Used Sinumerik 810 D for sale (47,457)

Condition: ready for operation (used), Siemens Sinumerik 6FC5312-0DA00-0AA1 control panel front, serial number: T-XD2021378, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Iedpfjx Dxn Eox Aa Eeaw

Condition: ready for operation (used), Siemens 6FX1130-5BA00 Sinumerik PLC Software EPROM Module E Stand B used, 100% functional Isdpfjxagpvsx Aa Esaw

Condition: new, Siemens Sinumerik 840D NCU 571, in original packaging with seal opened, E-version see photo, 100% functional. Iasdjxahugjpfx Aa Eew

Condition: ready for operation (used), Siemens Sinumerik 880 PLC 6FX1138-6BB00 / 570 386 9002. E-Stand E 00, used, minor signs of wear, 100% functional, scope of delivery as per photos Iodoxahumjpfx Aa Esaw

Condition: new, Siemens 6FX1120-3BC01 Sinumerik module board, version G, unused!!! in open original packaging, 100% functional. Iasdpfxji Ed N Hs Aa Eow

Condition: new, Siemens 6FX1121-8BB02 Sinumerik Sirotec circuit board in opened original packaging, 100% functional. Iodpfxei Ed Rke Aa Eoaw

Condition: ready for operation (used), Siemens SINUMERIK 802C 6FC5500-0AA11-1AA0 operator panel version C SN: C-A5E01169222, used, signs of use, 100% functional, scope of delivery as per photos Iajdpfjxaht Nsx Aa Eow

Condition: ready for operation (used), Indramat DDS 2.1-W100-D Controller, SN:254678-10563, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. Iedpfxex Etwgo Aa Eeaw

Condition: new, R. & S. Keller operating panel for Sinumerik 820 T, unused, in open original packaging, 100% functional. Iaodpfxji Ecl Sj Aa Esw

Condition: ready for operation (used), Siemens SINUMERIK 548 025.9015.04 System 3 operator panel with control unit SN: A1452596, used, in good condition, 100% functional, scope of delivery as per photos. Iaedpfx Aox Eu N Dja Esw

Condition: ready for operation (used), Siemens 6FX1122-8BB01 Sinumerik FBG digital output card, used, 100% functional Iodpfoxagnxox Aa Ejaw

Condition: ready for operation (used), Siemens 6FX1144-2BA00 Sinumerik interface E version B SN 580, used, in good condition, 100% functional Iasdpexagqtefx Aa Esw

Condition: new, Siemens 6FX1144-2BA00 Sinumerik Connection Interface Module Version B < unused - in opened original packaging, 100% functional Iedpjxagq Hefx Aa Esaw

Condition: ready for operation (used), Siemens SINUMERIK S3 TFT Monitor LCD84-0028a, serial number S4350, used, in good condition, 100% functional, scope of delivery as per photos. Iaedpfx Aoy U Eh Aea Eow

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 Iedpfxey Sub Hs Aa Eoaw • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT FB-450 MC with Sinumerik 828D Contouring control with “manual Machine” Universal Milling- and Drilling-Machine with Sinumerik 828D Contouring control and hydraulic tool clamping working area X450/Y350/Z400mm 7/10kW power Spindle speeds from 10-5000 U/min feeds from 10-5000 mm/min rapid traverse up to 5000 mm/min toolmaker accuracy DIN8615 tool clamping acc. DIN 69871 SK40 including:  linear guides  ball screws  vertical milling head +/-90° swivelling with 80mm sleeve stroke  swivel device for vertical milling head  hydraulic tool clamping  coolant equipment  LED-machine lamp Iedpjxapdcjfx Aa Eoaw  automatic central lubrication  rigid angle table 800x400mm  chip box  operating tools  dokumentation  executing with open work area protection (mode3)  controlled and manual version in one mashine  Sinumerik 828D Contouring control incl. Control unit in 3-Axis with ballsrews and servodrives, Conversational cycles entry with grapfic support: Drilling cycles for drilling, pecking, reaming and tapping on linear and circular hole patterns, Milling of rectangular and circular pockets and studs, Slot milling cycle, Face milling cycle, ... USB Interface,

