Used Smoke Chamber for sale (3,462)

Condition: excellent (used), Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: width 1540 mm x height 2090 mm x depth 1240 mm Kdsdpfx Aeqxavaeg Aew Fan motor and door removed: Width 1540 mm x height 1940 mm x depth 925 mm Test chamber: Width 720 mm x height 690 mm x depth 560 mm Door, clear width: width 720 mm x height 690 mm Viewing window, heated: width 500 mm x height 600 mm Installation dimensions of the temperature test chamber with open doors Width 2340 mm x height 2090 mm x depth 2165 mm Feed-through opening 2 side panels, left ∅ 100 mm Temperature range -70°C to +180°C Heating: 3.0 K /min Cooling: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Water cooled Type series: T-40/600 Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Kdsdshxyg Hopfx Ag Ajw Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm Outer dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth, approx. 1850 mm Temperature working range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K temporally heating speed: 2,5 K/min cooling rate: 3 K/min Electrical connection 400 V +6% -10%, 3/N, 50 Hz rated power: approx. 5,5kW rated current: approx. 8,5 A Refrigerant: R404A Weight: 550 Kg Type: T-40/600 /011232 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a chamber circulating air furnace. Usable space dimensions : height mm 900 / width mm 600 / depth mm 600 324 liters Outer dimensions : height mm 1775 / width mm 900 / depth mm 953 Door leaf 1 Connected load: 3X400V 50 Hz 13 kVA Heating power: 12 kW Kdjdeigg Eqepfx Ag Ajw Nominal temperature: 300°C weight: 400 kg Type: KU 300/09-06-06 K111183701 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Feutron Type: 3416/17 Temperature test chamber Air-cooled Test chamber nominal volume: 280 liters Dimensions: Test chamber outside: width 1540 mm x height 2090 mm x depth 1240 mm Fan motor and door dismantled: width 1540 mm x height 1940 mm x depth 925 mm Test chamber: width 720 mm x height 690 mm x depth 560 mm Door, clear width: width 720 mm x height 690 mm Viewing window, heated: width 500 mm x height 600 mm Installation dimensions of the temperature test chamber with doors open Width 2340 mm x height 2090 mm x depth 2165 mm Through-hole 2 pieces side wall, left ∅ 100 mm Temperature range -70°C to +180°C Heating: 3.0 K /min Cooling: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW  Weight: 635 kg Kdjdpfx Ageu E N Tio Aow Refrigerant: R507 / R23 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a Weiss climate test chamber. Designation: SB2/500/80 water cooled Cold-heat operation: -75°C ...+180°C Climatic operation: +10...+95°C Humidity range: 10...98 % r. h. Temperature constancy, temporally ± 0.2K Humidity constancy: ±1 r.F. Temperature rate of change: Cooling: approx. 1.4 K/min Heating up: approx. 2.5 K/min External dimensions: Height 1980 mm, width 1265 mm, depth 1365 mm Feedthroughs: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/ 50 Hz Power: 10,4 kVA Weight: approx. 720 kg Kedpfx Aom Tvzcjg Ajdw Refrigerant R404a / R 23 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control unit Water-cooled Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm (refrigerant converted to R-452A) Test chamber capacity: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Data for operation: Test room lighting Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A Rated power 7.8 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1m from the front. 1m height 58 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Kdsdpfsrak Rmsx Ag Ajw

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control Air-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the function icons. all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Kdodsrak S Dspfx Ag Aew Data for operation: Test room lighting Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A Rated power 7.8 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1m from the front. 