Used Soap Making Machine for sale (68,434)

Condition: refurbished (used), Year of construction: 2023, COLD FORMING CARLO SALVI 550/SV Completely Refurbished by HBR srl Possibility of having the version RF (with semitubular group). Machine with quick change system on K.O. cams. Range production: Csdpfxoqhndms Aiiori min. and max. wire diam.: 2 - 4,76 mm. max. cutoff length: 65 mm. max shank length: 50 mm. max production per min: 500 Motor Power: HP 7,5

Year of construction: 2018, condition: used, Roll production line König Artisan SFC Year of manufacture: 2018 Condition: cleaned & inspected Suitable for the production of ciabatta and square rolls Cjdpfx Aisz A Shasiori Hourly output: max. 300 kg of dough Dough belt height: min./max. 12mm/32mm, depending on the dough Dough belt width: 170 mm Dough belt flouring system for the top and bottom Guillotine and punch for a wide range of products Touch panel with recipe management Proofer with water bath, type: MOC-C300 Includes 3 cutting rollers for 1 to 4-row operation Includes 1 punching tool of your choice, subject to availability

Condition: refurbished (used), WP Formprofi Csdpfetrwfuex Aiiori

Condition: ready for operation (used), Year of construction: 2010, A fully automatic Eray transparent round can machine with Rinco ultrasonic sealer for the production of plastic-based transparent round cans for the food and beverage industry is available. Dosing capacity: approx. 800-1200/h, can diameter min./max.: 50.8mm/180mm, can height min./max.: 55mm/328mm, crimping per side: 6mm, max. cutting length: 340mm. Available diameters: SET 1: 50.8mm/80mm/110mm/150mm/180mm, SET 2: 65mm/95mm/125mm/160mm. Components: 1) Ultrasonic welding machine, 2) Cylinder box binding machine, 3) Ultrasonic box sole welding machine. Including accessories, crimping disks, contour wheels from a diameter of 50.8mm and length 340mm, oval module for oval cans built in-house in 2015 and 2x Lanico V 110 S can seaming machine for tin bottoms, built in 2012. Total system dimensions X/Y/Z: approx. 6000mm/2500mm/2000mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Cjdpfxouxu Ifs Aiieri

Condition: refurbished (used), Split into 30 bites Weight range: 32-70 g/piece. Adjustable height of rounding space including 3 plastic rounding plates complete gearbox in oil bath 400V - 3 Ph - 50 Hz motor serial motor protection Csdpfxett Am Ro Aiisri head opened for cleaning condition: very good (after general overhaul) Quantity of dough per tray (grams): 960-2100 Length x width x height (mm): 800 x 690 x 1470 Power (kW): approx. 1.6 Net weight (kg): 540

Condition: good (used), Year of construction: 1981, functionality: fully functional, SINGLE-DIE TUBULAR RIVET HEADER NATIONAL M5 Rebuilt on 2024. New electrical system. Operational, working. Available for any test. Crjdpfxetxni Nj Aiiji Number of die: 1 Number of pieces per min.: 300 Length Rivet: 20 mm. Depth of Pierce (max.): 5 mm. Cutoff diameter: 5 mm. Floor space (width): 1.300 mm. Floor space (length): 2.690 mm. Power of main motor: 7.5 KW Net weight: 3.100 kg. Gross weight: 3.700 kg.

Condition: used, Case maker - Crease and Presser Horizon HCM-1/ HCP-1 Buchdeckenmaschine - Bucheinhängemaschine - Case maker - Crease and Presser Horizon HCM-1/ HCP-1 Year 2009 - HCM-1/HCP-1 Serial-No. 312002 Book Block size min. 133.7x136.7mm, max. 297 x 215,9mm Cover Material min. 169.7x322x4mm, max. 333x502.8mm Credpfxs Af Alnj Aiiei Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 1996, MACHINE FOR PRODUCTION OF BLOCK BAGS Codpfozlahpex Aiisri Brand: MAC (ITALY) Description: machine for producing BLOCK bags with automatic break, year 1996, servo motors, automatic change of length, unwinding rolls with automatic brake 170 mm, longitudinal var with automatic thermoregulation, prefaltac for four runways (runway photocells each separately), head of brewing 120 mm station to handle and automatic stacking Bag with automatic clip, capacity 160-200 beats per minute x 4 lines Machine is in very good condition!

