HEATING/COOLING JACKET Base temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / dome: in the top head Note: light residues, manhole cover missing Outlet: 53 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 Volt Agitator mounting: eccentric in top head Agitator features: Agitator shaft slightly bent; motor slightly damaged Knodpfx Afexqatcefof

Condition: used, Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (Poland) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 2.2 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 20 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) stainless steel legs. Last time used in chemical production. Specifications: Capacity: 10,000 L Diameter: 2,600 mm Height: 2,100 mm Type Of Heads: Top flat, bottom elipsoidal Vertical/Horizontal: Vertical Type of stainless: AISI 304 Legs/Lugs: 3 legs Knsdpfox Hwdtex Affef

Condition: used, Year of construction: 2008, tank capacity: 3,535 l, GENERAL Equipment: Level indicator (without guarantee), spray head, crane lugs Design: vertical Year of manufacture: 2008 Remarks: The tank is unused, it was only filled with demineralized water for pressure testing Internal diameter: 1,400 mm Overall height: 3,553 mm Heating/Cooling: available Maximum overpressure: 6.0 bar Agitator: agitator flange Base type: height-adjustable feet Location: external storage Technical documentation: drawing, various documents Nameplate: Vacuum: 1.0 bar Volume: 3,535 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: unused Cylindrical height: 1,650 mm TANK Max. permitted operating temperature: 150 °C Ends: torispherical heads Number of feet: 4 pcs Knedexqaq Ujpfx Affsf EQUIPMENT Manway / Dome: in top head (DN 600) Outlet: DN32 DIN 11851 AGITATOR 1 Agitator positioning: bottom entry Agitator equipment: This refers to an agitator flange for a magnetic agitator.

Condition: used, Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (Poland) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. Last time used in chemical production. Specifications: Capacity: 12,500 L Diameter: 2,600 mm Height: 2,550 mm Type Of Heads: Top flat, bottom elipsoidal Knedpfxex Hwdgo Affof Vertical/Horizontal: Vertical Type of stainless: AISI 304 Legs/Lugs: 3 legs

Condition: used, Year of construction: 2008, tank capacity: 3,158 l, GENERAL Equipment: Level indicator (no guarantee), spray head, crane lugs Design: vertical Year of manufacture: 2008 Remarks: The tank is unused, it has only been filled with demineralized water for pressure testing External diameter: 1,580 mm Internal diameter: 1,400 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 10.0 bar Max. overpressure: 6.0 bar Agitator: magnetic stirrer Support type: height-adjustable feet Location: outdoor storage Technical documentation: drawing, various documents, operating manual Cylinder tempering: half-pipe coil Name plate: Vacuum: 1.0 bar Volume: 3,158 liters Double jacket volume: 90.0 liters Cylinder wall thickness: 5.6 mm Double jacket material: V4A 1.4404 (AISI316) Product-contacting material: V4A 1.4435 (AISI316) Condition: unused Cylindrical height: 1,680 mm TANK Max. permissible operating temperature: 150 °C Ends: dished heads Number of feet: 4 pcs Ksdpfoxqaqzox Affjnf HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar INSULATION Insulating shell: hermetically welded Insulation material: mineral wool Insulating shell material: stainless steel EQUIPMENT Manhole / dome: in the top head (DN 500) Discharge: available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7.5 mm AGITATOR 1 Agitator arrangement: bottom-mounted Top head wall thickness: 10.5 mm

Condition: used, Used Westfalia model HSA 200-06-777 stainless steel centrifuge. Intermittent solids discharge with basic design bowl clarifier design. Sanitary covers including sediment cover. Belt driven by 14/60 kW 400 volt 3/50 1465/2945 rpm vertical motor. Bowl 687mm diameter and driven at maximum 4800 rpm. Designed for liquid 1.1 SG and solids 1.3 SG. Last used on yeast clarification in a brewery. Working capacity up to 60000 LTR/hour depending on product. Ksdpfex Hv S Aex Affjnf