1m height 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Kjdert U Nujpfx Ag Ajdw Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a climatic test chamber. Air cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door disassembled: 1500 x 1940 x 925 mm test chamber: 720 x 690 x 560 mm Kdedoiz Tqcjpfx Ag Asw door, clear width: 720 x 690 mm viewing window, heated: 500 x 600 mm Temperature range +5 to +100 C heating: 4,0 K /min Cooling: 0.6 K /min Climate range +10 to +95 C Humidity range: 10 to 95 % r.H. Humidity difference, temporal: ≤ ± 3.0 Water connection humidifier: city water or distilled water 20l reservoir tank. Mains connection: 400 V 3/N/PE, AC, 50 Hz Power requirement max : 6,3 kW Weight : 500 Kg Type : 3416/16 Refrigerant : R134a For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Feutron temperature test chamber Ksdpjk Scxmjfx Ag Asdw Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door dismantled: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear width: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range -70°C to +180°C Heating: 4.0 K /min Cooling: 0.6 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you a chamber circulating air furnace. Usable space dimensions : height mm 900 / width mm 600 / depth mm 600 324 liters Outer dimensions : height mm 1775 / width mm 900 / depth mm 953 Kdjdpjigg Euefx Ag Asw Door leaf 1 Connected load: 3X400V 50 Hz 10 kVA Heating power: 9 kW Nominal temperature: 250°C weight: 300 kg Type: KU 250/09-06-06 K1030852 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Ksdewf Dh Nspfx Ag Aodw Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Kdsdpfxewh Ttmo Ag Aew Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7027-15 Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Kdsdpfxswl Argj Ag Asw Temperature Rate of Change: Temperature Deviation Temporarily ± 0.3 to ± 0.8 K Temperature Deviation Spatially ± 0.5 to ± 2.0 K Cooling Rate of Change: 18.0 °C Heating Rate of Change: 17.0 °C Test Chamber Dimensions: Width 580 x Depth 620 x Height 950 mm External Dimensions: Width 870 x Depth 1895 x Height 1775 mm Side Ports: 1 x 60 mm Ø and 2 x 120 mm Ø Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 16 kW Rated current 31 A Refrigerant R452A / R23 Approx. 270 liters Weight: 835 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Type: C-40/350 Ex/l Climate Test Chamber, Water-Cooled ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ ±3.0% r.h. over time The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Cooling unit: water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Rack: Stainless steel, support surface 620 x 600 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg Control system: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numeric input of setpoints Plain text fault messages RS 232 interface Ethernet interface Free switching channels for user-side test item control Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 7.15 kW Nominal current: 14.3 A Protection class: IP 54 Ksdpfxswvr H Uo Ag Asdw Sound pressure level

Condition: excellent (used), Vötsch Type: VCL 7003 Air-cooled climatic test chamber Test chamber capacity approx. 34 liters Kjdpfxsv Tnd Ss Ag Aedw Capacity for temperature tests: Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity over space ±0.5 to ±2.0 K Heating rate of change 4.0 K/min Cooling rate of change 3.0 K/min Heat compensation max. 550 W Temperature calibration value +23°C and +80°C Capacity for climatic tests: Temperature range +10 to +95°C Humidity range 10 to 98% Humidity deviation over time ±1 to ±3% Temperature deviation over time ±0.3 to ±0.5 K Spatial temperature homogeneity ±0.5 to ±1.5 K Climate calibration values +23 °C / 50% RH and +95 °C / 50% RH Test room dimensions: Width 350 mm, Depth 300 mm, Height 310 mm External dimensions: Width 640 mm, Depth 750 mm, Height 1730 mm Electrical connection: 1/N/PE AC 230 V ±10%, 50 Hz Rated current 11.0 A Rated power, max. 2.5 kW Sound pressure level 59 dB(A) Refrigerant: R-404 A / R23 Weight approx. 