Used Sinumerik 810 D for sale (47,165)

Condition: used, first registration: 02/2016, Equipment: ABS, 3-axle swap body semi-trailer, make: DTec Flexitrailer up to 45ft, first registration: 02/2016, lift axle, central and rear extension, and much more. Kwsdpoytltbofx Ahvew Price: €12,500 plus VAT (19%) Errors and prior sale excepted.

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new; the machine comes from a very small joinery and was used only very little. The machine is in its original state and has only been cleaned, with no touch-ups to the paint. You can mill slots and drill dowel holes on two levels without having to reclamp the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 Kodpjynv E Refx Ahvjww With this machine, you can mill slots, for example for lock cases and similar applications, or make all types of frame dowel joints, at right angles, butt joints, or mitred joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar applications. By drilling on two levels, using the stops and indexing rails, and due to the machine’s design, dowel joints can be produced in a very short time, which makes the machine highly efficient. The machine requires a compressed air connection of 6 bar (air consumption is very low). Right-hand rotation. Mills and drills very efficiently and cleanly. Supplied with 2 angle stops (one center stop and one side stop, which can be used on either side), plus a mitre stop. On the front of the machine table, there is a 2000mm long stop rail with 2 flip stops; the stop rail can be shortened or extended if required. Workpiece clamping is done with 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic; the pneumatic switch is located at the front of the machine, ensuring rapid adjustment of the index positions and drilling levels. Equipped with a precision 12mm indexing rail, featuring a center index and 12 indices left and right. Can be quickly converted for slot milling; in this mode, the machine can be used without indexing, with 2 adjustable stops left and right, allowing for a maximum working width of 420mm. Maximum drilling hole height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything functions perfectly. The machine is personally delivered and demonstrated by us anywhere in Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible on request. The machine table is 870mm wide, 140mm deep at the sides, and 350mm deep in the center. Professional equipment, not DIY store scrap. Ready for immediate operation. With 2-jaw drill chucks up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushings are in excellent condition and move smoothly.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Thickness planer PANHANS Type 425 510mm The machine is in very good optical and technical condition. It comes from an assembly company and has only seen minimal use; everything is in original condition, with no components repainted. The machine has only been cleaned. Fully functional in all respects. - Equipped with kickback safety device - The planer knives are very easy and precise to adjust. Setting gauges, which can be mounted onto the cutterblock, are included to ensure maximum precision. - Chips are efficiently extracted thanks to the enclosed system. - Four-knife cutterblock for conventional strip planer knives. - The thickness table is mounted on two trapezoidal spindles, ensuring stability and torsion resistance - With protective hood, which can be lifted upward - Maximum planing width: 510mm; maximum planing height: 250mm - We provide personal delivery and demonstration throughout Germany for €220. This eliminates any risk at purchase. Delivery to other countries is also possible on request. - Quiet operation in compliance with DIN 45635 - Highly effective feed rollers; infeed and outfeed rollers are made of metal, with adjustable pressure on both rollers - There are two support rollers embedded in the table, which can be brought up when needed (particularly helpful when planing moist wood) - User manual included - Feed speed: 7 and 14 m/min, powered by a separate gear motor - 160mm extraction port - Thickness table elevates electrically, with fine adjustment via handwheel - Planing height is easily and precisely read from a mechanical counter - Achieves an extremely clean finish - 5.5 kW motor ensures virtually fatigue-free operation - The machine comes fitted with four sharpened knives - Extremely robust and durable design, top workmanship and highest quality - Ready for immediate use Kodpoxdu Tqjfx Ahvoww - 380V, 5.5kW - Speed: 5000 rpm - Year of manufacture: 1989 - Weight: approx. 800 kg - Certified GS tested version - Optimal, simple, quick, and safe operation - Heavy, solid, and durable construction—simply indestructible

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Kwjdsyc H R Topfx Ahvew Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)

