Used Slant Bed Cnc Lathe for sale (13,702)

Condition: excellent (used), Year of construction: 2000, 1 CNC lathe NAKAMURA-TOME TW20 with twin spindle and twin turret Year 2000 1 STAUBLI RX130 robot, control center Cedpfx Aisy Ta Saeljgw

Condition: excellent (used), Year of construction: 2000, 1 NAKAMURA-TOME TW20 CNC lathe with dual spindle and dual turret Year 2000 Codpfxsy Ta R Aj Ailegw 1 STAUBLI RX130 robot, control center

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, X-axis travel: 140 mm Y-axis travel: +/- 40 mm Z-axis travel (1+2): 450 / 410 mm Turning length: 750 mm Turning diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centres: 750 mm Max. bar diameter: 52 mm Spindle speed (max.): 4,000 rpm Main spindle speed range: 60 - 6,000 rpm Drive power - main spindle: 22 / 18.5 kW Max. torque: 198 Nm Counter spindle B-axis travel: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Number of turrets: 2 Number of tool stations: 2x 16 pos. Shank height for square tool: 20 mm Shank diameter for drills: 25 mm Turret indexing time: 0.2 s Tool holder: VDI 30 Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Cgedpfxjyyupmo Ailew Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Control: MSX 501 Fanuc drives Machine is in excellent condition

Condition: used, Year of construction: 2022, machine/vehicle number: 710370, travel distance X-axis: 180 mm, j.stumpf [at] ivg.auction Machine data • Year of manufacture: 2022 • Serial number: 710370 Travel distances Codezgrw Espfx Ailjgw • X-axis: 180 mm • Z1-axis: 260 mm • Z2-axis: 292 mm Tool system • Tool changer: 12-position • Tool holder: VDI 25 Additional units • Compressed air filter unit GÖRING DSL 02D-SF-2-MBL, nominal flow rate approx. 900 m³/h • Cooling unit HYDAC RFCS-AH-030, year of manufacture 2021, serial number 2300040370 • Hydraulic unit KNOLL TG 30-04/07533-1, year of manufacture 2022, serial number 1570792 • Hydraulic cooling unit BKW ET22V-134-B-DI, year of manufacture 2022, serial number 834179 • Chip conveyor KNOLL 320 S-1/225, year of manufacture 2022, serial number 2204044

Condition: used, Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, Manufacturer Gildemeister CTX 320 V5 Year of manufacture 2004 Condition: Used Control system: Siemens 840 D ShopTurn Operating hours: 60,000 h Spindle hours: 29,000 h Technical data: Turning diameter: 300 mm Turning length: 450 mm X-axis travel: 160 mm Spindle speed range - main spindle: 5000 rpm Spindle speed range - sub spindle: 5000 rpm Bar diameter: 65 mm C-axis: 0.001° Turret positions: 12 Tool holder: VDI 30 Driven tool stations: 12 Spindle speed of driven tools max.: 5000 rpm Rapid traverse X / Z: 60 / 45 m/min Total power requirement: 32 kVA Machine weight approx.: 4.3 t Space requirement approx.: 3895 x 2284 x 1885 mm Cgedpfx Aezh Ewheilow Accessories/Equipment Chip conveyor Parts catcher Conveyor belt C-axis Driven tools Documentation --Used machine, no guarantee-- --Errors and prior sale excepted--

Condition: good (used), Year of construction: 1997, operating hours: 38,000 h, functionality: fully functional, 1 used CNC lathe Manufacturer: Gildemeister Model: CTX 200 Control: Heidenhain Elekto Pilot 1190 Year of manufacture: 1997 Operating hours: approx. 38,000 hours Swinging diameter over bed: 440 mm Csdszh Ea Nepfx Ailsgw Swinging diameter over slide: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5000 rpm Turret: 12 stations Tool holder: 20 VDI Machine dimensions L x W x H: 2800 x 1651 x 1771 mm Machine weight: approx. 3000 kg Accessories: Coolant system Tailstock Documentation -- Used machine, no warranty -- -- Subject to prior sale and errors --

Condition: used, Make: Doosan Model: Puma V-550M CNC Vertical Lathe Year: 2012 Max. cutting diameter: 800 mm Max. cutting height: 750 mm Cgjdpfx Aiozh D Tuolsw 2,000 rpm 22/30 kW motor 12-position turret 380 mm 4-jaw manual chuck 1 angular milling holder Chip conveyor Fanuc 32iA control

Condition: excellent (used), Year of construction: 2015, DMG MORI NLX 2500 MC/700 lathe Year: 2015 M730M control system with CELOS-ERGOline Parts catcher Measuring probe Chip conveyor Cgjdpfxjzgkdkj Ailew 5 driven tool holders 2 ER32 axial tool holders 2 ER32 radial tool holders 1 end mill holder Very good condition, low operating hours.

Condition: used, Year of construction: 1999, CNC turning lathe PC turn 125, manufactured in 1999. Codezghvkjpfx Ailjgw

Condition: used, Year of construction: 2022, machine/vehicle number: 71.0363, CNC turning machine with a 12-position turret Travel / Working area • X-axis: 370 mm • Z-axis (without Y-axis): 260 mm Feeds • Speeds: continuously adjustable • Rapid traverse X: max. 45 m/min (370 mm) • Feed forces X: 3450 N • Rapid traverse Z: max. 45 m/min • Feed forces Z: 4600 N Main spindle • Spindle speed: spindle-dependent, up to max. 8000 rpm • Drive power: 12 kW S1 • Bar diameter: 26 mm Clamping device • Chuck: 80 - 160 mm • Short taper DIN 55026: Form A, size 4 Turret • Type: disc turret • Manufacturer: SAUTER • Number of tools: 12 • Tool holder: tool holder with cylindrical shank according to DIN 69880 VDI 25 Cgjdpfx Aiozggdyslsw • Drive power: 2 kW S1 up to 6000 rpm, up to 6 kW S3 40% duty cycle up to 6000 rpm • Max. tool length: from turret face to tool front edge 140 mm Technical data • Machine dimensions (width x depth x height): approx. 2309 x 1689 x 2014 mm • Weight approx.: 4500 kg

Condition: excellent (used), Year of construction: 2011, CNC Lathe with y-axis Csdoyyxzmjpfx Ailsgw MAZAK - QTN 250 MY MACH-ID 9483 Make: MAZAK Type: QTN 250 MY Control: Mazatrol Matrix Nexus Year: 2011 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1999, 1 Muratec MT12 CNC lathe with dual spindle and dual turret Fanuc CNC control Cgodpfx Asy Ta Steilsw Year: 1999 Supplied with all tooling and tool holders.

Condition: excellent (used), Year of construction: 2000, 1 Muratec MT12 CNC lathe with dual spindle and dual turret 4 axes Codpfx Aiey Ta Nfelogw Supplied with all tooling and tool holders Year: 2000 1 BOSS 542 CNC indexing head /32

Condition: excellent (used), Year of construction: 2005, 1 MURATEC MW200 CNC lathe Dual spindles, dual turrets Year: 2005 FANUC CNC control Includes: 1 Conveyor 1 Integrated air conditioning unit Cgodsy Ta Rpepfx Ailow 1 Fume extractor 1 Tool robot Supplied with all tooling and tool holders.

Condition: good (used), Year of construction: 1999, 1 MURATEC MT12 CNC lathe Double-spindle, double-turret Year 1999 1 STAUBLI RX90 robot with control center Csdpoy Ta Sgofx Ailogw All tooling and tool holders included.

Condition: excellent (used), Year of construction: 2005, 1. 5-axis CNC turning center, NAKAMURA-TOME Super NTJ Year 2005 CNC Fanuc Series 18i-TB Supplied with 5 tools And all tooling and tool holders Cgedpfsy Ta Hqjx Ailsw 1. LNS HYDROBAR SPRINT bar feeder

Condition: excellent (used), Year of construction: 1998, 1 Nakamura-Tome WT-250 CNC lathe with dual spindles and dual turrets 4 axes Cedsy Ta Ihspfx Ailjgw Year 1998 CNC: Fanuc Series 18i-T Supplied with 5 tool stations And all tooling and tool holders 1 Iemca MASTER 880/38/P bar feeder

Condition: excellent (used), Year of construction: 1999, 1 Nakamura-Tome WT-250 CNC lathe with dual spindle and dual turret 4 axes Year 1999 CNC: Fanuc Series 18i-T Supplied with 8 tool positions Cgodpfxey Ta Iuo Ailew And all tooling and tool holders 1 Iemca MASTER 880/38/P bar feeder

Condition: good (used), Year of construction: 2008, 1. 2008 MW120 MURATEC CNC twin-spindle, twin-turret lathe, including: Csdpfsy Ta Eyjx Ailegw 2. Integrated manipulators

Condition: good (used), Year of construction: 2005, 1. Two-spindle, two-turret CNC lathe, MW120 MURATEC, manufactured in 2005, including: 2. Two integrated manipulators. Csdpfxey Ta Ege Ailsgw

Condition: good (used), Year of construction: 2005, 1 CNC lathe with dual spindles and dual turrets, model MW120 from MURATEC, manufactured in 2005, including: 1 Integrated manipulator. Codoy Ta Dvspfx Ailsgw

Condition: excellent (used), Year of construction: 1998, CAZENEUVE CT 200 CNC lathe CNC NUM control Year 1998 Codey S T N Ajpfx Ailogw

Condition: excellent (used), Year of construction: 2001, DAEWOO PUMA V550M-2S CNC LATHE Cgsdpfx Aioy S Annjlsw Brand: Daewoo Model: Puma V550M-2S Type: Vertical CNC Lathe Numerical Control: FANUC Series 18-T FEATURES: – Large chuck – Power supply: 200/220V – 3-phase – 50/60Hz – Installed power: 103.8 kVA – Complete machine

Condition: used, Year of construction: 1999, turning length: 1,000 mm, turning diameter: 500 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, capacity: 1000 x 570 mm spindle bore: 80 mm multi-tool turret Siemens control steady rest Cgsdoy E Hvvjpfx Ailjw 3-jaw rotary chuck, 315 mm

Condition: not inspected (used), Year of construction: 2002, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle speed (max.): 2,500 rpm, overall weight: 5,000 kg, Fagor 8055 Cgjdpfx Aisx E Au Iolsw Spindle bore 108 mm Capacity 2000 x 570 mm Steady rest