Condition: used, Year of construction: 2021, operating hours: 7,246 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rotational speed (min.): 10,000 rpm, spindle speed (min.): 20 rpm, Equipment: chip conveyor, CNC machining center, used Manufacturer: DMG MORI Type: M1 - Plus Year of manufacture: 2021 Purchase / Acceptance: May 26, 2022, as a demonstration machine Operating hours: Spindle: 4,049 h Total: 7,246 h Control system: Siemens Sinumerik 828D + Job Shop Working area: X-axis travel: 550 mm Iajdpozbvqgjfx Aa Ejw Y-axis travel: 550 mm Z-axis travel: 510 mm Spindle: Speed: 20 - 10,000 rpm Power: 13/9 kW Mount: SK 40 DIN 69871 Tool changer: 24-position Equipment: - Renishaw 3D probe - Renishaw tool probe - Chip conveyor, left side - Coolant gun

Condition: new, maximum load weight: 98,290 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Gooseneck: * MAX810-H neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Hydraulically extendable/retractable and lowerable gooseneck. Length approx. 3,650 mm * Truck hydraulic connection with flow control (20 l/min), * incl. gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 l with MAX trailer couplings; otherwise, the customer must supply the couplings. * For SZM: 6 x 4 or 8 x 4 Loading platform MAX810-6-A-11.00-17.5-1.50-2.75-PA-X * 6-axle telescopic loading platform with bolt-tab coupling at the front and a slope of approx. 500 mm x 8° at the rear. * Length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * Hydraulic coupling bolt. PENDULUM AXLE 2-AXLE FRONT AXLE * All axles hydro-mechanically steered. * MAX810 chassis-PA-X-F-2-17.5-1.50-2.75 bolt-tab coupling at the front and rear. * Length: approx. 2,970 mm Chassis width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle chassis with standard grease NLGI-2 * Extendable widening elements by approx. 230 mm per side for a 2-axle chassis. (± 27 kg) PENDULUM AXLE 6-AXLE LOADING PLATFORM * All axles hydro-mechanically steered. * Hose burst valve on the axle balancing cylinder with automatic RESET function. Iasdpfx Aaozbfuhs Eow * Hydraulic cylinder with shut-off valves and quick-release coupling to secure in the raised position. * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle balancing. TIRES * 24 x manufacturer of our choice (M+S) 245/70 R17.5 * Load index 143/141L (146/146F) * TPMS: TPMS tire pressure monitoring system according to ECE R 141. Final coating of the axles * with 2 coats of 2-component paint, solid color in DB7350 Novagrau. * PAINTING Complete steel construction is automatically blasted with a shot-blasting system after welding. * Second blasting process with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * PAINTING Semi-trailer in carmine red (RAL 3002) Including the following accessories * Gantry with winch for spare tire on the front of the gooseneck. * 3.5-inch Kingpin * Steel front panel approx. 400 mm high. * Aluminum side and rear panels that can be attached to the gooseneck, approx. 400 mm high, in anodized design. * Control levers on the gooseneck protected by a folding cover. * Lighting for the controls on the gooseneck with on/off switch. * A 7-pole socket on the left and right rear of the gooseneck for the warning panel. * Load gauge on the gooseneck for axle load determination on the front and rear chassis. * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2. * Hydraulic connections from the gooseneck to the lowbed with screw couplings. * Access to the gooseneck. * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Power: 9.5 kW (12.9 HP) at 3000 rpm Emission level: EU Stage V Max. Hydraulic pressure: 280 bar Max. Flow rate: 21 l/min Mounted on the gooseneck. * Hydraulic oil tank 100 L Frame hot-dip galvanized (± 480 kg) * Hydraulic connecting lines between the power pack and the connector plate on the gooseneck. * Radio remote control: * Operation of the power pack, start/s

Condition: new, This Siemens Sinumerik SSD 80GB-SATA for PCU50.5 6FC5247-0AF08-6AA0 is for sale. Iasdpfxsrr Syij Aa Eew The item is brand new, the original box was only opened for inspection and for the pictures. The SSD itself is still in its original packaging. Shipped as seen. No signs of use. If you have any questions or are interested, please contact us. Shipping on request is no problem.