Condition: used, axle configuration: 2 axles, first registration: 02/2011, loading space length: 10,500 mm, loading space width: 2,490 mm, loading space height: 2,670 mm, total length: 11,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 6,720 mm, color: other, Year of construction: 2011, Equipment: ABS, tail-lift, = Further Options and Equipment = - EBS (Electronic Braking System) - Tail lift - Central lubrication = Remarks = Number of axles: 2, Payload: 24,680 kg, Own weight: 8,320 kg, Gross weight: 33,000 kg, Kingpin size: 2 inch, Central lubrication, Suspension type: full air suspension, ABS, EBS, Body year: 2011, Axle type: BPW, Tail lift = Further Information = General Information Cab: Day cab Registration number: OL-06-GS Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; left tyre tread: 6 mm; right tyre tread: 4 mm Axle 2: Lift axle; left tyre tread: 6 mm; right tyre tread: 4 mm Weights Unladen weight: 8,320 kg Payload: 24,680 kg Gross vehicle weight: 33,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent traders of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer covers all European brands, model years, and price classes. Why buy at Kleyn Trucks? Easy! • Large, fast-changing stock • Recognisable quality • Competitive prices • Reliable business practices • We speak many languages Kwsdpfx Ahew Da A Tjvow • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The assurance of 'recognisable quality' • And much more.... Please visit our website for special offers and our full stock. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request through our website. Ask directly about our European warranty package.

Condition: good (used), D&K Europa System B2 Laminator The machine is 100% operational and ready to use. This advanced, high-performance machine is ideal for commercial laminating. Kwsdpfx Ahsynfvljvjw Technical specifications: Max sheet size: 540mm x 740mm Min sheet size: 210mm x 220mm Min weight: 115 gsm Max weight: 400 gsm Operating temperature: 80-145°C Weight: 750 kg 380V power supply Chrome-plated steel cylinder Pneumatic clamping, separation, and automatic high-stack feeding. Sheet feeding accuracy: ±2.0mm. Touchpad for easy operation. Sheet straightening module. Sheet discharge jogger.

Condition: used, Year of construction: 2017, Rotary table, indexing table Kjdpfx Ahjyl Swwsvsww Manufacturer: Expert Tünkers Model: EDX810/0250/8 Year of manufacture: 2017 8-station table (45° indexing) 18326

Condition: good (used), Mohr D 80 ECO Polar Guillotine Manufactured in 2012. Kedpsymxmbofx Ahvjww Very good condition, ready to operate. Mohr Polar is the most recognizable and respected brand of bookbinding guillotines in the world. Made in Germany. Working width: 800mm Stack height: 100mm Machine weight: 1000kg Power supply: 380V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Air table Photocells Intuitive operation Documentation, tools, spare blade, and a safety blade change tool.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 16035, Format (mm): 229x162 Max. Speed: 560 pcs / min. Paper weight (g / m2): 90 Counter : 53000 /h Kjdpfx Ahjh Icf Ueveww Performance data // Technical data The specified values are listed as the machine-technical performances using original W + D format parts and components. The achievable performance in practice depends on various parameters beyond our control, e.g. on the characteristics of the materials to be processed, the product and blank shape, window size and position of the windows, feed direction, position and type of the closure flap, as well as the print motif and printing ink. STANDARD The machine is used to print on both sides of pre-made envelopes and mailers with conventional offset printing inks. The printing units are arranged in satellite form around a central counterpressure cylinder. Power: Perfecting: perfecting: Max. 1200 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in double use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in single use Max. 500 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 229 mm in single use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 For format heights up to 180 mm in single use

Condition: excellent (used), mileage: 32,000 km, power: 77 kW (104.69 HP), fuel type: diesel, fuel: diesel, color: silver, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 3, Year of construction: 2022, Number of doors: 5 Cab: single Number of cylinders: 4 Engine displacement: 1,600 cc Technical condition: very good Visual condition: very good Kwedjw R Uucepfx Ahvew Damages: none Warranty: none

Condition: excellent (used), Protein cooker direct from Meat-free factory. 6 rack capacity. Lovely condition. Kedpfx Ahst R Skmovsww

