Used Sheet Metal Storage for sale (45,512)

Condition: new, Year of construction: 2025, machine/vehicle number: ZGS200, 200 l Capacity * 7.5 kW high-performance three-phase drive motor. * Adjustable speed control up to 300 rpm. * Control panel and dosing pump included. - The dosing pump automatically adds the chemical to the tank * Working hours timer * PLC panel programmable on request * PU or INOX plate * Replaceable valve for wastewater drainage. * Inner tank features channels and cavities to ensure a non-stick wall. Fpjdpjw Hb Tfefx Afien

Condition: used, Metal cabinet, workshop cabinet, storage cabinet with 2 sliding doors VIDMAR BORIK 2 sliding doors with roller guide Fpjdpfjxf Uuqex Afijn 8 rotary drawers Drawer dimensions: depth = 616/480 mm, width = 430 mm, height = 55 mm Width: 1440 mm Depth: 490 mm Height: 1000 mm - Rotary drawers height-adjustable in perforated grid - No key - Sliding doors move with difficulty Weight: 150 kg

Condition: excellent (used), With additional equipment Year of manufacture: 2014 Fjdpfx Afexfu Nzjiopn Serial number: A14052158 Max sheet thickness: 4 mm Cylinder length: 165 mm Arm outreach: 300 mm Cylinder speed: 15.3 rpm Motor power: 2.2 kW Dimensions (L x W x H): 1550 x 510 x 1180 mm Weight: 341 kg

Condition: used, Year of construction: 2009, operating hours: 60,000 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 2 mm, total width: 3,990 mm, The machine is well maintained Fedpfx Afsxiv Tpjispn

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity per storage section: 3,000 kg, total length: 3,280 mm, total height: 2,870 mm, total width: 3,300 mm, shelf height: 80 mm, warranty duration: 12 months, shelf length: 1,540 mm, load capacity: 30,000 kg, carrying capacity per cantilever arm: 3,000 kg, overall weight: 2,500 kg, load per truss pair (max.): 3,000 kg, frame width: 3,300 mm, number of shelf rows: 10, Sheet metal rack / high-capacity steel storage support system Fpodpfxoxhd Tbo Afijn Main features: - Rack doors are equipped with safety mechanisms during shelf extension; the shelf is locked in both closed and extended positions - Frame and door guides are linked, enabling the shelf to roll out on rollers - The shelf can be extended to 100% of its depth The rack specification provides exact values; it is possible to adapt the product to the individual requirements of the customer.

Condition: good (used), Year of construction: 1998, In good technical condition. Cutting length: 3,000 mm, max. capacity: 6 mm. Year of manufacture: 1998, weight: 5,500 kg, including new double-sided blades. Fodjxd Tcdspfx Afispn

Condition: good (used), functionality: fully functional, RADIAL drill MAS Fpodpexgtgbjfx Afien

Condition: used, Workshop overhauled Hydraulic guillotine shear LVD type HST 3100 / 13 Machine No. 19176 Year of manufacture 10 / 1991 Cutting length 3100 mm Fpjdswavmmopfx Afisn Cutting thickness 13 mm Backgauge 950 mm Working height 990 mm Hydraulic sheet hold-downs 17 units Hydraulic tank capacity approx. 160 litres Motor power 18.5 kW Electrical connection 400 Volt, 50 Hz, 21 kW - Motorized backgauge with ELGO positioning control - Cutting gap adjustment in 8 steps via lever adjustment with locking pin - Cutting angle adjustment from 0.5° to 3° - Cutting length adjustment via potentiometer - Left angle stop 2200 mm - Electric foot switch Required space without front table extension L x W x H 4200 x 2300 x 2150 mm Required space with front table extension L x W x H 4200 x 3900 x 2150 mm Weight 9 t Good condition

Condition: good (used), Year of construction: 1987, number of straightening rollers: 13, working width: 2,000 mm, sheet thickness (max.): 10 mm, overall weight: 32,000 kg, straightening roller diameter: 145 mm, max. sheet width / max. sheet width: 2000 mm max. sheet thickness / max. sheet thickness( St 50): 10 mm min. sheethickness Blechdicke / min. sheet thickness: 3 mm Anzahl der Richtwalzen / number of straightening rollers: 13 Walzen / rollers Richtwalzendurchmesser / diameter of straihgtening rollers: 145 mm Richtgeschwindigkeit / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Mittenabstand der Richtwalzen / distance b/n rollers centers: 150 mm Stützwaldermesser / diameter of bottom rollers: 290 mm Anzahl der Stützwalzen / number of bottom rollers 21/24 Anzahl der Abstützungen( oben/unten): 3 /3 Hubgeschwindigkeit der Traverse / speed of adjustm. of traverse: 0,71 mm / sec Hubweg der Traverse / way of traverse: -18 mm to +42 mm Fedpfoxgrnwsx Afiopn max. Schwenkung der unteren Traverse / max. swivel of lower traverse: 8 mm Hauptantriebsmotor / power of main motor: 30 kW Gewicht der Maschine / weight of the machine: 32 t