Condition: used, tank capacity: 600 l, GENERAL Equipment: Spray head, control cabinet (without guarantee) Design: vertical Overall width: 1,050 mm Overall height: 2,150 mm Overall length: 1,400 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 144 °C Knjdpfexqahaox Affef Max. permissible operating overpressure: 5.0 bar Max. overpressure: 3.0 bar Agitator: magnetic stirrer Support: mobile frame Location: external warehouse Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 600 liters Double jacket volume: 55.0 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: pharmaceuticals TANK Max. permissible operating temperature: 144 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar EQUIPMENT Manhole/dome: handhole Discharge: available AGITATOR 1 Agitator arrangement: bottom-mounted

Condition: used, tank capacity: 20 l, GENERAL Design: vertical Remarks: Handhole approx. 80 x 100 mm; support ring made of V2A stainless steel; vessel without bottom outlet; the permissible operating overpressure was presumably downgraded by the previous operator from 7 to 1 bar (see photo of nameplate) Internal diameter: 230 mm Total height: 650 mm Maximum overpressure: 1.0 bar Support type: support ring Location: Bremen Nameplate: Volume: 20 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 360 mm Last application: pharmaceuticals VESSEL Max. permissible operating temperature: 95 °C EQUIPMENT Manhole / inspection opening: handhole Outlet: not available Kedpfx Afoxqllqjfonf

Condition: used, tank capacity: 23,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical External diameter: 2,900 mm Internal diameter: 2,650 mm Total height: 5,200 mm Heating/Cooling: Available Insulation: Available Agitator: Propeller type Stand type: Feet Location: Outdoor storage Volume: 23,000 liters Cylinder wall thickness: 2.5 mm Product contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 3,400 mm Previous application: Food industry TANK Bottoms: Conical bottom Number of feet: 8 pcs HEATING/COOLING JACKET Internal temperature control: Full pipe coil INSULATION Knedpfsxqdpzsx Affjf Insulation material: Mineral wool Insulation thickness: 80 mm EQUIPMENT Manhole / Dome: On top head Discharge outlet: 34 mm TECHNICAL DATA / DIMENSIONS Ground clearance: 400 mm Bottom wall thickness: 3 mm AGITATOR 1 Agitator arrangement: Eccentric in top head Top head wall thickness: 3 mm

Condition: used, tank capacity: 4,000 l, GENERAL Design: vertical Remarks: Tanks slightly out of round; outlet is lower than tank bottom (consider during installation); cut-outs in the lid; nameplate only present on 2 tanks; 1 tank with ball valve (see photos) Internal diameter: 1,590 mm Total height: 2,200 mm Top: bolted lid with folding segment Location: Bremen Nameplate: Kodpjxqdnqofx Affsnf Volume: 4,000 liters Cylinder wall thickness: 3 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,000 mm Last application: cosmetics (shampoo) VESSEL Bottom: flat-bottomed EQUIPMENT Outlet: present Note: slight residues Outlet: 48 mm TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3 mm Top wall thickness: 1.5 mm

Condition: used, tank capacity: 2,000 l, GENERAL Design: horizontal Remarks: Manhole diameter approx. 445 mm (loose cover with metal cutout; cover rim and upper edge of the manhole slightly bent) Internal diameter: 1,110 mm Overall height: 1,600 mm Overall length: 2,400 mm Support type: height-adjustable feet Location: Bremen Nameplate: Volume: 2,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical length: 1950 mm Previous application: pharmaceutical industry TANK Number of feet: 4 Kodpfxoxqdnds Affonf EQUIPMENT Manhole/dome: on the tank Outlet: 50 mm MATERIAL SPECIFICATION Material of feet: stainless steel

Condition: used, tank capacity: 920 l, GENERAL Equipment: ball valve Design: upright Outer diameter: 1,140 mm Overall height: 1,600 mm Stand configuration: mobile on castors Location: outdoor storage Volume: 920 liters Cylinder wall thickness: 2 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 910 mm Kodpfx Aexqdkfsffjnf TANK Bottom: Klopper head EQUIPMENT Manway / Dome: in top head (DN 400) Outlet: available Outlet diameter: 45 mm TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2.6 mm Top head wall thickness: 2.6 mm