130 kg For your safety, please note the following information as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Climate test chamber C-55/1000 Li water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% RH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type C -55/1000/Li 1) C means: climate 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Kodpfxeva Hi Hs Ag Aodw Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C Climate tests: Temperature range +5 °C to +95 °C Humidity range 5% to 95% rel. humidity Dew point range +5°C to 78°C Temperature deviation ≤ ±1.0 K in time Humidity deviation ≤ ±3.0% relative humidity over time The technical data refers to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may influence the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), VLM Climate Corrosion Test Chamber Here we offer you a climate corrosion test chamber from the company VLM Name: Condensation test chamber (Corrosion test chamber) Manufacturer: VLM Corrosion testing technology GmbH Description: The chamber is designed for testing the corrosion resistance of metal materials and surface treatments by salt spray corrosion test (NSS) according to: DIN 50021 SS, ASTM B 117-73, ISO 9227 and other methods and condensation tests determined with a chamber volume of 400 liters. Material front door safety glass, clear shield layer on the inside Weight 140 kg External dimensions (WxDxH) 1100x670x1090 mm Internal dimensions of the test chamber (WxDxH) 800x605x920/733 mm Chamber volume 400 l Ksdok H Akgspfx Ag Asdw Door opening (WxH) 740×600 mm Maximum sample rod load 20 kg each Operating voltage 230 Volt Frequency 50-60 Hertz Connection 1.850W Control range of the test chamber max. 55 degrees Temperature controller Microprocessor controller PID Temperature stability ± 0,2°K Resolution of LED display 0.1°C Demi-water quality. Water max. 20 µS/cm Humidifier water consumption Approx. 0.5 l/24 hr Testing Approx. 0,4 l/h Water supply pressure 3/4" 2-4 bar Compressed air consumption Approx. 16 m3/h Type: Salt chamber SAL 400 V.713.062.000 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), RS simulators Here we offer a temperature test cabinet. Temperature test chamber water cooled Temperature range: -70°C to +180°C Time deviation: ±1 K according to DIN 50011 with empty test chamber Average heating time: approx. 3 K/min 8acc. to DIN 50011 part 12) Average cooling time: approx. 3 K/min 8acc. to DIN 50011 Part 12) Test chamber dimensions: Width 530 mm x height 530 mm x depth 530 mm Kdodpfx Agelp Hyts Aow Outer dimensions: Width approx. 900 mm x Height approx. 1800 mm x Depth approx. 1400 mm Total power: approx. 6 kVA power consumption: 12 A Main fuse: 3 x16 A, slow blow Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 600 kg Type: TS 150/75 Refrigerant: R404A / R23 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus Vötsch temperature test chamber Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VTS 7033 water cooled Temperature range: -70°C to +180°C Temperature deviation temporal ± 0,5 K Temperature deviation temporal ± 1,5 K Heating speed: 7,5 K/min Cooling rate: 6.5 K/min Test chamber dimensions: Width 825 mm x depth 800 mm x height 870 mm housing dimensions: 1080 mm x 1710 mm x 1950 mm lateral passage 12cm and 13cm voltage: 400V+6/-10%,3/N, 50Hz nominal power 9,5 kW nominal current 22 A refrigerant R404A / R23 approx. 570 liters weight: 580 kg For you as a buyer for safety the following information! Kjdolt U Avopfx Ag Ajdw The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored by calibrated equipment. Type: VTS 7033 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss Here we offer a Weiss emission test chamber. Mini - SHED for Diurnal Loss Measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (Usable 1600) mm. Housing dimensions: Width 1760 mm x depth 3100 mm x heights 2790 mm Max. floor load 250 kg Operating range +18 °C ...+45 °C, (at higher temperatures SHED operation is only possible without Tedlar bag) Temperature range +18 °C ...+45 °C Temperature constancy ≤ ±1 K (temporal) Temperature change rate, (heating and cooling) approx. 0.5 K/min., without test material Duct connection (air inlet and outlet) ∅ 80 mm, in chamber rear wall Shut-off valve, gas-tight (air inlet and outlet) ∅ 80 mm, gas-tight, pneumatic operation Delivery limit: connection flange of shut-off valve Cooling water consumption approx. 0.8 m3/h Voltage: 230/400 V; 3 PH + N + PE; 50 Hz Rated power: 4,1 kW Rated current: 14,0A Weight: approx. 2500 kg type: WT 5,1'/ + 18-45 Condition: used / used Sale ex location Scope of supply: (Only the Weiss emission test chamber WT 5,1'/ + 18-45 Mini-SHED) (Changes and errors in the technical data, specifications are reserved!) Kdodpfx Agjmfny Ie Asw Further questions we can answer on the phone for you.

