Used Packaging Machine for sale (73,284)

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Manufacturer – Giemme Thermo Packaging Machinery S.r.l. Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Gkjdpfxjyzxgfs Ak Usb Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister machine, manufactured in 1991. This is a high-performance, continuous-flow blister sealing machine with card feeder, suitable for film thicknesses of 150 µm to 400 µm (possibly higher, but not personally tested). The entire line is offered for sale (see pictures). Speed: 1–9 cycles/min with 4-up tooling. Example: fragrance dispenser, 4 units per blister tray = 2000 blisters/hour. Dimensions: approximately 9m x 1m x 2.25m. Sealing platen size: 57x32cm. The machine was 100% functional until it was dismantled and properly stored in our machine warehouse and was in operation until recently. Inspection of the dismantled system is possible on-site. An identical machine is still in operation on-site. A sample packaging can be installed for a test run to demonstrate the functionality. Location: Czech Republic (10 minutes past the Bavarian/Czech border from Furth im Wald). Gkjdpfx Akey Anifj Ujb

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! Gksdpfx Aezwgxrsk Usb For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh

Year of construction: 2002, condition: used, functionality: unexamined, machine/vehicle number: 2123, TECNOMACO ITALIA / FAMAR AP60 Blister Packaging Machine – Year 2002 TECNOMACO ITALIA S.r.l. – FAMAR AP60 Gsdpfezvycnjx Ak Uskb Italian Blister Packaging Machine Year: 2002 Professional industrial blister packaging machine designed for the packing of tablets and capsules in PVC/ALU blister packs. The machine is supplied with: -1 size part for tablets -1 size part for PVC/ALU blister packs, Configuration for 10-cell blister packs, Tooling suitable for capsules size “0” -Blister camera control system which costed 12200 eur in 2018 ) for automatic product inspection and verification inside the blister packs. Camera system installed in a dedicated stainless-steel protective enclosure mounted directly on the blistering machine Stainless-steel construction suitable for pharmaceutical and food-supplement production environments.The integrated camera control is designed to perform a product presence and blister inspection check, helping identify missing, incorrectly positioned, or potentially defective products before the blister packs proceed further in the packaging process. The FAMAR AP60 is a robust Italian-built blister packaging solution suitable for pharmaceutical, nutraceutical and food-supplement production, offering a compact and professional solution for PVC/ALU blister packing. Manufacturer: TECNOMACO ITALIA S.r.l. / FAMAR Model: AP60 Country of manufacture: Italy Year: 2002 Blister format included: PVC/ALU, 10 cells Capsule tooling included: Size “0” Additional tooling: One size part for tablets Inspection system: Blister camera control with stainless-steel protective housing Condition: Used industrial equipment. Sold as seen.

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Gksdpfx Akozvp Uyo Ueb

Year of construction: 2011, condition: used, Vacuum pump capacity: 100m³/h, final vacuum: 99.98%, vacuum chamber: aluminum, housing: stainless steel, power: 3.5kW. Machine dimensions X/Y/Z: approx. 900mm/820mm/1070mm. The machine is fully functional and has no gas flush system. Documentation available. An on-site inspection is possible. Gkodpfoz Aggaox Ak Ujb

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 2,000 mm, total height: 2,100 mm, total width: 1,300 mm, input voltage: 240 V, overall weight: 350 kg, pipe diameter (max.): 20 mm, product height (max.): 200 mm, product length (max.): 160 mm, product length (min.): 200 mm, Liquid filling machine for pouch packaging. The machine produces pouches from flat film by welding four sides. It is suitable for filling sauces, creams, salad dressings, and other liquids in the food, cosmetics, and non-food industries. Made in Hungary. The size can be easily adjusted from 10 to 70 grams. Easy to clean, reliable machine. Gsdpfx Aezv E A Tek Uekb

Condition: used, Year of construction: 2018, Materials for blister packaging: PVC + coated PVC, PETG + PETG, PET GAG + PETGAG, PS + Complex, operating mode: intermittent, max. output: 12cycles/min, forming film width: 180-350mm, max. forming film diameter: 400mm, max. forming film thickness: 500µm, film transport tolerance (motor): +/-0.2mm, forming area: 150-310x100-210mm, max. sealing pressure: 950kg, max. punching pressure: 10,000kg, max. forming depth: 60mm, sealing temperature: 80-200°C, vacuum pump power: 0.75kW, vacuum pump capacity: 20m³/h, forming heater power: 4.8kW, air consumption: 34m³/h, connected load: 13kW, length: 5530mm, width: 880mm, height: 1460mm, with documentation, Videojet 1520 continuous inkjet printer and Lauda Ultracool UC-0080 recirculating chiller. An on-site inspection is possible. Gsdpfxsz Agf Ns Ak Ujkb

