Used Slant Bed Cnc Lathe for sale (13,798)

Condition: ready for operation (used), controller model: Num, empty load weight: 35,000 kg, total length: 11,000 mm, total width: 2,950 mm, total height: 2,000 mm, swing diameter over cross slide: 6,500 mm, Robuuste draaibank met 4 geharde lineaire geleidingen Maximaal werkstukgewicht: 20 ton bestemd voor staalfabrieken, walsgieterijen, smederijen voor het maken van producten zoals turbinerotoren, grote assen en staafproductie Swing over bed: 1400 mm Swing over cross-slide: 1100 mm Hjdpfx Ahswaiu Revoni Power on the spindle: 81 kW Chuck: 900 mm

Condition: ready for operation (used), controller model: CNC, empty load weight: 70,000 kg, total length: 10,000 mm, total width: 3,230 mm, total height: 1,900 mm, swing diameter over cross slide: 6,000 mm, Geharde draaibank met 4 geharde lineaire geleidingen Gewicht van het werkstuk tussen de centers: 20 ton Siemens aandrijvingen en motoren Heidenhain-linialen en encoders Super Lathe-principe/licentie van Binns Machinery (VS). De ultieme prestaties voor zware draaibanken, bedoeld voor staalfabrieken, walsgieterijen en smederijen voor de productie van producten zoals turbinerotoren, grote assen en staafproductie. Meest opvallende verschillen met een normale draaibank: Hedpowaivhjfx Ahveni veel breder bed = zeer hoge stijfheid = geen trillingen meer zwaar en omvangrijk vervoer ook voor stijfheidsdoeleinden zware werkstukken kunnen tussen de centers worden geplaatst het totale gewicht van de rollenbank is erg hoog Swing over bed: 1200 mm Swing over cross-slide: 850 mm Power on the spindle: 165 kW Number of speeds: 3 > 320 rpm

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10.500 mm Verlengd bereik van de robotarm (links en rechts): 3045 mm maximale werkstuklengte indien het een profiel betreft: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10.500 x 3045 mm max. werkstukhoogte: 3500 mm 13-positie gereedschapswisselaar: - 12 elektrische gereedschappen - 1 meetsonde Freeskop: Hnsdpfx Aev Sfk Hshvsi -SK40 - 10 kW op spindel 12.000 tpm / 15.000 tpm - 7,5 kW op spindel / 18 000 tpm - 4 kW op spindel / 24.000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit wijzigen naar één werkgebied (voor een groot werkstuk) of het opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken.

Condition: ready for operation (used), total height: 3,900 mm, total width: 2,900 mm, total length: 8,000 mm, controller manufacturer: Heidenhain, empty load weight: 13,000 kg, Type: TMML6-centrum Maximale afstand van kolom tot midden van spindel: 1210 mm (diepte van de kiel) Hodpfx Ahjv St Efeveni Gereedschapswisselaar met 30 posities Spaantransportband Kan achteraf worden uitgerust met nieuwe Heidenhain-besturing Originele tafel kan opnieuw worden gebruikt of een T-gleuf vloerplaat om hogere werkstukken te kunnen bewerken Longitudinal travel X-axe: 3023 mm Crosstravel Y -axe: 800 mm Travel Z-axe (Height): 1528 mm Dimensions clamping space - table: 4200 x 1000 mm Max Height of workpiece: 2000 mm Power on spindle: 20 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 50 > 1980 rpm

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: 65-P10-CF Zware frees- en boormachine Longitudinale X-beweging van de kolom: 24 meter Kruis Z-verplaatsing of spindeldiameter: 254 mm - verplaatsing: 2133 mm incl. adapter ISO-60 naar ISO-50 incl. vele verschillende verlengstukken voor spindel- en freeskoppen Kruisbeweging van de kolom in W-richting: 1219 mm (kogelomloopspindel) Totale verticale slag: 3352 mm! Verticale Y-beweging van de kolom: 4572 mm Gewicht van machine + draaitafel: 200 ton 4 geharde geleiders geïntegreerde smering Heidenhain CNC-besturing CNC-draaitafel continu: 4500 x 3500 mm Maximaal 60 ton op tafel Dwarsverplaatsing van de tafel: 2000 mm Oppervlakte t-groeftafels: 25.000 x 6.900 mm Hnsdpfoxpgf Aox Ahvei Gewicht van de T-sleuftafels: 180 ton Longitudinal travel X-axe: 24 000 mm Crosstravel Y -axe: 2133 mm Travel Z-axe (Height): 4572 mm Power on spindle: 85 HP / 65 kW Admission in millingheadspindle (ISO): ISO 60 (dia 254 mm) Max speedrange: 1,5 > 1200 rpm