Condition: ready for operation (used), Year of construction: 1994, A bag making machine (packaging machine for industrial bags) Seydel is available. Working width: 1020mm, wrapping closure: one-sided/both-sided. Including cardboard flange feeder and deposit table with counter and advance. On-site inspection is possible. Credjvtqq Iopfx Aiiji

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Progressive Press SACMA SP260 5 Dies – Like new – Perfect working condition Available for any test at HBR srl. Completely overhauled Technical information: Number of dies: 5 Heading tonnage: 800 kN Max cutoff diameter at 500N/mm²: 11.5 mm Max cutoff length: 85 mm Crjdpjwar Efefx Aiiji Max kickout stroke (die): 65 mm Max kickout stroke (punch): 20 mm Speed: 275 pcs/min Power of main motor: 30 kW Die diameter: 54 mm Die length: 90 mm Punch diameter: 45 mm Net weight: 11,300 kg Gross weight: 13,000 kg We look forward to welcoming you at HBR srl in Calolziocorte (LC)

Condition: used, Year of construction: 2010, total length: 1,200 mm, total width: 500 mm, total height: 350 mm, Heating tank, 2 kW with pump for Lisec washing machines Crsdpfx Aiex Npvyoioi

Condition: used, • Load capacity 150 kg • Year of manufacture 2013 Codpswcm U Hefx Aiijri • Maximum pane/frame size – 1500 x 2400 mm • Machine no. – L-220.1743 • Price upon request

Condition: used, Manual sealer Reinhardt Csdpfx Asyf Eb Neiiori

Condition: ready for operation (used), A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder, folding table and deposit table with counter and feed. On-site inspection is possible. Cjdpjvtqrfjfx Aiieri

Condition: used, Video of the machine in operation available upon request. Here is the complete specification sheet based on the model: *ACIERA F5EP WORKING CAPACITIES:* - *Table: 800 x 300 mm* - 6 slots of 12 mm - *Travels: X 500 mm / Y 325 mm / Z 420 mm* - *Quill travel: 60 mm* - *Spindle / table distance: 365 mm* - *Spindle: ISO 40 - inclinable +- 90°* - *Speeds: 50 to 3400 rpm with continuously variable speed drive* - *Feeds: 10 to 600 mm/min in X/Y/Z* - *Rapid traverse: 1.5 m/min* - *Power: spindle motor 3 kW - Total 5 HP / 3.7 kW* - *Weight: 1600 Kg* Cjdpfxjzzpcbo Aiijri - *Dimensions: 1200 x 1600 x 1800 mm*

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Crsdpfx Aiezqt Dneiei Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Condition: new, Year of construction: 2023, functionality: fully functional, Sigmatek Central Processing Unit DCP646, new part originally packed Codozhg Ibspfx Aiiori 100MHz, 2MB memory HW: 5.6 X1.1 SW: 97030C-72

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 30-009, warranty duration: 6 months, total width: 660 mm, total length: 2,215 mm, total height: 1,620 mm, type of input current: three-phase, overall weight: 360 kg, year of last overhaul: 2025, GULLIVER IRIS 20 Dough Divider The Iris dough divider is designed for dividing both soft and hard dough. This machine is suitable for any bakery, providing precise and consistent portioning. The machine is equipped with an interchangeable blade system (from 1 to 6), allowing the weight and shape of the portions to be adjusted to suit specific products. The control panel with a computer allows for the operation of up to 30 programs. Portion weight range (depending on the number of blades): from 30 g to 1200 g Standard equipment: Csdpozuzx Ijfx Aiiori 1–3 stainless steel cutting blades flour dispenser restart system Optional equipment: 4–6 cutting blades, special blades

Condition: ready for operation (used), A bottom-seal bag/sack welding machine Stiegler is available. Film width: 1050mm, section length range: 90mm-650mm, max. operating cycle: 140/min, max. film web speed: 80m/min, max. roll diameter: 800mm, max. web speed: 60m/min, core diameter range: 76mm. Machine dimensions X/Y/Z: approx. 6000mm/1700mm/1600mm, weight: approx. 3400kg. Including 2 welding bars, punching device and Euro hole punching. The edge control of the machine is defective. Documentation available. An on-site inspection is possible. Cedpfx Aisy D Trzjieri

Year of construction: 2015, condition: ready for operation (used), This is an inclined wire paper machine for the production of filter nonwovens, filter paper, insulation paper, membrane carriers, cardboard, tablecloths and more, speed: 5-120m/min, flow rate: 2500-20,000l/min, the manufacturers are various companies from Canada, Ukraine and Europe, some modifications have been made to the system such as a new shredder, larger vacuum pump, vibrating screen for water treatment, second headbox, new distributor and more, an inspection is possible. Crsdjqzyaxjpfx Aiisi

Condition: ready for operation (used), Year of construction: 1991, A W+D envelope manufacturing line is available. Blank length range: 265mm-653mm, blank width range: 214mm-726mm, max. production output: 450/min, paper weight range: 80g/m²-150g/m², max. paper roll diameter: 1500mm, max. paper roll width: 686mm, window reel width range: 30mm-490mm, window material section length range: 55mm-280mm. Documentation available. An on-site inspection is possible. Credpsyyy Nlsfx Aiiji

Condition: ready for operation (used), Year of construction: 2012, This is a side seam wicket bag machine Lemo Intermat 850 STN-CP Knoter, production type: wicket bags for bread, chicken, diapers, toilet paper, hygiene products and other types of wicket bags, number of lanes: single lane / lane wicket, processable materials: LDPE, HDPE, PP and recycled extracts, sealing width (bag length): 120-450mm, draw length (bag width): 200-850mm, gripper arm length: 600mm, max. linear speed: 65m/min, output capacity: 140 knot bags/min, max. number of bags per stack: 250, drive system: PLC-controlled, operator interface (terminal), print mark control, servo motor drive, nip feed rollers, sealing bars. Attachments and accessories: bottom gusset (only bottom gusset included), handle unit, longitudinal sealer, pre-sealer, angle sealer, cross sealer, handle punch, photo cell for printed film, automatic one-step conveyor (index conveyor), handle hole punch, G-gusset unit, V-gusset station, web guiding system 1800mm, anti-static bars, automatic labeling system. Machine is in good condition. Codpfx Aiow U T T Ejieri

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: K08003, cutting length (max.): 650 mm, type of input current: three-phase, working width: 1,170 mm, input voltage: 380 V, NEWLONG 2036TS + 508HS Automatic Paper Bag Making Machine Manufacturer : NEWLONG Model : 2036TS + 508HS Year : 2008 Serial No. : K08003 Origin : Japan Condition : Good Working Condition Specifications • Bag Width : 200 - 360 mm • Bag Length : 260 - 590 mm • Cutting Length : 350 - 650 mm Csdpfx Aozmq T Eoiijri • Bottom Width : 70 - 210 mm • Max. Paper Roll Width : 1,170 mm • Production Speed : Up to 180 bags/min Main Features • Full Servo Controlled System • Gearless Drive • Shaftless Unwinder • Automatic Roll-fed Operation • Concealed Flat Paper Handle Unit (508HS) • High Precision Photo Cell Registration • Fast Size Changeover • Stable High-speed Production The machine is in good operating condition and can be inspected under power. Inspection and test run are available upon request. Please contact us for additional photos, videos, or quotation.

Condition: not inspected (used), Year of construction: 1994, functionality: unexamined, Part of a Lisec DGU line 2.5 x 2.0 m, 1992-1994, consisting of: RSV-27/25, 1992, frame set section Csdpfx Aortp D Aeiiori PSL-25/20, 1994, assembling station Both machines are in working order and can be seen in our warehouse in Hofkirchen/Austria

Condition: ready for operation (used), A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder. The machine is partially dismantled. Toothed belts must be tensioned and partially replaced. Toothed belt wheels are disassembled and must be installed. On-site inspection is possible. Cedpfjvtqrljx Aiijri