Condition: new, material width 1015 mm material thickness 1 mm speed von Hand Fjdpfx Afsupxdkeispn weight 240 Kg dimensions 1420 x 600 x 750 m

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: P-II-43/1380, The machine is operational, loading is included in the price, you are welcome. Fedpfjxgngcex Afijpn

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 74236-10, control type: CNC control, degree of automation: automatic, controller manufacturer: Prolink, working width: 3,100 mm, throat depth: 195 mm, bending angle (max.): 180 °, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, overall weight: 4,700 kg, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, Good condition metal folding machine CIDAN FORMA. It is a versatile solution that meets both series and one-off production needs. Fast, easy to operate, and user-friendly. Simple programming system – PROLINK with touchscreen control provides convenient programming. Quick tool change time allows setup time to be minimized. The FORMA model is equipped with a combined upper beam – always allowing the use of two different tool types: straight rail or segmented tools. Multifold version (where the upper clamping, lower, and folding beams all have segmented tools). Backgauge The FORMA backgauge is a rigid construction, driven by servomotor, ballscrew, and linear guides to ensure maximum precision and repeatability. The machine is connected and can be seen and tested live. Specifications: Fpodoxgdptopfx Afion Manufacturer: Cidan Model: Forma Year of manufacture: 2018 Working length: 3100 mm Max. bending thickness: Steel (max. sheet thickness): 3.0 mm Stainless steel (max. sheet thickness): 1.9 mm Aluminum (max. sheet thickness): 4.5 mm Upper beam opening height: 195 mm Motor power: 7.9 kW Weight: ~4.7 t Equipment and Features: Control system: Prolink with touchscreen CNC controlled backgauge: U-shape 3–3000 mm Automatic folding beam adjustment Adjustable folding speed Crowning system Two foot pedals Tool storage cart Tooling: Segmented upper tools, height – 125 mm Segmented folding beam tools: 30 mm Tooling length: 2900 mm

Year of construction: 2014, condition: excellent (used), Holzmann TBS 1320 sheet metal shears Holzmann TBS 1320 sheet metal shears Features: - Limiter for precise material setting up to 700mm with a scale, -possibility to set the front stop up to 880mm, - rectangular stop for setting the material on both sides of the working table, -automatic clamp for holding the sheet metal, - easy and friendly work - foot operation. Max. cutting length Fedpsgzzwnjfx Afispn 1320 mm Max. sheet thickness 1 mm Working height 800 mm Weight 545 kg

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: automatic, actuation type: electric, working width: 200 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 300 kg, total length: 2,400 mm, total width: 800 mm, total height: 1,500 mm, Circular shears for cutting sheet metal in coils - Otto Kaiser - 1 cut Ideal for cutting rolls into narrow strips Cutting sheet metal up to 1.5 mm thick (steel ideally up to 1.2 mm) Width up to 200 mm Unwinding and winding of coils Speed ​​regulation via reducer Fsdpfxoxf Trhe Afispn The machine is installed in the factory and can be seen working. In working condition. Little used

Condition: good (used), Year of construction: 1976, number of straightening rollers: 11, working width: 2,500 mm, sheet thickness (max.): 16 mm, overall weight: 46,000 kg, straightening roller diameter: 180 mm, max. sheet width / max. sheet width: 2500 mm max. sheet thickness / max. sheet thickness (St 50): 16 mm min. sheet thickness Blechdicke / min. sheet thickness: 6 mm Anzahl der Richtwalzen /number of straightening rollers: 11 Walzen / rollers Richtwalzendurchmesser/diameter ofstraightening rollers: 180 mm Richtgeschwindigkeit / speed of straightening: 10 - 16 - 20 m / min Throughput speed: 10 m/min Hauptantriebsmotor / power of main motor: 75 kW Gewicht der Maschine / weight of the machine: 46 t Fpsdjxgrf Nspfx Afion

Condition: refurbished (used), Year of construction: 2009, used Timesavers model 22-Series-900-WB with wet extraction Technical data: Year of manufacture: 2009 Machine is completely overhauled – New conveyor belt – New rotary brush Working width: 900 mm Abrasive belt dimensions (W x L): 1900 x 930 mm Machine built in accordance with CE Fpedpfxoxc H Rfe Afion Main switch, emergency stops Disc brake Electrical specifications: Power: 28.05 kW Electrical connections: 3-phase Voltage: 400 V Current: 55 A Frequency: 50 Hz Unit 1: Contact roller unit, Ø150 mm Contact roller 45° Shore Fine adjustment Dial gauge on contact roller Rotational alignment with feed Main motor 7.5 / 15 kW Oscillation Unit 2: Brush unit Brush Ø200 mm “Clean-Strip” 17CS02 polish no. 6 2 directions of rotation Dial gauge Fine adjustment Oscillation Motor 11 kW

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 145200 € 2744.28 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar Fpjdpfx Aswir Daofisn 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPU10/J with pivoting support ring -Clamping range: 50-100 mm Fpjdpfx Aekm Rm Ajfisn -Load capacity: 9 t -Quantity: 1 piece available -Dimensions: 380/110/H460 mm -Weight: 35 kg

Condition: good (used), Number of straightening rolls 5 sheet width 430 mm Sheet thickness 1 mm Top roll diameter 2 Top rolls - Ø 60 mm Bottom rolls diameter 3 Bottom rolls - Ø 60 mm Fpodpfxegvl U Rj Afion

Condition: good (used), Year of construction: 1990, number of straightening rollers: 19, working width: 750 mm, sheet thickness (max.): 12 mm, Year of manufacture / YOM: 1990/ 2023 Overhauled / Overhauled: 2023 Sheet width / Sheet width: Max. 750 mm Sheet thickness / Sheet thickness: approx. 0.5-12 mm Part length in direction of passage / Part length in direction of passage: min. approx. 100mm Feed rate / Feed rate: 2-20 m/min Number of straightening rolls / Number of straightening rolls: 19 pcs Fsdoxgqpmopfx Afijpn Diameter / diameter: 50mm Workpiece infeed height / Workpiece infeed height: 900mm Power requirement / Power requirement: 31kW

Condition: used, Year of construction: 2023, gebraucht 2023 5542 prompt, Zwischenverkauf v Italien 11600 € 1 1300 mm 150 mm 150 mm 250x350 mm 945 mm 0.75 kW 1400 mm 1000 mm Fpedowiryhspfx Afijn 1450 mm 300 kg Demo machine / mint condition Net price (price for new machine € 13.600,00) Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: * The grinding pressure is applied manually. * When deburring from above, the workpieces are pressed onto the high-grip lid. * Fast processing, low costs The brush ensures the rounding of the edges of the workpiece. The standard brushes have a diameter of 150 mm. To deburr the product, use a support pad with a grinding disc. Depending on the height and hardness of the burr, you can set the grinding wheel at a slight angle to allow more pressure on the burr.

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, working width: 2,000 mm, sheet thickness (max.): 10 mm, overall weight: 32,000 kg, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Fsdpfx Ajxgqmfsfiopn Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 57800 € 1092.42 € 1 650 mm 0,5 - 170 mm 670 x 2200 mm 4000 m³/h 120 mm 6 bar 78 (+/-2) dB 22 kW 2600 mm 1350 mm 2100 mm 1125 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Fsdpfxowiquke Afiopn Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 125 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/sek 10 Grinding belt speed m/sek 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 8 Oscillation stroke mm 15 Rotation motor power kW 2,2 Revs 1/min 1000 Oscillation motor power kW 0,4 Grinding brush speed m/sec 10,0 Optional accessories: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5150,00 with Wire Brush 0,3 mm € 6060,00 R GROUP - GRINDING BELT Motor 11 kW € 740,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 incl. OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1770,00 Conveyor belt with vacuum system - 3,0 kW € 5150,00 Additional PVC coated rollers on infeed and outfeed side € 1510,00 Air pressure system for cleaning the conveyor belt € 1290,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4670,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 3200,00 magnetic conveying system - 2 groups, 200 x 200 mm € 12020,00 Dema...

Condition: good (used), Year of construction: 1994, number of straightening rollers: 23, working width: 630 mm, sheet thickness (max.): 6 mm, overall weight: 43,000 kg, straightening roller diameter: 30 mm, max. sheet width: 630 mm max. sheet thickness: 6 mm min. sheet thickness: 0.3 mm number of straightening rollers: 23 rollers diameter of straightening rollers: 30 mm straightening speed: 10 m/min min. workpiece length: 50 mm max. vertical roller distance: 20 mm reading the machine settings: 0.01 mm main drive motor: 6 kW Fjdjxgql Ispfx Afijpn

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, straightening roller diameter: 290 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Fpodpfx Aexgqlbofion Total load: 138 kW