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine tussen de kolommen: 2550 mm!! 5-assige freeskop koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Hnjdjv Sfkaspfx Ahvsi Power needed (KVA): 90 ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Year of construction: 2024, operating hours: 1,400 h, condition: ready for operation (used), - USED - 4-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 910 mm MAX ROTATING DIAMETER: 800 mm MAX TURNING DIAMETER: 420 mm BAR CAPACITY: 75 mm SPINDLE: 3500 rpm; 15-22 kW; ASA A2-8" ; 260 mm X-AXIS TRAVEL: 350 mm Y-AXIS TRAVEL: ± 55 mm Hnedpfxsyfivwe Ahvoi Z-AXIS TRAVEL: 750 mm RAPID FEEDS X-Z: 24 - 18 m/min DRIVEN TURRET HEAD: 12 ; BMT65 POS; 6000 rpm; 5,5-11 kW HIGH PRESSURE COOLANT: 20 Bar CONTROL UNIT: FANUC 0i-TF WEIGHT: 7300 Kg OVERALL DIMENSIONS: 4526 x 2152 x 2335 mm ACCESSORIES: AUTOMATIC TAILSTOCK ; SWARF CONVEYOR ; FANUC MANUAL GUIDE-I ; ETHERNET PORT ; USB PORT ; TOOL SETTER ; PORTABLE HANDWHEEL NOTE: COMPLETO DI: N.9 UTENSILI FISSI; N.1 UTENSILE MOTORIZZATO RADIALE; N.1 UTENSILE MOTORIZZATO ASSIALE

Condition: new, Year of construction: 2025, 0400 mm 1250 mm 200 mm 55 mm 315 mm Hedpfx Aowp Tckjhvsni 2700 U/min D1-6 DIN 55029 73 mm 140 mm

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm Hsdpfx Ajydqpiehvoni turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: used, Year of construction: 2007, turning diameter over bed 0140 mm turning length 285 mm control 810D Siemens turning diameter over bed slide 140 mm swing dia. 300 mm spindle turning speed - stepless 0- 5000 U/min- rpm spindle bore 45 mm Hsdpfx Ahsx Hpyyjvsni feeds 0- 12 m/min voltage 400 V connected load 14 KW face slide travel 250 mm longitudinal travel 285 mm dimensions of the machine ca. 2,7 x 1 x 1,6 m taper diameter VDI 20 mm main drive motor 10,2 kW weight of the machine ca. 1,7 t Machine is without live tooling and without tailstock.

Condition: used, GILDEMEISTER NEF 320 is a CNC turning lathe engineered for precision machining, high accuracy and operational reliability. Working capacities: max. turning diameter 320 mm, max. turning length 740 mm, centre height 160 mm, distance between centres 750 mm, spindle hole 52 mm; travels Z 700 mm, X 185 mm. Main specs: spindle power 11 kW, max. torque 410 Nm, speeds stepless 4–4000 t/min, spindle taper MT 6; tailstock Morse taper 5, spindle stroke 120 mm, spindle diameter 70 mm; rapid traverse X 8 m/min, Z 10 m/min; weight ~2000 kg, dimensions 2450×1668×1825 mm. Enables tight tolerances; typical applications include automotive, watchmaking, toolmaking, aerospace and medical sectors. Hnedpfx Ahoyn Ravjvoi

Condition: used, NAKAMURA-TOME WT-150 is a high-precision CNC turning lathe designed for accuracy and reliability. Capacities: swing over cross-slide 310 mm, spindle bore 51 mm, turning length 255/755 mm; X 207.5 mm; Z 300 mm; Y 2×±30 mm. Specs: 2 spindles, 2 turrets with 12 positions and driven tools, spindle speeds 60–6000 rpm, spindle power 7.5/5.5 kW, driven tools 3.2/2.7 kW, rapid traverse X=12/Z=40 m/min, 3×400 V 50 Hz, weight ≈8500 kg, dims 3850×2330×2320 mm. Accessories: lamp, high‑pressure coolant, parts catcher, chip conveyor, foot pedal, set of toolholders/steel supports. Achieves tight tolerances; suited to automotive, aerospace, medical and tooling. Hedpfsyn Raiox Ahvoni

Year of construction: 2022, condition: used, machine/vehicle number: 710370, max. bar passage: approx. Ø 42 mm, max. bar length: approx. 800 mm, 12-position tool changer, tool holder: VDI 25, 1 compressed air filter unit DSL 02D-SF-Goring 2-MBL, nominal flow rate: approx. 900 m³/h, 1 cooling unit HYDAC RFCS-AH-030, year of construction: 2021, serial no.: 2300040370, 1 hydraulic unit KNOLL TG 30, year of construction: 2022, serial no.: 1570792, 1 hydraulic cooling unit BKW ET22V-134-B-DI, year of construction: 2022, serial no.: 834179, 1 chip conveyor KNOLL 320 S-1/225, year of construction: 2022, serial no.: 2204044, control: BENZINGER Hnodeyn Nlkepfx Ahvsi

Year of construction: 2019, operating hours: 31,933 h, condition: used, machine/vehicle number: 710300, Weight: 4,200 kg, 7-position tool changer, handling robot YASKAWA YR-MA1440MH12-A00, year of manufacture: 2018, serial number: K17464-426-1, automation system/workpiece storage EGS Automation Benzinger, year of manufacture: 2018, serial number: 180103, SIEMENS control, tool monitor, chip conveyor KNOLL 320 S-1/225, year of manufacture: 2018, serial number: 1350025, HYDAC cooling unit, compressed air filter system DSL Sigmatec 15, joining module PROMESS UFM Line5 Hodpfx Aoyn Nkyehveni

Year of construction: 2018, operating hours: 32,615 h, condition: used, machine/vehicle number: 710299, Travel ranges (X/Y): 37/25 cm, Weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool Monitor, KNOLL 320S-1/225 chip conveyor, Year of manufacture: 2018, Serial number: 1350024, HYDAC cooling unit, DSL Sigmatec 1 compressed air filtration system, YASKAWA YR-MH00012-A00 handling robot, Year of manufacture: 2018, Serial number: K17752-594-1, EGS Sumo Ecoplex Automation Benzinger automation system/workpiece storage, Year of manufacture: 2018, Serial number: 180102, double, 1 auxiliary table Hedpeyn Nktjfx Ahveni

Year of construction: 2018, operating hours: 34,879 h, condition: used, machine/vehicle number: 710298, Travel paths (X/Y): 37/25 cm, weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool-Monitor tool monitoring device, KNOLL 320S-1/225 chip conveyor, year of manufacture: 2018, serial number: 2074174, HYDAC chiller, compressed air filtration unit DSL Sigmatec 15, YASKAWA handling robot YR-MH00012-A00, serial number: K17731-034-1, year of manufacture: 2018, automation system/workpiece storage EGS Sumo Ecoplex Automation Benzinger, year of manufacture: 2018, serial number: 180101, double position, 1 side table Hjdpfx Aeyn Nkmohveni

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, controller model: FANUC SERIES 18i-TB, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine within the specified period, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Turning length: 350 mm Turning diameter: 114 mm Spindle speed (max.): 8,000 rpm Bar capacity: 25.4 mm Centre distance: 445 mm Spindle distance: 485 mm X-axis travel: 100 mm Z-axis travel: 320 mm Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse Z-axis: 30 m/min Torque: 30 Nm Swing diameter over cross slide: 325 mm MACHINE DETAILS Control system: FANUC SERIES 18i-TB Hnsdpfx Asyn Nuxehvei Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,100 mm Total weight: 2,500 kg Control manufacturer: FANUC Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 26 A EQUIPMENT Tailstock Main spindle 12-position tool turret Driven tools (6 units) Y-axis

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Hsdpsyn Em Refx Ahvsni Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, CITIZEN CINCOM M 32 is a CNC automatic lathe / CNC Swiss type lathe delivering high precision, excellent accuracy and reliability. Working capacities: max. turning diameter 32 mm, maximum turning length 600 mm. Key technical specifications: rapid traverse 25 m/min; voltage 50 Hz 3x 400 V; machine weight about 3200 kg; overall dimensions LxWxH: 2800 x 1370 x 1790 mm. It achieves tight tolerances and is suitable for applications in watchmaking, medical, automotive, aerospace and machine tool industries Hsdoyn Eifspfx Ahveni

Condition: used, OKUMA LB 2000 EX is a CNC turning lathe designed for precision, high accuracy and reliability. Capacities: spindle hole 62 mm; max turning length 300 mm; max turning diameter 430 mm; travels Z 350 mm, X 260 mm. Specs: rapid traverse Z 30 m/min, X 25 m/min; stepless spindle 50–6000 t/min; power 50 Hz 3x 400 V; weight ≈3250 kg; dimensions L1900×W1750×H1850 mm. Equipment: 12-position turret. Capable of tight tolerances; typical applications: automotive, aerospace, medical, watchmaking, machine tools. Hnsdpfx Ajyn Ehbshvsi