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: SFV 80-N, Included with the machine: A wide selection of different forming dies for packaging timber products with various cross-sections. Machine documentation and operating manuals. Suitable for packaging planed timber and various other wood products. The machine can be inspected and tested on-site: Observe the machine in operation. Perform a test run. Gkjdjzuwcpspfx Ak Ujb Inspect the operation of the rollers, chains, and other mechanisms. Inspect all included forming dies. The machine is operating correctly and is ready for production.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 21A10, total length: 3,120 mm, total width: 700 mm, total height: 1,930 mm, overall weight: 600 kg, input voltage: 380 V, type of input current: three-phase, power: 5.5 kW (7.48 HP), Flowpack packaging machine for packaging with PPL reels, equipped with a die for euroslot hole on the sealing and cutting unit. Gksdexmkpgopfx Ak Uob

Condition: like new (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 16238, total length: 12,600 mm, total height: 1,500 mm, total width: 1,475 mm, type of input current: three-phase, product height (max.): 200 mm, product height (min.): 80 mm, product length (min.): 80 mm, product length (max.): 200,000 mm, product width (max.): 450 mm, product width (min.): 14 mm, input voltage: 400,230 V, working height: 900 mm, overall weight: 1,900 kg, input frequency: 50 Hz, space requirement width: 3,000 mm, This machine was bought in 2015 and has only been installed, calibrated and tested. We have never been in commercial use. Has only been stored in our room temperated warehouse. We planned to use it for own production, but not all plans are realized. Gkjdpfszzybhjx Ak Usb So this is a brand new packaging machine with roller conveyers and heat tunnel. All documentation is avaliable. The machine is located in Norway and can be inspected and tested here. We paid € 70.000,- for this machin inclusive heat tunnel and roller conveyors in 2015

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, total height: 17,000 mm, total width: 34,000 mm, total length: 23,000 mm, overall weight: 2,600 kg, compressed air connection: 8 bar, warranty duration: 6 months, pressure: 6 bar, working width: 2,400 mm, infeed height: 1,000 mm, power of the servo motor: 7 W, Equipment: documentation/manual, This is a used machines, fully refurbished and serviced by EMproject89. It is located in our facility in Serbia. Available NOW!! Gkjdpjd Sap Tsfx Ak Usb Specifications: BOXmaker PRO 2400S - automatic setup (set-up time up to 30 seconds) CAPACITY: up to 1200 boxes per hour (FEFCO 200) MACHINE DIMMENSIONS: 3400mm x 2300mm x 1700mm CARDBOARD TYPE: single, double, and triple wall up to 10mm and 1000GSM MAXIMUM BOARD SIZE: 2400mm X 7000mm MINIMUM BOARD SIZE: 200mm width x 800mm length Servo puller: 2m/s Slotting knives x2 Servo powered slotting subassembly (30% faster cycle) Creasing wheels with integrated Scalpels (longitudinal creasing and cutting off glue flaps) x2 Scalpel module (for longitudinal cuts) x2 Hand Holder Tool (making holes, die cut) Crosscutting Tool - Buying directly from the manufacturer EMproject89 - The machine was inspected, serviced, refurbished / a software update was carried out - The manufacturer does the installation and training - Extended warranty of 6 months - 20% discount on spare parts during the extended warranty period