Condition: excellent (used), Year of construction: 2017, Type 1SD 810-50/5,50 IP 55 w- KI.F strom:3/360-44075,50 Kw 300 bar 8,83m3/Min H 830 W 420 Masch.nr:0216D0126400 Isdpfx Aoq Hd R Isa Eoaw

Condition: used, SIEMENS SINUMERIK HANDWHEEL HT6 HANDHELD Iedoyl Aaispfx Aa Esaw Condition: Used (working), incl. 3-day functional guarantee after receipt of the goods. receipt of the goods.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total width: 420 mm, total height: 830 mm, power: 5.5 kW (7.48 HP), Type SD 810-50/5,50 Machine no. 0916D0127852 current:37380-440V/50Hz motor: 5,5 Kw 2940 rpm 300 bar 8,83 m3/min 13,3 A Ijdpfx Aeq Hd Spsa Eeaw

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, Year of construction: 2024, operating hours: 1 h, Equipment: 4 in one shovel, cabin, In our offer you will also find: - FARMER 810 – Perkins - diesel engine, 3 cylinders, price: € 19,500 net. - FARMER 810 Turbo – KUBOTA - diesel engine, 4 cylinders, cardan shaft, price: € 21,000 net. The FARMER 810 model is the ideal equipment for agriculture, construction, electrical, plumbing, repair and similar industries. We also guarantee equipment service after the warranty period. Wheel loaders are manufactured on the basis and under the supervision of European technicians. The equipment is made of a strong structure, it can work in any conditions. TECHNICAL PARAMETERS: - Manufacturer: KINGWAY GERMANY - Model: 810 - Full cabin with heating, ventilation, lighting, rear view camera, radio, ENGINE DATA: - Engine: XINCHAI - Diesel - Cylinders: 3 - Emissions class Euro 5 - Max. rated engine power: 18.2 kW / 25 HP at 2800 rpm - Max. torque in Nm: 92.6 at 1700 rpm - Cooling system: Water-cooled - Noise level: 92 Db - Power supply: 12V - Battery: 12V / 60 Ah DRIVE Drive unit: Hydrostat (PWG ITALY) Drive speed (gear level 1): 0-20 km/h FILLING VOLUMES AND PRESSURES: - Fuel tank capacity 40 liters - Hydraulic oil tank capacity: 50 liters - Max. Hydraulic oil capacity: 42 L/min - Max. hydraulic oil pressure: 180 bar WEIGHT INFORMATION: - Operating weight: 2,300 kg - Max. tipping load: 1,600 kg - Max. lifting load (on the attachment): 1,000 kg DIMENSIONS: - Steering angle: 42° - Turning radius inside/outside: 1,869 mm / 3,172 mm - Lifting height (lower edge of standard bucket): 2,720 mm - Dumping height (with standard bucket): 1,950 mm - Dumping angle: 45 ° - Standard bucket: 0.5 m³ loading volume - Total length: 4,410 mm Iodpfx Aovz Ua Nea Esaw - Total width: 1,490 mm - Total height: 2,290 mm - Track width: 1,190 mm - Wheelbase: 1,690 mm TIRES - Standard: 31x15.5-15 field profile SPECIAL FEATURES: - very high-quality and robust workmanship - Euro mount (STANDARD) - lockable cabin, tank and engine hood - heating / ventilation - rear view camera - spacious comfort cabin - easy handling - very maneuverable!!! - compact and versatile - lighting system / street lighting - hydraulic quick-change system - third hydraulic oil circuit for attachments - CE tested according to the latest standards and guidelines - sale WITHOUT TAX possible (only with VAT number) - FINANCING possible SCOPE OF DELIVERY: - FREE delivery GERMANY-WIDE - A wheel loader / farm loader Farmer 810 - incl. shovel + fork (4in1 shovel on request) - hydraulic quick coupler - joystick control - 4x4 - all-wheel drive - EURO ATTACHMENT - ROAD APPROVAL - floating position - operating license for Germany For each of our loaders you can also order: - trailer coupling, - additional weights, - all possible accessories such as pusher, crocodile, snow plow, volume shovels, sweeper, grab shovel. PRICE: Net price €18,067 Gross price €21,500 WARRANTY: - Each machine has a 12-month warranty that can be extended for a further TWO years. - After the warranty period has expired, we ensure our customers have access to all spare parts. SERVICE: - We have our own mobile service that reaches all our customers in Germany and outside Germany.

Condition: used, PLC, control panel, operator panel, control machine Ijdpfsdpmmyox Aa Eeaw -Handover in the current state (broken glass) -The device is sold as working -Manufacturer: SIEMENS -Type: Sinumerik 810D/840D PCU50 -Dimensions: 482/310/H140 mm -Weight: 11.5 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Depositor for hot products, will connect to a cooking vessel and pump it into bags with set a weight which is adjustable Air operated clipper to seal the bag Finished clipped bags can go into a tumble chiller to cool down. Isdpfx Aoxgutpea Ejaw The machine is in good working order and ready for delivery Single phase electric 240 volts 50 Hz It needs an air supply