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with the rear * 9-ton Valx axles with disc brakes Ø 430 mm * Rims ET 120 * Automatic lift axle on the first axle, * Operable via a switch on the chassis, or by actuating the service brake three times * With traction support, load increase on the 2nd and 3rd axle up to 130% below 30 km/h Kodpfxsyq Ufuo Ahvsww * Lifting / lowering controlled by the EBS modulator * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres as per manufacturer’s choice, with tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized container guides at the front * Upper side of the frame spray galvanized * Paintwork: 1 coat, 2K RAL 9005, matte * 15-pin connector * Flashing side marker lamps * Multichamber rear lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers (overall length >16.5m, 2 wheelbases) * Compatible with 40 ft (2 wheelbases), 30 ft, 2 x 20 ft, and 20 ft rear-flush containers Kwodpfx Aheyq Ufzsvew * 9-ton Valx axles with Ø 430 mm disc brakes * ET 120 offset rims * Automatic lift axle on the first axle, operable via a switch on the chassis or by pressing the service brake three times * Start assist: Axle load distribution to the 2nd and 3rd axles up to 130% below 30 km/h * Lifting/lowering controlled by EBS modulator * Tire size: 385/55 R22.5 * Fifth wheel height: 1,100 mm * Branded tires as per manufacturer's choice, with tire pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Upper frame surface hot-dip zinc sprayed * Coating: 1-coat 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-compartment tail lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S Ksdpfxoyq Ufnj Ahvoww * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with rear * 9-tonne Valx axles with disc brakes Ø 430 mm * Rims offset ET 120 * Automatic lift axle on the first axle * Operable via a switch on the chassis or by pressing the service brake three times * With traction aid, load on 2nd and 3rd axle up to 130% under 30 km/h * Raise/lower via EBS modulator control * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres at manufacturer’s discretion, tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Frame top edge hot-dip galvanized * Paint: 1 layer, 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-chamber tail lights

Year of construction: 2022, condition: used, functionality: unexamined, machine/vehicle number: S352621, S352622, S352623, Deburring system consisting of: 3 robot cells, each equipped with a KUKA robot KR10 1440-2 and deburring spindles, 3 safety enclosures with loading doors (one per robot), 1 hydraulic unit for clamping systems, 3 hydraulic clamping systems. For further details on condition and technical specifications, please refer to the attached appraisal report. Kodoyqycxopfx Ahvoww

Condition: used, axle configuration: 3 axles, first registration: 10/2003, total width: 2,470 mm, suspension: air, tire size: 385/65R22.5, Year of construction: 2003, Equipment: ABS, = Additional options and equipment = - EBS - Toolbox = Further information = Axle configuration Tyre size: 385/65R22.5 Axle manufacturer: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Kerb weight: 5,300 kg Payload: 37,700 kg Kwjdpfx Ahexzzwwjvsw Gross vehicle weight: 43,000 kg Identification Registration number: OH-08-HS

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Kjdpfxevt D D Uj Ahvjww Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: excellent (used), Year of construction: 2003, WEISHAUPT GL5 / 1-D, with gas train - Output: 200-940 kW - 20-79 kg/h - Year of manufacture: 2003 Kwjdpfxjwgyifj Ahvjw - Model: ZD

Condition: used, axle configuration: 2 axles, first registration: 10/2010, loading space length: 10,300 mm, loading space width: 2,500 mm, loading space height: 2,590 mm, total length: 11,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 6,720 mm, color: other, Year of construction: 2010, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 2, Payload: 24,180 kg, Unladen weight: 8,820 kg, Gross weight: 33,000 kg, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2010, Side wall material: insulated, Refrigeration unit manufacturer: Thermoking, Model: SLX Whisper, Cooling unit: Diesel/electric, Electrical unit hours: 1, Diesel unit hours: 3,893, Wall thickness: 45 mm, Type of cooling: Chilling and freezing, Axle type: BPW, Tail lift, Tail lift design: rear liftgate, Tail lift capacity: 3,000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: steel, Tail lift size: 250x200, Battery for access ramp = Further Information = General Information Cab: Day cab Registration number: OL-66-DV Drivetrain Fuel type: Diesel Transmission Transmission: Manual Axle configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lifting axle; Tyre tread left: 4 mm; Tyre tread right: 4 mm Axle 2: Tyre tread left: 6 mm; Tyre tread right: 6 mm Weights Unladen weight: 8,820 kg Payload: 24,180 kg Gross Vehicle Weight: 33,000 kg Functional Tail lift: Dhollandia, rear liftgate, 3,000 kg Refrigeration unit: Diesel and electric (3,893 hours diesel; 1 hour electric) Wall thickness: 45 mm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, model years, and price ranges. Kwjdpfsw Da Aysx Ahvow Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of "recognizable quality" • And much more... Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 2 axles, first registration: 10/2010, suspension: air, tire size: 385/55R22,5, wheelbase: 11,280 mm, color: other, Year of construction: 2010, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 2, Payload: 30,320 kg, Unladen weight: 11,680 kg, Gross weight: 42,000 kg, Suspension type: Full air, ABS, EBS, Year of body construction: 2010, Axle type: BPW = Further Information = General Information Cab: Day Registration number: OL-69-DV Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 4 mm; Tyre tread right: 5 mm Axle 2: Steered; Tyre tread left: 4 mm; Tyre tread right: 4 mm Weights Unladen weight: 11,680 kg Payload: 30,320 kg Gross vehicle weight (GVW): 42,000 kg Environment Emission class: Euro 0 Condition Overall condition: Fair Technical condition: Fair Optical condition: Fair Damage: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European makes, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Reliable, recognizable quality • Competitive prices • Trustworthy business practices • We speak many languages • We understand our customers • Assistance with import and transport Kwodpfx Ahow Da A Hevsw • (Export) registration plates arranged promptly • Expert technical services • The security of ‘recognizable quality’ • And more.... Please visit our website for special offers and a complete stock list. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send us an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Professional Harting hand crimping tool – model , dedicated for HAN D contacts. Used in industrial automation, electrical engineering, and low-voltage installations. • Wire range: 0.14 – 2.5 mm² (AWG 30–13) • Suitable for crimping contacts: HAN D 0.5 mm² and 1.0 mm² • Crimping force: 60–108N, depending on conductor diameter • Contact part numbers: 73300-200 and 73300-201 • Ergonomic handles, precise operation • Markings on the head: 0.14 / 1.0 / 1.5 / 2.5 mm² • Genuine industrial tool – Made in Germany Condition: very good – fully functional, ready for immediate use. Kwjdpfxow Su Nce Ahvew

Condition: used, axle configuration: 3 axles, first registration: 06/2005, color: other, Year of construction: 2004, Empty weight: 5.300 kg Axle 1: left 10 mm right 10 mm Axle 2: left 8 mm right 8 mm Kjdpfx Aoym Aimohvsww Axle 3: left8 mm righ 8 mm We have the possibility to stack trailers!

Condition: used, first registration: 11/2016, Equipment: ABS, 3-axle swap body semi-trailer, make: DTec Flexitrailer up to 45ft, lift axle, middle-rear extension, and much more. Price: €13,700.00 plus VAT (19%) Kodpfsymu Smox Ahvoww Subject to errors and prior sale.

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Kwjdpfsyi Dbpox Ahvsw Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: excellent (used), CATALOG NO. 6916 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - 2 sanding units: Upper: steel roller + pad + steel roller Lower: steel roller + pad + steel roller From above: - Pressure roller, steel - Sanding unit - Sliding pressure roller, steel - Cleaning brush - Feed belt Kedpsx Swtxjfx Ahveww From below: - Feed belt - 2 smooth sliding steel rollers - Sanding unit - Pressure roller, steel - Cleaning brush - Discharge roller - Electrically adjustable sanding height - Pneumatic oscillation of sanding belts - Infinitely variable feed speed regulation - Feed motor: 0.55 kW - Main motors: 2 x 4 kW - Air requirement: 6-8 bar - Extraction ports diameter: 3 x 80 mm, 1 x 120 mm - Overall dimensions (L/W/H): 1800 x 2070 x 2000 mm - Weight: 1422 kg – German manufacture, – unpainted – Very good condition, – used sander Net price: 25,900 PLN Net price: 6,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)