Used Metal Boxes for sale (44,137)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Nwodpfxsz D Taao Af Sel Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here, we offer a complete Desktop Metal 3D printer system. 3D metal printer studio system from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D printer Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell infills for lightweight strength. 1.2 Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Nwodpfx Aszd Tllef Sjl Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles tailored to each design and material ensure uniform heating and cooling without the residual stresses found in laser-based systems. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Maximum bending angle of machine is 135 degrees. Nwjdpfx Ajqxandjf Ssl Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Nwedpfxjz A D Ire Af Sjl Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Condition: used, Swivel bending machine KRAMER, type A-Maut. II 1000 Manufacturer’s serial number: 48 287, year of manufacture: 1990 Useful length: 1060 mm Maximum sheet thickness: 3.75 mm Stroke of the upper die: 180 mm Adjustability of the bending die: 60 mm Rear stop: 480 mm Drive power of the bending die drive: 4 kW Drive power of the upper die drive: 1.5 kW Mains connection: 400 volts, 50 Hz - Manual and semi-automatic control - Angle setting via angle pre-selection dial - One-piece pointed beam, 135° - Rear stop with hand crank adjustment and simple measuring scale - Continuous stop rail - Electric foot switch, 3-way Space requirement: L x W x H: 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Good condition Nedpfefnabysx Af Sowl

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Manual bending machine folding bench sheet metal bending machine with segments Prod Masz is a guarantee of reliability. Click and check our online offer Triple segmented bender SGR-650/1.0mm Nwsdjh H Dk Rjpfx Af Sol Technical specifications: - maximum working width; 650mm - Bending angle max. 160 degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 60kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 50mm Total length: 1m Height: 45cm Price: 1,900 euros Delivery date: every week Delivery costs are PLEASE ASK We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 1x steel container, steel box, crate, metal box with lid 32 units available Dimensions: 120x100x77 cm With lid Hot-dip galvanized Completely closed and sealed bottom Nedpozckfnefx Af Sewl Very good condition, see pictures. Forklift available for loading. Pickup only by appointment in 75053 Gondelsheim. Shipping via freight forwarder is possible, please inquire with your postal code.

Condition: new, Year of construction: 2025, Do you need an efficient and proven bending machine that you will use for years? Look what our satisfied customers write on the website! Prod Masz is a guarantee of reliability. Click and check our online offer Triple segmented bender SGR-650/1.0mm Technical specifications: - maximum working width; 650mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 60kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 50mm Total length: 1m Height: 45cm Nwedpfxeh Atafj Af Sjl Price: 1,900 euros Delivery date: every week Cash on delivery and bank transfer in advance Delivery costs PLEASE ASK We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, controller model: FANUC 32i MB, bar length: 3,200 mm, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Automaton Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning automaton (Swisstype kit) for short and long turning on a single machine. Delivery terms: Free on truck Availability: Immediate - subject to agreement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; we will provide the exact date in advance! Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW TAILSTOCK SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Scope of delivery: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Nsdpfx Aoz A Tbusf Sewl Accessories as shown in the pictures Dimensions & Weight Footprint (L x W x H): approx. 7500 x 1600 x 2500 mm Weight: approx. 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to your destination. ► The goods are sold without any warranty. ► Technical data is subject to change.

Condition: new, Year of construction: 2025, Multi-use, powerful, heavy and very massive segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding bench is characterized by the full segmentation over the entire working length of 1.40M. The upper and lower segments can be removed quickly and easily, and the bending beam is divided into segments. The bending angle is from 0 to 155 degrees. Njdpfx Afjc Swhyo Sjwl Lock with the pedal, the hands are free and you can easily position the sheet metal - open and close with your foot. The folding beam is connected to 2 gas pressure dampers, so the control with the folding beam is incredibly easy. Practical tool box on segments at the rear of the machine. Technical specifications: - Max. Working width; 1400mm - bending angle max. 160 degrees - Max. Sheet metal thickness (steel) 1.5mm - weight 300 kg - segment jaws width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -Gradscala Price: 5700 euros wheels incl. We are looking forward to your contact!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3075419, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, swing diameter over cross slide: 635 mm, turning diameter over bed slide: 1,016 mm, For sale is a HAAS SL-40HE CNC turning center, manufactured in 2006, in a High-Center configuration with a full C-axis and driven tools. This robust CNC turning machine is suitable for demanding turning and milling operations. TECHNICAL DETAILS Travel in X-axis: 432 mm Travel in Z-axis: 1,118 mm Spindle speed max.: 2,400 rpm Swinging diameter over bed: 1,016 mm Nwsdpfszy Npfex Af Sel Swinging diameter over cross slide: 635 mm Bar capacity max.: 101.6 mm C-axis: full C-axis Spindle power: 29.8 kW / 40 hp Spindle nose: A2-8 Spindle bore: approx. 116.8 mm Gearbox: 2-speed Turret capacity: 10 stations Driven tools: yes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 5,500 x 2,300 x 2,300 mm Machine weight approx.: 11,000 kg

Condition: used, Year of construction: 2015, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 55 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 200 mm, table width: 200 mm, table length: 3,200 mm, throat depth: 320 mm, clearance between the columns: 2,530 mm, retraction force: 160 t, oil tank capacity: 200 l, total length: 3,280 mm, total width: 2,700 mm, total height: 2,000 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, We offer a used Metal Technics 3200/160 E200 press brake, manufactured in 2015. The press is currently in operation in a production environment. It operates in an intermittent cycle, in a single-shift mode – 8 hours. Oil is changed regularly. Nodpfxjy Um S Ne Af Sowl Equipment: PRESS BRAKE Model: 3200/160 E200 Serial number: 48342 Year of manufacture: 2015 Motor power: 11 kW Weight: 11500 kg Includes tooling (punches and rotating die). Punch mounting type: Amada. Equipped with light curtains and two backstops. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: new, functionality: fully functional, Year of construction: 2026, bending angle (max.): 135 °, total length: 1,500 mm, total width: 350 mm, total height: 530 mm, warranty duration: 12 months, Manual Sheet Metal Bending Machine The bending machine allows the production of complex profiles and bends. Thanks to the segmental design, it is possible to perform advanced sheet metal forming operations. Our model features an improved construction – thanks to the simple and quick removal of segments, it is possible to bend channels, boxes and similar shapes. The segments on the upper beam are mounted with Allen screws. Tilting by means of a handle Upper clamping beam with a 45° apex angle Easy positioning of the upper clamping beam; removable segments for box bending The machine is equipped with a deflection compensation adjustment system (when bending thicker sheets it eliminates the so-called “banana effect”) Technical Specifications Working length: 1220 mm Maximum sheet thickness: 1.5 mm Maximum opening height: 30 mm Bending angle: 0–135° Dimensions (L × W × H): 1500 × 350 × 530 mm Weight: 165 kg Segments: 5 × 50 mm / 6 × 76 mm / 5 × 102 mm SEGMENT SHEET METAL BENDING MACHINE 1220 × 1.5 MTP 165 KG Delivery Terms The machine is brand new Nodoytfabopfx Af Sswl 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English Delivery to the customer is possible. The delivery cost is determined individually based on the carrier’s quotation. If you are interested in other machines, we encourage you to visit our website.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 39,807 h, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Technical data: Manufacturer: PLASTIC METAL S.p.A. Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Nwedpfozza Egex Af Sol Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Year of construction: 1970, condition: ready for operation (used), A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible. Nwjdpfxey I Adnj Af Ssl

Condition: ready for operation (used), Year of construction: 1973, functionality: fully functional, machine/vehicle number: 162 026, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, table load: 15,000 kg, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 2,000 mm Travel range, Z-axis: 1,250 mm Travel range, W-axis (spindle stroke): 700 mm Table size: 2,000 × 1,500 mm Table load capacity: 15,000 kg Table rotation: 360° Table indexing: 1° Spindle speed: 8–800 rpm Nodpfx Afez Ahabe Sswl MACHINE DETAILS Position measuring system: Heidenhain linear scales EQUIPMENT Heidenhain linear scales

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Nwedpfx Aozy Ndcjf Sol Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Nwsdpfx Aoz Apc Rsf Sel Swinging diameter over bed: 750 mm Swinging diameter over cross slide: 700 mm Distance between centers: 3,000 mm Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Tailstock diameter: 130 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Machine weight: approx. 28,000 kg

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Nwedpfxez Agzqj Af Ssl Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ EQUIPMENT Collets Tool holders Additional accessories

Condition: new, Year of construction: 2025, This model SGR-1250 is characterized by removed upper and lower segments and also the bending beam is divided into segments. In addition, a foot lever is installed to open the upper bending beam. - Segments of an upper and lower clamping arm expand the application possibilities, - Blocking with the help of a pedal, the hands are free and you can freely position a sheet, - bending bench for universal use in repair and bodywork workshops, - compactly built, modernly shaped, - manual bench for standard tasks, - Segments of an upper span increase the flexibility, Technical specifications: - Max. Working width; 1250mm - bending angle max. 160 degrees Nedec Swkhspfx Af Sswl - Max. Sheet metal thickness (steel) 1.5mm - Weight 255 kg - segment jaws width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -Gradscala Price: 5400 euros Wheels inkl. We are looking forward to your contact!

Condition: ready for operation (used), Year of construction: 2021, overall weight: 97 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, number of axes: 3, This 3-axis DESKTOP METAL Metal Studio 2 was manufactured in 2021. It utilizes Bound Metal Deposition technology and features a build volume of 300 x 200 x 200 mm. The machine supports various materials, including 316L and H13 Tool Steel, and operates with a dual extruder system. If you are looking to get high-quality metal 3D printing capabilities, consider the DESKTOP METAL Metal Studio 2 machine we have for sale. Contact us for further details. Nsdpfx Ajyuyz Nof Sjwl • Technology: Bound Metal Deposition (BMD) • Process: 2-step (printing and sintering – no debinder needed) • Build volume: 300 x 200 x 200 mm • Layer height: 50 µm to 250 µm • Build plate: Heated up to 120°C (vacuum-adhered) • Extruders: Dual (metal and ceramic support) • Support interface: Ceramic release layer (manual breakaway) • Materials: 316L, 17-4 PH, 4140, H13 tool steel, copper • Software: Fabricate (automated scaling and sintering profiles) • Connectivity: WiFi / Ethernet Additional equipment • Furnace: Max temperature 1400°C; atmosphere: partial pressure Synthogas (Ar/H2); sintering cycle: 16–24 hours

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Njdpfxez Agzdo Af Sswl Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: new, Year of construction: 2025, This model SGR-1250 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, Nwsdscudl Nepfx Af Sjl - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm - three cheeks are equipped with segment jaws (full segmentation) -application for preset bending angles Technical specifications: - Max. Working width; 1250 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 265 kg

Condition: new, Year of construction: 2025, Bending machine with segments 1000/1.5mm This model SGR-1000mm is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, Njdpfx Afjcxviaj Sewl - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability Technical specifications: - Max. Working width; 1000 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 235 kg - segmentback width 30,40,50,60,70 and 100 mm - casters (moved) inkl. Price excl. shipping We provide invoices with 0% of tax

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Njdpsz Ag A Iofx Af Sowl Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories