Used Short Bed Lathe for sale (15,709)

Condition: ready for operation (used), Year of construction: 1996, LZ lathe, make SASTA STANKO, type: SA562M, year of manufacture 1996 Swing diameter above bed: 500 mm Swing diameter above plan support: 290 mm Tent length: 1500 mm Spindle speeds: 16 2000 rpm Spindle bore: 55 mm Chuck diameter 250 mm Forkardt tool holder Multifix size C. Machine with rapid traverse X and Z axis Good general condition. For further information see data sheets. Dedpfsvkuauex Ab Tola

Condition: used, Seriennummer: 0419 Dledpfx Abswm Rrdj Tja

Condition: used, Year of construction: 1986, longitudinal travel 1200 mm vertical movement 600 mm cross travel 450 mm Djdpfx Aoxukppsb Tjla table-size 1500 x 600 mm max. table load 2 t spindle taper ISO 50 spindle drive 15 kW speeds 6 - 4000 U/min feeds 2 - 2500 mm/min rapid traverse 10 m/min voltage 400 V Bed milling machine with swivable spindle to horizontal or vertical. Control: Heidenhain TNC 155. Machine has an additional horizontal 4th axe.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Equipment: rotational speed infinitely variable, Citizen M32-2M3 CNC Swiss-type Turning Machine Year of manufacture: 2002 Control: Mitsubishi Meldas 635 Max machining diameter: 32 mm 7 controlled servo axes: X1/Z1/Y1/X2/Z2/X3/Z3 4 driven tools on the vertical holder C-axis: main and sub spindle Including accessories: FMB Turbo 5-42 bar feeder Extraction system Parts conveyor 5 driven tools for turret Dledpfex Dncfex Ab Tja 5 standard holders (turning/boring holders) for turret - Available immediately -

Condition: used, Year of construction: 1971, functionality: fully functional, Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 U/min Djdpjx Dmtcsfx Ab Tela dimensions: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150602, turning length: 1,190 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 440 mm, TECHNICAL DETAILS Travel X-axis: 230 mm Travel Z-axis: 440 mm Turning diameter: max. 320 mm Turning length: max. 1,190 mm Bar capacity diameter: max. 51 mm Swing diameter: max. 320 mm Spindle nose: A2-6 Draw tube thread: M60 x 2 Main spindle speed: 35–5,000 rpm Driven tool speed: 4,500 rpm Rapid traverse speed: 30.5/33 m/min Dedpfx Absx Dmm Ae Tela Turret stations: 24 Tool holder / Turret type: VDI MACHINE DETAILS Electrical and Safety Voltage: 400 V Protection class: 1 Connected load: 77.4 kW Footprint & Weight Footprint: 6.5 m² Machine weight: 7,900 kg EQUIPMENT Portal loader GL 100 F

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Chuck diameter: 250 mm Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. Dlodpfx Aev T Un Djb Tja The machine is in good condition and can be demonstrated under power. Machine documentation is available.

Condition: used, MOSTANA STANKO 1M65-5 HEAVY DUTY CENTRE LATHE MAKE MOSTANA STANKO, MADE IN USSR MODEL 1M65-5 YEAR MID 80s SWING OVER BED 1000.0 mm SWING OVER SADDLE 650.0 mm CHUCK SIZE 1000.0 mm SPINDLE BORE 135.0 mm SPINDLE SPEEDS 5- 500 RPM Dlsdsx Dmi Depfx Ab Tja SPINDLE POWER 22 Kw PLUS POWER FEED TO THE SADDLE METRIS AND ENGLISH SCREW CUTTING 1000.0MM 4 JAW CHUCK 2 AXIS DIGITAL READOUT CLEAN BED WORKED ON COMPOSITE, NO METAL

Condition: good (used), Internal item number: 25101 LuZ Lathe Weiler Condor From vocational school! + Heidenhain ND530 digital readout + Extensive accessory package consisting of: • Röhm 160 three-jaw chuck (mounted) • Klopfer 160 four-jaw chuck • 2x steady rests • MK5 arbor with center • Collet set (20 pcs.) • Multifix "B" base holder with one tool holder • Revolving (live) center • Various change gears • Operating manual / electrical schematic / mechanical manual Technical data: Center distance: 800 mm Center height: 160 mm Tailstock taper: MK3 Spindle bore: 29 mm Dledpfx Abex Dl Ure Tsa Speed range: 40 – 1650 rpm Dimensions (LxWxH): 180 x 750 x 130 cm Weight: approx. 800 kg

Condition: good (used), Year of construction: 2013, Distance between Centres 1250mm, Swing 470mm, swing over cross-slide 257mm, Spindle Speed 2500rpm, 80mm spindle bore, Prototrak SLX control, Dljdpfex Dk Svjx Ab Toa Quick change toolpost, manual 3 jaw chuck, Coolant, interlocked guards

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve Djdpfjx Dmrxsx Ab Tela

Condition: excellent (used), Year of construction: 2006, CNC cycle lathe WEILER E 50, year 2006 WEILER cycle control D3 Chuck 250 mm SCHUNK ROTA-S 250-62 Parat tool holder size 3 with 4 tool pockets Swing diameter over bed: 570 mm Swing diameter over cross slide: 340 mm Spindle bore: 83 mm Dedpfxjxd Diuo Ab Tola Centre distance: 1000 mm Turning length: 1100 mm Spindle speeds: 1-2500 rpm / Motor: 20 kW For all further details, refer to the data sheets. Machine documentation and data backups available, machine under power and ready for demonstration.

Condition: good (used), Year of construction: 2008, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, Dlodpfx Asx Dk Azeb Toa 52mm bar capacity, 12 station VDI30 turret, 14.7kW Spindle Motor, Spindle Speed 5000rpm, collet chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor, Barfeed.

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 Dlodpfjx Dmntsx Ab Tea With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Year of construction: 1996, condition: ready for operation (used), We have in stock a large inventory of used axle motors, mounts, etc.. Please ask for demand. From older and as good as new CNC turning and milling machines INDRAMAT / SIEMENS / FANUC / Dlsdpfegtmwtsx Ab Tsa

Condition: good (used), Year of construction: 1980, CNC Karuselldrehmaschine Fabr.JUNGENTHAL type: JU8F BJ. 1980 Modenisiert 2005 control HEIDENHAIN Manaul plus 4110. Max.Drehdurchmesser: 930mm Circular diameter max: 1100 mm Internal breakdowns min: 300 mm Turning length max. 520 mm Spindle speeds: gear-unit stage 1: 0-110 RPM Gear-unit stage 2: 110-300 RPM Power of main motor screw: 55-70KW Dledpfxjdnznke Ab Tea Complete machines documentaries available.

Condition: good (used), Year of construction: 1967, LZ-Lathe Fabr.WEIPERT TYPE:UD 500 e year 1967 with digital readout ,top support feed tool holder MULTIFIX size C ,Forkardt chuck 315 mm. Center height : 250 mm Center width : 1500 mm Dljdpju Rd H Ijfx Ab Tja spindle bore : 65 mm Spindle speed : 14 -1400 rpm Machine is in good condition .

Condition: good (used), Year of construction: 1975, Turret lathe HESTIKA Type:HR42 built approx. 1975 Spindle capacity max : 42 mm with turret head and tool holder Multifix Type:B Spindle speed: 88 - 2800 rpm Collet chuck device, coolant device, machine documentation. Dljdpfxjvgbqfe Ab Tsa Machine in good condition .

Condition: ready for operation (used), Year of construction: 1970, LZ-Lathe KERN Type:DS 20 AL Year 1970 with 3 jaws lathe chuck Forkardt 250mm, tool quick winder holder Multifix size C with holders coolant device. turning diameter overbed:500mm turning diameter overplane : 250mm centre distance : 1000mm Djdpfjgqxciox Ab Tola spindle speed: 12 -1200U/min Machine can be demonstrated under current Good guides .

Condition: good (used), Year of construction: 1980, LZ lathe, manuf. VDF HEIDENREICH&HARBECK, Type: 21 RO, year approx. 1980 Equipped with 2-axis digital readout Heidenhain ND 730, rapid traverse in longitudinal and cross directions. Chuck: 200 mm Forkardt. Toolholder: Multifix size B with 2 toolholders. 1 fixed steady rest and 1 traveling steady. Dledpfx Absw S Ituo Tsa Centre height: 240 mm Centre distance: 1250 mm Spindle bore: 55 mm Spindle speeds: 19–2000 rpm, motor output 5.5 kW Dimensions (LxWxH): 3.1 m x 1.2 m x 1.3 m. Weight approx. 2000 kg. Machine in good condition.

Condition: good (used), Year of construction: 1990, 2. Turret disks with tool holders. For CNC lathe OKUMA&HOWA 2SP Dljdpfx Aoxr Diwjb Tea

Condition: good (used), Year of construction: 2004, ELBERON Multipurpose Lathe Type: GRC300X750 Chuck 130 mm Dedswah Rqopfx Ab Tela In good condition. See data sheets for details.

Condition: good (used), Year of construction: 1962, Centre lathe manufacturer VDF HEIDENREICH&HARBECK type: 24 RO, year of manufacture 1962, overhauled in 1992. Equipped with 3-axis digital readout Heidenhain, 250 mm Forkardt chuck, Multifix B toolholder. Dedpfoxziuwsx Ab Tola Centre height: 255 mm Swing over bed: 510 mm Swing over cross slide: 270 mm Distance between centres: 1000 mm Spindle bore: 55 mm Spindle speeds: 20 - 900 rpm, Motor power: 6.5 kW The machine is in good condition, electrical diagrams available. Required floor space: Length 3 m, Depth 1.2 m, Height 1.3 m, Weight approx. 1800 kg.

Condition: good (used), Year of construction: 1985, CNC Lathe GILDEMEISTER Type: N.E.F. 1020 Year 1985 Control EPL 2 Turning diameter over bed : 1020 mm Turning diameter over face plates : 600 mm Turning length : 3000 mm Spindle speed : 5 - 1120 rpm Motorl.30 KW Spindle bore : 128 mm Tool turret Parat size : 4 with 10 holders Faceplate : 900 mm, steady rest, drill stand, chip conveyor, complete machine documentation and parameters available. Dljdpfxsqc Ul Aj Ab Toa Machine disassembled in stock. Complete weight approx. 12 000 KG. Further data see data sheets .

Condition: good (used), Year of construction: 1996, functionality: fully functional, CNC Lathe Manufacturer: HITACHI SEIKI Type: TF 20 Year 1996 Control: FANUC 21TB Chuck diameter: 210 mm Forkardt. Maximum turning diameter: 200 mm Forkardt Turning length: 250 mm Spindle speeds: 52-4500 rpm Spindle bore: 52 mm Tool turret with 8 positions Rapid traverse X and Z: 25 m/min Dljdjv T Uf Aspfx Ab Tja Machine without tailstock. Machine can be demonstrated under power. In good condition, complete machine documentation is available. For further information, see data sheets.