Used Fume Cupboard for sale (465)

Condition: used, Laboratory fume cupboard, fume cupboard, suction -Input: 230 volts AC -Dimensions: 1200/875/H1255 mm -Weight: 176 kg Nwjdpfx Ahob Uhkhevoc

Condition: good (used), mobile welding fume filters, welding fume extraction -portable -Extraction port: 1 -Drive: 1 kW -Volume flow rate: max. 170 m³/h Nwedpob A Ng Isfx Ahvsc -Quantity: 1 available -Weight: 20 kg

Condition: good (used), Manufacturer: Fume Extractor Filter top: 280 x 280 x 20 mm Filter center: 270 x 270 x 230 mm Filter bottom: 280 x 280 x 30 mm Filter chamber: 360 x 360 x 270 mm Spigot diameter: 45 mm Performance: Nwedpoduiu Sofx Ahvsc Connection: Accessories/equipment: mobile Condition: good weight: 0,1 t dimensions: 400 x 630 x 750 mm

Condition: used, Year of construction: 2009, suction capacity: 16,000 m³/h, negative pressure: 2,500 Pa, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Nedpfsrk Itcox Ahvewc Fan on the clean side, which reduces the risk of explosion to a minimum. 15 Kw fan Capacity 16000 m3/h Vacuum 2500 Pa Filter cartridges - 13 pieces. Filtration area 260m2 Inlet diameter - 2x 560 mm Year of production - 2009 Dimensions of the device: height - 2.70m width - 5.70m x 1.85m weight - 2600kg

Condition: excellent (used), Year of construction: 2012, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. The device is equipped with a pre-separator and a mechanical spark trap. Nwedpfxoiypxij Ahvsc Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Donaldson Torit Model: DFPRO 12-CYCLO Year of production - 2012 Donaldson Torit Ultra WEB patron filter cartridges - 12 pcs. Filtration area of 215 m2 18.5 Kw fans. Capacity 11000 m3/h Vacuum 3900 Pa Inlet diameter - 500 mm We also offer on request new filter cartridges tailored according to the purpose of the device. Dimensions: height - 5.00 m length. - 3.50 m width - 1.70 m weight - 2200 kg

Condition: used, Year of construction: 2008, type of input current: three-phase, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, arm reach: 3,000 mm, Mobile welding fume extractor, dust extraction unit, self-cleaning filter, pneumatic, vacuum type KEMPER. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the device. Model: Filter-master XL Fan power: 1.5 kW Airflow: 1000 m3/h Vacuum: 3000 Pa Cartridge filter element. Njdpfx Aeymkq Sohvowc Stock no.: 1110

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Nodju S Tfgepfx Ahvjwc Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: used, Year of construction: 2005, type of input current: three-phase, filter area: 286.8 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extractor, self-cleaning pneumatic vacuum filter for continuous operation from the renowned brand Donaldson Torit. Suitable for plasma, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located after the filter on the clean side, significantly reducing explosion risk. Ultra Web filter cartridges are pneumatically cleaned with compressed air impulses during operation for high device efficiency. Fan power: 15 kW Capacity: 12,000 m3/h Connection diameter: 315 mm Filter cartridges: 12 pcs. Nedpfx Ajxxkzmjhvowc Filter surface area: 286.8 m2 Year of manufacture: 2005 Equipped with 'SparkTrap' spark arrestor system. Stock number: 1044

Condition: used, 6 St. 70/100 kg ca. 820 x 740x 560 mm weight ca.110 kg drawer measurements 450 x 600 mm Njdpsylcp Refx Ahvjwc Colour 7035/5012 RAL

Condition: ready for operation (used), Euromate MFS UltraFlex Mobile Extraction Unit Mobile Filter Welding Fume Extraction Airflow: approx. 800 – 1,500 m³/h Nwsdpsymlc Nefx Ahvsc Arm length: 4m Pipe diameter: Ø203mm You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop and check out our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Condition: good (used), Mobile station welding fume extractor.dust extractor,filter ESTA SRF K-10 Fan of 1.3 Kw (230V) located on the clean side. Extraction arm with a range of 2 m. Capacity 950 m3/h. Vacuum pressure of 2800 Pa. The SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust pollution. Nwodpolqw Igjfx Ahvec Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Year of construction: 1996, condition: used, Dust extraction,welding fume extractor,self-cleaning filter,cartridge filter for plasma,laser,sandblasting,shotblasting The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: STURM Model: 3-7x20/140 DLR P Year of production 1996 Nwsdpeif Rluofx Ahvjc Engine power 7.5 Kw Capacity 4200 m3/h Inlet diameter - 200 mm Cartridge filter cartridges - 7 pieces. Filtration area 140 m2 Complete with electrical diagram and partial piping

Condition: new, Year of construction: 2026, functionality: fully functional, A powerful, 2.8 kW and 5000 m3/h efficiency, sawdust extractor. Includes burlap filter bags. Machine description FM500 sawdust extractor is an efficient device of high vacuum power. Stable metal design and balanced rotor create a machine useful in any workshop. Burlap filter bags with up to 5 micron diameter filtering. Equipped with a splitter which allows up to 4 machines to be connected simultaneously. Maximum efficiency achieved when connected to 3 machines. FM500 features Metal balanced rotor Quick fixture of burlap bags Portable wheeled base Stable, metal design Bag holders High vacuum power Strong, 3-phase motor Capable of connecting up to 4 machines simultaneously Constant suction efficiency Technical data S1 motor power 2.8 kW Voltage 400V / 50Hz Motor rpm 2950 rpm Total dimensions 1525 x 560 x 2460 mm Efficiency 5000 m³/h Nwedpfevu Aqpsx Ahvec Vacuum up to 2500Pa Air suction speed up to 31 m/s Filtration bags burlap (II filtration degree) Volume of bags 480L Diameters of connectors 200 mm / 4 x (ø 100 mm) Weight 64 kg

Year of construction: 2018, condition: used, This listing is for the Bigneat Chemcap Ductless Fume Cabinet on Mobile Cabinet The unit is in full working condition and is ready for immediate use The Bigneat Chemcap Ductless Fume Cabinet is a recirculating fume hood designed to protect laboratory users from hazardous fumes, vapours, gases and particulates without the need for external ductwork. Instead of venting contaminated air outside a building, it draws air into the cabinet, filters it, and then returns clean air back into the room. This makes it ideal where installing conventional ducted extraction would be difficult, costly or disruptive. Filtration & Safety Chemcap™ carbon filtration: specialised carbon media to capture a wide range of chemical vapours. Optional HEPA filtration: for removing particulates as well as gases (available on some models). Recirculatory operation: cleans and returns air to the room, eliminating hazardous external emissions and reducing energy loss Usability & Convenience Benchtop or stand-mounted: sits on a lab bench or on dedicated support furniture. Portable and easy to install: no need for building ductwork. Clear acrylic panels: offer all-round visibility of the workspace Key Features & Benefits Ductless, recirculatory filtration: No connection to external ventilation required — ideal when installing ducted fume cupboards is impractical or costly. Chemcap carbon filters: Capture and retain hazardous chemical fumes and vapours; available in different types (e.g., organic, acid) depending on application. Optional particulate (HEPA) filtration: Adds protection against fine aerosols when required. All-round “Clearview” visibility: Transparent panels and enclosure give excellent 360° visibility of the interior. Portable: Stand-alone units that can be sited on or off benches as needed. User controls & safety: Touch-button control panel, service-due indicator and audible low-airflow alarm help ensure effective operation. Quiet and efficient: Typically operate below ~50 dB, with controlled airflow (face velocity ~0.5 m/s). Lockable access: Hinged doors and lockable front access help maintain containment. Chemical-resistant construction: Materials like epoxy-coated metal and clear acrylic resist corrosion and are easy to clean. Typical Applications These cabinets are used in labs where occasional or varied chemical handling creates hazardous fumes but installing full ductwork is not practical — for example: Small labs or teaching environments Supplementary fume control where existing fume cupboards are fully used Research or analytical workflows with intermittent fume-generating procedures Touch-button controls with a service-due indicator. Nwedpfx Ahjyliy Aovjc Quiet operation (~

Condition: used, This listing is for the Bigneat Chemcap Ductless Fume Cabinet The unit is in full working condition and is ready for immediate use The Bigneat Chemcap Ductless Fume Cabinet is a recirculating fume hood designed to protect laboratory users from hazardous fumes, vapours, gases and particulates without the need for external ductwork. Instead of venting contaminated air outside a building, it draws air into the cabinet, filters it, and then returns clean air back into the room. This makes it ideal where installing conventional ducted extraction would be difficult, costly or disruptive. Filtration & Safety Chemcap™ carbon filtration: specialised carbon media to capture a wide range of chemical vapours. Optional HEPA filtration: for removing particulates as well as gases (available on some models). Njdjyliq Iopfx Ahvjwc Recirculatory operation: cleans and returns air to the room, eliminating hazardous external emissions and reducing energy loss Usability & Convenience Benchtop or stand-mounted: sits on a lab bench or on dedicated support furniture. Portable and easy to install: no need for building ductwork. Clear acrylic panels: offer all-round visibility of the workspace. Touch-button controls with a service-due indicator. Quiet operation (~

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. Nwodpfxjhqd Tve Ahvoc The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Filtration surface 128 m2

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Nodpfx Ahorhidmsvjwc Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, Year of construction: 2010, type of input current: three-phase, filter area: 50 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic and vacuum-type, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2010 The filter is cleaned during operation by compressed air pulses controlled by a microprocessor, ensuring high system efficiency. Low compressed air consumption due to the "Power-Spray" system. The Filtercube central extraction and ventilation unit, equipped with cartridge filters, is the ideal solution for almost any problem involving smoke and dust filtration. The fan is positioned on the clean-air side, reducing explosion risk to a minimum. Applications: - Central extraction system for multiple welding stations - Extraction system for welding robots - Extraction system for thermal cutting and grinding tables - General hall ventilation system (push-pull or displacement system) - Extraction system in combination with extraction tables Nsdpfxsw Aw Nns Ahvswc - Extraction system for grinding non-explosive materials Specifications: - Soundproofed fan housing, power: 4 kW - Capacity: 5,000 m³/h - Negative pressure: 3,000 Pa - Inlet diameter: 315 mm - Filtration surface: 50 m² New filter cartridges tailored to customer specifications available on request. Stock no.: 1047

Condition: used, Year of construction: 2006, filter area: 31 m², suction capacity: 2,500 m³/h, Dust extractor, welding fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based, for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The Absolent TSF4F dust filter is built on the latest and most efficient filtration technology. Air is drawn into the filter cartridges, while most residual particles adhere to the outside of the cartridges. The cleaned air passes through the fan into the HEPA filter, which ensures a guaranteed and constant collection efficiency of 99.99%, capturing particles with a diameter of 0.3 µm. The HEPA filter is equipped with a manometer that indicates when the cartridge needs to be replaced. When the pressure drop across the filter cartridges exceeds the set threshold, the valves in the cleaning air tank open and a pulse of compressed air is released into the filter cartridges from the cleaning nozzles. Nedpfx Aoxu Hg Dshvjwc Make: Absolent Model: TSF4F Specifications: Fan power: 4 kW Capacity: 2500 m3/h Sound level (operation/cleaning): 60/85 dB(A) Filtration area: 31 m2 HEPA filter area: 24 m2 Stock no.: 1078

Condition: used, Year of construction: 2014, total width: 2,500 mm, total length: 5,000 mm, total height: 2,500 mm, Empty weight: 2.500 kg Price: On request Filter-area: 228m2 Capacity: 15.000 m3/h Nwodpfowrr Htjx Ahvjc - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 22653 - Control type: Herding MP 12 - Control: CNC - Motor power: 55.0kW - Transport dimensions: 5000mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 6 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, functionality: fully functional, All our extractors feature easy operation and a possibility of quick bag replacement. Wheeled base ensures portability. Metal rotor ensures silent and failure-free extractor operation. Affordable price in comparison to machine's efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of the burlap extraction bag Stable metal construction Default equipment 6 burlap bags Technical data Suction efficiency 4860 m3/h Bags capacity 3×200 L Number of bags 6 Extracting connector diameter 1×180, 4×100 mm Dimensions (L×W×H) 2355×590×2150 mm Weight 125 kg Motor power 3.8 kW Power supply 3-phase 400V User manual yes EC Declaration yes Njdpjvu Rx Iefx Ahvowc

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Price ex location: €650 (net) Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Nwsdpfx Ahjyhxl Rjvoc Availability: immediately Location: Waltrop

Condition: used, 6 St. Nodpfx Ahoyhhu Dsvewc 70/100 kg ca. 820 x 740x 560 mm weight ca.110 kg drawer measurements 450 x 600 mm Colour 7035/5012 RAL

Condition: like new (used), functionality: fully functional, Equipment: type plate available, Dust Hog Duster SG 801-100 dust extraction system in mint condition. The system was only used once for a test run; otherwise, it is unused and in excellent condition. Power: 1.5 kW Flow rate: max. 800 m³/h Pressure: 1,940 Pa Pneumatic filter cleaning Connection diameter: 200 mm Shipping available for €120. Njdpjv Iyybsfx Ahvswc #8095

Condition: excellent (used), Aerosol extraction and filtration Manufacturer: United Air Specialists Type: Mena 2000 Com. 13051 P: 1.5 kW Vmax: nom. 1700 m³/h pg: 1500 Pa U: 400 V Nwodpfx Ahsx Rp Eqjvoc F: 50 Hz I: 3.3 A tmax: 65°C Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!