Condition: used, Vötsch Model: VC 0018 Climate Test Chamber, Air-Cooled Test Chamber Dimensions: Width 580 x Depth 450 x Height 750 mm External Dimensions: Width 865 x Depth 1150 x Height 1780 mm Test Chamber Volume: approx. 190 liters Specifications for Temperature Testing: Temperature Range: -10°C to +90°C Temperature Deviation at steady state, according to IEC 60068-3-5, depending on chamber temperature over time: ±0.1 to ±0.5 K spatial: ±0.5 to ±2.0 K Temperature Change Rate according to IEC 60068-3-5 Heating: 0.6 K/min Cooling: 0.3 K/min Heat compensation in the range +20°C to +50°C: 200 W Calibration Points: +4°C and +90°C Specifications for Climate Testing: Temperature Range: +10°C to +90°C Temperature Deviation at steady state, according to IEC 60068-3-5, depending on chamber temperature over time: ±0.1 to ±0.3 K spatial: ±0.5 to ±1.0 K Humidity Range: 10% to 98% RH Kdedpfow Hz S Ujx Ag Ajw Electrical Connection: Rated Voltage: 1/N/PE AC 230V ±10% 50Hz Rated Power: 1.7 kW Rated Current: 9.5 A (neutral conductor plug loaded), Schuko approx. connection cable: 3.5 m Protection: 16 A slow-blow, provided by the customer Weight: approx. 380 kg net Refrigerant: R 134A For your safety as a buyer, please note the following information! The following points are carried out on all climate chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. If necessary, a refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors are excepted!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Kdodpfx Agew I Rxro Aew Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: good (used), Vötsch Model: VCS 7130-10 Vötsch Climate Test Chamber, Water-cooled Specifications for Temperature Testing: - Temperature range: -70°C to +180°C - Temporal temperature deviation at the center of the usable test volume: ±0.3 to ±0.8 K - Spatial temperature deviation: ±0.5 to ±2 K - Temperature gradient: 1 to 4 K - Temperature change rate: - Heating: 11 K/min - Cooling: 10.5 K/min Specifications for Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98% RH - Temporal temperature deviation at the center of the usable test volume: ±0.2 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1 K - Temperature gradient: 1 to 2 K - Temporal humidity fluctuation at the center of the usable test volume: ±1 to ±3 % RH Technical Data: - External dimensions (with hinges and door lock): - Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm - External dimensions (without hinges and door lock): - Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm - Internal chamber dimensions: - Height: 950 mm, Width: 1100 mm, Depth: 950 mm - Test chamber volume: approx. 1300 liters Feedthroughs: - The chamber is equipped with feedthroughs on both the right and left sides, allowing measurement cables and test devices to be routed into the test space. - 1 x R1 NW 125 mm - 1 x L1 NW 50 mm Test Chamber Lighting: - Halogen bulb 24 V, 50 W Electrical specifications: - 3/N/PE AC 400V ±10% 50Hz - Rated power: 34.0 kW - Rated current: 50.0 A - Fuse (to be provided on site): 100 A slow-blow - Max. heat emission to environment: 2.2 kW Permissible Test Specimen Weight: - Total load on grate supports: 100 kg - Chamber floor: 150 kg; Inserted rack: 50 kg Refrigerants: - R 404A / R 23 Kdsdpfx Aswynmxog Aew Weight: 1600 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and information!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), IVA Engineering Type: M5386 Environment and stability chamber Kjdpjd Nfrlofx Ag Ajdw Dry Hot Air Test Chamber Dry hot air test chamber Rated voltage: 415V AC/20A Dimensions: 90.55x78.74x90.55 in - 2204.60 lb 2300x2000x2300 MM - 1000 KGS Interior Dimensions: (height x width x depth): approx. 1950 x approx. 1230 x 1510 mm Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.