Condition: used, tank capacity: 30,000 l, GENERAL Equipment: Crane lugs Design: Vertical Internal diameter: 2,488 mm Total height: 7,100 mm Agitator: Propeller Base type: Feet Location: Outdoor storage Technical documentation: Drawing Nameplate: Volume: 30,000 litres Cylinder wall thickness: 6 mm Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 5,350 mm Last application: Chemical industry TANK Kodpfx Afsxqdh Djfenf Max. allowable operating temperature: 100°C Bottom type: Dished (Klöpper bottom) Number of feet: 4 pcs EQUIPMENT Manway / Dome: In cylinder, handhole Outlet: Flange DN65 Note: Slight residues/adherences TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm AGITATOR 1 Agitator arrangement: Side-mounted on cylinder Top wall thickness: 5 mm

Condition: used, tank capacity: 34,500 l, GENERAL Equipment: Drain valve, spray head, crane lugs Design: upright Remarks: Minor dents or scratches possible Internal diameter: 2,900 mm Knodpfx Afexqdhksfjf Total height: 6,533 mm Top end: conical bottom Support type: height-adjustable feet Location: Outdoor storage, Southern Germany Technical documents: Drawing Nameplate: Volume: 34,500 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 4,950 mm Last application: Winery TANK Bottom: conical bottom Number of feet: 4 pcs. EQUIPMENT Manway / dome: in cylinder, in top (DN 400) Outlet: DN65 DIN 11851 TECHNICAL DATA / DIMENSIONS Wall thickness, bottom: 4 mm Wall thickness, top: 3 mm

Condition: used, tank capacity: 1,100 l, GENERAL Equipment: Butterfly valve Design: Container Remarks: Frame (hot-dip galvanized); the top of this container is slightly dented, it has minor dings on the walls and one bolt on the manhole cover is missing Overall width: 1,230 mm Overall height: 1,980 mm Overall length: 1,030 mm Mounting type: Frame Location: Bremen Nameplate: Knsdsxqdcujpfx Affjf Volume: 1,100 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: Used Previous application: Cosmetics TANK Bottom: Conical bottom FEATURES Manhole/Dome: On top (DN 400) Outlet: DN65 DIN 11851 Note: Signs of use

Condition: used, tank capacity: 12,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Agitator drive missing Outside diameter: 1,960 mm Total height: 5,870 mm Knedpfoxqdayjx Affsf Support type: feet Location: external storage Volume: 12,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 4,020 mm TANK Number of feet: 4 pcs EQUIPMENT Manhole / dome: in top head (DN 500) Outlet: pipe end Ø approx. 50 mm MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 1 Agitator arrangement: eccentric in the top head

Condition: used, tank capacity: 5,500 l, GENERAL Equipment: Butterfly valve Design: upright Remarks: Agitator drive missing; Insulation jacket loose in several places (see photos) Internal diameter: 1,450 mm Total height: 4,400 mm Insulation: present Support type: feet Location: outdoor storage Knedpfxexqdatj Affof Volume: 5,500 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,350 mm TANK Number of feet: 3 pcs INSULATION Insulation jacket: riveted Insulation material: mineral wool Insulation jacket material: aluminium FEATURES Manhole / dome: in top head (DN 500) Outlet: pipe end, approx. Ø 40 mm MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 1 Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Level indicator (without guarantee) Design: vertical External diameter: 2,000 mm Internal diameter: 1,800 mm Total height: 5,200 mm Insulation: present Max. excess pressure: 5.00 bar Support type: height-adjustable feet Location: Bremen Technical documents: Drawing, TÜV certificates Nameplate: Volume: 10,000 liters Cylinder wall thickness: 5 mm Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 4,000 mm Previous use: Ice water tank in a dairy plant TANK Knjdsxqcpyopfx Affef Max. permitted operating temperature: 20 °C Number of feet: 4 pcs INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the cylinder Outlet: pipe end approx. Ø 40 mm Note: slight residues, outlet end cut off MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm