CNC lathe

LEADWELL LTC-208

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 210 mm, travel distance Z-axis: 550 mm, 2018 LEADWELL LTC-208 CNC Turning Center - Maximum Turning Diameter: 380 mm Bwjdpfxs Ah Hwfe Aknjw - Maximum Turning Length: 440mm - X-Axis Travel: 210 mm - Z-Axis Travel: 550 mm - Hydraulic Chuck Diameter: 254 mm - Main Spindle Motor: 15 kW - Tool Turret: 12 stations - RECORDED RUN TIME: 518 HOURS 18 MINUTES 29 SECONDS - Electrical: 220 V / 3-phase / 50–60 Hz / 30 kVA - CNC Control: FANUC - Equipment: Tailstock, chip conveyor and coolant system Free loading at customer's truck

Condition: good (used), Year of construction: 2016, operating hours: 7,500 h, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 406 mm, spindle motor power: 18 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, Equipment: documentation/manual, Automatic measuring arm Chip conveyor Parts collector Set of tool holders, including 2 motorized ones Presetting tools Chip conveyor Parts collector Set of tool holders, including 2 motorized ones Bsdpfezzap Esx Aknoww

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 639 mm, turning diameter: 255 mm, spindle bore: 66 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 4,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 500 mm, spindle motor power: 15 W, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,030 mm, total length: 2,840 mm, total width: 2,190 mm, overall weight: 9,300 kg, Equipment: documentation/manual, This CNC lathe has been fully inspected and overhauled directly by the manufacturer, CMZ. The work included replacing the main components subject to wear, restoring the geometries, and completely realigning the machine, bringing it back to a condition of high precision and reliability. Bwsdpfx Akjzlymxensw Key features: - CNC FANUC 31iTB iHMI - Main and secondary spindles - Double turret with Y-axis - Removable tool presetter - Chip conveyor with lateral discharge - Second high-pressure coolant pump (8 + 15 bar) - Used IEMCA MASTER 80 bar loader available upon request Main overhaul operations: - Replacement of the B-axis slides - Replacement of the belts and seals of the main and secondary spindles - Installation of a new complete secondary spindle assembly - Overhaul of the B and lower Z axis guards - Restoration of the machine's geometries - Realignment of the S1 and S2 spindles - Realignment of the turrets - Complete check of the powered tools Upon request, we can provide a complete list of the operations performed and photographic documentation of the main stages of the overhaul carried out by the manufacturer. For over 30 years, Otto Machine has been selecting and selling used machine tools in Italy and abroad. The machines can be viewed at our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Condition: ready for operation (used), A Hwacheon CNC lathe is offered. Max. turning diameter: 680mm, swing over bed: 900mm, max. turning length: 1986mm, chuck diameter: 380mm, max. bar capacity: 116mm, max. spindle speed: 1800rpm, spindle power: 37kW/30kW, max. spindle torque: approx. 3071Nm/2493Nm, tool turret: 12 stations, tool interface: BMT-75, X/Z-axis travel: 360mm/2050mm, X/Z-axis rapid traverse: 18m/min, coolant tank capacity: 300l, control: Fanuc 0i-TF. Equipment: C-axis, driven tools, automatic in-process tool measurement, programmable tailstock and programmable quill, C-axis spindle clamp, chucking pressure monitoring, centralized lubrication and hinge-belt chip conveyor with chip container. Control ON: approx. 15961h, machining time: approx. 4258h, total part count: 34601. Weight: approx. 15000kg. Documentation available. Inspection possible by appointment. Bjdpfsznc Rrex Aknoww

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, turning length: 2,200 mm, turning diameter: 630 mm, spindle bore: 132 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 2,330 mm, bar passage: 117 mm, Specifications Chuck diam. 450 mm 11′ Capacity Turning length: 2255 mm 1st Spindle Spindle nose: A2-11 ASA Bar capacity: 117 mm Spindle speed: 10-2000 rpm Motor power: 30/37 Kw C axis: si degrees 1st Turret Motorized turret: 12 Tailstock Cone: 5 CM Maximum swing over bed: 775 mm Maximum turning diameter over carriage: 630 mm Bjdpsy Uk Eajfx Aknoww Maximum turning diameter over bed: 690 mm SPINDLE Spindle bore diameter: 132 mm Draw tube internal diameter: 117 mm Main spindle motor power: 30/37 kW Number of mechanical speed ranges: 2 Maximum spindle motor torque (continuous / 30 min): 1980 / 2450 Nm CARRIAGE X-axis travel: 350 mm Z-axis travel: 2330 mm X/Z axis motor power: 7/7 kW Carriage guide inclination: 45° TAILSTOCK Tailstock travel with carriage coupling: 2255 mm Quill diameter: 160 mm Quill travel: 150 mm Maximum quill thrust: 2851 kg Machine dimensions: 6521 × 2154 × 2374 mm

Condition: good (used), Year of construction: 2014, Traverses; 800 x 460 x 520mm, Table size 1000 x 460mm, Table load 600 kgs, Spindle speed 8,000 rpm, Bedpfx Akju Ehi Aenoww Spindle power 11/15Kw, spindle taper BT40, 24 station ATC , Fanuc I series, coolant, swarf conveyor.

Condition: ready for operation (used), Year of construction: 2007, Make: MAZAK Type of machine: QuickTurn Nexus 250-II Year of manufacture: 2007 Control system: Mazatrol Matrix Nexus Machine's weight: 5.200 kg Tool holder: BMT Speed range: 4.000 1/min Cutting diameter: 380 mm Turning length: 500 mm Tool turret - slots: 12 Pl. Spindle opening: 76 mm Bodpfey I Uviex Aknjww

Year of construction: 2023, operating hours: 500 h, condition: ready for operation (used), - USED - 3-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 640 mm MAX ROTATING DIAMETER: 600 mm MAX TURNING DIAMETER: 420 mm BAR CAPACITY: 75 mm SPINDLE: 3500 rpm; 15-18,5 kW; ASA A2-8 ; 254 mm X-AXIS TRAVEL: 210+30 mm Z-AXIS TRAVEL: 610 mm RAPID FEEDS X-Z: 18 - 24 m/min DRIVEN TURRET HEAD: BMT65 ; 12 POS; 4000 rpm; 4,5 kW CONTROL UNIT: FANUC 0i-TF WEIGHT: 6230 Kg Bwsdpfx Akoyy D I Ejnew OVERALL DIMENSIONS: 4017 x 1848 x 1819 mm ACCESSORIES: SWARF CONVEYOR ; FANUC MANUAL GUIDE-I ; ETHERNET PORT ; USB PORT NOTE: WITH No 7 FIXED TOOL HOLDERS; RENISHAW MANUAL TOOL SETTER

Condition: used, Year of construction: 2018, turning length: 735 mm, turning diameter: 315 mm, travel distance X-axis: 267 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 840 mm, Takisawa Japan TS-4000YS General Data Brand: Takisawa Japan Model: TS-4000YS Category: CNC Lathe Year: 2018 CNC Control: FANUC Series 32i-TB Bwsdpfoyxqqqox Aknew Capacity Max turning diameter: Ø 600 mm Max machining diameter: Ø 315 mm Max machining length: 735 mm Bar capacity: No. 1: Ø 81 mm | No. 2: Ø 40 mm Axis Travel X-axis: 267 mm Y-axis: -50 / +70 mm (120 mm) Z-axis: 840 mm A-axis (sub-spindle): 780 mm Main Spindle Spindle speed: 4,200 rpm Spindle/sub-spindle nose: ASA-8 Chuck diameter: 254 mm C-axis accuracy: 0.001° Spindle motor power (cont/30 min): 22 kW Sub-Spindle Spindle speed: 6,000 rpm Spindle nose: FLAT-140 Chuck diameter: Ø 210 mm B-axis accuracy: 0.001° Sub-spindle motor power (cont/30 min): 11 kW Turret Static/motorized turret stations: 15 stations (motorized) Driven tool speed: 6,000 rpm Driven tool motor power (cont/30 min): 7.5 kW Turning/boring tool size: 25x25 mm / Ø 40 mm Feed Rates Rapid traverse X / Z / A axes: 30,000 mm/min Rapid traverse Y axis: 10,000 mm/min Accessories - Right side chip conveyor - Spindle line transformer + air conditioner - 4 driven tool holders (2 radial + 2 axial) + various static holders - Renishaw tool presetter on main spindle - Removable Renishaw presetter on sub-spindle - Parts ejector arm on main spindle - Manuals, electrical diagrams, and CE declaration

Condition: like new (used), Year of construction: 2019, operating hours: 2,000 h, DOOSAN PUMA GT 2100 B LATHE YEAR OF FIRST INSTALLATION: 2019 CHUCK DIAMETER: 250 mm SWING OVER BED: 600 mm SWING OVER CROSS SLIDE: 390 mm RECOMMENDED TURNING DIAMETER: 255 mm MAXIMUM TURNING DIAMETER: 390 mm MAXIMUM TURNING LENGTH: 550 mm BAR WORK DIAMETER: 81 mm SPINDLE SPEED: 3,500 RPM SPINDLE NOSE: ASA 8 TURRET: 10 POSITIONS TRAVELS: Bsdpezak Dxsfx Aknsww X: 230 mm Z: 580 mm WEIGHT: 3,600 kg