Year of construction: 2016, condition: like new (used), functionality: fully functional, BÖHL JUNIOR S 450 VA fully automatic packaging machine / wrapping machine for spirally wrapping long goods with packaging material (typically stretch film) Product dimensions • Width: 15 – 220 mm • Height: 15 – 120 mm • Length: approx. 600* / 800 mm to 6,000 mm • Weight: approx. max. 3,000 kg / 6 meters including carriage - maximum cross-sectional diagonal of the product: 220 mm (customer-specific) Note: max. weight only possible if transferred with a powered, in-house conveyor system. (A) 600 mm* without carriage (B) 800 mm with carriage or distance between carriages min. 600 mm Packaging materials • PE stretch film, thickness approx. 17 – 50 μm (recommended 23 μm) • Roll diameter max. 400 mm • Roll width max. 125 mm • Core diameter 76 mm Specifications • Wrapping ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency-controlled) Technical data • PLC control Siemens S7 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 7 kW • Pre-fuse 35 A • Noise level 75 db (A) • Operating pressure 6 bar • Air consumption approx. 20 standard liters per cycle Technical section • Packaging material feed and mechanical pre-stretch system for 125 mm • Automatic clean-cut cutting unit for the packaging material • Electromotoric height adjustment of the wrapping ring • Automatic height detection of the product via light barriers Gkodpfjzn Ipysx Ak Uob • Packaging material tear and end detection • Pneumatic pressure rollers on the infeed and outfeed sides • Powered transport rollers on the infeed and outfeed sides in the machine • Quick-change device for packaging material rolls • Manually adjustable side guide plates as side centering in the infeed • SIEMENS frequency inverters for wrapping ring drive and feed • Complete electrical control, SIEMENS PLC S7 with touch panel • 2 m powered conveyor system with PU-coated rollers in the infeed area • 2 m powered conveyor system with PU-coated rollers in the outfeed area Packaging program - the following packaging programs are included: Wrapping - the product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product (edge protection). The overlap of the film during wrapping can be adjusted using a frequency inverter. Wrapping with intermediate bandages - the bundling points are activated by means of a timer. The product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product. In addition, stability bandages are wrapped. The transport is stopped after adjustable distances, and layers are wrapped in place for an adjustable time. The overlap of the film during wrapping can be adjusted using a frequency inverter. This program may eliminate the need for strapping bands in some cases. Bundling - the bundling points are activated by means of a timer. The product is not wrapped along its entire length. Film bandages are wrapped, and the number of layers per bundling point is adjustable. The distance between the bundling points can be preset via the timer. Continuous transport without wrapping Machine dimensions (without safety fence): • Length: 1,930 mm • Width: 1,500 mm • Height: 2,200 mm • Conveyor height: 900 mm • Machine weight approx. 1,600 kg Operating side: on the right in the direction of transport Paint: machine RAL 7032, gray The system is in VERY GOOD technical and optical condition.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory closure mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Optima CMF: Packaging machine Gkodpfoxqf U Sex Ak Ueb Application: For erecting and sealing folding cartons, ideal for complex vertical carton requirements. Products: Suitable for cosmetic products such as lotion, makeup bottles, and cream jars. Features: Uses robotics for precise placement of products and inserts such as spatulas, brochures, or flip-top leaflets. Flexibility: Can also be configured for food and chemical products in other versions of the machine.

Condition: good (used), Year of construction: 2023, functionality: fully functional, Cushion Pack CP 428 S2i/6 packaging cushioning machine (cardboard shredder) in fully functional condition: Godpfx Aezpwnzsk Uokb Year of manufacture: 2023 Power: 3 kW Cushion width: up to 420 mm Infeed height: 20 mm Shipping via a freight forwarder is possible after consultation. #8552-1

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, total height: 1,600 mm, total width: 1,600 mm, total length: 15,000 mm, overall weight: 6,440 kg, The equipment has been used very little, is almost like new, and has under 1,000 operating hours. Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 98 cm - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 280-700 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. Other specifications: - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. Gkodswqcrqopfx Ak Uob - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, - Grinding unit - Correction section - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 15000 x 1600 x 1600 mm - Weight: 6440 kg

Condition: used, This listing is for a Quickpouch Automated Form-Fill Seal Packaging Machine with Videojet Dataflex Printer for Quickpouch Auto loader. Manuals are available on request. Gksdoxzg Hqjpfx Ak Uob

Condition: used, Fully automatic packaging machine for products such as cans, glass bottles, and plastic bottles in shrink film, where the final output is multi-pack bundles with a defined number of products. The machine features robust Italian construction, high reliability, and quick format changeover for various product dimensions. Manufacturer: ZVT Model: PSP 032 S Maximum output: 30 cycles/min (two lanes) Output for 1.5 L bottles: up to 21,000 bph (multipacks 2x3) Gkjdpfxjxpn Eds Ak Ueb Output for 0.5 L bottles: up to 43,000 bph (multipacks 4x3) Electrical power: 94 kW Air consumption: 7 l/min/cycle Dimensions: Installation length approx. 10,000 mm, width approx. 1,700 mm, height: 2,000 mm. Complete and original technical documentation. Technical condition: used machine

Condition: ready for operation (used), Year of construction: 2008, Two Merz sachet machines for the pharmaceutical industry are available. 1) Merz Verpackungsmaschinen GmbH MP-2, year of manufacture: 2002, modified: 2008, pouch width range: 15mm-160mm, pouch length range: 15mm-200mm, filling volume range: 0.2ml-250ml, filling capacity: 100 cycles/min. 2) Merz Verpackungsmaschinen GmbH 091, year of manufacture: 1998, modified: 2000. Both packaging machines are duplex-capable. Documentation available. On-site inspection is possible. Individual sale possible. Gkedpjvcpz Rsfx Ak Uob

Year of construction: 2007, condition: excellent (used), Vacuum packaging machine VC999 07P, year of manufacture: 2007. Connection: 400V. Chamber dimensions approximately 88x50x15 cm, equipped with 2x CLFH 220 Rietschle vacuum pumps. Year of manufacture: 1998, power: 2x 5.5 kW. Gkjdpef Srcfjfx Ak Usb In very good condition, fully functional.

Condition: ready for operation (used), Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used. Gjdjif Elgspfx Ak Uokb

Condition: good (used), Fully automatic MOSCA strapping machine RO-TR 700-2 Manufacturer: Gerd Mosca GmbH Type: R0-TR700-2 PLC control Godpjtzbhcsfx Ak Ujkb Control panel for setting the operating modes, strapping distances, strap tension Automatic PP straps width 5, 6, 7, 8, 9 or 12 mm Operating voltage: 400 V 3AC Power consumption: 3 A Power: 2.1 kW Frequency: 50 Hz Castors: four swivel castors, two of which are lockable Overall dimensions: approx. 1350 x 1200 x 1650 mm (WxDxH) Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: like new (used), Year of construction: 2005, total height: 3,900 mm, total width: 1,700 mm, total length: 7,600 mm, type of input current: three-phase, overall weight: 4,000 kg, For Sale: Neat and in good condition: Brand: Affeldt type of conveyor: Affeldt E350 DG5 type of counter: Affeldt 275 8EV type of packaging machine: Affeldt 773 includes: conveyor belt + counting machine + vertical packaging machine Suitable for both PE and PP film. dimensions: (L x W x H) 7600 x 1700 x 3900 mm tube diameter: 180 mm weight approx. 4000 KG documentation and electrical diagrams available Year of manufacture: 2005 It has run very little and is complete. It is possible to inspect the machine at our location. Gsdpfsxztaqjx Ak Uskb If you have any questions or comments, please feel free to contact us. Kind regards, Leo Holland

Condition: excellent (used), Year of construction: 2017, REF: MM6171 1 X Audion CS-Matic 100 shrink wrapper. The Audion CS-Matic 100 offers flexibility for diverse product sizes. Its continuous side-seal system  accommodates a wide range of heights and widths, alongside unlimited product lengths. Smart integrated sensors automatically determine the perfect bag size, while the adjustable, PTFE-coated seal bar ensures high-speed packaging, achieving up to 4200 pristine packs per hour. Technical specification: Gjdpfxow Euzmj Ak Uskb ⚙️ Manufacturer - Audion Packaging Machines ⚙️ Model - CS-Matic 100 ⚙️ Year of manufacture - 2017 ⚙️ Power - AC Input 380-415V | 50-60 Hz | 2330 W | 10A Benefits: ✅ Very fast cycle - Up to 4200 packs per hour. ✅ Flexibility - Possibility of packing single packs or multipacks at any length. ✅Easy operation with touchscreen control systemm - Sealtime, seal temperature and belt speed can easily be adjusted. ✅ Automated sealing - Continuous cycle sealing. ✅ Motorized systems - Sealing bar and conveyors are controlled by an inverter and encoder. ✅ Wide film choice - The CS Matic 100 can handle polyolefin, polyethylene and pvc centrefolded film. ✅ User-friendly touchscreen - Easy navigation through the menu structure and safe control of all packaging parameters. ✅ Built-in safety features - An emergency stop button is standard equipped.

Condition: good (used), Year of construction: 1997, functionality: fully functional, Manufacturer: MOSCA, Model: RO-M-P2, Year of manufacture: 1997, Serial No.: 46957 Godpfx Akjy Ez Tis Uskb