Used Smoke Chamber for sale (2,512)

Year of construction: 2004, condition: excellent (used), GRAEWE - SANDERN 2 CHAMBERS UNDERWATER VACUUM CALIBRATION TANK V-32-2-3, 3 meters long 2-chamber tank with 2 bypass filters Year of manufacture 2004 Without spraying / Full immersion calibration tank Djdjyc E Nnjpfx Adaeur Electric feed, forward and reverse

Year of construction: 2022, condition: new, We are selling NEW dividing chamber for divider W&P PARTA U 2001. The dividing chamber contains 1 metering piston, 1 main suction piston and 1 cutter. Everything new Dujdpsfhmf Ssfx Adasr

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN49983, Chamber furnace in very good condition. 12 months warranty. - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Fresh air and exhaust air with flaps, electrically operated by Belimo actuators - Inlet fan controlled via frequency inverter and regulator - JUMO control system (language can be switched!) - Additional drag element type S for external data logging - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current: 26 Ampere Duedpfx Adox U Ekdoaer - Connection voltage: 3/N/PE 400 VAC - Connection type: prepared for fixed connection with 32 A plug - Documentation and CE declaration We have several units of this furnace model in stock. Inspection by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, drying oven, tempering furnace, laboratory furnace, hardening furnace

Condition: ready for operation (used), A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Dsdjyvix Iopfx Adaour

Year of construction: 2025, condition: new, The PR EXC extraction arm is manufactured in accordance with the requirements of ATEX Directive 94/9/EC concerning equipment intended for use in potentially explosive atmospheres. The extraction arm meets the requirements of Equipment Group II for gases and dusts. The local extractor is therefore suitable for workplaces requiring the safe handling of explosive gases and dusts. The device is suitable for use in Zone 1 or 21; these are areas where an explosive atmosphere is likely to occur during normal operation. Application The design and features are unique, as highlighted: Exceptionally easy to handle, especially due to its stable positioning, the extraction arm features an optimally designed hood, maximum extraction efficiency, and maximum collection capacity. The ATEX environment PR arm is designed according to Fumex’s core principles: Support arms positioned externally Technical Data Djdpfx Aoygurmsdasur Length – 3000 mm Dimensions – Ø 160 mm Marked EX II 2 GD Load-bearing parts with electroconductive powder coating and plastic parts made from electroconductive polypropylene.

Year of construction: 2009, condition: ready for operation (used), A Köhler salt spray chamber for corrosion testing of materials and components is available. Test chamber volume: 1000l, temperature constancy: +/-1K, water pressure range: 2.5bar-5bar, internal dimensions X/Y/Z: 1250mm/950mm/760mm, machine dimensions X/Y/Z: approx. 2100mm/1400mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible. Djdpoyu T Dkjfx Adaeur

Year of construction: 2013, condition: used, Designation: Plant Growth Chamber Manufacturer: Weiss Technik / Vötsch Model: SGC120 Usable Volume: nominal 1,200 liters Interior Dimensions: 1310 x 675 x 1410 mm (W/D/H) External Dimensions: 1440 x 810 x 1975 mm (W/D/H) The Fitotron SGC 120 from Weiss Technik is a highly flexible plant growth chamber designed specifically for Arabidopsis cultivation, insect incubation, and tissue culture. It offers maximum usable area with minimal space requirements. Climatic conditions: Temperature range: Precisely controllable for day and night cycles via a color touch panel. Humidity: Optional humidification up to 80% relative humidity (RH) possible. Dehumidification: For seed storage, the system can reduce humidity to as low as 15% RH at 4°C. Usable Volume: The chamber has a nominal volume of approx. 1,200 liters. Dsdpfjyu Svlsx Adaeur Maximum Growth Height: Without shelves, the maximum growth height is up to 1,275 mm (depending on the specific LED or lamp configuration). Footprint: With a depth of just 810 mm, the unit fits through standard laboratory doors and requires only minimal floor space. Item condition: Used item as shown in the pictures. Please contact us if you have any questions.

Condition: used, Year of construction: 1987, volume capacity / length / mm Dodoyrt A Uepfx Adajur height / mm

Year of construction: 2000, condition: good (used), Cieffe FNCm 2.5/0.8/1500 hardening furnace chamber furnace 1120 °C Manufacturer: Cieffe Type: FNCm 2.5/0.8/1500 Max temperature: 1120 °C Series: 4185/1B Rated current: 70A 37 kVA 400 Volt Year: 2000 Maße: Dedpfx Adjnucgusasur Außen (L x B x H) 3000 x 1480 x 1750 mm Brennkammer (L x B x H) 2600 x 270 x 100 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2018, overall weight: 1,000 kg, volume flow: 2,000 m³/h, Herding Extraction System COMP 1500-8/9 SB Manufacturer: Herding GmbH Filter Technology Model: Herding COMP 1500-8/9 SB Year of manufacture: 2018 Type: Industrial Extraction / Filtration System Airflow rate: 2000 m³/h Weight: 1000 kg Control unit: Herding MP 12 Filter cleaning: Pneumatic pulse cleaning Machine ID: 28694 Machine ID: 28695 Duedpfxsyrndts Adaor CE marking: present Quantity: 2

Year of construction: 2024, condition: like new (used), functionality: fully functional, System Overview Complete modular chamber furnace system for batch homogenising of aluminium extrusion billets, electrically heated with jet-heating, waste-heat recovery, and full automation. CE-certified (Machinery Directive 2006/42/EG). Scope of supply: 1× Preheating furnace (BSN 1607) — electric, jet-heating 2× Holding furnaces (BSN 1608, 1609) — electric, forced air circulation 2× Heat-exchanger furnaces (BSN 1610, 1611) — unheated, forced air circulation 1× Charging machine (BSN 1612) — electric/hydraulic 12× Charging racks (BSN 1614) Control cabinet with Siemens S7-1515F 2PN (Profinet) PLC and operator panel Pusher thermocouples for direct billet temperature measurement Key technical advantages: Jet-heating for fast, uniform billet heating (typically 3–4× faster than conventional convection furnaces) Integrated heat-exchanger furnaces for efficient waste-heat recovery — reduced energy consumption and operating costs Overtemperature operation possible — shorter cycle times with direct billet temperature monitoring Suitable for homogenisation and/or solution heat treatment / ageing Modular design — suitable for new installations and retrofits of existing lines Dedpfxoyuvq Ts Adajur Ideal for: Aluminium extrusion plants and casthouses seeking to optimise energy consumption, CO₂ footprint, and throughput. Further technical details available upon request (PDF with full specifications).

Condition: used, Year of construction: 2020, Overview This chamber pasteurizer was manufactured in 2020 by German company RICO. The machine is designed for pasteurization processes and was previously in operation at a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Application: Pasteurization Configuration: Chamber pasteurizer 4x1, indoor installation Dedpfx Ajyqx Tpsdajur

Condition: excellent (used), Year of construction: 2022, 348 USED Koma set. Year of manufacture: 2022. EQUIPMENT: 1. RDV freezer: up to -28°C for 30 58x78cm trolleys Interior dimensions: - width 450 cm, - depth 354 cm 2. CDS refrigerated proofer: -20/+35°C for 14 58x78cm trolleys Dedpfx Aeyt Sv Aedasur Interior dimensions: - width 200 cm, - depth 354 cm 3. UK cold store: +2/+8°C for 20 58x78cm trolleys Interior dimensions: - width 330 cm, - depth 354 cm SET DIMENSIONS (in cm): - width 11 250, - depth 3,900, - height 300. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Dusdpfxjtq Ufvo Adasr Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2

Condition: used, Year of construction: 2001, Chamber pasteurizer, manufacturer: Rico, type: 4.5, for 4 Euro pallets 800x1200 mm in crosswise orientation—2 pallets side by side and 2 rows one behind the other, steam heated, made of stainless steel, insulated, featuring: Duedswhxq Depfx Adasr - automatic control valve and steam vent - 2 fan motors/fans on top - upward-opening lifting door with SEW drive - integrated control cabinet with controller and recorder for protocol/logging. Condition: used, cleaned, inspected

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Duedoxugq Aopfx Adajr Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 33639, A very well-preserved welding fume extraction unit ESTA type: SRF p 10, serial no.: 33639, year of manufacture: 1998 Duodpjyr Rprsfx Adaor

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SN48357, Chamber furnace with exhaust hood, in very good condition. 12-month warranty. - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Fresh air and exhaust air with dampers, electrically operated by Belimo actuators - Intake air fan controlled by frequency inverter and regulator - Stainless steel exhaust hood - Bentrup 507 control unit, thyristor control - Controller language: German only, switching to other languages not possible! - Additional drag element type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current consumption: 26 amperes Dusdpfstbq Eqjx Adasr - Connecting voltage: 3/N/PE 400VAC - Connection type: prepared for fixed installation, 32 A plug Supplied with a 12-month warranty. Viewing by appointment. Furnace, ovens, annealing furnace, industrial furnace, chamber furnace, kiln, enameling oven, tempering furnace, laboratory furnace, hardening furnace

Condition: new, Year of construction: 2026, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Maximum temperature: 250°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm Djdpsv Hg Euofx Adajur - Volume: 8,820 liters - Control: Eurotherm Nanodac Controller/recorder with color touchscreen display - 2 pcs. recirculation fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - 2 pcs. fresh air fans - Automatic dampers - Electrical design: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Temperature accuracy: +/- 6 K in an empty oven - Documentation, CE certificate of conformity - Electrical circuit diagram with spare parts list Note: The oven floor is not insulated but fitted with stainless steel sheet. This allows unrestricted entry for all track widths. Alternatively, an insulated floor can be offered (with customer-defined entry rails). We offer new and used industrial furnaces, which we can also retrofit and upgrade according to customer requirements. Furnace, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber furnace, heating oven, chamber recirculation oven, tempering oven, annealing oven, temper oven, annealing oven.

Condition: good (used), Welding fume filter, welding fume extraction, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, filter system, filter block -Manufacturer: Fischer Umwelttechnik, filter block exhaust air purification system type 4600 -Rated power: 2.2 kW -Individual components: see photos -Dimensions: 910/750/H2250 mm -Total weight: 226 kg Duedpfx Adjpm Th Eeajr

Condition: used, Year of construction: 1999, Technical details: pass through height: 2000 mm tank capacity: 800 l cycle time: - sec Heating capacity: 45 kW electrics - voltage/frequency: 400/50 V/Hz lifting capacity: 2000 kg temperature range: max. 65 °C total power requirement: 63 KW daylight opening: 2000 mm space requirements of the machine approx.: 3.800 m Dujdpfx Aoymc Txodaer *

Condition: like new (used), Year of construction: 2015, functionality: fully functional, overall weight: 990 kg, input voltage: 400 V, total width: 1,675 mm, total length: 1,619 mm, total height: 2,885 mm, volume flow: 5,000 m³/h, As new Ivat Air FTower-5.000. Dujdpeyrytgofx Adasr

Condition: excellent (used), 338 USED WP Garstop proofer. EXTERNAL DIMENSIONS (in cm): - Width 178, - Depth 240, - Height 245. INTERNAL DIMENSIONS (in cm): - Width 146, - Depth 206, Duodpfxsyrn R Ho Adaer - Height 197. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: excellent (used), CTS Type: CW-60/7 Walk-in Climate Test Chamber CTS Walk-in climate chamber 7 m³ Temperature & humidity testing from -60 to 120°C Description: For sale is a professional CTS climate test chamber, type CW-60/7. This is a professional walk-in climatic and temperature test chamber designed for industrial, research, and quality assurance applications. The system simulates extreme environmental conditions to test components, modules, or complete systems under realistic stress scenarios. The climate test chamber enables: - Temperature testing from -60°C to +120°C - Climatic testing with 10–95% relative humidity - Programmable temperature and humidity cycles - Endurance stress testing - Trend recording - RS232 / RS485 interfaces - Manual or automatic program operation Particularly suitable for: - Electronics testing - Solar modules (former application) - Automotive components - Materials testing - Endurance tests Airflow management ensures very uniform temperature distribution throughout the entire 7 m³ test chamber. Technical data: Temperature: -60°C to +120°C Change rate approx. 2 K/min Humidity: 10–95% r.H. Dew point range: +5°C to +89°C Refrigerants: R404A/R23 Max. allowable pressure: 25 bar III.6 Quick Start Instructions Volume: Test volume: 7 m³ Walk-in design (walk-in) Internal dimensions: approx. 1,400 x 2,200 x 2,250 mm (W x D x H) External dimensions: approx. 4,990 x 1,851 x 2,500 mm (L x W x H) Power / Connection: 400 V, 3/N, 50 Hz Rated power: 43.1 kW Rated current: 67.5 A Protection class: IP54 Weight: 4,000 kg Condition: used Delivery scope: (see pictures) (Specifications and technical data subject to change and error!) For further questions, please feel free to contact us by phone. Dujdpfxsylxaxs Adaor

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Dujdpfeu Tipkox Adajr Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location