Condition: used, OKUMA LB 200 M is a CNC turning lathe for high‑precision machining, accuracy and reliable operation. Capacities: turning Ø over cross‑slide 420 mm; swing over bed 530 mm; spindle hole 53 mm; max Ø 300 mm; travels Z 335 mm, X 180 mm. Specs: rapid traverse X 25 m/min, Z 30 m/min; spindle speeds 50–6000 t/min; 3x400 V 50 Hz; total power 16 kVA; weight ≈3300 kg; dims 2035×1720×1700 mm. Equipment: 12‑position fixed‑tool turret; tailstock Morse 4, spindle stroke 80 mm, Ø 55 mm. Enables tight tolerances; typical sectors: automotive, aerospace, medical, machine building. Hedpfx Ahjyn Eg Revjni

Condition: used, OKUMA LB 10 II M is a CNC turning lathe, engineered for precision, high accuracy and reliability. Capacities: swing over cross‑slide 340 mm, over bed 480 mm, max turning Ø 170 mm, spindle hole 51 mm, max length 300 mm, bar passage 42 mm; travels Z350/X150 mm; rapid Z20/X15 m/min. Turret 12 pos., 12 driven tools; C‑axis res. 0.01°; spindle 50–6000 t/min; voltage 3x400 V 50 Hz; weight ~3400 kg; footprint 2000×1640×1780 mm. Accessories: lamp, coolant system, bar feeder, chip conveyor. Enables tight tolerances; suitable for automotive, aerospace, medical, watchmaking and precision machine tool applications. Hnodpeyn Egwjfx Ahvei

Condition: used, TECHNICAL DETAILS Hnodjyfw I Uepfx Ahvoi - Number of axes : 10 - Number of spindles : 2 - Number of turrets : 3 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 22/29 [kW] - Spindle speeds : 7.000 [rpm] - Max. bar diameter : 42 [mm] - Max. chuck diameter : 110 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 16,5/19 [kW] - Spindle speeds : 7.000 [rpm] - Max. bar diameter : 42 [mm] * Max. chuck diameter : 110 [mm] - C axis indexing precision : 0,001 [°] - Travel : 500 [mm] - Rapid traverse rate : 60 [m/min] - Spindle / counter-spindle distance : 515 [mm] UPPER LEFT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 70 / 250 [mm] - Y stroke : 70 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 4,2 [kW] UPPER RIGHT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X stroke : 125 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 4,2 [kW] LOWER LEFT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 70 / 400 [mm] - Y stroke : 70 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 4,2 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 37 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5990 x 1710 [mm] - Machine height : 2140 [mm] - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 16759 [h] EQUIPMENT - CNC : Fanuc Series 31i-B - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] * with paper filtering unit - Coolant through spindle - Chips conveyor : DROITE - Cooling unit : KLH - Parts catcher - Parts conveying strip - Bar loader : IEMCA BOSS 552 HD/32L

Condition: good (used), Year of construction: 2017, functionality: fully functional, The machine is in very good technical condition; testing is possible by prior arrangement. Hnedeyr Spyspfx Ahvei

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table length: 3,500 mm, total height: 4,164 mm, total width: 5,875 mm, total length: 9,120 mm, rotational speed (max.): 6,000 rpm, workpiece weight (max.): 8,000 kg, overall weight: 29,000 kg, torque: 760 Nm, The Nicolás Correa Brava-30 fixed bed milling machine is designed for machining large workpieces where precision and rigidity are essential. This machine is equipped with a Selca S4045D CNC control and an automatic UAD head, featuring an ISO 50 spindle with 30 kW power and speeds of up to 6,000 rpm. The Brava-30 is suitable for applications ranging from roughing to fine finishing. Hnedpfxoulwy Aj Ahvoi The machine has a working table measuring 3,500 × 1,100 mm capable of supporting up to 8,000 kg, making it ideal for the mould, die and metal structures industries. Its features include internal coolant supply, chip extraction system, full enclosure guarding and measuring probes, ensuring reliability and efficiency in demanding industrial environments. It also offers a rapid feed of 30 m/min and a hydraulic clamping system that improves machining efficiency. With travel capacities of 3,000 mm on the X axis, 1,250 mm on the Y axis and 1,500 mm on the Z axis, this milling machine provides versatility and adaptability for a wide range of manufacturing tasks. Accesories: - Coolan System - Coolan Through Spindle - Handwheel - Tool Probe Heidenhain - Preparation Renishaw Touch Probe - Integral Splash Guard - Chip Conveyor (2 Chip Augers + Lateral 1) - Automatic tool changer (24 tools)